Cannot install Snow Leopard on a new HD in MacBook

I have an older white MacBook that I want to install Snow Leopard onto again. I swapped the existing harddrive back to the original one I received from Apple when the MacBook was purchased. Before putting the hd into the MacBook I made sure to partition and format with Mac Journaled.
During startup I put the Snow Leopard disc and press C to boot from disc. Slowly but eventually, the Snow Leopard process begins. My MacBook cannot seem to detect the HD that is in the machine... When I run Disk Utility, it does not populate but the DVD drive with the Snow Leopard disc is found.
Any suggestions?

What you are saying boils down to the MacBook is not recognizing the HD now installed in it. (Regardless of the formatting, Disk Utility should at least list the drive if it is communicating with the MB's hardware.)
Open the MB & make sure the HD is installed correctly, if necessary by removing it & reseating it, making sure connectors are fully mated, nothing is interfering with its fit into the space for it, etc. Close everything up & restart it, listening for any sounds that indicate the HD is spinning up. If not, it may have been damaged. You can also run the Apple Hardware Test from your original grey system disc set (see the label of the disc for instructions about how to do that if necessary) & see if it detects any hardware problems. If so, make a note of the error code & report that.

Similar Messages

Install Snow Leopard over brand new Lion based MacBook Pro

Dear Forum.
This is actually a hardware question plz this is not a meant as a discussion whether Lion beats Snow Leopard etc.
Plenty of threads around communities tells how to install 10.6.8 over 10.7 But there is a warning sign!!! :
I have a brand new top-of-the-line MacBook Pro (shipped with 10.7.2) and for some reason it won´t even start from a 10.6.8 DVD
I was thinkin´ go scratch the 750 GB HDD at one of my other Macs, but for some reason I´m afraid that Apple now have bugged the HW so it won´t be able to install 10.6.8 no matter how sofisticated changes are made??
Anyone knows or have any experience??
With love from Denmark, Thanks everyone for reading this

so it won´t be able to install 10.6.8 no matter how sofisticated changes are made??
Read here > Don't install a version of Mac OS X earlier than what came with your Mac

Can I install Snow Leopard on a new partition on a Macbook Pro (Late 2011)?

I need to get Pro Tools 9 up and running again after I migrated from PC to Mac, but I know that Pro Tools 9 doesnt work with Lion.. I dont have the money to upgrade to PT10 so my thought was to go downgrade to Snow Leopard to get it working. But I dont want to leave Lion, so my question is if I can make a new partition and install Snow Leopard on the new partition and have both OSs bootable?
The guy in the store I bought my mac from said Snow Leopard probably wouldnt play nice with the mac since its adapted to Lion but I dont trust people that get money for preaching about the constant need for "the latest". So I thought I'd ask the experts instead, so here I am! What do you guys think?

theoretically, it should work - but the guy at the Apple Store is correct....computers that ship with the latest operating system do not support being downgraded.
You might not get past the spinning beach ball & gray screen if you try to boot from the Snow Leopard install disc.
It's worth a shot though if you want to try it. Just don't try to 'downgrade' the current Lion installation back to Snow Leopard. Try instead to create a new partition specifically for Snow Leopard. Disk Utility - select the top HD (probably reads Hitachi something)...select it, click on the Partition tab. Select the top partition, and you should then be able to see the + so you can add a new partition. I would probably make it about 20GB give or take depending on how much space you think you will need - but i believe the Snow Leopard installation by itself takes up around 8-10GB.
Once this partition is created, insert your Snow Leopard installation disc, restart the computer and hold the C key down to start from the install disc. When it walks you through the steps for installation, select the newly created Snow Leopard partition. Install. Be sure to go through all the Software Updates (numerous times) after the installation is done.
You can select which startup disc you want to boot from by holding the Option button down at startup until you see the gray startup manager that shows your Lion partition, Recovery Disc partiton, and your Snow Leopard partition.
If for whatever reason this doesn't work, simply just erase the partition. It likely will not work but you should be able to just erase that newly created partition without any other problems.

Can i install snow leopard on my new macbook pro

I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link). Units from pre-July and last year can be found, and come with warranties just like brand new.

MBP 17" mid 2010 Snow Leopard Native: why not possible to install Snow Leopard in some new Hard disk?It appears "impossibile 'cause you have Mac OS X" 23.1.1."

Guys, I want to install SL in some hard disk. It's the native OS, the one came with the MBP. But after having installed Lion, my MBP doesn't allow me to install from the original dvd of Snow Leopard, telling me "impossible because you have Mac OS X” 23.1.1. istaller".
Someone can help me?

hey thank you for your answers. I've written that I want to install snow leopard in a new hard disk, not over the lion. In other words, I want a hard disk with the faster snow leopard, that was the native OSX of my MBP mid 2010. But using the last procedure you suggested me, the dvd doesn't appear. I repeat, there's something changed in the firmware that blocks snow leopard.
the comunication that appears when I insert the original dvd of SL is something like "impossible to install snow leopard because you have Mac OS X” 23.1.1. istaller".

