Cannot install on automounted device: incorrect "too small size" msg

Hi,
To make a nfs mounted install of StarOffice, I change the directory during setup.
I want to use a directory that is nfs automounted so that everybody will hopefully have access to the install. ( If I ever find out how to do a network install. Can't find the doc on it ?)
When I specify the directory in the setup, a pop-up comes saying there is not enough disk space on it, which is wrong. I do not see why the setup program does not detect automounted partition size and to me this is a bug. It was the same with StarOffice 7 and is still not corrected in 8.0
Regards
Fran��ois

Well, admittedly I do not know the answer on Windows. However, on a Mac you can change any font, including the system fonts. However, you need a free third party utility to do it. Download this and play around:
http://www.bresink.de/osx/0TinkerTool/download.html
I'm having the same problem. I have just purchased
the Macbook Pro and the text display on the screen is
too small from the Menu Bar and drop down windows to
the text on Safari, Firefox etc..
Nothing I can do will make it larger.
I can not find anything on the Apple site to explain
how to make it larger.
Any ideas anyone?
Power Mac Mac OS X (10.4.9)

Similar Messages

I have a 22 inch monitor set at 150% but since I installed Firefox, the font is too small and the screen is too small. Cannot make font or screen larger. I can do Control++ each time I enter a page but don't want that to be my solution.

In control panel/display, I had my display set at 150% and at 1680 X 1050 resolution. This filled my 22 inch screen with the page content. Now that I have installed Firefox, the font is too small and the content is centered in the screen leaving about3" per side of blank space. I want to fill the screen and make everything larger. Haven't found a way to do that. Firefox tells me in my control panel/display window that by setting my display at 150%, "some items may not fit in your screen if you choose this setting while your display is set to this resolution. It worked fine with Explorer.

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Cannot install in your devices country

We have just purchasedan Asus Transformer tablet which claims to have support for flash so we tried to download it from the app market but is says it cannot be installed in the devices country. We contacted android market and they say it is the developer not allowing installation in our country. We successfully downloaded on Android 2.1 on another device but cannot do it on this Android 3 device. Please help as this renders the device useless if we cannot have flash and we thought flash player was available worldwide?

I'm getting a very similar result trying to run updateNIDrivers on a 2.6.12 kernel (see my post on Re: NI DAQmx Base on Debian). Does this have to do with a specific kernel version or configuration?
I posted my error message here
- I'm getting the same error for the patched kernel that came with the
linux distribution (ubuntu) and a vanilla kernel. I tried gcc version
2.95, 3.4 and 4.0 but - as mentioned - with the same result. Any ideas? Thanks in advance,
-ingmar-

Cannot install apple mobile device driver

Every time I Attempt to install Apple mobile device driver I get this messasge

Hi Dw,
See #5 in the attached link. Make sure you are downloading the correct version for your Windows Operating System type:
http://support.apple.com/kb/TS1538
Cheers,
GB

Xcode version 4.2.1 required - Cannot Install, OS X 10.8 Too New

There is a reason why I need an Xcode version eariler than 4.3..
I need to install some programs supplied by my university that make use of GIMP toolkit libraries (http://www.gtk.org) for the UI.
GTK has certain prerequisites though, one of which being: I need Xcode installed.
This would be all very well, but GTK contains a Python program called jhbuild which looks for the Xcode GCC Compiler in: /usr/bin and the SDK in /Developer.
Now, am I correct in thinking that the /Developer folder no longer exists for currect versions of Xcode? (version 4.3 +)
That would mean that I'd have to install an eariler version.
After downloading Xcode 4.2.1, I tried installing it to be given an error: 'Xcode can't be installed because the version of OS X is too new.'
So, I don't suppose anyone would know of a solution to this?
Cheers, Jonathon

Read the following, and see if the following steps eliminate the need for an earlier Xcode.
Make sure you have updated to OS X 10.8.2 (including supplement).
Install Xcode 4.5.2 from App Store.
From Xcode 4.5.2 preferences > Downloads > Components, Install the Command Line Tools.
(This puts the compilation environment in the expected /usr/bin location.)
Now, resolve /Developer with a hard link:
sudo ln /Applications/Xcode.app/Contents/Developer /Developer
sudo chown root:wheel /Developer
I cannot promise that the GTK jhbuild won't be checking for other dependencies that the above steps do not correct.
In your startup file, you should add the following to your PATH: /Applications/Xcode.app/Contents/Developer/usr/bin

Cannot install Apple Mobile Device Manager

I love my iphone (It's the first Apple product I've ever bought), but I cannot get it to connect to iTunes on my PC. I get an error message when I first plug in the phone--while it's installing the Apple Mobile Device USB Driver, I get the old "error installing hardware. Your hardware may not work properly".
I have tried everything. I uninstalled iTunes and any Apple applications. Then I disabled ALL programs and services on my computer not relating to running Windows and restarted. Once the computer restarted, I reinstalled the latest version of iTunes, plugged in the iphone, and got the same error.
I don't know what to do next. Any ideas?
I'm running Windows XP pro, with all the latest updates.

