Cannot install standalone QT 7.0.3 (Error Code 1324)

Hey all,
After I tried to upgrade iTunes from 5 to 6 I got the same problem that many had: the installer would cycle endlessly on "Installing Quicktime," and with much effort I managed to quit installation, erase everything and install iTunes again.
iTunes installed after a few tries, but I got the -3 error at the very end of the QuickTime installation. So I followed advice and got the standalone QT installer, but when I try to install it, this is what it says:
"Error 1324. The path ??????? contains an invalid character."
(The filepath is actually displayed as 7 question marks even though I specified the default C:\Program Files\Quicktime directory.)
When I click OK, it gives me another message:
"Error: -1603 Fatal error during installation. Consult Windows Installer Help (Msi.chm)or MSDN for more information."
I've tried many, many different methods and I'm still stuck on this. One thing that might be messing the installation up is I am NOT using an English version of Windows XP; my system is in Chinese Traditional. (I did try selecting Chinese Traditional in the QT installer, but it didn't make any difference.)
I am completely out of ideas. If this persists, I'm going to have to use Winamp. Please help!

Okay, so I tried uninstalling everything and going back to iTunes 5. The installation program (iTunes AND Quicktime) runs without error, but when I try to start iTunes it gives me an Error #-2093 Quicktime failed to initialize.
Now I know of the solution which involves uninstalling both iTunes and QT in Safe Mode, and the one which involves using the Windows Install Clean Up on both of them, but QT DOES NOT SHOW UP in either Add/Remove Programs (although iTunes does) or Windows Install Clean Up! What in the world is going on here?
Bewildered,
W

Similar Messages

  • Cannot install new Lightroom.  Keep getting error code 58

    Cannot install new lightroom CC.  Keep getting message of error code 58.

    It's usually a better bet with a 2330, but I think we'd better check for disk/file damage on your C drive.
    The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Pc cannot install purchased photo elements 13.  Error message appears:  File archive part missing from Adobe Photo Elements 13.  You need all parts in the same folder in order to extract Adobe Photoshop 13.  please download all parts.

    Cannot install my download due to above error message.

    Hi revbos,
    Apologies for your incovinience.
    Requesting you to please go to https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us. When you click on download button (after selecting your OS details), it should open a new browser window (which will launch the Akamai installer automatically). Please cancel any installation or error shown.
    The newly opened browser page will look something like this:
    As highlighted, please click on these links (one by one) and see if it downloads the required files. The downloaded files will be compressed with 7z format. If you have some extracting tool (like WinZip) try extracting it. If you don't have it, download 7z. Its a free utility from Microsoft. Once downloaded and installed, you will be able to extract file and locate the PSE setup.
    Please let me know if you face any issues.
    ~Surendra

  • Safari cannot install profile due to an unknown error. I didn't install anything. Does anyone knows why I'm getting this error message?

    I was watching a clip in livel, suddenly I have seen a error message on my iPhone screen  safari cannot install profile due to an unknown error,
    Does anyone know why I have got this message?
    I didn't install and did not want to install anything!

    You can not download items from the internet with an ipad, you can download from the app store or from itunes or some cloud services (dropbox) but not from browsers, there is an Iphone app for we transfer in the app store that appears that it can be used on an ipad as well.
    You may want to take a look, its free

  • Cannot install oracle vpn on linux getting error kernel-sourcecode is neede

    cannot install oracle vpn on linux getting error kernel-sourcecode is needed by gds_cisco_vpn_client-2.0-llrhel4.i386.. i already installed kernel-devel still it get the same error. pls help.

    1. kernel (.rpm)
    2. kernel-devel (.rpm) - containing only Makefiles and some kernel header files
    3. kernel source rpm (src.rpm) - source for rebuilding the kernel
    4. kernel-sourcecode (.rpm) - source-tree for developing custom kernels
    are four different packages.
    If you are running OEL-4 (2.6.9 kernel) and you have an ULN account, you can download kernel-sourcecode rpm from ULN. There is no kernel-sourcecode for OEL-5 available on ULN site.
    NJ

  • The system cannot find the file specified.Windows sockets error code:2.

