Cannot Install PB Runtime 12.0 or 12.5 on Windows 8 Server 2008 R2
Greetings All!!
I am trying to set up a new server for deployment and when I run either the PB Runtime for 12.0 or 12.5 I get an error stating (in general) module pbjvm120.dll failed to register.
I am also having this problem with another Windows 2008 Server install. I had to move on with the last one, but I need this one up and running now so I am asking for advice/help.
I attached a screenshot of the error.
Thanks all!!
Best,
Paul
Thanks Gentlmen!!
I don't know how the '8' in Windows 8 Server 2008 R2 got in there, but it is just Windows Server 2008 R2.
I copied msvcr71.dll , msvcp71.dll and atl71.dll to the c:\windows\system32 directory. Tried again and got the same error as shown in my screenshot. This 'is' a VM. I am logged into the machine as Administrator.
Chris, what do you mean by official MR?
I am creating the runtime files using the PB Runtime Packager.
Thank you!!
Paul
Similar Messages
-
Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
HassanYou said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet. -
How to Install AS 10g version 10.1.2.3 on Windows server 2008 64bit
Dear
Exparts, Hope you are fine.
Application Server: Standalone 10.1.2.3
OS: Windows Server 2008 64bit
Hardware: Intel Xeion ProcessorI know Oracle Application Server 10g & Standalone my version is 10.1.2.3 is not competible with Windows Server 2008 64bit.
But i need to install. Have any one has successfull experiances to do so ?
Please share and guide.
Waiting for your valuable responses.
ask2learnDear Marcus,
Thanks for your reply.
I tried Application Server Stand Alone and success.
So, i closed the thread. -
ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64
Hi!
I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
OS: Windows Server 2008 R2 x64 Standard
RAM: 2 GB
Free Space: 100 GB
Virtual Memory: 16384 MB
Environment Variables:
CPIC_MAX_CONV = 200
JAVA_HOME = JDK 1.5 64 Bits
On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
ERROR 2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
INFO 2010-06-16 12:17:57.968
Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
WARNING 2010-06-16 12:18:28.593
Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
INFO 2010-06-16 12:18:28.609
Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
ERROR 2010-06-16 12:18:28.640
CJS-30197 . DIAGNOSIS: For more details see output of log file:
ERROR 2010-06-16 12:18:28.968
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
WARNING 2010-06-16 12:18:29.125
Could not get property IDs of the JavaScript object.
ERROR 2010-06-16 12:18:29.125
FJS-00010 Could not get value for property
Best Regards,
DavidHi All,
As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
You are opt for 2 options
1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
Thanks,
Lijin Xavier -
Unable to install lan realtek rtl8101 and network controller driver on windows server 2008
Hi Guys,
i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
Hp device Model.:- hp pavilion g4 1303au
Model no.:- 5c03213jsh
network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
Name: PCI Device
Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
Name: SM Bus Controller
Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
thanks,
Amit RaiHi:
SMBus controller:
Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install.
Download and unzip the file.
Go to the device manager and click on the smbus controller needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Ethernet: Download and install the 1st driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader (PCI dev.): Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
Wireless: You will have to try the Vista driver for the Atheros wireless card...
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
Attachments:
sp66185.zip 7 KB -
Unable to install SAP B1 on Windows server 2008 R2
Hi
I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Thanks & Regards
RPWindows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
Hi Gordon ,
It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
But searching in the forms , i have seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
Thanks in advance
Regards
RP -
How to install oracle 10g in windows server 2008
I want to install oracle 10 (10.2.0.4.0) in windows server 2008 R2 X64 bit version.
Previously i have test this successfully. But not it's giving an error during the installation
Enterprise manager configuratio failed due to the following error-
Error starting Database Control
Refer the log file at (path).....\emConfig.log for more details.
You can retery configuring this database wlth Enterprise Manager later by manually running (path).....\bin\emca script.
I tried to start the service manually from services. But it didn't work.
