Cannot install recovery image on my Equium after HDD upgrade

Hi
I just installed a new hard drive to my Toshiba Equium laptop I contacted Toshiba who informed me I could fit up to 1TB I opted for half way with a 500GB.
After installing the drive I inserted recovery disk after a while it had loaded with the message operation completed successfully. Next message windows set up could not configure windows to run on this computers hard ware. Then windows could not complete the installation to install windows on this computer restart the installation...
At the end of the recovery process a message tells me to remove recovery disk and exit as soon as I exit laptop shuts down and doesnt re boot automatically. When restarted next message windows Vista is starting for the first time then the cycle starts again. I have tried to reload recovery several times as instructed but no good.
Any help much appreciated

I dont know which notebook model do you have but if recovery image is Vista it must be pretty old model, maybe Equium A200.
To be honest I didn't make experiments with HDD upgrade on older models but I can imagine recovery image make a problems with HDDs with huge capacity.
Post please model name and which HDD have you inside now.
By the way: if possible try to install Win7 using Microsoft installation disc. Im sure it will works without any problem.

Similar Messages

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

New user prompt when installing recovery image

I'm deploying an Oobe image of Windows 7 home prem. and also a recovery partition with the same Oobe image.
When re-installing windows from the recovery partition (starting the recovery from windows) i get promtped to input a name for a new user. This does not happen when applying the image manually from WinPE.
I know this is not much infomation, but I am not sure what infomations is needed så please ask and I will add it to this post.

If your image has a staged answer file from sysprep from prior to capture, the reason would be because setup.exe ignores it. In order to get Setup.exe to install an image using an answer file, you'll need to customize windowsRE. See the following link:
http://technet.microsoft.com/en-us/library/dd744576%28WS.10%29.aspx
You can add your custom tool to run setup.exe with the /unattend switch.

How to install recovery image on my Satellite L655-121?

I Have a SATELLITE L655-121 Toshiba's labtop ,,,
I've made a Recovery to get rid of the problems i faced in Windows 8 beta ,, but the recovery didn't completed :(
Now i can't either repair or remake the recovery !! I've stuck !
I can't use the HDD Recovery that presents on ' D ' Driver !! and i don't have the CD on which the copy is present ,, i just have the Serial Number :D
The Widows is " 7 Home Premium OA "
The laptop is useless now ,, what should i do ? if i downloaded this Windows from Microsoft and used the S.N I have , should this work correctly ??

>... but the recovery didn't completed
How to understand this?
> if i downloaded this Windows from Microsoft and used the S.N I have , should this work correctly ??
No. serial number has nothing to do with recovery image.
If you want to have original Toshiba recovery image installed on your notebook you must order Toshiba recovery disc - https://backupmedia.toshiba.eu/landing.aspx
Other option is to install own OS version and later install all necessary drivers, tools and utilities additionally. All of them you can find and download from Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Canot install recovery image on Satellite L775-140

Hi everyone,
I have a Satellite L775-140. I decided to restore my notebook to factory settings so Ive created 4 CDs using preinstalled Toshiba recovery disc creator tool.
However, when I put the first CD, after a few minutes, there was a error:
diskpart successfully formatted the volume.
copy files recovery bases
htmprep ...
boot ...
establishment file error - data error (cyclic redundancy check)
error: copying of files based recovery failed!
press any key to continue. . .
What to do? Knowing that I have these recovery CDs, is there a way around how to install it?
Could anyone help me? Generally speaking I have several problems but I have not found an answer or find the same situation as me.
Thank you for your help
Message was edited: posting has been translated

Hi
> error: copying of files based recovery failed!
The problem seems to appear while copying the files from disk to HDD.
I think Dr. Lamp might be right: either its a problem with the recovery cd or HDD.
Solution proposal:
You have to find out the troublemaker. In your case I would recommend you to boot from another disk (Microsoft Windows disk or maybe Linux) just to check if the HDD is OK.
You can also check the HDD using the Open Source software called Gparted.
http://gparted.org/liveusb.php
Create USB live CD and boot the notebook. This tool allows you to check the HDD and to manage the partitions.
In case the HDD is OK, the created recovery disk could be faulty and this would require new recovery disks. If you cannot create the disk again, there is an website where you could order such medium from Arvato http://backupmedia.toshiba.eu/landing.aspx