    Hi All,
      I am on MDM 5.5 SP6.
      I am getting the following error message when trying to logging in to the DM.
    The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
    Runtime Error :
    Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
    R6025.
    -Pure virtual function call.
    And in console also the MDM server is stopped after getting the above error message.
    Can anybody tell me what could be the problem?
    Thanks & Regards
    Sireesha.

    Hi Sireesha,
    According to me, there can be 3 problems,
    1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
    2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
    3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
    Along with this, please refer to the link below :
    [[The system cannot find the file specified.Windows sockets error code:2.;]
    Hope it helps.
    Thanks and Regards
    Nitin jain

  • Creative Cloud not installing on my mac. it says (Error code: A12E5)

    Creative Cloud not installing on my mac. it says (Error code: A12E5). What do I do?

    Hi luelalamirew,
    Welcome to the Community!
    A12E5 is a download error. Please follow the mentioned steps:
    Mac:
    Navigate to Library/Application Support/Adobe/OOBE and rename to OOBE.old .
    Navigate to Applications/Utilities and trash Application Manager and Creative Cloud desktop folder.
    Download and install CC desktop again. If still the issue persists then restart Mac in safe boot and try installing again: http://helpx.adobe.com/x-productkb/global/start-safe-boot-mode-mac.htm l .
    Cheers!
    Ankit

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • I can't install itunes.  I get an error code 2894 with a message stating that the installer has encountered an unexpected error.  Anyone know what I need to do?

    I can't install itunes.  I get an error code 2894 & a message that states the installer has encountered an unexpected error installing this package.  Anyone know what I need to do to fix this? 

    Are you able to uninstall iTunes and QuickTime?
    You might have to search for the Windows Installer Cleanup Utility, which would allow you to remove some applications that you can't from Control Panel.
    Also, take a look at this Apple document -> Trouble installing iTunes or QuickTime for Windows.

  • I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

    I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem.  I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction.  Thank you!

    update directly, Product updates

  • I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

    Hi there,
    I have just tried to sync my iphone.
    Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
    I have just removed old iphone backups from itunes but was very careful to not delete the current one
    What does this code mean?

    http://support.apple.com/kb/TS1583

  • So when i try and install it it givs me the error code 205, how do i fix it

    so when i try and install it it givs me the error code 205, how do i fix it

    Hi 123jasen,
    I believe you are trying to download the Creative Cloud.
    Please refer to the thread and help document below to where this issue stands resolved:
    1. Re: Installing Creative Cloud-Error 205
    2. Error downloading Creative Cloud applications
    Regards,
    Sheena

  • Cannot Install Sql Server 2008, Gives The Error "Database Engine Services Failed"

    I cannot install Sql Server 2008 R2 on Windows 8. Tried many times but failed because it gives the error "Database
    Engine Services Failed". Sql files cannot be corrupted because i can install the same setup on Windows 7 and i can connect to databases.
    I tried all the things below;
    * I'm uninstalling everything related with Sql Server from Control Panel/Programs And Features.
    * I'm deleting all the keys related with Sql Server from Regedit.
    * Later i'm restarting windows, and trying to install again. But during the install it gives the error "Database
    Engine Services Failed", install is finishing but when i opened the Management Studio i cannot connect to Database Engine with Sa naturally.
    * My firewall is already closed. And i have not any antivirus software.
    * I gave the permission for port 1433 on firewall.
    Please help me. Why i always take "Database Engine Services Failed" error? I will get crazy cause of that for many days.