I tried to run that script using command prompt. but nothing happened.
in my start menu under oracle home db-console link also not there.
here is my log file
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
************Certificate was added to keystore
Certificate reply was installed in keystore
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_AX-2009_AX2009\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">
<!-- The default web-app for this site, bound to the root -->
<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />
<!-- Access Log, where requests are logged to -->
<access-log path="../log/http-web-access.log"/>
<!-- Uncomment this if you want to use ODL logging capabilities
<odl-access-log path="../log/http-web-access" max-file-size="1000" max-directory-size="10000"/>
-->
<ssl-config needs-client-auth="false" keystore="D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_AX-2009_AX2009/config/server/keystore.test" keystore-password="BC062AD3D852A5B5D02E979B69DD12B3" />
</web-site>
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleAX2009
Feb 7, 2011 11:54:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:54:58 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:08 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:18 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:28 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:38 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleAX2009' to fully start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\AX2009\emConfig.log for more details.
Feb 7, 2011 11:55:48 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)
please if any one can give me any solution to run my database console. i don't know any method. i'm new to the oracle.
Thank youI have checked that. but i also say that oracle 10g (10.2.0.4 ) support for windows server 2008 r2 X64.
Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.4 or later) for Windows x64 is certified on Windows Server 2008 x64 (all editions). 32-bit Oracle Database Client (10.2.0.4) and higher versions are supported on Windows Server 2008 x64.
I don'y think it's problem of os version or oracle version. Because when we purchase we asked from them what is the recommended version for our os. they told that 10g 10.2.0.4 is ok. previously i have installed this successfully. But now i can't.
however thanks for tried to help me. if u can find out any other reason\s please late me know..
thank you very much. -
Install Sharepoint 2013 Foundation on Windows Server 2008 R2
Could anyone please help me with the steps to install the Sharepoint 2013 foundation (including SQL express) with Windows Server 2008 R2 ?
You just need to download Foundation, run the pre-req installer, then run the setup executable, select Single Server, and this will install both SQL Express and Foundation. This isn't typically a 'recommended' setup, but it is an easy one.
Trevor Seward, MCC
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Installing Forms 11g 64bit on Windows Server 2008 64bit
Hi,
we are trying to install Forms 11g 64 bit with WebLogic 64bit on windows Server 2008 64bit and followed the short checklist of Jan Carlin :
- installed JDK 64bit
- installed WLS1032-generic
- started installation of Forms/Reports
Installation of Software worked fine and the configuration part did create the domain, but starting the domain fails (hang).
Info in Log-File :
=========================================================
oracle.as.provisioning.util.ConfigException:
Fehler beim Starten der Domain.
Cause:
Zeitüberschreitung beim Starten von Admin_Server.
Action:
Weitere Informationen finden Sie in den Logs.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3142)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1647)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:637)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
[2010-02-22T19:37:39.730+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 20] [ecid: 0000IRqToJA5uXW5Pzw0yd1BWefv00000B,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
================================================
Somewhere I've read that the reason might be that the installation uses 32bit JDK, but I don't know if I did something wrong.
Somewhere else I've read that the reason could be the Path setting, which may include some directories with emphasis in the name which might be a problem for Weblogic.
Any idea or help is appreciated.
Thanks,
MarkFYI,
This is related to Oracle-Bug 9370799 which hopefulls get sorted out sometimes. Having "(" or ")" somewhere in the PATH is not working. The workaround til the Bug is solved as of support is :
=================================
1) Remove the directory with "(" ")" from the System Path at install time only (this is what you have already performed)
2) Roll back the change so the System Path contains again the directory path with parenthesis
3) Copy in the clipboard the current PATH value and edit the <Middleware Home>\wlserver_10.3\common\bin\commEnv.cmd file and look for the following line:
if "%WL_USE_X86DLL%" == "true" set PATH=%PATCH_PATH%;%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%ANT_HOME%\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%PATH%;%WL_HOME%\server\native\win\32\oci920_8
4) Before this line define PATH to value you have in the clipboard without the reference to the directory with "(" and ")"
5) Save the commEnv.cmd and you should be able to start up your domain having the directory containing the "(" and ")" in the System Path
==================================
Thanks for your replies,
Mark -
Hi, I have exhaused my research and ways of fixing this issue.
I have a Windows Server 2008 (64-bit).
I am able to install 64-bit CF10 on it and CF websites run just fine.
On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
When installing CF10 32 bit, I always got error message:
Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
ISAPI Extensions
ISAPI Filter
ASP.NET
CGI
but I alway got the above error message. Cannot think of other reasons.
Any help is really appreciated!!! I have been working on this thing for the past three working days.