Cannot install Office 2013 during task seqeunce after installing R2

Hi,
Since we installed SCCM 2012 R2, I have not been able to install Office in my baseline captures using a task sequence (64-bit OS). Ronni Pederson suggested using an Application rather than a Package but in his example, the application is being pushed rather
than deployed during OSD. Either way, his solution doesn't work for me. Office 2013 does install on my Windows 7 SP1 32-bit capture without any errors (same package).
I saw another suggestion that recommended using a wrapper script in a package. When I tried this, I used Task Manager to verify that application was installing and I could see msiexec running. After about 10 minutes, SCCM seems to be waiting for feedback
from the application which never happens. The task sequence fails and I can see log messages stating that it's Waiting for job status. It repeats this message for about 20 minutes and then fails. The wrapper script seems to have the best results but still
doesn't install Office without errors. When I logged in as administrator, I could see that Office looks to be installed. I tried launching a few of the apps and they are working so I don't really understand why this installation doesn't work properly.
Prior to installing R2 on SCCM 2012, this was not a problem. I installed Office 2013 via my capture task sequences many times without any problems. The only thing I can find through research is to use an Application object or use a Package object with a
wrapper script. I couldn't find any other suggestions.
Does anybody have any other ideas?
Thanks,
Rob

Before I can name any ideas, I need to know what's going wrong. Did you follow all the log files? I would start by looking at the installation log files of Office (%windir%\Temp) and see if it's indeed ending successful. If it does then continue to the
ConfigMgr log files (App*.log for application, or exempt.log for package).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to install recovery image on Satellite 5200 using USB DVD drive

Hello,
I have this problem with a Satellite 5200-902 that has the DVD-ROM corrupt and I don't find the part to change. (model DVD: uj-810b)
But I would like to reinstall the notebook with the CD recovery and I don't be able to enter in the BIOS for change the boot order and start with a USB DVD-ROM.
I removed the HDD and reinstall the WXp Prof by another machine but when I restart the 5200 I read this message " errore nel caricamento del sistema operativo".
When turn on I press F2-F10-F12 but if I select another peripheral for boot the notebook start only by network.
Can you help me to recover this notebook by an external USB DVD-ROM?
Thanks
Andrea

I have an usb floppy drive model ibm TEAC FD05pub, I think it's incompatible or the notebook don't has the power in the usb port because the led of the floppy is of.
When I tried to press ESC + F1 in the bios I set only the date and the password but no the boot order and other function.
I really do not know what to do and how to solve.
I can not execute any BIOS update I can only do so because the boot from network or DVD-ROM (unfortunately broken).
I installed the operating system by connecting the hard disk on another machine but when I go to connect to my notebook S5200 gives me error.
Andrea

Cannot install DM 6 on win 7 after upgrading from vista

Hi,
until last month I was using DT 5.0.1 installed on Windows Vista and I was able to correctly backup my BB 8250 and to synchronize my Outlook contacts with the device.
After I installed Windows 7 (with an upgrade not a scratch install), I also upgraded DM to 6.0, but the install procedure stopped after copying several parts of the new packagge saying my PC is running an unsupported OS (it's Windows 7 Home Premium) and to install Windows XP SP2.
Obviously I tried to disinstall the DM 6 package and reinstall it again several times, but nothing changed.
Now the DM 6 is partially installed and doesn't work, same thing happens with DM 5.0.1 which is still installed but no longer able to connect to Outlook.
Can you suggest something on how to sort this out?
Best regards,
Giovanni

Hi,
sorted out by myself.
Don't know if the key action before installing DM 6.0 was disinstalling also DM 5.0.1 (which previously I left) or choosing italian language for the DM 6.0 aligned with the country (even if I hate Italian for IT matters...), but now it works.
Thanks everybody
Giovanni

