Cannot install Server 2012 using USB bootable flash.

Hello,
We plan to upgrade Server 2003 to Server 2012. I downloaded Windows Server 2012 R2 ISO file from the below link.
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012
Then make this ISO file on bootable USB flash and boot it on computer.
During Windows Setup installation after select partition,
Getting files ready on installation (xx%)
It displayed message that The installation was canceled.
"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"
I have tried the following ways.
- re-downloaded the ISO file again
- Installed on VHD
- Installed on different computer
- Tried choosing Server Core Installation or Server with a GUI
Still got the same error. Plese help me how to solve?

I'm not clear about your problem statement.  Are you saying that after downloading re-downloading the ISO, the installation failed in all three different installations?
If so, it really does sound like bad media.  There have been other instances in this forum where the person downloading was apparently hitting a server on the internet that had a bad copy of the media.  They got around the problem by downloading
from a different location, for example, a different part of town that gets routed to a different download server.
. : | : . : | : . tim

Similar Messages

  • Cannot install Server 2012 Evaluation

    Hi folks,
    I have an HP Proliant microserver on which I am attempting to install Windows Server 2012 180-day Evaluation in order to start learning.
    Have downloaded ISO and burnt to DVD but when I start the install an choose the Windows Server 2012 Standard install option I get a message:
    'Windows cannot find the Microsoft Software Licence Terms. Make sure the installation sources are valid and restart the installation.'
    Cannot get past this message so cannot install - I have downloaded the ISO multiple times and still get the same message.
    HP Microserver has 12GB RAM and 750GB HDD.
    Any help for a noob please folks?
    Thanks,
    Sq...

    Maybe this one helps.
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03928315-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1402536579859.876444892.492883150
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Cannot Install Server 2012 on RD430.

    When are we going to get the BIOS updates we need so that we can install the latest products that are already released?

    Just to document this in case someone runs across this old thread, all current BIOS versions available for this server support Server 2012.  The first version to do this was 2.04

  • Cannot install windows 8 using usb stick on G400s FreeDOS version

    I'm having some difficulties to get windows 8 installed on this laptop. is there any secrets or tricks on BIOS that I'm not aware of?? I have installed windows 8 on many laptops using same pendrive without having trouble previously.
    I have tried legacy mode and UEFI mode/boot without any luck

    hi wayne07,
    Thanks for using Lenovo Community Forums!
    Inside BIOS
        Under Boot Tab
              Change Boot mode to Legacy
               USB Boot should be enabled
        Under Security
              Secure Boot Has to Be disabled
    In case the options above are grayed out in your BIOS, Got to Exit Tab and Change OS Optimized Default to Other OS
    and check the options again.
    Once All are Set Make sure to save all changed by hitting F10 and enter for Yes
        After Hitting enter It will Restart and You have to keep on tapping F12
           this should pull up the Boot Menu letting you select where to boot. You should have now your USB Stick as an Option.
    Let me know your findings
    Best Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

    I have an intel based mac with 10.6.8 mac os x. How to install windows 7 using usb as the bootcamp doesnot have the option of creating a bootable usb. please help

    Welcome to Apple Support Communities
    You can install Windows from a USB drive in one of these computers:
    - MacBook Pro with Retina display.
    - Mac mini (Mid 2010 and newer).
    - MacBook Air.
    - iMac (Late 2012).
    If you don't have any of these Macs, you can't install Windows through a USB drive. Instead, buy Windows on a DVD. Follow Apple's steps > http://support.apple.com/MANUALS/1000/MA1519/en_US/Boot_Camp_Install-Setup_10.6. pdf