Regards.Hi,
I saw your post which is similar to the problem I'm trying to solve. I'm not sure if I need to post a new topic, but I thought just add it to your post.
I installed CF10-64bit on Windows 2008 server (64 bit). When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred. Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1. After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications". I created another application pool for this application. It woks fine. However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
In order for my application to work, it seems that I need to install the CF10 32 bit version. Am I right? Or is there a work around for my issue?
Thanks in advance for any help.
I'm going to create a new post for this.
Message was edited by: tibay -
Cannot install WINS Server Role on Windows Server 2008 R2 Standard x64
Hi,
We are trying to install WINS Server Feature on a brand new Windows Server 2008 R2 Standard x64 (Virtual Machine). It seems that WINS is getting installed and right at the very end it gives an error 0x80070002.
We have tried rebooting the server multiple times , DNS/DHCP roles have been installed successfully as
well . It is just the WINS server feature that we are unable to install on this server.
Can someone point us to right direction. Are there any pre requisites we need to ensure before installing this feature. Are there any alternate ways to install
the WINS feature .. if yes please let us know.The error indicates a File was not found:
C:\Users\Mark\Documents\Tools>err 0x80070002
# for hex 0x80070002 / decimal -2147024894
COR_E_FILENOTFOUND
corerror.h
# MessageText:
DIERR_NOTFOUND
dinput.h
DIERR_OBJECTNOTFOUND
dinput.h
STIERR_OBJECTNOTFOUND
stierr.h
# as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND
winerror.h
# The system cannot find the file specified.
# 5 matches found for "0x80070002"
I would check a few things:
1) Is the OS activated (Control Panel/System)
2) Is the OS fully patched and has it been rebooted since it was patched? -
VC Redist 2013 cannot be installed on Windows Server 2008 Core
Both vcredist_x86.exe and vcredist_x64.exe have this problem. And it can be reproduced 100%.
But all of them can be installed on Windows Server 2008 R2 Core, Windows Server 2012 Core, and Windows Server 2012 R2 Core.
From the log, it seems the installer depends some UI DLLs that are not included in this OS.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
Is it a bug or by design?
The following is the failed log:
[060C:0608][2015-04-15T02:18:41]i001: Burn v3.7.2829.0, Windows v6.0 (Build 6002: Service Pack 2), path: c:\vcredist_x86.exe, cmdline: '-burn.unelevated BurnPipe.{51C9AFD1-AA72-4BA2-8B12-E93691AFD7E3} {1B953492-AB47-43FA-A2BF-E1505C76194D} 3908'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleOriginalSource' to value 'c:\vcredist_x86.exe'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501'
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
[060C:0608][2015-04-15T02:18:41]i500: Shutting down, exit code: 0x4005
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleAction = 5
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleElevated = 1
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleInstalled = 0
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleLog = C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleManufacturer = Microsoft Corporation
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleName = Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleOriginalSource = c:\vcredist_x86.exe
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleProviderKey = {f65db027-aff3-4070-886a-0d87064aabb1}
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleTag =
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleVersion = 12.0.30501.0
[060C:0608][2015-04-15T02:18:41]i007: Exit code: 0x4005, restarting: No
XiaojinHi Xiaojin,
Thanks for posting in MSDN.
I don't think this is a bug. From your description, you want to install VC redist on some servers core for Windows Server 2008, 2012. Based on my knowledge, server core has no graphical user interface (GUI), there is no desktop. Only code written using Windows
application programming interfaces (APIs) can run on Server Core.
More information about server core please refer to here:
What Is Server Core?
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot install SQL Server Native Client 2012 on Windows Server 2008 Data Center
Is it possible to install SQL Server Native Client 11.0 (SQL Server 2012) on Windows Server 2008 Datacenter?
I tried to install it, but I get this error message:
"Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation."
Based on this article (http://msdn.microsoft.com/en-us/library/cc280356.aspx), I see one of the supported operating system is Windows Server 2008.Hello,
Can you try to download and install Windows Server 2008 Service Pack 2 from the following link, and then reinstall the SQL Server Native Client 11.0 again?
http://www.microsoft.com/en-in/download/details.aspx?id=16468
Microsoft SQL Server 2012 Native Client is included in the SQL Server 2012 Feature Pack. Based on the requirement of
the download page , you should apply SP2 for Windows Server 2008.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Cannot install WSUS in Windows Server 2008
Hi.