I don't know exactly which registry entry you should delete (I don't have a PC any more). Hopefully someone here will chime in with an answer.
I do know that with the iPod you have to make sure you are running iTunes before plugging it in and to click the eject button before disconnecting it, otherwise you will have a boat-load of problems.

Cannot install Apple Mobile Device USB Driver

When I open iTunes my iPhone 4S will not show up as a device. I have tried the advice provided by Apple. I have gone through the iPhone Troubleshooting Assistant. That gave no solutions. I have tried the other solutions offered by Apple. I think that I have possibly identified the problem. As far as I know the Apple Mobile Device USB Driver is not installed on my computer. I have tried to install it but when I do I receive an error message. I repeat the entire error message in the following paragraph. The message appears in a dialogue box with the name: "Update Driver Software - iPhone".
"Windows encountered a problem installing the driver software for your device. Windows found driver software for your device but encountered an error while attempting to install it. Apple Mobile Device USB Driver. Access is denied. If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
I cannot find a solution to this problem on Apple's website. How can I get this driver installed?
My version of iTunes is current. My PC's operating system is Microsoft Windows Vista Home Premium Service Pack 2.

if you haven't resolved that issue , i had the same problem and after 2 days working on it i found a solution , windows security wasn't letting me chage permisions or install any new software here's what i did :
1- control panel
2- system and security
3- under windows firewall click on allow a program over windows firewall
4- what i did was click on every single box there is on private not public
5- click accept , after i went to device manager right click iphone update driver , you shouldn't have the access denied anymore

Printer output incorrect/too small after upgrading to VS 2010 Crystal

I have a Windows Form application that was originally written using .net 3.5 and the version of Crystal Reports that came with Visual Studio 2008. When the VS 2010 release of Crystal Reports came out, I upgraded the application to .net 4/VS 2010 and the new Crystal release.
This application prints checks on blank check stock, so alignment of the output has to be very exact to print the checks correctly. It prints the reports using the PrintToPrinter() method of the ReportDocument class.
In the original version of the program, I had everything aligned correctly in the check report. After updating the application to the latest Crystal release,but making no changes to the report itself, I noticed that the alignment of the checks report was incorrect.
After comparing the output, I was able to determine that the new output is slightly shrunk compared to old output, almost as if it is scaling the report in some way.
I opened the report in the new report designer and verified that all page size and margin settings were correct/the same as before, and they were. The printed output is smaller than it should be based on how the report is designed. I tried adjusted the paper size, and also tried the "Dissociate Formatting Page Size and Printer Paper Size" to see if I could somehow adjust for the scaling, but nothing I tried was successful.
Our check printer is a HP LaserJet 5Si. During my investigation into the problem I discovered that if I printed the report to a pdf printer (PDFCreator) the resulting pdf did not have the same scaling/shrinking problem that I get when the report is sent directly to the LaserJet. I also printed a page from the pdf to the LaserJet using Acrobat Reader, and the output was as I expected it to be.
I only seem to be seeing the scaling/shrinking problem when I send the report directly to the LaserJet. Is there some new setting that I'm overlooking that would be applying some sort of report-wide scaling? Any other ideas as to why this is happening?

Looking for HP LaserJet 5Si at the HP website:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25478&taskId=135
I notice that there are several different types (hm, mx, nx, ...). Also, there are different drivers, depending on the OS.
Ensure that you are using the correct driver (hm, mx, nx, ...) for your printer and for your OS and that the driver has the latest updates from HP.
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

ITS mobile - Screen size on mobile device is too small

Hi,
I'm not able to change the screen size of my ITS Mobile application.
If somebody can help me ...
Here are the data:
Internet service parameters
~DYNPRO_COMPRESSION : 1
~GENERATEDDYNPRO : 0
~ITSMOBILE : 1
~ITSMOBILEELEMFACTOR : 9
~ITSMOBILEELEMUNITS : px
~SOURCES : ZSAPLOG_MOBILE,ITSGENMOBILE4
~THEME : 99
~TRANSACTION : ZSAPLOG_MOBILE
Internet service templatesGenerating style: MOBILE4 (Mobile Device (No HTML tables))
ICF service - GUI Configuration
~THEME : 99
~TRANSACTION : ZSAPLOG_MOBILE
~ITSMOBILE : 1
~SOURCES : ZSAPLOG,ITSGENMOBILE4
~ITSMOBILEELEMFACTOR : 9
~ITSMOBILEELEMUNITS : px
~POPUPS : 1
~SHOW_SYSTEM_MODAL : 1
~STYLE : DHTML
LRFMDscreen size is set to 16x20ITS
Versions
SAP_BASIS : SAPKB73108
SAP NETWEAVER : SAP EHP3 FOR 7.0
Mobile device
Model : PIDION HM50 E
CPU : Samsung Electronics(R) S5PV210
OS : WEHH 6.5 Professional
VER : Windows CE 5.2.29077
Thanks for your help
Philippe

