Cannot install new Sun Studio July release

Hello Everybody,
when I try to execute the Sunstudio--.sh the following error occurs:
Please wait while Sun Studio is unpacked into this directory.
tail: �+651� kann nicht zum Lesen ge�ffnet werden: No such file or directory
bzcat: /tmp/ssregister.1631/sunstudio.tar.bz2 is not a bzip2 file.
tar: Das sieht nicht wie ein �tar�-Archiv aus.
tar: Fehler beim Beenden, verursacht durch vorhergehende Fehler.
StudioExpress-linux-x86-2008-07-24-ii.sh: line 591: exit: Sun Studio instllation failed.: numeric argument required
I tried to unpack the copied tarfile myself but got same error. Thus, it seems as if the tarfile is damaged. Does anyone get the same error? Or does anyone have a solution yet?

Well, I downloaded the *.sh quite often by now, even using the SunDownloader. Nevertheless I get (after following the hint from your link) this:
Please wait while Sun Studio is unpacked into this directory.
bzcat: Compressed file ends unexpectedly;
perhaps it is corrupted? Possible reason follows.
bzcat: Success
Input file = /tmp/ssregister.8729/sunstudio.tar.bz2, output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
The -tvv flag did not work, but the bzip2recover revealed this:
bzip2recover 1.0.4: extracts blocks from damaged .bz2 files.
bzip2recover: searching for block boundaries ...
block 1 runs from 80 to 448 (incomplete)
bzip2recover: sorry, I couldn't find any block boundaries.
Is the file really corrupt? Am I the only one experiencing this kind of problem?
Does anyone have a clue?
Edited by: corranchetano on Aug 1, 2008 1:33 PM

Similar Messages

Cannot install new version of itunes, cannot remove old version

cannot install new version of itunes, cannot remove old version

http://support.apple.com/kb/ht1925
See this for your query.

Cannot install new itunes

I cannot install new itunes, requires mac os x 10.6.8 and I do not know if this Mac OS version can run on my MacBook (2008 model)

Lion requires
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
If not listed in the on-line store you will have to call Apple to order it

Cannot install new Lightroom. Keep getting error code 58

Cannot install new lightroom CC. Keep getting message of error code 58.

It's usually a better bet with a 2330, but I think we'd better check for disk/file damage on your C drive.
The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After upgrading iphone 5 to iOS 7, I cannot install new apps

After upgrading iphone 5 to iOS 7, I cannot install new apps. I get the message that I must first read and agree to iTunes terms and conditions. I read the terms and conditions online, but I don't see a way to agree when I install or re-install iTunes 11.1. I can update existing apps ok, though.
Anyone have this problem and find solution?

Delete & ReInstall the App Store...

Cannot install Final Cut Studio on new Mac Pro

When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
Shane

Strange C++ error when using newer Sun Studio compiler

My company has just set up a new build machine for our product. We have gone from
this version: CC: Sun C++ 5.7 Patch 117830-11 2007/04/04
to this one: CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
we have also upgraded the OS (solaris/sparc). I think the new one has gcc but the old one doesn't (we don't use it).
and now I am getting this error:
"/opt/SUNWspro/prod/include/CC/./new", line 32: Error, badextlnk: operator new(unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 35: Error, badextlnk: operator delete(void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 37: Error, badextlnk: operator new[](unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 40: Error, badextlnk: operator delete[](void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 53: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 54: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 55: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 56: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 106: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 169: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 185: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 198: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 202: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 206: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 217: Error, badollnk: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 225: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 239: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 249: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 264: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 275: Error, temnotexternc: Template declarations cannot have extern "C" linkage.
I have no idea what could be causing this. I can find one link to it on this forum: http://forums.sun.com/thread.jspa?messageID=9488983 . But the only answer to that query says it is the same as another bug which appears entirely different, not to mention being very old (while talking about an imminent fix), and being related to a different OS and (I think) a different version of sun studio (express vs. normal?).
Any ideas? Could it be related to having gcc/g++ on the machine?