    Here's the ERRORLOG file which i found under the folder;
    Microsoft SQL Server/MSSQL10_50.MSSQLSERVER/MSSQL/Log.
    2014-09-27 03:39:40.15 Server      Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64) 
    Apr  2 2010 15:48:46 
    Copyright (c) Microsoft Corporation
    Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    2014-09-27 03:39:40.15 Server      (c) Microsoft Corporation.
    2014-09-27 03:39:40.15 Server      All rights reserved.
    2014-09-27 03:39:40.15 Server      Server process ID is 5768.
    2014-09-27 03:39:40.15 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3540VX/3440VC/3440VX'.
    2014-09-27 03:39:40.15 Server      Authentication mode is MIXED.
    2014-09-27 03:39:40.15 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
    2014-09-27 03:39:40.15 Server      Registry startup parameters: 
    -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    2014-09-27 03:39:40.15 Server      Command Line Startup Parameters:
    -m SqlSetup
    -f
    -Q
    -q Turkish_CI_AS
    -T 4022
    -T 4010
    -T 3659
    -T 3610
    2014-09-27 03:39:40.18 Server      Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.  After
    the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
    2014-09-27 03:39:40.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-09-27 03:39:40.18 Server      Detected 4 CPUs. This is an informational message; no user action is required.
    2014-09-27 03:39:40.31 Server      Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
    2014-09-27 03:39:40.32 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-09-27 03:39:40.43 Server      Node configuration: node 0: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2014-09-27 03:39:40.45 Server      Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No user action
    is required.
    2014-09-27 03:39:40.45 spid7s      Warning ******************
    2014-09-27 03:39:40.45 spid7s      SQL Server started in single-user mode. This an informational message only. No user action is required.
    2014-09-27 03:39:40.46 spid7s      Starting up database 'master'.
    2014-09-27 03:39:40.52 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2014-09-27 03:39:40.58 spid7s      SQL Server was started using the -f flag. SQL Server Audit is disabled. This is an informational message. No user action is required.
    2014-09-27 03:39:40.59 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:40.59 spid7s      Server started with '-f' option. Auditing will not be started. This is an informational message only; no user action is required.
    2014-09-27 03:39:40.59 spid7s      Starting up database 'mssqlsystemresource'.
    2014-09-27 03:39:40.61 spid7s      The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
    2014-09-27 03:39:40.94 spid7s      Password policy update was successful.
    2014-09-27 03:39:40.94 spid8s      Starting up database 'model'.
    2014-09-27 03:39:40.95 spid7s      Server name is 'CAGATAY'. This is an informational message only. No user action is required.
    2014-09-27 03:39:41.21 spid8s      Clearing tempdb database.
    2014-09-27 03:39:41.21 spid10s     A new instance of the full-text filter daemon host process has been successfully started.
    2014-09-27 03:39:41.24 Server      A self-generated certificate was successfully loaded for encryption.
    2014-09-27 03:39:41.24 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
    2014-09-27 03:39:41.24 Server      Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag
    7806. This is an informational message only. No user action is required.
    2014-09-27 03:39:41.28 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
    to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    2014-09-27 03:39:41.28 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
    2014-09-27 03:39:41.70 spid8s      Starting up database 'tempdb'.
    2014-09-27 03:39:41.86 spid7s      Warning ******************
    2014-09-27 03:39:41.86 spid7s      Attempting to change default collation to Turkish_CI_AS.
    2014-09-27 03:39:41.92 spid7s       index restored for master.syspriorities.
    2014-09-27 03:39:41.95 spid7s       index restored for master.sysbrickfiles.
    2014-09-27 03:39:41.96 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:41.96 spid7s       index restored for master.sysowners.
    2014-09-27 03:39:42.13 spid7s       index restored for master.sysdbreg.
    2014-09-27 03:39:42.16 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.16 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.16 spid7s       index restored for master.sysschobjs.
    2014-09-27 03:39:42.17 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.17 spid7s       index restored for master.syscolpars.
    2014-09-27 03:39:42.17 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysxlgns.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysxsrvs.
    2014-09-27 03:39:42.18 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysnsobjs.
    2014-09-27 03:39:42.18 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.syscerts.
    2014-09-27 03:39:42.19 spid7s       index restored for master.sysrmtlgns.
    2014-09-27 03:39:42.19 spid7s       index restored for master.sysxprops.
    2014-09-27 03:39:42.19 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.19 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.31 spid7s       index restored for master.sysscalartypes.
    2014-09-27 03:39:42.31 spid7s       index restored for master.sysidxstats.
    2014-09-27 03:39:42.31 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysendpts.
    2014-09-27 03:39:42.32 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysclsobjs.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysremsvcbinds.
    2014-09-27 03:39:42.32 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysrts.