I want to install WSUS in Windows Server 2008 R2 Enterprise, but when it try I have a prompt to upgrade Web Services (IIS), then I have a Fail message.
Here is the HTML File log:
<Informational>: This server might need to be restarted after the installation completes.
Web Server (IIS)
<Informational>: Find out more about Windows System Resource Manager (WSRM) and how it can help optimize CPU usage
Web Server
Application Development
ASP.NET
.NET Extensibility
ISAPI Extensions
ISAPI Filters
Security
Windows Authentication
Performance
Dynamic Content Compression
Management Tools
IIS 6 Management Compatibility
IIS 6 Metabase Compatibility
Windows Server Update Services
Web Server (IIS): Installation failed
The following role services were not installed:
Web Server
Application Development
ASP.NET
.NET Extensibility
ISAPI Extensions
ISAPI Filters
Security
Windows Authentication
Performance
Dynamic Content Compression
Management Tools
IIS 6 Management Compatibility
IIS 6 Metabase Compatibility
Windows Server Update Services: Installation failed
<Error>: The update could not be found. There may be a network connection issue. Click here for more information.
Please refer to the full log at: 'C:\Windows\logs\ServerManager.log'
And the .log file log is here:
2988: 2009-07-14 09:19:42.125 [InstallationProgressPage] Loading progress page...
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Creating WindowsUpdateDownloader.
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Searching for Updates...
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Starting asynchronous download.
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader] Creating session.
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader] Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader] Searching....
2988: 2009-07-14 09:19:51.328 [WindowsUpdateDownloader] Initial search failed, try again on WU server.
2988: 2009-07-14 09:19:52.843 [WindowsUpdateDownloader] Search returned: Succeeded, found 0 updates.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Search completed, result: Succeeded.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Downloading...
2988: 2009-07-14 09:19:52.843 [WindowsUpdateDownloader] Sending failure DownloadComplete event.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Download completed, result: NotStarted.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for more information.</a>'
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Invoking LoadFinishPage.
2988: 2009-07-14 09:19:52.859 [InstallationProgressPage] About to load finish page...
2988: 2009-07-14 09:19:52.859 [InstallationFinishPage] Loading finish page
2988: 2009-07-14 09:19:52.875 [InstallationFinishPage] Finish page loaded
I checked my Internet Connection, and no problems with that, Wndows update works fine.
RegardsThe reason these solutions all work is because previously these machines were WSUS CLIENTS, and thus looking to the (sometimes no longer present) WSUS SERVER to find the WSUS Dynamic Installer update.
By unlinking the GPO or moving the server to the Computer Container (not OU, btw), you effectively revert that machine to being an Automatic Updates client, and it can then obtain the WSUS Dynamic Installer update from Automatic
Updates.
You can also achieve this objective by:
1. Run gpupdate /force (to reset the 90 minute GPRefresh timer).
2. Edit the registry and set the HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU "UseWUServer" value to ZERO, which also disables the machine as a WSUS Client.
From there you'll have at least sixty minutes (minimum GPrefresh interval) to install the WSUS Role, after which the machine will automatically revert back to the previous "WSUS Client" status -- which, presumably, is to be a client of itself.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com -
Problem installing sharepoint foundation 2013 on windows server 2008 r2
anybody has experience installing sharepoint 2013 on windows server 2008 r2? I failed to install it even if I have all the latest patches installed and the sql server 2012 express installed. it keeps failing to install the prerequisites.
• Microsoft .NET Framework 4.5: equivalent products already installed (no action taken)
• Windows Management Framework 3.0: was already installed (no action taken)
• Application Server Role, Web Server (IIS) Role: configuration error
• Microsoft SQL Server 2008 R2 SP1 Native Client: Installation skipped
• Windows Identity Foundation (KB974405): Installation skipped
• Microsoft Sync Framework Runtime v1.0 SP1 (x64): Installation skipped
• Windows Server AppFabric: Installation skipped
• Microsoft Identity Extensions: Installation skipped
• Microsoft Information Protection and Control Client: Installation skipped
• Microsoft WCF Data Services 5.0: Installation skipped
• Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763): Installation skipped
log file:
2014-04-30 17:32:32 - Processor architecture is (9)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Common Startup
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-04-30 17:32:32 - Trying to remove the startup task if there is any.