Cannot install WinXP on Satellite Pro A200 - No HDD

Hi,
Please can someone help me. I've just brought 52 Satellite Pro A200 laptops. They come with Vista pre-installed, but I want to wipe them and install Windows XP. However I have a big problem - when I put my XP CD in and boot from it and click Enter to continue, it tells me that the Installation cannot continue as Windows found no hard drives (although I can boot in Vista so I know the HDD are ok).
Thanks for looking,
Matt Courtman
Cromwell Community College, UK

I too had the HDD problem. Its because there are no drivers on the XP CD for SATA hard drives. What you have to do is use some free software called NLite and merge the SATA drivers with the files off the XP CD. (It really is ace). Available at
http://www.softpedia.com/get/System/OS-Enhancements/nLite.shtml
Read this page it tells you exactly how to do it.(
http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml). If I can manage it then anyone can. Using the NLite software you copy the contents of your XP CD to your hard drive. Then you download the SATA drivers (available from the tosh site), then you integrate the drivers with your XP CD files. Finally you create an ISO image and burn it to CD. When you then boot off your new CD and install XP, it detects the SATA drive. Hey Presto!!!

Cannot burn encrypted disk w/disk utility after Yosemite upgrade

I upgraded to Yosemite and now I cannot create an encrypted disk with disk utility. I have a disk loaded with a project I recently completed with Final Cut X and I need to make an encrypted .cdr file for the purposes of making write protected copies for my client. I have always been able to do this by selecting the volume in Disk Utility, clicking New Image, and selecting DVD/CD master for the image format and then my encryption level (usually 128-bit) ALWAYS WORKS but not since upgrading to Yosemite. Now every time (after restarts, etc.) I'm getting first a dialogue box telling me it's starting to create the .cdr then quickly an error box that says: Unable to create "<disk name>.cdr" (Inappropriate ioctl for device) HELP!!! Need to get these disks burned and out to clients ASAP!!!

Are you trying to save the file to the desktop? I read elsewhere that Yosemite doesn't like that permissions wise. I was able to successfully create a .cdr by changing the file location to Documents.

Cannot install cs 5.5 design premium creative suite upgrade

It took many many hours and attempts to download the software-I was very unhappy about that and not it will not install. I have the student/teacher version. I restarted and still get this error message and I canont install the upgrade. If this cannot be upgraded from cs 5.0 to cs 5.5, , I would like a refund please.
There currently are no phone oeprators available for service, but there was always one for sales. This is very upsetting.
Thank you,
Elaine Reiter
[email protected]
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 7 warning(s)
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {0175676F-8C92-49F2-9131-D0D6AD654B41} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {66173EC7-974E-4652-9468-4A93D2481BF0} CSXS Story Extension 1.0.0.0 is already installed and the session payload {3450d4c5-a82b-4428-a512-842ee1555a14} CSXS Story Extension 2.5.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {78A53622-CDBA-49D1-A3D0-D563FB398D0C} AdobeColorCommonSetRGB 3.0.0.0 is already installed and the session payload {45063C56-A2A2-4FD1-A56A-A964723EEE1E} AdobeColorCommonSetRGB 3.1.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {39CB2E53-5326-4939-8B5A-0402C6EFBFE3} AdobeColorCommonSetCMYK 3.0.0.0 is already installed and the session payload {54D89F03-8EED-4FF9-BCDF-3B2E11D448A6} AdobeColorCommonSetCMYK 3.1.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {F8918124-1CFB-4AB9-9BC2-39B961DBBBEE} Pixel Bender Toolkit 2.0.0.0 is already installed and the session payload {9FBC5BF9-5019-49D6-A1B3-6BB0E2A1FA54} Pixel Bender Toolkit 2.6.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {925ED7E4-E1B6-4544-8141-1C98A18D2E2E} AdobeOutputModule 3.0.0.0 is already installed and the session payload {AC003BC0-704F-4F02-A72E-AC8B7044DE24} AdobeOutputModule 3.1.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
ERROR: DW013: Unable to locate volume for path. Please verify that path /Applications/Adobe/Adobe Widget Browser is a valid path. Please ensure that if any intermediate directories exist, they are valid directories and not files/symlinks

