Cannot install power saver on new OS

Hi there,
I have problems with Toshiba Power Saver.
I have bought my Laptop in Austria with German windows. But I installed the english version and there came the problem. Everything worked except 2 utilities. I tried to install them from the recovery CD but they doesn't work.
So i installed Toshiba power saver but it didnt run. When i click on control panel and Toshiba power saver, comes the message:
"Cannot open because you dont have access rights to run Toshiba Power Saver" I am logged on as the administrator.
So I dont know. I tried to download them from internet but the problem still remains. In german XP media center edition everything works, but in my XP with SP2 no.

Hi Raymon
In my opinion you should post at first which notebook model you have exactly.
Anyway, for installation of single tools and utilities you can not use recovery CD because there is installations image. For single tools or utilities you can use Tools & Utilities CD or download them from download page.
If I am understood your posting right the Power saver is preinstalled on your unit but you can not use it. Because of that you must not try to install it again. Please be sure that you are logged in as administrator and not as user with limited permissions.
I have tested it on my unit and just if I am logged as limited user I can not start power saver. As administrator I can do what I want.

Similar Messages

Portege R700 - Installed Power Saver on Windows 7 64bit

Hi,
I was looking for a way to reduse fan noise on a Win7 Portege R700-174 and read to install "Power Saver" from the Toshiba support site.
Installation was OK, but I cannot use ist because Common Module is not installed. I get an error "Code: 0x2". I already understand that "Power Saver" and "Common Module" is not intended for windows 7. Why have I been able to install it anyway?
Now when I try to remove "Power Saver" i get yet another error and uninstall fails.
What can I do? Any help is appreciated!
Regards
Michael

Hey,
Toshiba Common Modules and Power Saver are designed for Windows XP only! This software isnt compatible to Vista and Windows 7. In this case you have to install Value Added Package.
Anyway, not its too late and you must remove the installed software. If you get an error while uninstalling I would recommend using CCleaner to remove the programs. CCleaner can also uninstall all software that you have installed and its freeware tool. Do a Google search to download it and try uninstalling the Toshiba tools again.
Check this!!!

Cannot install CS3 on my new computer

hi, i cannot install CS3 on my new computer due to the fact that i did not deactivate is on my old laptop. to which i dont have acces any more.. can anyone help finding a solution?

Have you tried installing it or are you just assuming you cannot. You are normally allowed to install and activate on two machines.
You will need to contact Adobe support thru chat in order to get assistance with deactivating the inaccessible installation. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html

Cannot install any application from new Winows market.

Cannot install any application from new Winows market. I click "Install" and... that's all... nothing more...
P.S. I am on domain network.

Hi and welcome to Apple Discussions.
Don't worry, no special etiquette, we're all friends here
What was the software that you installed that claims to "enhance the speed of your system"? The logical thing to do would be to uninstall the application and hope that it hasn't caused wider ranging problems. The SW, if only halfway reputable, should have come with uninstall instructions. Follow the instructions, reboot and see if your download problem is fixed.
WRT to the slowing down that prompted your (misguided) installation of this SW there are many things that may be the culprit but the most common and easiest to fix is the remaining space on your HD. What size is your HD and how much free space is there? This info can be obtained by selecting your HD and keying Command (Apple) + I (the letter 'eye').
Post back with the SW concerned and the remaining space and we can take it from there.
Good luck,
Adrian

Cannot install blackberry link on new Q10 as crashes with fatal error DRIVER_IRQL_NOT_LESS_OR_EQUAL (ndis.sys)

I cannot install blackberry link on new Q10 as repeatedly crashes with fatal error DRIVER_IRQL_NOT_LESS_OR_EQUAL (ndis.sys) makes blackberry Q10 phone pretty useless!! Is there any other way to transfer content from PC to Blackberry?? Will blackberry fix this problem- cannot find any solutions on Google. Thanks
Solved!
Go to Solution.

Hello Black55
Welcome to http://supportforums.blackberry.com/
You can tell which version you have installed Blackberry Link
Respect al error that you listed, you are likely to mistake the sea tu windows corrupt.
Regards.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Tecra M10 - Can't uninstall or install Power Saver code 0x0

Hi folks,
on my new Tecra M10, after logging in I get a Fatal Error message "Toshiba Power Saver. Fatal error has ocured. This program will terminate. code 0x0.
I cannot install a new download of power saver until I UN-install the existing.
When I try to UN-install via Control panel, I get the same fatal error.

Hi
Friend of me had the same problem and he told me that it was possible to remove Toshiba Power Saver in safe mode. Therefore go in advanced boot menu and select safe mode. After this try removing Power Saver as normal.
Check this!
Furthermore you could try removing Power Saver using an additional tool like CCleaner. This is a very nice tool where you can remove programs and optimize the registry. I like this freeware program.

Cannot install office 2008 on new Macbook pro.