2014-04-30 17:32:32 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-04-30 17:32:32 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-04-30 17:32:32 - Locating the following command line arguments file:
2014-04-30 17:32:32 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-04-30 17:32:32 - Error: This file does not exist
2014-04-30 17:32:32 - Details of the current operating system:
2014-04-30 17:32:32 - Major version number of the operating system: (6)
2014-04-30 17:32:32 - Minor version number of the operating system: (1)
2014-04-30 17:32:32 - Build number of the operating system: (0X1DB1=7601)
2014-04-30 17:32:32 - Major version number of the latest Service Pack: (1)
2014-04-30 17:32:32 - Minor version number of the latest Service Pack: (0)
2014-04-30 17:32:32 - Platform ID of the operating system: (2)
2014-04-30 17:32:32 - Product suites available on the operating system: (0X10=16)
2014-04-30 17:32:32 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-04-30 17:32:32 - Product type: (0X21=33)
2014-04-30 17:32:32 - OS type: (0)
2014-04-30 17:32:32 - Configuring the application's property sheet...
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Management Framework 3.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - PowerShellVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - 3.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - CTPVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:32 - Could not find or unable to read CTPVersion key
2014-04-30 17:32:32 - The prerequisite above is already installed
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft .NET Framework 4.5
2014-04-30 17:32:32 - Reading the following DWORD value/name...
2014-04-30 17:32:32 - Install
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:32 - The value is (1)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:32 - The value is...
2014-04-30 17:32:32 - 4.5.50938
2014-04-30 17:32:32 - A post release .NET 4.5 is installed
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-04-30 17:32:32 - Reading version of the following file...
2014-04-30 17:32:32 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-04-30 17:32:32 - GetFileVersionInfoSize failed (-2147024894)
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Server AppFabric
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - ProductVersion
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft Information Protection and Control Client
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 -
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Microsoft WCF Data Services 5.0
2014-04-30 17:32:32 - Reading the following string value/name...
2014-04-30 17:32:32 - Version
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-04-30 17:32:32 - Check whether the following prerequisite is installed:
2014-04-30 17:32:32 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-04-30 17:32:32 - Reading the following DWORD value/name...
2014-04-30 17:32:32 - IsInstalled
2014-04-30 17:32:32 - from the following registry location...
2014-04-30 17:32:32 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-04-30 17:32:38 - Beginning download/installation
2014-04-30 17:32:38 - Created thread for installer
2014-04-30 17:32:38 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\Pre2AD9.tmp.XML"
2014-04-30 17:32:38 - Install process returned (0X3EB=1003)
2014-04-30 17:32:38 - [In HRESULT format] (0X800703EB=-2147023893)
2014-04-30 17:32:38 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2014-04-30 17:32:39 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:40 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:41 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:42 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:43 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:44 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:53 - Install process returned (0)
2014-04-30 17:32:53 - [In HRESULT format] (0)
2014-04-30 17:32:53 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2014-04-30 17:32:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-04-30 17:32:57 - Install process returned (-2146646015)
2014-04-30 17:32:57 - [In HRESULT format] (-2146646015)
2014-04-30 17:32:57 - Error when enabling ASP.NET v4.0.30319
2014-04-30 17:32:57 - Last return code (-2146646015)
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - Flags
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - PendingFileRenameOperations
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-04-30 17:32:57 - Reading the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-04-30 17:32:57 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-04-30 17:32:57 - Last return code (-2146646015)
2014-04-30 17:32:57 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-04-30 17:32:57 - Cannot retry
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Management Framework 3.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - PowerShellVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:57 - The value is...
2014-04-30 17:32:57 - 3.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - CTPVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-04-30 17:32:57 - Could not find or unable to read CTPVersion key
2014-04-30 17:32:57 - The prerequisite above is already installed
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft .NET Framework 4.5
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - Install
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:57 - The value is (1)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-04-30 17:32:57 - The value is...
2014-04-30 17:32:57 - 4.5.50938
2014-04-30 17:32:57 - A post release .NET 4.5 is installed
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-04-30 17:32:57 - Reading version of the following file...
