Cannot INstall Oracle 9i client

When im starting the installer for oracle client 9i firs tthe welcome page is displayed alongwith the deinstall and the installed products options and also the next button.When i click on the next button to start the installation it does not take me to the next screen and it doesnt even throw out any error.
I am trying the installation on windows 2000 already have oracle client 8.0 was running fine on my pc.
Please help in the installation.
Thanks
Regards
Vivek Khanna

Please repost this question to the Database>>Installation forum. Good luck!

Similar Messages

Installed Oracle Workflow Client but database connection fails,why?

Hi
I have installed Oracle Workflow Client (windows) but database connection using apps user (EBS R12 database) is not establishing.Getting the following error '1300:Could not load'. How can i make succesfull connection & use it?
Regards
Ariz

Hi,
Please see these documents.
Note: 389432.1 - 2.6.x: Access the Builder errors with 1300, 1114, 1101, 333, 332, 306 & 203: Value contains leading or trailing spaces
Note: 747485.1 - Oracle Workflow Builder: Could not load from database Error
Note: 179987.1 - Workflow Builder Cannot Load Objects From Applications when the NLS_LANG is Non-American
Regards,
Hussein

Unable to install Oracle XE Client on Ubuntu 8.04 - "no such user"

Hi,
I've just installed Oracle XE client on my desktop machine (64bit Ubuntu 8.04), and I had to manually create some users and groups:
sudo groupadd nobody
sudo groupadd oinstall
sudo useradd -s /bin/bash -g oinstall -G dba oracle
sudo passwd oracle
before the install would complete, due to what appears to be incorrect arguments to useradd by the installer.
It took quite a lot of hunting to find the above, and I'm a little concerned since no one else seems to have had the same problems.
I installed using:
$ sudo dpkg -i --force-architecture oracle-xe-client_10.2.0.1-1.0_i386.deb
(the force-architecture was required for the server install on my server, so I did the same here)
I read the install instructions on the oracle pages
(http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm#BABFEDEI) and didn't see anything about having to manually create these accounts, and I seem to have followed the rest of the instructions correctly.
What did I do wrong? I'm probably going to have to do it again sometime, and I'm a little concerned that I might have just been causing trouble for myself by doing those extra manual steps.
Note that I had to provide a password for the oracle user; how does oracle manage to log in using this account, since I didn't have to provide it anywhere?
Any help/advice would be appreciated,
many thanks,
William
BTW I'm really not happy with the preview/post message thing in this forum; I'm using Firefox 3.0.1 and if you use preview then the back button clears the entire text (yay, thanks!); I tried to be more cunning next time, and use the back button instead, but then none of the "preview", "post message" and "cancel" buttons work... so this was my third attempt at writing this message, and it's somewhat shorter than the original, like my patience :p

BTW I'm really not happy with the preview/post
message thing in this forum; I'm using Firefox 3.0.1
and if you use preview then the back button clears
the entire text (yay, thanks!); I tried to be more
cunning next time, and use the back button instead,
but then none of the "preview", "post message" and
"cancel" buttons work...It's not Firefox related - same issue with other browsers.
Please put your entry regarding this into this thread:
Preview not working correctly - works now
That's the right place for this issue...
Cheers!

Cannot install oracle 9i on linux (fedora core 2)

dear all members.
I cannot install oracle 9i on linux (fedora core 2)
progress bar stop at 17% no activity at hardisk. I wait for 15 hours , still no movement. file being copy is " naeet.o " , I am not sure how importance is it.
I try several times, but still similar result....
Amnuay U.
[email protected]

Hi,
I think that Feedbak forum is not the best place for this problem.
You should ask this into
=> Installation Forum : Database Installation
or
=> Linux Forum : Generic Linux
Anyway, you can find an install doc here :
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
Nicolas.

How to install Oracle 817 Client on Redhat Linux7.2

I try to install oracle 817 client on a dell server running Redhat Linux7.2, the installer won't start. Are there any pre-requisites I have to set for client install to work on linux? Does 817 installer work on Linux7.2?
Thanks,
Joe

Joe,
I have the same issue. It's probably due to an incompatibility of the jdk 1.1.8 on the CD.
Have you tried using another one ? http://www.blackdown.org/
Rgds,
Franck

How to install Oracle 9i Client in RHEL 4.0 Upate 1

Where can I find a tep by step process of installing Oracle 9i client 9.2.0.7.0 on linux rhel 4 AS -Update 1
-SP

As Jer said. Just follow the documentation at http://tahiti.oracle.com or (better in this case) first steps from http://www.puschitz.com. I said fist steps because you need to do some workarounds to start OUI installer. Once OUI installer started then choose "Client install" opion.

Problems Installing Oracle 9i Client

I got problems while I'm trying to Install Oracle 9i Client on a Windows 98 PC.
When I run Setup.exe file, nothing happens, I cant See Setup dialogs.
Somebody knows what is happening.
I appreciate some help
Best regards

This was posted by someone else sometime ago. I'm posting it again for your reference. hope this helps.
raja
You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY

Installing Oracle 9i client on remote PC with out using distrib on cd-rom

Hello!
I have a such problem. I must install oracle client on a remote PC with no user assistant (with out usin cd-rom, I must use distrib from local hard drive).
When I trying to launch setup file ORACLE 9i from Hard drive I have an error abut using java.
So that I want to ask. may be some one knew ho to install Oracle 9i client from distrib which dispose on local hard drive???