I have just received my new macbook pro 17 inch. I"ve installed the bundled apps cd, but when I try to install Mac Office 2008, I receive the following error:
Microsoft office for Mac can't be installed on this disk. newer-version-installed message.
I'm running Snow leopard 10.6.4 and have only installed firefox and AIM besides the software that came with the mac.
I've searched the Mac and cannot find any reference to Microsoft or office 2008. I've also gone through the "Remove office 2008 manually" from the Microsoft website and again have not found any files or folders they referred to.
Does anyone know what else I can do to solve this issue?

Hi baltwo,
However, running Remove Office might do the trick.
I mentioned it anyway because I've seen posts in the past here where the same thing happened. The OP had manually deleted everything they could find, but still couldn't install without either running the Remove Office tool, or going the Draconian route and formatting the drive, reinstalling everything from scratch.
I think that happens if you've opened any Office trial app. It must put a hidden file on the drive somewhere that tracks your 30 day usage from there. If it does exist, then using the Remove Office tool is the only way to get it off the hard drive so you can install the full version.

Cannot install creative cloud on new iMac 5k

cannot install creative cloud on my new iMac 5k. i get the message: you need creative cloud to solve this problem... well it will not install

Please check if these could help :
Install, update, or uninstall apps
Troubleshoot Creative Cloud download and install issues
creative cloud desktop failed to install
In case the issue is still not resolved, please contact Adobe support at
http://adobe.ly/yxj0t6
Regards
Rajshree

Satellite A30 - Not able to install Power Saver on Windows XP Professional

Hello, i need help, i had to install win xp prof on my a30 but i cant install the power saver tool which i downloaded from this page. the tool is telling me "You can not install this version of Power Saver on your System", but its the lastest version for windows xp regarding this toshiba page. is the power saver tool only for windows xp home ?

Hi
No, the Powers saver should also works and run with Win XP Pro.
There is no difference. Every tool which works on XP Home is compatible with Win XP Pro too.
Did you receive the Tools and Utility CD? You could try to use this version

POWER SAVE ON NEW HUB 3

Hi. I always used to switch off my hub at the wall socket every night but have been advised by a BT engineer this is not a good thing and to leave it on 24 seven. This seems to have solved some of my problems. However,, I now have a new Home Hub 3 with this power save facility, if I switch off my hub at the button on the Hub will this have the same affect as switch it off at the wall.

I know all this sort of stuff is very confusing at times
The hub3 is currently the best type regarding electricity consumption as it uses less than the previous hubs.
If you turn off all devices connected to the hub, the hub will automatically go in to power save mode, thus using even less than what it does when it's running with devices connected.
Ideally you should leave the hub connected 24/7, but you should be able to turn it off once every 24 hours without any problems. It's if you switch it on and off multiple times that you will run in to problems.
The link I gave you above will tell you all about the auto power save mode - you do nothing except turn off all the devices connected to it or how to set a manual power save mode - you set this via the hub manager - type bthomehub.home in to your browser
-+-No longer a forum member-+-

Cannot install Adobe Air on new MacBook Pro - Help!

I have a brand new MacBook Pro and I am trying to install a program from Real Networks called Rinse (cleans up your iTunes). When installing Rinse, I get a message that says the program requires Adobe Air and that I will need to download and install it. I have downloaded the Adobe Air install program from the Adobe site, however when I go to install it, it either does nothing at all---or it gives me an error message that I need Adobe Air in order to install Adobe Air (makes no sense). Specifically, I get the message below:
This application requires a version of Adobe AIR which cannot be found.
Please download the latest version of the runtime from
http://www.adobe.com/go/getair,
or contact the application author for an updated version.
Any help or suggestions would be greatly appreciated. Thanks!

Hi,
I would recommend you try downloading Adobe Air from this link : Get Adobe Air.
You will have to manually select the operating system and version before you begin the download.
If you continue to have the same issue, I would recommend that you post it in the Adobe Air Forums.
Thanks

Cannot install 10.6 to new hdd

My hdd was on the way out so ordered a new Hitachi 1TB - it arrived this morning and installed easily. However, also ordered a new 10.6 Snow Leopard CD from apple store in hope to boot machine from it and make fresh install to new HDD. Booting machine, holding c and it buzzes and whirs for a bit and then ejects the CD. I then get a flashing folder icon with a '?' in it. I do not have my original 10.5.5 Leopard discs as they on way to me in shipping from old house. If its my CD drive that is playing up - is there another way to get my new CD of 10.6 onto my new blank hdd that is installed in my machine?? I have also tried to boot from a friends Tiger install disc - it does the same.

Hi Guys, these are great tips etc - thank you, but I think we're missing the main point, that being that I cannot boot my iMac from the SL installation CD - I get nothing holding down C or 'Option' etc - it just ejects it, so I think I may have a problem with the CDROM. My only other machine is my Macbook Pro, running Tiger.
Q: is it possible to boot my iMac with BLANK HDD from any other device USB/FW connected??? You see, the HDD has NO OS on it and the CDROM is not working either. Could I boot the iMac using the SL installation CD in a USB connected CDROM drive???
Last resort I guess is to take it all to bits again, get SL on the new HDD by some other method and put it back in again.
Any thoughts??

