Cannot install on MacBook Pro

I just purchased the Adobe Creative Suite CS6. I cannot install it on my Mac Book Pro because it says it is for a Windows operating system. I did not see another version for Macs. What should I do?

Wher did you buy it? If you ended up with the Windows version, you will have to exchange it. Contact sales support by web chat or phone, assuming you bought directly from Adobe. Otehrwise get in touch with your reseller.
Mylenium

Similar Messages

  • What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    What is largest solid state drive I can install in MacBook Pro 8,2?  I want to perform a clean install of Mavricks and dump my old hard drive.

    If the bank account permits, I suggest getting a 1 TB SSD anyway.  One cannot have too much storage. 
    Unless you are having issues with your current installation, a 'clean' install is not necessary.  It would be more efficient to clone your current drive to the new SSD, test it, and then do the swap.  The installation of Mavericks over Snow Leopard can be done either before or after the cloning process.
    Ciao.

  • Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

    Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

    What may have happened is an error and a kernel panic, filling up the logfiles.
    What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
    And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.   
    If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
    Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
    If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
    If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
    Here's more on kernel panics:
    http://www.macmaps.com/kernelpanic.html*

  • Will icloud install on macbook pro with os 10.6.8

    Will icloud install on macbook pro with OS 10.6.8?

    Welcome to the Apple community.
    iCloud is not an application you can download and install independently. It is part of the OS X 10.7.2 operating system. So in essence no you cannot use iCloud with OS X 10.6.8 on your Mac.

  • I cannot sync my MacBook Pro address book (Mac OS X Version 10.5.8) with my iPad that has iCloud. Please help.

    I cannot sync my MacBook Pro address book (Mac OS X Version 10.5.8) with my iPad, that has iCloud. I can get my music and photos to sync, but not my address book or calendar. I have tried turning off iCloud, but that does not work. Please help.

    You may install Snow Leopard OS, maximize the RAM to 8 GB and install a larger HDD, or spend a lot of money and install a SSD.
    Ciao.

  • I cannot start my MacBook Pro 15" even after many try's.

    I cannot start my MacBook Pro 15" even after many try's. Could it be due to not ejecting my external hard drive, or have just installed the airport express. Urgent help would be appreciated.

    Run throught this list of fixes
    ..Step by Step to fix your Mac

  • I want to re-install my Pre-Installed Lion Macbook Pro, but I can't get the Lion OS from App Store with my Apple ID. Please help, thanks!

    Hi, I want to do a clean re-installation of my end 2011 Macbook Pro which comes with pre-installed Lion OS. I go through the installation steps and after App Store verified my Apple ID, it prompted me that I did not purchase the Lion OS. I am very surprise to see this message which my pre-installed Lion Macbook Pro should have it. Please help and advise how can I get the OS? All other bundle softwares were in the purchase record except the Lion OS.

    That was my mistake - sorry - it IS Command-R to boot to the Recovery disk, not Command-D: I either just hit the wrong key or am just now coming awake from my nap.
    Let me see if I can just explain it in a few steps - I don't know of any link (but it would make a good User Tip):
    Create an up-to-the minute back-up of your internal hard drive using an external hard drive and Time Machine.
    Boot to your recovery partion - holding down Command-R on boot.
    Use Disk Utility to erase Macintosh HD - use one GUID partition and format as "Mac OS Extended (Journaled)". Unless you're selling the machine, there's no need to do a secure erase (which can take hours).
    After you erase the disk, re-install Lion from the same Recovery partition.
    After installation is complete, reboot, again holding down the Command-R keys to boot into the Recovery Partition.
    Restore your Time Machine back-up. This could take several hours.
    Reboot after restore and you're back in business.
    That should take care of everything - all you need is an Internet connection.
    Call back if I didn't explain things too well - at least I got the Command-R right this time!
    Clinton

  • OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013

    OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
    OS X Mavericks 10.9.1 installer is available in the App Store but it can't be downloaded because "OS X Mavericks can't be installed on this computer".
    If the installer of version 10.9 is already in the application folder it can't be updated for the same reason.
    I've seen that they are two versions of the updater that are downloadable from apple's website and one is specific for the MacBook Pro retina late 2013.
    I suspect that the installer in the App Store is not an universal installer. It is stupid because you can't reinstall that Mac is needed.
    I phoned to Apple (AppleCare) and they don't know why this happens.

    Hello,
    Try to boot the 15" MBPr as target when connected to your MBA (if you have the right cables and adapters).
    From the MBA, install on the 15" MBPr's disk, in that order :
    The 10.9.1 update for Mavericks except MBPr
    Download
    and then the 10.9.1 update for Mavericks specific for MBPr
    Download
    The MBPr should be bootable again. I did it for an external HD.
    Hope this helps.
    Best,
    ÉrIC Miclo

  • I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

    I cannot get my MacBook Pro to print greyscale on my Canon MG6450. I cannot access the printer driver panel on the Macbook. So I am stuck printing everything in colour and cannot specify which pages I want printed.

    Try resetting the printing system:
    OS X Mavericks: Reset the printing system
    Next try deleting the system and reinstall the printer..
    BTW this is Mac Pro desktop forum

  • I cannot get my Macbook Pro retina to connect to my BT Home hub.

