Cannot install NI-DAQmx on Dell Optiplex 3010

I am trying to install NI Drivers on Dell Optiplex 3010 machines.  We have many of these machines - our IT department appears to have stocked up on them.  During installation of the NI Drivers the installation will simply stop progressing when it hits some % complete (the actual % varies from one installation attempt to the next).  There are no error messages, no timeouts, etc.  - it will simply stay at that point and never progress or stop until the machine is rebooted.
I have traced it down to the NI-DAQmx drivers.  I can install all of the other drivers as long as I don't install NI-DAQmx (or anything that depends on it).  Even just trying to install NI-DAQmx without other drivers that depend on it produces the same issue.  I have not had any driver installation issues on other Win7 machines that are not Optiplex 3010s.
Anybody else see this or have any ideas on how to resolve it?
Thanks in advance,
Devin

Hello dbentley!
Some thoughts:
Sometimes, the windows installers can encounter problems during the installation progress, due to the Windows Update manager. Have you tried installing the required updates on your Windows machine (I'm assuming you are using Windows 7), before installing the NI Drivers?
Are you running the installers from the network? Have you confirmed that there are no network issues (e.g. connection drops) to that machine?
Best regards!
- Johannes

Similar Messages

  • Adobe Acrobat 8 Pro Freezing After Install on Brand New Dell Optiplex 580

    Hello,
    I was wondering if anyone knew of a solution to an issue I am having.
    I installed Adobe Acrobat Pro 8 onto a brand new Dell Optiplex 580 running Windows XP (AntiVirus was not installed yet).  When launching, it freezes 3-5 seconds after opening and I need to open Task Manager to kill the process.
    I have tried:
    Repair install
    Deleteing Preferences folder and letting the program recreate it
    Manually starting and restarting the FLEXnet service
    Running in compatibility mode
    Applying the updates for Adobe Acrobat Pro (up to 8.2.4)
    Running Adobe without background services
    Manually uninstalling and reinstalling
    Thanks for your help in advance,
    Seth
    Message was edited by: ssd008

    Another possibility to check is the free space in the TEMP folder. I believe Acrobat uses the TEMP folder for temporary storage. You might even consider increasing the size of the TEMP folder. At least this is something else to check.

  • Apex giving installation problem on dell optiplex xe system

    Hi
    We have installed apex 4 on dell optiplex xe , but it display the source code when we use page forwared and backward of mozilla firefox. We also use the same versionon our laptpops and other non branded computer , it working fine.
    Regard
    Faiz

    This case is similar to the case handled by Jurgen Keil on Digest Number 385 except that my case, it has a different error message.
    At the prompt "Select type of installation" (or the prompt
    "Select (b)oot or (i)nterpreter:", I type the command "b kadb -d". I see a General Protection Fault and some messages which cause the system to reboot. But I can't capture all the errors/messages cuz there's no system dump device configured.
    How do I configured the system dump device so I can send you more details?
    Thank you.

  • Cannot install firefox. error message: Application failed to initialize properly (0xc0000007b)

    Cannot install firefox. Using Dell Satitude D830 with Windows XP Professional SP3.
    Was having problems with firefox and acrobat so I uninstalled firefox, repaired Acrobat and am now trying to reinstall firefox. No other programs open.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; (R1 1.6); .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Read the other threads on the same topic, or just install the 12.0.1 update.

  • I cannot install itunes on my computer; I keep getting the following message every time:   Could not access network location %PUBLIC%\Desktop\.   I have a DELL Optiplex 750 Desktop Computer, Running Windows 7 Professional, SP1, 64 bit, 3.40 GHZ, 4.0 GBRAM

    I CANNOT INSTALL I-TUNES 64 BIT ON MY COMPUTER.  I HAVE A DELL 750 OPTIPLEX DESKTOP COMPUTER RUNNING WINDOWS 7 PROFESSIONAL SP1, INTEL Q965/Q963 EXPRESS CHIPSET FAMILY.   THE ERROR MESSAGE I KEEP ON GETTING EVERY SINGLE TIME IS:  
    Could not access network location %PUBLIC%\Desktop\.
    ANYONE HAVE AN IDEA ON HOW TO FIX THIS PROBLEM?   THANKS FOR YOUR HELP IN ADVANCE!