    2014-09-27 03:39:42.33 spid7s       index restored for master.sysasymkeys.
    2014-09-27 03:39:42.33 spid7s       index restored for master.syssqlguides.
    2014-09-27 03:39:42.44 spid7s       index restored for master.syssoftobjrefs.
    2014-09-27 03:39:42.47 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.48 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.49 spid7s       index restored for master.spt_values.
    2014-09-27 03:39:42.49 spid7s       index restored for master.MSreplication_options.
    2014-09-27 03:39:42.56 spid7s       index restored for tempdb.syspriorities.
    2014-09-27 03:39:42.56 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s       index restored for tempdb.sysowners.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s       index restored for tempdb.sysschobjs.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.59 spid7s       index restored for tempdb.syscolpars.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysnsobjs.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.syscerts.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysxprops.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysscalartypes.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysidxstats.
    2014-09-27 03:39:42.61 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysclsobjs.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysremsvcbinds.
    2014-09-27 03:39:42.61 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysrts.
    2014-09-27 03:39:42.62 spid7s       index restored for tempdb.sysasymkeys.
    2014-09-27 03:39:42.69 spid7s       index restored for tempdb.syssqlguides.
    2014-09-27 03:39:42.69 spid7s       index restored for tempdb.syssoftobjrefs.
    2014-09-27 03:39:42.75 spid7s       index restored for model.syspriorities.
    2014-09-27 03:39:42.75 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.75 spid7s       index restored for model.sysowners.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.76 spid7s       index restored for model.sysschobjs.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.syscolpars.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysnsobjs.
    2014-09-27 03:39:43.00 spid7s       index restored for model.syscerts.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysxprops.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysscalartypes.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysidxstats.
    2014-09-27 03:39:43.01 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysclsobjs.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysremsvcbinds.
    2014-09-27 03:39:43.01 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysrts.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysasymkeys.
    2014-09-27 03:39:43.01 spid7s       index restored for model.syssqlguides.
    2014-09-27 03:39:43.01 spid7s       index restored for model.syssoftobjrefs.
    2014-09-27 03:39:43.02 spid7s      Starting up database 'msdb'.
    2014-09-27 03:39:43.82 spid7s       index restored for msdb.syspriorities.
    2014-09-27 03:39:43.85 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.93 spid7s       index restored for msdb.sysowners.
    2014-09-27 03:39:43.99 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.09 spid7s       index restored for msdb.sysschobjs.
    2014-09-27 03:39:44.12 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.20 spid7s       index restored for msdb.syscolpars.
    2014-09-27 03:39:44.20 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.20 spid7s       index restored for msdb.sysnsobjs.
    2014-09-27 03:39:44.20 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.25 spid7s       index restored for msdb.syscerts.
    2014-09-27 03:39:44.25 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.26 spid7s       index restored for msdb.sysxprops.
    2014-09-27 03:39:44.26 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.26 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.27 spid7s       index restored for msdb.sysscalartypes.
    2014-09-27 03:39:44.37 spid7s       index restored for msdb.sysidxstats.
    2014-09-27 03:39:44.41 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysclsobjs.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysremsvcbinds.
    2014-09-27 03:39:44.42 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysrts.
    2014-09-27 03:39:44.54 spid7s       index restored for msdb.sysasymkeys.
    2014-09-27 03:39:44.54 spid7s       index restored for msdb.syssqlguides.
    2014-09-27 03:39:44.59 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.74 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.85 spid7s       index restored for msdb.syssoftobjrefs.
    2014-09-27 03:39:44.89 spid7s       index restored for msdb.syspolicy_policies_internal.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.sysproxies.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.syscollector_execution_stats_internal.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.syssubsystems.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.log_shipping_primary_secondaries.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.sysdownloadlist.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.log_shipping_monitor_primary.
    2014-09-27 03:39:44.92 spid7s       index restored for msdb.sysoriginatingservers.
    2014-09-27 03:39:44.93 spid7s       index restored for msdb.log_shipping_monitor_history_detail.
    2014-09-27 03:39:44.95 spid7s       index restored for msdb.log_shipping_monitor_error_detail.
    2014-09-27 03:39:44.95 spid7s       index restored for msdb.log_shipping_secondary.