Can I install Snow Leopard in my new 2013 iMac???

Hello:
Can I install Snow Leopard in my new iMac (2013)?
Or will have problems with drivers of new iMac???
Maverick is a potato!!! 200 New features but 200 or 300 lost features too !!!
Thanks.
Joseba

Free updates to Pages and Numbers are available from the App Store. Sharing your iPhoto Library is another matter, discussed in iPhoto for Mac.

Cannot install snow leopard. Keep getting"os product manager domain error-100"

Cannot install snow leopard. Keep getting"os product manager domain error-100"

Just to double check,
1: you are hold c or option/alt key booted from the 10.6 disk that came with your machine
2: you are in Disk Utility and you have selected the drive makers name and disk size on the left
3: you attempt to click Partition tab, click on the big box, select 1 partition, select option: GUID and format OS X exteneded Journaled and it reports "can't unmount disk"
4: you do have no other drives connected to the machine
If that's all true, then you need to quit Disk Utility and use Terminal and try to force unmount the disk
http://macosx.com/forums/mac-os-x-system-mac-software/309784-official-mac-os-x-1 0-6-snow-leopard-thread-faq-33.html
Once the drive is unmounted, then hopefully you should be able to format it in Disk Utility

Trouble With installing Snow Leopard on my 4 year old Macbook

I'm trying to install Snow Leopard to my 4 year old Macbook stuck on 10.5.8, but it keeps saying "The application 'Install Mac OS X' cannot be used from this volume." I've tried almost everything to solve this, but I can't find anything at really helps my situation. I've looked on some of these discussions, and they haven't really helped much. My Macbook has a: 2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, and is stuck on OS X 10.5.8. Please give me your input and help

Are you using a Retail version of Snow Leopard that looks like this?
Or gray discs that look like this?
The gray discs are machine specific and will only work with the MacBooks that they were shipped with.

Installing Snow Leopard 10.6.3 on my MacBook

I installed Snow Leopard 10.6.3 on my MacBook using the installation disk, and followed the instructions. The software seemed to install, the computer rebooted, but when I checked info, it tells me I still have v10.5.8. How do I get v10.6.3 to install?

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
      update unless you will boot from this drive and install the update on it.
      Reconnect it and turn it back on after installation is complete and you've
      restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
E. If updating:
1. Download and install update(s)
2. Use Software Update, or
3. Download standalone updater(s).

I would like to install snow leopard instead of lion on latest macbook pro MD318 (oct.2011) Does anyone know if this is possible? If so, will I have to use install-disks of previous model (eg. MC721) or will retail-disks serve?

Experiencing serious problems with lion, I would like to install snow leopard instead of lion on latest macbook pro MD318 (oct.2011) Does anyone know if this is possible? If so, please tell me how. Will I have to use install-disks of previous model (eg. MC721) ? Or will retail-disks serve?
Thanks steph

Snow Leopard is currently running on this MBP 15", late 2011 model, due to my need to run an old version of FileMaker.
A retail disk with 10.6.3 did not work, I restored my previous Snow Leopard install with Disk Utility.
However, it is not the shipped software and is not officially supported on this Mac. Therefore, your advice to troubleshoot Lion is the best option.

Cannot install Snow Leopard, Icon just bounces and disappears

So so complicated to Use a Mac, absolutely the opposite of user friendly after coming from a PC: everything is hidden on Macs!
So I want to install Snow Leopard (I currently run Leopard - got the computer 2nd hand)
I have a new copy of Snow Leopard in a box with the leopard on the front.
The Adobe user guide opens fine from the disc itself so the disc works.
I double click on the install Mac os x with the blue arrow pointing down at the top.
IT bounces 3 or 4 times in the bar at the bottom. Then nothing else happens
Don't understand this. It won't even tell me what's going wrong.
Machine Model: Mac mini
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.42 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.9f1
Thanks for any help

You need a Intel machine

How do i install snow leopard on a new hard drive

My hard drive went bad on my macbook pro and had to install a new on. Can anyone help me install snow leopard? When i try it doesn't see the new HD.