Hi,
I am also facing the same error while upgrading the Sun compiler description as below
when I am compiling the cxx file on the system with compiler version (CC: Sun C++ 5.9 SunOS_sparc 2007/05/03) , I am facing the following error:-
/opt/SUNWspro/bin/CC -dy -misalign -xcode=abs64 -xarch=v9 -D__EXTENSIONS__ -Dsun4_R5=1 -I. -Isun4_R5_v -I/home/as185259/ash_iadraid/ash_get_10/IA/PORT/include -I/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v -I/app/oracle/product/10.2.0/client_1/sqllib/public -I/app/oracle/product/10.2.0/client_1/precomp/public -I/opt/informix/include -DSVR4 -O -g p -pta -c MContext.cxx -o sun4_R5_v/MContext.o || \
(rm -f sun4_R5_v.d; false)CC: Warning: -xarch=v9 is deprecated, use -m64 to create 64-bit programs
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 97: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 99: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 101: Error: Only one of a set of overloaded functions can be extern "C".
"/home/as185259/ash_iadraid/ash_get_10/IA/WV/WV5.3.6-ncr0302/build/include/sun4_R5_v/ssmalloc.h", line 102: Error: Only one of a set of overloaded functions can be extern "C".
4 Error(s) detected.
The same file with the same compilation command is getting compiled with compiler version CC: Sun WorkShop 6 update 2 C+ 5.3 2001/05/15 .
Can anyone suggest what should be the resolution:-
The code for the ssmalloc.h file is as under:-
#ifndef SSMALLOC_H
#define SSMALLOCH
#include <stddef.h>
#if defined(__sparcv9)
namespace ssmalloc {
#endif
#if defined(__cplusplus)
extern "C" {
#endif
The type for the malloc routine depends on
the compiler and library that you are using.
#if defined(hpux) || defined(sun4_R5) || defined(__GNUC_) || defined(_OS2_)
typedef void MALLOC_PTR;
#else
typedef char *MALLOC_PTR;
#endif
#if defined(_GNUG_)
typedef size_t MALLOC_SIZE;
#else
typedef unsigned MALLOC_SIZE;
#endif
#if defined(sun4) && ! defined(_GNUG_)
# define FREE_RETURNS int
# define FREE_RETURN return 0
#else
# define FREE_RETURNS void
# define FREE_RETURN return
#endif
// User-callable routines.
// Note: memalign and valloc are broken in that they do not aling
// memory on documented boundaries, and thus do not behave as described
// on the "malloc" manual page. They simply call malloc.
MALLOC_PTR malloc (MALLOC_SIZE size);
FREE_RETURNS free (MALLOC_PTR data);
MALLOC_PTR realloc (MALLOC_PTR data, MALLOC_SIZE size);
MALLOC_PTR calloc (size_t nelem, size_t elsz);
MALLOC_PTR valloc (unsigned size);
MALLOC_PTR memalign (unsigned alignment, unsigned size);
// This memory allocator supports memory allocation inside signal
// handlers. For correct operation, the following functions must be
// called upon entering and exiting signal handlers that allocate
// memory.
void ssmalloc_enter_signal_level();
void ssmalloc_exit_signal_level();
// Set this variable to not 0 (possibly in the debugger) if you want
// to get malloc to check memory data structures very carefully as it
// goes. This may be handy if you are trying to detect a memory
// trasher.
// It also causes ssmalloc to abort the program instead of returning
// zero if memory runs out.
extern int check_memory_very_carefully;
#if defined(__cplusplus)
#endif
#if defined(__sparcv9)
} // namespace ssmalloc {
#endif
#endif / SSMALLOCH */
The Machine is
root@ldg1-> uname -a
SunOS ldg1 5.10 Generic_138888-03 sun4v sparc SUNW,Sun-Blade-T6320
Thanks
Vijay

Cannot install Logic 8 Studio due to lost v7 USB key

I am wondering if someone can point me to the correct Apple support email address to address my problem. I have scoured these boards and can only seem to find email support for iTunes and iPod (sigh).
I have been a Logic user since the early Emagic days and have upgraded to every major version.
I have all my receipts dating back to Logic 5 from Emagic.
I bought the Apple Logic 7.2 crossgrade in February 2006, and the Logic Studio 8 upgrade in September 2007. At the time, my house was being renovated, so things were in boxes and life was in turmoil.
When I got Logic Studio 8, I installed it successfully on my MacBook Pro using the v8 serial number and the USB key.
Now that my renovations are finished and I've moved back into my house, I need to install v8 Studio onto my G5 tower which has been optimized for my music production. When I went to install it, it asked me for either my earlier serial number (none of my old Emagic numbers worked from earlier Emagic receipt emails) or it asked me to insert my USB key from v7 which appears to have been lost in my move (I have turned the house upside down looking for it).
So I am currently stuck. I cannot install v8 Studio and I would like to contact Apple via email with all my receipts and order information to see if there is anything they can do to help me out. I registered both v7.2 and v8 online during the installation process, but unfortunately (unlike Adobe or Native Instruments) there doesn't seem to be anywhere on the Apple site where I can log in to look up serial numbers for previous registrations.
This is really frustrating. I've spent hundreds (maybe thousands) supporting Logic over the years and I'd be really ****** off if I have to go and buy the full version of Logic 8 again.
So, if any can advise me the best path to follow in contacting Apple about this for assistance, I'd certainly appreciate it.
Thanks in advance for any assistance.