Hi,
The minimum supported version for windows 7 is 10.2.0.5. Unsupported version may work, but it will create unexpected issues.
How to Install Oracle 10gR2 on MS Windows 7/Windows 2008R2 (Doc ID 1173433.1)
Thanks,
Krishna

Installing Oracle 8i client tools on Windows 2K Advanced Server SP2

I am having issues with installing Oracle 8i client tools on W2K Advanced Server SP2. The CD I have is labeled Oracle 8i Enterprise Edition, Release 3 (8.1.7) Win NT/2000 CSI# 2224188. The error message I get is that a dependency exist on having ORACLE.SWD.JRE 1.1.8.10.0 installed and the universal installer cant find it. The disk has a folder named ORACL.SWD.JRE with a subfolder named 1.1.7.30 which leads me to believe that the version of the file that shipped with this media is version 1.1.7.30.
Questions:
1. Why would Larry ship a CD with the wrong version of a file...just venting.
2. Where do I get the correct version?
3. How do I install it?
Any help would be appreciated.
Kurt

Oracle8i on PIV
If you have Pentium IV do following: find file symcjit.dll file in the oracle installation folder and rename it to symcjit.old.
try to run setup.exe located in the install/win32 folder.
Oracle9i on W2K
Install service pack 2 or higher
Virtual memory between 800 and 900 MB ( Recommended )
if for any cause setup.exe does not make anything,
try to make click on autorun.exe
Joel P�rez

Installing Oracle 11gR2 client from a batch file and it returns before done

Hello,
While installing Oracle 11gR2 client on XP and 7 from a batch file. When it launches the OUI from the batch file, it returns to the batch file before the installer finishes. So, there is no way for my script to know when the installer is done, or to glean a return code to test for success. This is particularly annoying...
I've also used the "call" command to force my batch file to wait, to no avail. Anyone have any clues about this one?
Thanks in advance!
--Robert

Srini,
Awesome! Worked like a charm.
Many thanks!
--Robert

Unable tu install Oracle 9i Client on Win XP Professional

Hello!
I have problems installing Oracle 9i Client on Windows XP Professional. The error appears when I try launching the setup.exe file from the "Disk1" folder on my HD. The message error says something like "I can't run the set up". If somebody have any ideas please help me.

double click autorun.exe in the autorun folder.

Installing Oracle 9i client

When i am trying to install Oracle 9i client in my system , i am getting error like ...
The Oracle HOme is not Valid. Oracle names must be 16 characters or less and contain alphanumeric characters or _
I am giving my home like ...
OraClient10g_home2 --- this is the name i am giving ..
C:\Oracle\product\10.1.0\Client_2 (PATH)...
could some one tell me what is the problem i have ...

You have the answer in your post only.
>> OraClient10g_home2 --- this is the name i am giving
OraClient10g_home2 = 18 Characters
The Oracle HOme is not Valid. Oracle names must be 16 characters or less and contain alphanumeric characters or _
So, try to give the home name less than or equal to 16 characters.
i.e.
OraClnt10gHome2
Regards,
Sabdar Syed.

Cannot install oracle vpn on linux getting error kernel-sourcecode is neede

cannot install oracle vpn on linux getting error kernel-sourcecode is needed by gds_cisco_vpn_client-2.0-llrhel4.i386.. i already installed kernel-devel still it get the same error. pls help.

1. kernel (.rpm)
2. kernel-devel (.rpm) - containing only Makefiles and some kernel header files
3. kernel source rpm (src.rpm) - source for rebuilding the kernel
4. kernel-sourcecode (.rpm) - source-tree for developing custom kernels
are four different packages.
If you are running OEL-4 (2.6.9 kernel) and you have an ULN account, you can download kernel-sourcecode rpm from ULN. There is no kernel-sourcecode for OEL-5 available on ULN site.
NJ

Cannot install Oracle 10g rel. 2 on Win Server 2003 SB

Hello,
I cannot install Oracle 10g rel. 2 on Win Server 2003 SB, because when the the configuration assistant installer try to copy the db files, it stop with the following errors:
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN errorRegards
Siyavuş

You should be connected as a local administrator to perform the install process.
Try to perfom a software only install, then once you make sure the installation was successful, launch the dbca. It is important for you to use a local account to perform the installation and db setup process, otherwise, if you have authentication problems, even if you comment the authentication line at the sqlnet.ora file you will be facing issues that will make fail the assistant, since it is designed to work assuming the user is OS authenticated.
~ Madrid
http://hrivera99.blogspot.com/

I cannot install Cisco VPN Client 64-bit in windows 8

Hi
I bought new laptop which is preinstalled with widows 8 EM OS.. But for my usage i need to install cisco vpn client (64-bit version) software in my windows 8 EM OS.. which i cannot proceed actually because of the following error :
Error 28000 : Before installing the cisco systems vpn client 5.0.7.0290, you must uninstall the previous version of cisco systems vpn client 5.0.7.0290, using the Add/Remove program files option in the control panel, then restart your system
Following the above popup again a popup prompts displaying :
I have tried to uninstall the program from control panel but i could not find vpn client installed in my system at all... Please give me suggestion how to uninstall and install the new one..
Could you please advise how i can resolve the above issue and setup Cisco vpn client in my windows 8 OS? your reply is more worthy to carry on my work...

Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application. If you have a question about another technology (such as Windows), you can ask in another forum. If you're unsure which forum, a Bing search often works the fastest or ask
here: http://social.microsoft.com/Forums/en-US/whatforum/threads
However, I'd ask in the
Windows 8 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Cannot INstall Oracle 9i client

Similar Messages

Maybe you are looking for