Perhaps an option to set the default font for discussion threads in the user preferences would be the best idea. One would think however that the Jive developers would have come up with something like that already.
For what it's worth:
http://www.w3.org/QA/Tips/font-size
Do not specify the font-size in pt, or other absolute length units for screen stylesheets. They render inconsistently across platforms and can't be resized by the User Agent (e.g browser). Keep the usage of such units for styling on media with fixed and known physical properties (e.g print).
Once again, I wonder about Jive development. Anyway, 10 pt is not best practice. It's standard for printed media, but not for screens. A search in Google shows that most recommend 16 pixels or more. Not sure what this is in points. I think 10 points is about 12 pixels, depending on screen dpi/ppi. I cannot imagine how tiny 10 pt must look on any of the high resolution Retina displays, which have twice or more density than conventional 72 dpi.

I tunes 11.1.04 Cannot Install Apple Mobile Device Support. Help!

After about three days of uninstalling and reinstalling everthing to do with Apple on my pc (Windows 8.1) starting with the MSVCR80.dll problem, I have arrived at a position in which Itunes will play music and contact the store, but it won't link to my Ipod, my Iphone or my Ipad, because Apple Mobile Device Support is not there.
In each of my many clean installs of 11.1.04, the installation of that one component rolled back. When I tried installing AMDS from 11.1.04 on its own, it rolled back. When I tried a clean install of 11.1.03 to see if that would help, AMDS again rolled back.
I have run scannow which identified some corrupt Windows files (no doubt wrecked somewhere in the course of the disaster) and then restorehealth, which fixed them. But AMDS still rolls back: "The installer encountered errors before Itunes could be configured. Errors occured during installation. Your system has not been modified."
I have wasted hours on this, I have exhausted every approach I can think of, and all the relevant sources of support I've been able to track. I would be very grateful for any advice anyone can offer.

See also Troubleshooting issues with iTunes for Windows updates if you haven't already done so.
After uninstalling iTunes and the related components it is useful to physically delete any files that may remain in the specified locations before attempting to reinstall.
If that still doesn't work you could try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AMDS might not install right now, but you may get a more useful error message as to why not, and you might be able to run iTunes even if you can't update your devices at this stage.
Make sure you download a fresh copy of the installer as it was updated some time after the initial release.
tt2

I am having a problem resizing my game My Vineyard in Facebook. I cannot get it to reduce to a smaller size so I can see everything. I contacted the site and they told me the problem is with Firefox. How can I correct this problem.

my toggle button to make my game screen smaller does not work. how can this problem be corrected.

See the [[page zoom]] article, it shows how to resize individual pages.

I cannot read your e-mail to me as the e-mail is too small

''duplicate - https://support.mozilla.com/en-US/questions/902425''
You sent me an e-mail and I cannot read it because it is too small, I need to know how to fix it so it is the normal size. I cannot read anything on the e-mail at all.

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom

Characters in Photoshop 8 too small

After installing Photoshop 8 successfully in my new computer equipped with Win 8.1, the characters are too small (size 6 and 8), so are the tool icons. In my old computer equipped with Win XP, the characters were normal (size 10 and 11) nd icons larger. I arranged in Win 8.1 that all display's characters have the size 10 or 11. Photoshop 8 doesn't follow it. How to make it display the same sizes as it is in the other applications which follow suite? Thank you.
Regars,
Petar Volkov, E-mail: [email protected]

Sounds like you have a high resolution display. The Photoshop user interface has the same number of pixels it always had. Its just thatthe you pixels on your high resolution display are much smaller then the ones on your old low resolution display. Your old display had a resolution around 100 DPI your new display had a resolution around 300DPI so everything is 1/3 the width and 1/3the height of your 100 dpi display 1/9 the size you use to.
Adobe is working on making their PC UI adjustable to be useable on high resolution displays. Like they did in the Mac Photoshop version. For now Attach a external display to your laptop. All desktop display have low resolution around 100DPI. Photoshop will not be the only application you will have problems with.

Spotlight results window too small

When I do a Spotlight search and then click on "Show All", it opens a small Finder window. Too small to read full file names. If I click on the green plus button in the upper left, it makes it taller, but not wider. So I have to drag the lower right corner to widen it, and then re-size the columns so I can see full file names.
If I close the window, the next time I open a Spotlight search, it defaults to the same too-small size.
This happens every time.
Is there any way I can change this default and save the size and column spread I want?

I just created a new account and the result was the same: the "Show All" results window opens up very small and has to be manually re-sized.
Is there a system-wide preference file that can be changed for that, or am I stuck with it?

Suddenly iTunes doesn´t work. Trying to reinstall I get error messages: "R6034 attempt to load C runtime library incorrectly", "Cannot start Apple Mobile device", "Not installed correctly Error7 (Windows error 1114)". What to do?

Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Cannot install on automounted device: incorrect "too small size" msg

Similar Messages

Maybe you are looking for