    Hi,
    I cannot get my Macbook Pro Retina to connect to my BT homehub either wirelessly or through ethernet using the thunderbolt adaptor.  I know that this is a problem with my IP address as in Network Settings it tells me that
    'Thunderbolt Ethernet has a self-assigned IP address and will not be able to connect to the Internet.'
    I know that my internet connection is fine as I can plug the ethernet cable back into my PC and it works fine.  Also, my phone and ipad connect wirelessly just fine.
    Bt have told me to contact Apple, but I can't get hold of Apple till tomorrow.
    Amyone know how to overcome this?
    I did also find my IP address and enter it manually, at which point netwrok settings showed my ethernet connection as green and connected, but it still wasn't working.
    Thanks

    Same for wifi.  I have put in my IP address manually for the wifi network and it has gone green and connects to the hub, but gives me an exclamation mark on the wifi bar and still doesnt connect to the internet.
    I am writing this whilst connected to the internet on the same laptop but connected to BTFON which is a really slow public network I have access to as a BT customer.

  • Cannot install Adobe Acrobat Pro on Windows XP

    Good day,
    I cannot install Adobe Acrobat Pro on my windows XP machine with SP2 and the latest updates.
    The error says that the software cannot be installed on the Operating system, please see minimum requirements. I meet all these but cannot install
    I saw a similar question posted on the forums but it is unanswered.
    Please assist me.
    Wesley

    Hi,
    This link has the minimum system requirements for Acrobat 10 Pro : Acrobat X Pro Tech Specs
    On Windows XP, the minimum requirement is SP3 for 32 bit. I would recommend that you update to SP3 by running Windows Update and then reinstall the application.

  • I cannot open My MacBook pro

    i cannot open my macbook pro. It only loads halfway and stays there

    If you don't already have a current backup of all data, you must try to back up now, before you do anything else. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If the machine is connected to the network via Ethernet, disconnect the cable.
    If it's connected via Wi-Fi, try to start up in Recovery mode. Select
              Turn Wi-Fi Off
    from the Wi-Fi menu in the menu bar.
    Try again to restart as usual. While disconnected from the network, you won't be able to log in to a network account on an Open Directory or Active Directory server, but you may be able to log in to an account local to the machine. Post your results.

  • I cannot mirror my macbook pro with my tv,there is no tab to select in display settings

    i cannot mirror my macbook pro with apple tv,there is no tab to select in display settings

    That's because the mirror setting, known as Airplay does not work with Mac OS X 10.7.5.
    You need 10.8 or later and a
    AirPlay Mirroring is available with iPad 2 or later; iPad mini; iPhone 4s; iPhone 5; iPod touch (5th generation); and iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer) with Mountain Lion.
    Source:
    https://www.apple.com/airplay/
    Note, Mac OS X 10.9.2 has issues with Airplay, and is the only really secure version of 10.9 at the present time.
    Alternatives to the 10.8 restriction, and 10.9 are listed here:
    https://discussions.apple.com/docs/DOC-2821

  • After Mountain Lion install, my MacBook Pro's fan is running non-stop.

    After Mountain Lion install, my MacBook Pro's fan is running non-stop and you can hear the insides working extra hard. Is this normal? It's very loud and annoying?

    http://support.apple.com/kb/HT3964?viewlocale=en_US

  • Application very slow to installing on macbook pro , why?

    application very slow to installing on macbook pro , why?

    Spider.007 is correct, here is my current setup:
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 vfat EFI 70D6-1701
    ├─sda2 hfsplus Macintosh SSD 956c7127-1bde-348b-9fb5-1b79cd05a4ad
    ├─sda3 hfsplus Recovery HD 4fa05f80-9ed0-3fc2-82eb-dbd6e4bd4b12
    └─sda4 ext4 f741fbee-f3b0-4a95-b9b8-f35f4b4c28af /
    sr0
    Last edited by SilverOne (2014-05-04 01:12:50)

Maybe you are looking for

  • Creating space on SSD on my Mac Book Pro 10.9.5

    Running out of space on  MBP  2.7 GHZ intel core i7  16 GB 1600 Mhz DDR3 Available: 100.100.01 GB (100,007,829,504 bytes)   Capacity: 499.499.42 GB (499,418,034,176 bytes)  Tried to delete photos that on reading in other forums should be stored off t

  • UPDATE STATEMENT GETTING FAILED

    Hi Can you specify me condition in which case update statement will fail and exception will be handled I wanted to know that Lets says I have a procedure procedure p1 is begin update emp set deptno=50; end; can you suggest me when will update stateme

  • Problem  inserting date using the date function

    Hi there, I am getting this error The value "#CREATEODBCDATE(StartDate)#" could not be converted to a date. I used different methods including the Now() function but getting always the converted to a date error. The database fields are set to datetim

  • Circles underneath the back glass of iPhone 4?

    Hello fellow iPhone lovers! I own an iPhone 4. In some time, i've noticed that i have some bubbles on the inside of the backside glass of it. Here's a picture: http://img641.imageshack.us/i/imag0056r.jpg/ Then yesterday evening i noticed, that i wher

  • How can i fix  sorry, an unexpected error occured. Please try again later. Error code:-1012 (NSURLEErrorDomain)

    guys, im having problem when logging to facebook using my ipad2.. it has a pprompt message of; "Sorry, an unespected error occured. Please try again later. Error Code:-1012 (NSURLEErrorDomain)" how can i fix this error? need your help and inputs.. re