  • Install Windows server 2012 using powershell

    Hi Folks,
    How to Install Windows server 2012 using powershell.
    Thanks,

    Hi,
    According to your post, my understanding is that you want to install Windows server 2012 via PowerShell.
    Per the previous thread, we could not install Windows server 2012 directly via PowerShell.
    https://social.technet.microsoft.com/Forums/en-US/53f82989-4b9c-4197-9ff1-03e96c852eb7/how-to-install-windows-server-2012-directly-in-vhd-file-using-powershell?forum=winserver8setup
    As this is the forum for SharePoint server on-premise, I’m not familiar with the Windows server, for this issue, I recommend you can post a new question in the forum for Windows server.
    https://social.technet.microsoft.com/Forums/en-US/home?forum=winserver8setup
    More experts will assist you, then you will get more information relation to Windows server.
    Thank you for your understanding and support.
    More reference:
    http://vegibit.com/install-and-configure-windows-server-2012-with-windows-powershell/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Not able to install server 2012 R2 on a VMware Workstation 10 .

    Dear Team,
    Thanks in advance. 
    I am facing an issue when installing server 2012 R2 on a VMware Workstation 10 .
    This is the error message i get ''windows cannot find the microsoft software license terms. make sure the installation sources are valid and restart the installation.'' 
    i have tried changing the initial install option of OS  to ''other''. But still its the same.
    Finally i have installed it without adding the OS disk in the initial setup. But the problem here is that its asking me activation key. 
    if you have the activation key for 180 days please let me know.

    I have the same problem here.
    With VMWare Workstation 10, downloading and using the Windows 2012 R2 ISO evaluation to test.
    Shortly after booting up with the ISO, it complains about this message:  ''windows cannot find the microsoft software
    license terms. make sure the installation sources are valid and restart the installation.''
    BUT, if you uninstall VMWare Workstation 10 and install VMWare Workstation 9, no problem.
    Something wrong with either VMWare Workstation 10 or Windows 2012 R2.

  • I erased my HD. Now I can't instal mountain lion from my bootable flash drive, and keep getting "installation error. Try again."

    I bought  mountain lion, made a bootable flash drive.
    I booted from it and it went to upgrading right away!
    So I stopped it and went to my former recovery partition I erased my HD because I wanted a clean start.
    Now I can't instal mountain lion from the bootable flash drive, and keep getting "installation error. Try again."
    and there is no 4 choices window.
    I don't know what to do.

    How did you create the USB install thumb drive? If it was with Disk Utility I have run into this problem and have since used THIS program to make the USB install drive.
    As to your problem you only have one option and that is to Reinstall the Original OS X version that came on your computer or if you still have the Lion Recovery Partition use that to reinstall Lion. Or if you system came with Lion and you have No Lion Recovery HD Partition you can boot the system from over the internet and Reinstall Lion.
    At startup hold down the Command+Option+r keys until you saa a spinning Globe in the center of the screen. Once that loads Repartition the drive as One partition and then reinstall Lion.

  • Cannot Promote Server 2012 R2 Server to DC??

    I have a freshly installed Server 2012 R2 Core Edition with all of the latest updates as of today.  I did the following:
    - Changed name to DC6
    - Joined it to the existing domain.
    - Logged in as domain admin.
    - Set fixed IP address & set DNS servers to other DNS servers already on the network.
    I then installed the AD DC via Server Manager from my computer and that went through fine.  I then logged into the server itself and ran the following command:
    Install-ADDSDomainController via powershell and answer the commands as requested for the current domain and safe mode administrator password.  I get the following error:
    Verification of prerequisites for Active Directory preparation failed.  The specified user does not have SESecurityPrivilegeEnabled.
    I ensured that domain admins (I'm logged in as a domain admin) are in the local admin group and that hasn't helped.  NOTE:  I haven't had any problems adding domain controllers in the past, only with this Server 2012 R2 version.  I'm currently
    running Server 2008 R2 DC's at the 2008 forest level.
    Anybody have any ideas?

    I concur with GSS1 and Mike about the schema and that the account should in the Manage auditing and Security log policy. In addition, you may also want to see what the poster did in the following thread:
    Cannot promote server to DC:http://social.technet.microsoft.com/Forums/windowsserver/en-US/d456baf5-3037-4e61-8dc8-a78b005bd4ad/cannot-promote-server-to-dc?forum=winserverDS
    Ace Fekay
    MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
    This post is provided AS-IS with no warranties or guarantees and confers no rights.