Elaine, you can start with this document, which addresses the exit code 7 error:
http://kb2.adobe.com/cps/843/cpsid_84332.html
You can also try our installation chat support at http://adobe.ly/yxj0t6. I'm not sure what country you're located in, but you can also get phone numbers for support here: http://www.adobe.com/support/contact/
If you're outside of the US, select a different country from the menu on the top left.

Install Yosemite before or after HDD Upgrade

My MBP (Model A1229) is the earliest that will run Yosemite. I had Yosemite running but found my overall Internet experience just too slow. Even after downgrading to Mavericks I wasn't content with the snap of my machine. On further notice, I found everything was dog slow, finder, opening apps, etc. I did all the optimizing at my disposal, primarily repairing permissions, hard drive repair and running Disk Warrior, but even so things are just sluggish. I found my Install Disks and ran AHT and had a few errors, among them was one for the hard drive. This is the original hard drive that came with this machine so must be getting real tire. I've noticed the hard drive is constantly 'ratcheting', sometimes for minutes - wondering if this is a sign of an ailing hard drive.
So, I intend to replace the drive which I have on constant Time Machine back up and wonder now if I should drop Yosemite on before I upgrade the drive, or wait and install fresh on the new drive?
Would it make any difference? Any thoughts?

The things that I would suggest that might work is to make sure that you have the updated version of Yosemite. When this was posted you said you have OS X Yosemite 10.10.... The version I have is 10.10.2 so there might be an update. Also you could call apple at 1-800MYAPPLE if you have purchased the applecare protection plan. Also you might wanna take it into the apple store near you.
Hope this helps!
~Thomas8902

Cannot import photos from iphone to iphoto after ios6 upgrade

I upgraded to IOS6 a few days ago. Now iphoto does not start up automatically when I attach my phone. When I open the app, my phone is not recognized and the "import photos" button is no where to be found.
I've tried checking off photostream, unchecking photostream; changing the preferences to image capture; rebooting my phone. I really need to get these photos off of my phone as it is full. Please help!!!
Thanks!

Yes, I did solved the problem. It was not with iPhoto but with the iTunes. Once I delete my phone profile all worked. I did not write the steps down but if you do it please post it here.
Cheers

HT4623 Why I cannot use the new feature of phone after I upgraded to ios 6???

I have already upgraded to iOS 6, but why I still cannot use the new feature of phone??
I cannot reject calls by sending them message. What happen??

While ios 6 is compatable with the iPhone 4, many of its features are not available for the 4. The features need the 4s or 5. See here:
Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
Siri is available in Beta only on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Siri may not be available in all languages or in all areas, and features may vary by area. Cellular data charges may apply.
FaceTime video calling requires a FaceTime-enabled device for the caller and recipient and a Wi-Fi connection. FaceTime over a cellular network requires iPhone 4S, iPhone 5, or iPad (3rd generation) with cellular data capability. Availability over a cellular network depends on carrier policies; data charges may apply.
Offline Reading List is available on iPhone 4 or later, iPad 2 or later, and iPod touch (5th generation).
Made for iPhone hearing aids require iPhone 4S or iPhone 5.
Panorama is available on iPhone 4S, iPhone 5, and iPod touch (5th generation).
Find My iPhone and Find My Friends enable you to locate iOS devices only when they are on and connected to a registered Wi-Fi network or have an active data plan.

Why can't I install apps on my iPad 2 after I upgraded it into iOS 6?

I pressed the install button and then it was stuck in the state having an empty bar waiting to be filled. Nothing happens. Does anyone know what's wrong?

Try a reset:
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
Note: You may need to do the above a few times

Cannot install recovery image on my Equium after HDD upgrade

Similar Messages

Maybe you are looking for