    Hello there, jag123059.
    The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Installing Mac OS X on Dell Optiplex

    Hi,
    I have Dell Optiplex machine with Core 2 Duo 2.33 GHz with 2 GB RAM.
    I want to install Mac OS X 10.5.4 on this machine.
    Can I install on it?
    Do I need to install Dell Drivers or Boot Camp is sufficient?
    Thanks in Advance,
    Paavan

    As Camelot said, you cannot do this either legally or reliably enough to depend on the computer for any important task. You are right to worry about driver issues: some of the hardware in Intel based Macs are proprietary, custom-built devices not available to other computer makers so "generic" drivers intended for standard devices will not necessarily work reliably with them.
    Since the devices are proprietary, only Apple could provide reliable drivers for them, & the chances of that happening are essentially zero.
    If you want to run OS X Leopard, run it on a Mac!

  • Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

    Cannot
    install
    software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

    Hi @akcarl 
    What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
    Please post back with some additional detail so I can better assist you. Thanks.
    In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Installed a RAID card in my Dell Inspiron 3847. However, the RAID BIOS does not show up and I cannot install Windows 7 to it.

    That is basically a summary of the problem The Dell Inspiron 3847 does not come with RAID, so I tried installing a PCI-express 1x RAID card. However, the RAID BIOS never shows up. The HDDs show up when I install the RAID controller driver in Windows 7 setup, but I cannot install Windows 7. I am using an IOCrest SY-PEX40008 RAID card with a Silicon Image Sil3124 chipset.
    I tried pressing the hotkeys for the RAID BIOS listed in the card's manual, but it seems to just cause bootup to freeze. BIOS also does not seem to detect the RAID card HDDs as boot options.

    %AppData% is the name of an environment variable.
    On XP that variable points to C:\Documents and Settings\<user>\Application Data\
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
    See http://kb.mozillazine.org/Show_hidden_files_and_folders
    You can use Help > Troubleshooting Information > Profile Directory > Open Containing folder
    See also [[Using the Troubleshooting Information page]]

  • Can I install Mac OS X Tiger 10.4 on a dell Optiplex Gx280?

    Hi! I have a couple of questions which I can't seem to find the answers too.
    1) Can I install Mac OS X Tiger 10.4 on a Dell Optiplex GX280?
    2) Can I take the HDD from the aforementioned Dell and place it in my Power Mac G4 Digital Audio? If so, will Tiger still be on it?
    3) If I can't install Tiger on my Dell, can I rip the DVD drive out and use that to install?
    4) HDD's don't have to be Mac specific, do they?
    Thank you for your valuable time,
    Obiwan-Kenobi

    Can I install Mac OS X Tiger 10.4 on a Dell Optiplex GX280?
    10.4.8 has been done:
    http://wiki.osx86project.org/wiki/index.php/HCL_10.4.8/Desktops
    If you want further info, don't ask here.
    Use Google and search terms "Dell Optiplex GX280 hackintosh" to search the x86 sites.

  • Install SUN Solaris 10 X86 in Dell Optiplex 620 with Broadcom 5751 NIC

    I shall be very grateful if any one would offer his/her advice of the followings:
    1) How do I copy a img file, i.e bcmedu.img which file size is
    1.47MB to a 1.44 diskette when the PC is unable to
    connect to network?
    2) Where can I get a copy of the driver for bcme.bef to be
    install in DELL Optiplex 620 with Broadcom 5751 NIC?
    3) Is there a way to install NIC driver through other media other than diskette in Device Configuration Assistant?
    Note: I have followed the Installation and Configuration Guide provided by SUN and Boardcom but has yet to make the network card detected despited I have been re-installed the OS many times.
    Your great help is much appreciated.
    Regards,
    swee

    i was facing the same problem just hours ago.
    i successfully installed broadcom driver into solaris 10 with Dell GX280
    i copy broadcom driver into a CD and run it on solaris pc.
    i copied out the file into a directory and use pkgadd -d BRCMbcme.pkg and voila. My pc detected the network card.
    Then start configuring your network.
    It works for me. Hope it works for u.
    remember to read the readme file which come with the broadcom driver.

  • Trouble installing Solaris 10(x86) u4 8/07 on a new Dell OptiPlex 755

    Hello All,
    I'm having trouble installing Solaris 10(x86) u4 8/07 on a new Dell OptiPlex 755.
    I have also tried installing opensolaris 9/07 Express Dev snv_70b with the same issue.
    I tried disabling all unnecessary hardware in the BIOS as well.
    After GNU GRUB loads and I select Solaris install after about 20 dots.... I get:
    WARNING: /pci@0,0/pci1028,211@1d, 7
    No SOF interrupts have been received
    this USB EHCI host controller is unusable
    Hardware:
    Dell OptiPlex 755 Small Form Factor, Pentium Dual Core, E2160/1.8GHz1M,800FSB,1GB ram.
    I am only installing Solaris 10 - no other OS will be on the HD.
    Is there any hope for getting SolX installed on this machine or should I return this hardware and by a different model? I have to build 2 pc's with SolX for development boxs.
    Thank you in Advance,
    -M