2014-04-30 17:32:57 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-04-30 17:32:57 - GetFileVersionInfoSize failed (-2147024894)
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Server AppFabric
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - ProductVersion
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Windows Identity Foundation (KB974405)
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft Information Protection and Control Client
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 -
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Microsoft WCF Data Services 5.0
2014-04-30 17:32:57 - Reading the following string value/name...
2014-04-30 17:32:57 - Version
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-04-30 17:32:57 - Check whether the following prerequisite is installed:
2014-04-30 17:32:57 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-04-30 17:32:57 - Reading the following DWORD value/name...
2014-04-30 17:32:57 - IsInstalled
2014-04-30 17:32:57 - from the following registry location...
2014-04-30 17:32:57 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-04-30 17:33:21 - Opening log file
2014-04-30 17:33:21 - Opened action for user
2014-04-30 17:33:21 - C:\Users\ADMINI~1\AppData\Local\Temp\1\prerequisiteinstaller.2014.04.30-17.32.32.log2014-06-20 08:18:39 - Processor architecture is (9)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Common Startup
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-20 08:18:39 - Trying to remove the startup task if there is any.
2014-06-20 08:18:39 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-20 08:18:39 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-20 08:18:39 - Locating the following command line arguments file:
2014-06-20 08:18:39 - C:\Program Files (x86)\MSECache\SharePoint2010\PrerequisiteInstaller.Arguments.txt
2014-06-20 08:18:39 - Error: This file does not exist
2014-06-20 08:18:39 - Details of the current operating system:
2014-06-20 08:18:39 - Major version number of the operating system: (6)
2014-06-20 08:18:39 - Minor version number of the operating system: (1)
2014-06-20 08:18:39 - Build number of the operating system: (0X1DB1=7601)
2014-06-20 08:18:39 - Major version number of the latest Service Pack: (1)
2014-06-20 08:18:39 - Minor version number of the latest Service Pack: (0)
2014-06-20 08:18:39 - Platform ID of the operating system: (2)
2014-06-20 08:18:39 - Product suites available on the operating system: (0X10=16)
2014-06-20 08:18:39 - Product type of the operating system: VER_NT_DOMAIN_CONROLLER
2014-06-20 08:18:39 - Product type: (0X21=33)
2014-06-20 08:18:39 - OS type: (0)
2014-06-20 08:18:39 - Configuring the application's property sheet...
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Management Framework 3.0
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - PowerShellVersion
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 4.0
2014-06-20 08:18:39 - A higher version of the prerequisite above is already installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft .NET Framework 4.5
2014-06-20 08:18:39 - Reading the following DWORD value/name...
2014-06-20 08:18:39 - Install
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:18:39 - The value is (1)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Version
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 4.5.50938
2014-06-20 08:18:39 - A post release .NET 4.5 is installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Identity Foundation (KB974405)
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 -
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 6.1.7600.0
2014-06-20 08:18:39 - The prerequisite above is already installed
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-20 08:18:39 - Reading version of the following file...
2014-06-20 08:18:39 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-20 08:18:39 - The version is...
2014-06-20 08:18:39 - 1.0.1215.0
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:39 - Version
2014-06-20 08:18:39 - from the following registry location...
2014-06-20 08:18:39 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-20 08:18:39 - The value is...
2014-06-20 08:18:39 - 10.0.1600.22
2014-06-20 08:18:39 - Check whether the following prerequisite is installed:
2014-06-20 08:18:39 - Windows Server AppFabric
2014-06-20 08:18:39 - Reading the following string value/name...
2014-06-20 08:18:40 - ProductVersion
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Windows Identity Foundation (KB974405)
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 -
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Microsoft Information Protection and Control Client
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 -
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Microsoft WCF Data Services 5.0
2014-06-20 08:18:40 - Reading the following string value/name...
2014-06-20 08:18:40 - Version
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-20 08:18:40 - Check whether the following prerequisite is installed:
2014-06-20 08:18:40 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-20 08:18:40 - Reading the following DWORD value/name...
2014-06-20 08:18:40 - IsInstalled
2014-06-20 08:18:40 - from the following registry location...