I am hopeless! Try as I might I can never get my external hard drive to be my startup drive. In summary,
I have a brand new Western Digital blue caviar HD, which I formatted as 2 partitions, both extended journaled with GUID partition.
I tried 2 different ways to install SL onto one of the partitions. I tried to boot up the SL Install disk holding c key, but the internal HD prevailed as startup, with the Install disk showing up on the desktop. I chose INSTALL and specified on one of the partitiions of the external drive. i ended up with one folder called: MAC OS INSTALL DATA, but it would not boot up when I restarted the computer, holding the option key down. I next tried using System Preferences to select the partition as a startup BUT its icon did not appear so I couldn't choose it.
I decided to choose the Install Dvd as the startup (given that holding c key on booting would not work to boot the Install dvd). However, as above, when I went to select the partition as the disk for the SL install, its icon was again not visible.
However, both of the partition icons DO appear on my desktop when I reboot the computer using the internal HD as the startup. I can't see what I am doing wrong.

Why am I not able to install snow leopard on a new hard drive for my macbook pro, which at one point was upgraded to Lion?

I've just had my hard drive go caput and after purchasing a new one was inclined to install snow leopard but received an error message when attempting to do so.
I did not create a back up or restore file before I decided to upgrade from snow leopard.
I'm wondering why am I not able to simply install snow leopard on a brand new hard drive. What would clue it into me having had ran lion before and why can't I simply delete that kernel or said file. It makes completely no sense to me. I come from a pc world where if I choose to format a hard drive, I can do a clean install of whatever OS I choose. After all I only paid for my laptop as should be able to do with it what I wish.
Any suggestions or insight would be greatly appreciated

1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian

Cannot install Snow Leopard on Late 2006 iMac with 10.5.8

I tried already two times to update my iMac (currently on OS X Leopard 10.5.8) to Snow Leopard. The update process runs for about 20 minutes. The iMac restarts, and then there's a message that Snow Leopard cannot be installed. One shall contact the software's manufacturer. I checked in the Installer log file and it says something like it could not u(n)mount a volume.
There are 2 external hard drives connected to the iMac via FireWire (one for TimeMachine). Do I have to disconnect them before installing? There's also a TV tuner (DVB-S) from Terratec connected via USB and EyeTV (a version compatible to Snow Leopard) is installed. I already thought that it is maybe the EyeTV software (that came with the Terratec tuner) that prevents the installer from proceeding ...
As stated, I gave it two tries:
The first time I booted the iMac from an external hard drive with 10.5.8 installed on it, ran disk utility to check, repair permissions and verify the iMac's internal disk (--> everything was fine) and then inserted the Snow Leopard DVD and launched the installer.
The second time I booted the iMac from its internal hard disk (with 10.5.8) (=the disk on which I wanted to install Snow Leopard), inserted the DVD and launched the installer.
No success in both cases.
Any suggestions, help ??
Thanks a lot in advance!
Rainer

I think it will work if you restart from the Snow Leopard installation disc. Insert disc. Restart with the C key held down to force startup from the optical drive. You have already done a +Repair Disk+, which is a smart move before doing any system installation. So when Installer comes up, just proceed with the installation targeting your internal drive.

Cannot install Snow Leopard on late 2006 MacBook

I have been trying to perform an erase and reinstall of this machine for my daughter to use. The ram had been upgraded to 2GB, and my son had it partitioned to run Windows also. There was never any problem with the machine -- I just bought him a new MacBook Pro last year.
So - I have successfully performed the "erase" part - but Snow Leopard (from retail discs - that this machine had been upgraded to) will not complete installation. I have gotten as far as "28 minutes remaining" and then it hangs up - spinning beachball - etc.. I hear the drive start up, and then stop, over and over.
I booted from the disc and ran the Disk Utility - and it shows that the hard drive is working properly.
And of course Apple says that they do not support machines over 5 years old (something to that effect).
Any help anyone can provide is greatly appreciated!
Thanks in advance,
Kim

kiminfl wrote:
Ok - so I am back into Disk Utility (booted from disk and selected disk utility). There are 2 hard drive icons on the left hand side ' 60.01 GB Toshiba, and then below it (indented) "Untitled".
The 60GB Toshiba is your entire boot hard drive, the "Untitled" below it is a partition on that drive if it's indented or else it's the optical drive.
What you want to do is select the "60GB toshiba" and click Erase, then Security Option > Zero All Data and click Erase, this will map off any bad sectors that old drive might have. Will take some time so wait about a hour.
(Ideally it would be good to replace it with a newer/larger one)
Install/upgrade RAM or storage drive in Mac's
Once that is complete you head to Partition: Select 1 Option: GUID and Format: OS X Extended Journaled, give the drive a name and click "Apply"
Now your drive is formatted, quit Disk Uitlity and select the drive and install OS X 10.6.
Once it's completed reboot and setup, enter your wifi/network and get online and Apple menu Software update until clear.
The machine is ready to use.
How to erase and install Snow Leopard 10.6
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Cannot install Snow Leopard on a new HD in MacBook

Similar Messages

Maybe you are looking for