Cannot install apps in the new iPad.

After activating the new iPad and setting up some apps, the issues occur like that when you purchase apps from AppStore and install them, they will always keep in waiting status. But I have checked that the network is OK and restarted the new iPad already. Anyone can assist me to sovle this problem?
Thanks.

Try any or all of these and see if they help.
Check to see if you have a stalled download in iTunes - a song that did not finish downloading or a podcast perhaps. Finish those first if there is one in there.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.
Tap on one of the "waiting" icons and see if you can get one of them to pause - then tap again to see if they will resume downloading.

Cannot Install any OS on new system - Blue Screens whenever I tyr

Hello mon Compadres,
I have recently bought a new KT4AV mobo, an AthlonXP 2600+ and 512MB of 333mhz DDR memory to go in it, to upgrade my computer. I took this oppertunity to re-install my installation of WIndows XP Pro, and so reformatted my Harddrive and then popped all the new stuff in my case. I now find that I cannot get Windows to install on the Harddrive again.
The system will POST fine, it recognises the memory and the CPU speeds properly, and all the drive seems fine. It will enter the XP install program from the CD and the partitiion and format the drive fine. But then, invariably, at some stage in the install it will blue screen and force me to reset the computer. The error message most often come during the "Copying Installation Files" section, but very rarely waits until the next section of the installation - after the setup program has reset the comp so as to boot from the harddrive instead of CD - and then gives a similar blue screen error.
The error is 9 times out of 10 of the type "IRQL LESS THAN OR EQUAL" which means nothing to me. I have all the IRQ set to auto in the bios. Sometime it is a different message but on these occasions never the same one twice. I have tryed almost every BIOS setting there is (except the frequency + voltage which I don't want to risk). I have also tried to change every combination of hardware, IDE cables, jumper settings, and have tried a different CD-ROM in the system.
I have also tried to get Linux on the system too (Mandrake 9.2) but that gets about 3 minutes into the install and then locks up with a black screen forcing me to hit the reset button.
Thanks fro reading this utterly long post. If anybody has any advice on how to fix this problem I will be forever in your debt.
My Thanks.

Curiously, the problem seems to have subsided now I have unplugged the Floppy Disc drive. I can't imagine why the Floppy Disc drive would cause such errors but there you go.
Even more curiously, the system works fine now exept for when I put a strain on the harddrive it cause the computer to restart. It has happen a few times now, a few times when I was copying data from one HD to another, and another time when I was doing a virus scan of my computer.
I have turned to automatic rebooting on system errors (from the System Control Panel) off, so will post any blue screen messages if I get any more.
Thanks for the advice about PSUs too guys. I shall probably get a beefier one when I get my next paycheck.

Cannot install Xcode4 on very new MacBook Pro with Lion 10.7.2

Hello,
I am trying to install Oracle DB 10g on my brand new Mac OS X 10.7.2 Lion Mac Book Pro.
One of the Oracle requirements is to have either the:
A) Dec 2003 gccLongBranchTools update installed; or
B) install XCode Tools 1.2 or higher, which includes the correct version of gcc
Well, when I try to install XCode 4 with Mac OS X and iOS SDK's I got 2 errors:
1. an error regarding permissions on sudoers which appears to have been fixed by running Disk Utility - Repair Permissions - at least it's not appearing in the install.log file at this time
2. and the other which is more of a mystery to me, it reads
PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “iPhoneSDK5_0.pkg”." UserInfo=0x7fdf8a4d2190 {NSLocalizedDescription=An error occurred while extracting files from the package “iPhoneSDK5_0.pkg”., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, NSURL=file://localhost/Applications/Install%20Xcode.app/Contents/Resources/Pack ages/iPhoneSDK5_0.pkg, PKInstallPackageIdentifier=com.apple.pkg.iPhoneSDK5_0, NSUnderlyingError=0x7fdf882e8d40 "The file couldn’t be opened because it isn’t in the correct format."} {
I have no idea how to deal with this error or why it would be so. Needless to say, it stops the entire install. I downloaded the latest version of XCode just this morning.
I also thought of trying to install GCC by itself but the info on their site seems to be dated back to Darwin and not sure if the version they have there is applicable to Lion, plus I haven't done "MAKE" or any of the build type process since college. Would like to avoid this approach if possible.
Can anyone offer any solutions. I need to get going on Oracle review!
Regards,
Gerald

KT,
Should have said - 4.2.1 is the version. I did another download while I was waiting for replies on this thread and am going to give it another shot.
Not running anti-virus yet - brand newmachine so haven't installed everything. 400gb free, hard drive passes any checks I've run on it. I haven't looked outside to see the moon yet so not sure of that last one.
Why would I want to create a new user to run the freshly downloaded installer??
mallethead

Cannot install power saver on new OS

Similar Messages

Maybe you are looking for