  • Install Server 2012 on a raid device

    Hi there
    i have following problem - i have to install server 2012 (unattended) on an server with an LSI Controller.
    Therefore i have to configure the raid controller - befor the installation of the operating system.
    So my idea was to write an batch for configuration an execute this batch as a synchronous command. this is almost working but the configuration of the raid happens to late, so that setup cannont continue
    now i have two questions:
    is it possible to set an global environment variable as soon as possible?
    would it work if i start my configuration script in the startnet.cmd inside the pe-part of the boot.wim?
    any other ideas?
    thx
    netlord

    Hi Henrik
    i tried this:
    i´ve injected the storcli.exe and the raid.cmd into the first index of the boot.wim (called "Windows PE (x64)"
    also i edited the startnet.cmd and inserted following line
    %SYSTEMROOT%\storcli\raid.cmd (before of the wpeinit)
    this doesn´t work.
    unfortunaltely i can see no log of this action
    so i have some more questions:
    -was it correct to start my batch before wpeinit? (logically yes, but....)
    - where exactly is the switch between PE-part and Windows Setup-part?
    - can i stop the boot procedure at this time?
    - is it possible to write a log-file which i can read later? where to place it?
    - most of all i would love to write the log to my usb-boot device - is this possible?
    how can i set an environment variable which points to the usb-device?

  • Installing WIM file using USB

    Hi,
    I want to install captured image using USB. Not sure where I went wrong. here is what I did.
    I captured an image(windows 8.1 x64 ) using MDT . I have used the captured image in WDS it works fine. But I wanted to use USB (as the file size is 6GB cant use DVD) to install on remote machines. 
    Than I converted it to ISO. I followed a step in http://www.ehow.com/how_5750929_convert-wim-file-iso-file.html 
    Finally I created bootable USB using Rufus (also tried ultraiso). easy ah
    But when I boot from the USB  it is giving me "windows failed to start"error as if there is no windows file on the USB.
    Can anyone please help me.
    Thank you very much
    Serki

    You can use the wim you captured, and create a new task sequence in MDT. You should then be able to create media to a folder, and copy the files to a USB drive. Once booted, the process should be similar to the WDS process you have used, assuming you used
    a MDT task sequence for the WDS deployment.
    Here is a walkthrough for Windows 8.1.
    https://technet.microsoft.com/en-us/windows/dn481547.aspx

  • After BIOS Update cannot boot Satellite C640 using USB Stick

    After upgrading my Toshiba Satellite C640-10E (PSC02E) bios to 2.00 WIN, I cannot boot the laptop using USB Stick, When I checked the BIOS using F2 I was stunned because the USB connected to laptop was labeled as FLOPPY drive. Is there any option to downgrade the BIOS?
    Thanks

    From my experience the BIOS is able to boot from
    - USB FDD (floppy disk)
    - Primary HDD,
    - USB Memory stick
    - Network (LAN)
    So I dont think that your USB memory is recognized as a USB FDD but the USB FDD appears as a separate boot device.
    It would be interesting to know if another USB flash memory would act as your old USB flash stick.
    PS: as Tonny suggested: you cannot downgrade because you dont have previous BIOS version only Toshiba service agents are able to downgrade the BIOS using traditional BIOS.

  • My computer cannot install windows 7 using boot comp

    hi
          my computer macbook pro cannot install windows 7 using bootcomp

    You really have not given any details.
    Windows is easy to install, if you read and follow the instructions.

  • What licence do I need to install server 2012 R2 standard on a single i-7 cpu machine?

    What licence do I need to install server 2012 R2 standard on a single i-7 cpu (multi-core)  machine?
    Is a 2 processors licence OK?
    Thanks.

    Yes, you are all covered.

  • Cannot Install Photoshop 5LE using windows 7. What can I do ?

    Cannot Install Photoshop 5LE using windows 7. What can I do

    Nothing. It's simply not compatible. You need to upgrade to another product.
    Mylenium

Maybe you are looking for