    Hi Experts,
    I have multiple optiplex 755 Systems and facing the same problem.
    I am not able to install Solaris either 8/07 or Exress 9/07.
    can anybody answer with useful and working solution, on how to solve it, I mean 1. How to get Solaris 9/07 or 8/07 Installed on an Optiplex 755 system
        (basically one with PC1/2 missing for keyboard and Mouse)I am a genuinely concerned guy, so please don't mind the rudeness in this question.
    regards-
    _Jagsir                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Dell optiplex 755 won't boot with NI PCI Fieldbus card installed

    After installing NI Configurator 3.1.0 on new Dell optiplex 755 and then installing the NI PCI Fieldbus card the pc won't boot up.
    This card works fine 745 and older dell pc's.
    Anybody else having this problem?

    Hi,
    In which step does the boot process fail? Is there any error message?
    After installing NI-FBUS 3.1, please go to Windows Device Manager, check whether the driver of PCI-FBUS is correctly installed. There should be no any error in Device Manager.
    You can try the following methods.
    1. Change to another PCI slot.
    2. Use Windows XP. NI-FBUS 3.1 does not support Windows Vista.
    3. If there exist other PCI devices in the system, remove them and try using PCI-FBUS only.
    4. Update the drivers of Dell Optiplex 755 if there are new versions, including video card, ethernet card, etc.
    Feilian (Vince) Shen

  • PCI-FBUS -- Dell Optiplex 760, no video after installing the NI PCI-Fbus card

    I am just beginning the process of upgrading my 30+ production assembly stations currently using NI PCI-FBUS cards with new computers. (our current PCs are HP dc5100) 
    I want to utilize our new desktop standard PC system the Dell Optiplex 760.
    When I install our existing NI PCI-FBUS cards pulled from functional old PCs and place into this new Dell PCs the PC displays no video signa during the boot process.
    I have tried both of the PCI slots on the motherboard, I have upgraded the integrated Intel NIC driver.  I have removed the optional dual head video card from the PCI-E slot and am now using the on-board video. 
    I have run out of things to swap/disable with out correcting the no video issue.
    This is the first problem I have had with the new PCI-FBUS cards.  They have always seem to plug and play until this new PC model.

    Update . ... after swapping the NI PCI-FBUS card with several other PCs, I have determined that card to be defective.  It will not start in the new PCs, the other cards I have tested will.  I think this is isolated to this card only, so I will be contacting NI about repair/replacement of it.

  • Problem with restoring an Image to Dell Optiplex 745

    Hello,
    i try to restore my image to my new Dell Optiplex 745 machines. I am
    using ZFD4.01IR7 with the boot-cd from zenimaging.info which uses the
    zfd7 imaging engine. I am able to restore the image but unfortunately my
    local (and only...) Administrator is not in the Administrators group
    anmyore. The Group membership shows only an SID, perhaps the old
    Administrators SID... So i cannot install drivers for the included NIC
    in order to use DLU for logging in with an Administrator from edir.
    I know that that is an unsupported environment with the mixed versions
    of ZfD but it works for other machines.
    Any help would be appreciated.
    Kind regards,
    Thomas

    On Mon, 26 Feb 2007 15:58:20 GMT, Thomas Degenhardt wrote:
    > The Group membership shows only an SID, perhaps the old
    > Administrators SID... So i cannot install drivers for the included NIC
    > in order to use DLU for logging in with an Administrator from edir.
    hmm.. bring down the image manually, remove the just imaged flag with
    zisedit from ZISD, start windows and check if that helps
    If you have already compiled drivers or have linux.2 please put them on
    http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
    Live BootCd and USB Disk from Mike Charles
    http://forge.novell.com/modules/xfmod/project/?imagingx
    eZie http://forge.novell.com/modules/xfmod/project/?ezie
    Marcus Breiden
    If you are asked to email me information please change -- to - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • NEED HELP error messages - cannot install iTunes upgrade

    I'm running Windows Vista.
    I've been using iTunes for about a year, no problem.
    When I went to download the iTunes latest version I have had nothing but problems. I keep getting this error message on trying to install the upgrade for iTunes, and now I cannot even use iTunes:
    iTunes could not be installed because Visual Basic Script (VBscript) is not installed or has been disabled. Make sure VBscript is installed, turn off script blocking in anti-virus and personal firewall software, re-register VBscript, and then install iTunes.
    I have no idea what that message means and I need step by step directions on how to find out of perform whatever that message means.
    Your help would be GREATLY appreciated.
    Dell Optiplex   Windows Vista   VISTA for Business

    even though the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
    iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

Maybe you are looking for