I just got off the phone with Apple support and they were extremely helpful. I explained my situation, and luckily I was armed with every Apple invoice for Logic that I had since it took the product over, and all my earlier emails (circa 2002) with Emagic. I was also 'showing up' in Apple's system so they were able to verify my purchases from my Apple Web Order numbers.
The support agent asked me for my old Emagic XS key number, which I luckily had in a very old email. He then offered me two options: a) I could buy a new Logic 7 dongle for $90, or 2) if I wasn't going to be using Logic 7 anymore, he could generate a new full retail serial number for Logic Studio 1.0 (v8) for me. The latter was my choice, and I do not need to have my old XS key, or any old serial numbers to now install Logic Studio.
I did wait 30 minutes for my call to be answered and about another 10 minutes while the agent went off to check some stuff and generate the new serial number - a small price to pay instead of having to go and buy the whole thing over again!

Cannot install new iTunes (Error 2324)

Installing an iPhone5 on a PC with an old version of iTunes, tried to download new version and came back with error 2324. Tried to uninstall, same error.
Things I have tried:
User has local admin rights,
Have tried microsoft fix on this page: http://support.microsoft.com/mats/Program_Install_and_Uninstall
Tried CCLeaner
Cannot do in safe mode as no installer service running.
If anyone has any ideas please let me know!

I cannot install either and getting same error code 2324. there are some fixes out ther but they all cost money. Apple has gotta come up with a fix. why should we pay another company to be able to download an apple program. I am in a real bind because I need to manage my music for new years party and now I don't have itunes at all. Anyone know how to download an older version?
I HATE the new itunes format too.

Sun Studio 10 Released!

Sun Studio compilers and tools are now available on 64-bit AMD Opteron and SPARC Solaris 10 platforms. With this release, Sun Studio 10 software extends its development environment to the AMD64 architecture and delivers reliable, scalable and high performance applications for the Solaris 10 Operating System. � http://www.sun.com/software/products/studio/index.html

Actually, the implementation of -xpagesize and its friends will not be available on x86 until the next release. Sorry for the confusion.

Cannot get rid of old itunes and cannot install new one!

I just got a new nano today, so i tried to update my old itunes account to the version 7.02. For some odd reason,however, my old version of itunes that was compatible with the mini cannot be uninstalled. Therefore, I cannot install the new version of itunes. What do I do???
Windows XP

For some odd reason,however, my old version of itunes that was compatible with the mini cannot be uninstalled.
do you get an error message if you try to uninstall itunes from Add/Remove programs? if so, what does it say? (include error message numbers if you're getting any.)

Cannot install new software - adobe acrobat 9 pro

Hi
I have just upgraded my system software to Snow Leopard Mac OS X 10.6.3 so that I could install new software - Adobe CS5 Design Premium.
System upgarde went perfectly, installation of all other software in CS5 went perfectly and now all I need to do is install Adobe Acrobat 9 Pro. I drag the folder from the CD into my Applications folder but it does not complete the process of copying it and comes up with the folowing error message:
'The Finder can't complete the operation because some data in Adobe Acrobat Pro can't be read or written (Error code -36)'
Prior to this installation attempt I removed Acrobat 8 as instructions that came with 9 indicated that I needed to do this. The only other info that may be relevant is that this software is an upgrade pack from Adobe CS2, though I did not have CS2 on this particluar computer. It was on a different computer.
regards
Lorna

To download Acrobat 9 Professional :
Go to the web page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=en
Login with your Adobe ID and Password. Now instead of clicking on the download button copy and paste the following link on the address bar and hit enter :http://trials2.adobe.com/Applications/Acrobat/APRO/9/trials/AcroPro90_ efg.exe
This is the direct download link for Acrobat 9.
Note : This link would only work from the downloads page of Acrobat 10.

Cannot install new version of iTunes

I cannot install the newest version of iTunes due to cpu not finding "iTunes.msi"

I cant download either
https://discussions.apple.com/message/15280628#15280628
wish theyd fix it

Cannot install new apps or updates

I keep getting "your apple id has been disabled" message every time I try to do upates or install new apps. My apple id is working because I can sign into itunes with no problem. Can somebody help me please?

Try here:
Why do I see the message "This Apple ID has been disabled for security reasons” when I enter my password?
This message means that someone was unable to sign in to this account multiple times. The Apple ID system will disable the account to prevent unauthorized people from gaining access to your information. You'll need to follow the instructions on My Apple ID to reset your password.

Cannot install new apps to iPad

Hi,
My iTunes doesn't install new apps and few installed apps doesn't show on iPad. "Automatic Install new apps" and "Install" options are grayed out. There is no page 3 on my iPad but my iTunes shows. Please see the attached image and please help!

Both my macbook and windows laptop were authorized to the iPad and it was working fine. But now I get same problem on both the computers. Below are the steps i've already tried:
1. Did all updates.
2. De-authorized all computers and authorized only macbook.
2. Reset iPad through itunes (summary page).
3. Reset using iPad option. General ->Settings -> Reset -> Reset all settings and Reset home screen layout.
4. Reset by holding power & home button.
Even after doing all these reset the issue is same as mentioned above. Any idea?
Raja

Cannot install new Sun Studio July release

Similar Messages

Maybe you are looking for