2014-06-20 08:18:40 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-20 08:18:44 - Beginning download/installation
2014-06-20 08:18:44 - Created thread for installer
2014-06-20 08:18:44 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\Pre6515.tmp.XML"
2014-06-20 08:18:45 - Install process returned (0X3EB=1003)
2014-06-20 08:18:45 - [In HRESULT format] (0X800703EB=-2147023893)
2014-06-20 08:18:45 - "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe" -i
2014-06-20 08:18:45 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:46 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:47 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:48 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:49 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:50 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:51 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:52 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:53 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:54 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:55 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:56 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:57 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:58 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:18:59 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:00 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:01 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:02 - Install process returned (0)
2014-06-20 08:19:02 - [In HRESULT format] (0)
2014-06-20 08:19:02 - "C:\Windows\system32\cscript.exe" "C:\Windows\system32\iisext.vbs" /enext "ASP.NET v4.0.30319"
2014-06-20 08:19:02 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:03 - Request for install time of Application Server Role, Web Server (IIS) Role
2014-06-20 08:19:04 - Install process returned (-2146646015)
2014-06-20 08:19:04 - [In HRESULT format] (-2146646015)
2014-06-20 08:19:04 - Error when enabling ASP.NET v4.0.30319
2014-06-20 08:19:04 - Last return code (-2146646015)
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - Flags
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - PendingFileRenameOperations
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-20 08:19:04 - Reading the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-20 08:19:04 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-20 08:19:04 - Last return code (-2146646015)
2014-06-20 08:19:04 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-20 08:19:04 - Cannot retry
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Management Framework 3.0
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - PowerShellVersion
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 4.0
2014-06-20 08:19:04 - A higher version of the prerequisite above is already installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft .NET Framework 4.5
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - Install
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:19:04 - The value is (1)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 4.5.50938
2014-06-20 08:19:04 - A post release .NET 4.5 is installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Identity Foundation (KB974405)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 6.1.7600.0
2014-06-20 08:19:04 - The prerequisite above is already installed
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-20 08:19:04 - Reading version of the following file...
2014-06-20 08:19:04 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-20 08:19:04 - The version is...
2014-06-20 08:19:04 - 1.0.1215.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-20 08:19:04 - The value is...
2014-06-20 08:19:04 - 10.0.1600.22
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Server AppFabric
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - ProductVersion
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Windows Identity Foundation (KB974405)
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft Information Protection and Control Client
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 -
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Microsoft WCF Data Services 5.0
2014-06-20 08:19:04 - Reading the following string value/name...
2014-06-20 08:19:04 - Version
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-20 08:19:04 - Check whether the following prerequisite is installed:
2014-06-20 08:19:04 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-20 08:19:04 - Reading the following DWORD value/name...
2014-06-20 08:19:04 - IsInstalled
2014-06-20 08:19:04 - from the following registry location...
2014-06-20 08:19:04 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-20 08:19:45 - Opening log file
2014-06-20 08:19:45 - Opened action for user
2014-06-20 08:19:45 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.20-08.18.39.log
Maybe you are looking for
-
Account detrmn error ..?
Hi all Can anybody explain me ,while doing Goods receipt after production i m getting error " TSCA GBB 0002 AUF 1320 is not possible". In OBYC, what is G/L acc i have to give , wher i can get excat G/L acc for the goods movement. While posting this m
-
Hi I have MS Word 2000 and Acrobat Pro 8. I have created a merge document and have the data in an Excel 2000 worksheet. The merge has been tested in Word and is fine. In the Acrobat help it says I can create a Word mail merge, automatically name and
-
Firewire network fails when I turn Airport on
1. I want to network two tiger machines via firewire, for backup purposes. After I've connected via firewire (manually via "Go" menu, since nothing else works), I turn my Airport back on, and it dismounts the connected volume. Why is this happening,
-
Frieght should appear in both header and item levels
Hi SAP gurus, while doing the Sales Order transaction(va01), frieght should appear in both header and item levels, how can we configure in SAP. Thanks in advance. Sathya........
-
Finding rotation of degrees of text
I have found vertical flow of text by using PDWordGetAttrEx(thisWord, 0) & WXE_VERTICAL_FLOW,if(PDWordGetAttrEx(thisWord, 0) & WXE_ROTATED) Please help me to find out the degree of rotation of text in pdf,i want to exact degrees.