    2014-09-27 03:39:44.97 spid7s       index restored for msdb.log_shipping_secondary_databases.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.log_shipping_monitor_secondary.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysjobs.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysutility_ucp_mi_file_space_health_internal.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysutility_ucp_mi_database_health_internal.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.syscollector_blobs_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_mi_dac_execution_statistics_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysjobsteps.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_ucp_dac_file_space_health_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.logmarkhistory.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_mi_session_statistics_internal.
    2014-09-27 03:39:45.12 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.12 spid7s       index restored for msdb.sysdtscategories.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.syspolicy_target_sets_internal.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysutility_ucp_mi_volume_space_health_internal.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysschedules.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysdac_instances_internal.
    2014-09-27 03:39:45.33 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.50 spid7s       index restored for msdb.sysssispackages.
    2014-09-27 03:39:45.51 spid7s       index restored for msdb.sysutility_ucp_computer_cpu_health_internal.
    2014-09-27 03:39:45.51 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.52 spid7s       index restored for msdb.sysssispackagefolders.
    2014-09-27 03:39:45.52 spid7s       index restored for msdb.sysdac_history_internal.
    2014-09-27 03:39:45.53 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.syscategories.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.systargetservers.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.systargetservergroups.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.syspolicy_policy_category_subscriptions_internal.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.sysalerts.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.sysoperators.
    2014-09-27 03:39:45.63 spid7s       index restored for msdb.syspolicy_system_health_state_internal.
    2014-09-27 03:39:45.63 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.63 spid7s       index restored for msdb.syscollector_config_store_internal.
    2014-09-27 03:39:45.65 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.65 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.65 spid7s       index restored for msdb.sysmanagement_shared_server_groups_internal.
    2014-09-27 03:39:45.66 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.sysutility_mi_smo_properties_to_collect_internal.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.sysmanagement_shared_registered_servers_internal.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.syscachedcredentials.
    2014-09-27 03:39:45.79 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.79 spid7s       index restored for msdb.syscollector_collection_sets_internal.
    2014-09-27 03:39:45.79 spid7s       index restored for msdb.sysutility_ucp_dac_health_internal.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.MSdbms.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.MSdbms_datatype.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.sysmail_profile.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.sysutility_ucp_managed_instances_internal.
    2014-09-27 03:39:45.83 spid7s       index restored for msdb.syspolicy_management_facets.
    2014-09-27 03:39:45.84 spid7s       index restored for msdb.sysutility_ucp_mi_health_internal.
    2014-09-27 03:39:45.86 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.86 spid7s       index restored for msdb.syscollector_collector_types_internal.
    2014-09-27 03:39:45.86 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.86 spid7s       index restored for msdb.syspolicy_configuration_internal.
    2014-09-27 03:39:45.87 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.87 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.syspolicy_facet_events.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.sysmail_account.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.syspolicy_conditions_internal.
    2014-09-27 03:39:45.88 spid7s       index restored for msdb.sysutility_ucp_health_policies_internal.
    2014-09-27 03:39:45.88 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.88 spid7s       index restored for msdb.syscollector_collection_items_internal.
    2014-09-27 03:39:45.90 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.00 spid7s       index restored for msdb.sysmail_servertype.
    2014-09-27 03:39:46.00 spid7s       index restored for msdb.sysutility_ucp_filegroups_with_policy_violations_internal.
    2014-09-27 03:39:46.02 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_policy_check_conditions_internal.
    2014-09-27 03:39:46.03 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_configuration_internal.
    2014-09-27 03:39:46.03 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_policy_target_conditions_internal.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.sysmail_server.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.syspolicy_policy_categories_internal.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.syspolicy_object_sets_internal.
    2014-09-27 03:39:46.04 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.sysmail_configuration.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.sysdbmaintplan_databases.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.log_shipping_primary_databases.
    2014-09-27 03:39:46.39 spid7s      The default collation was successfully changed.
    2014-09-27 03:39:46.39 spid7s      Recovery is complete. This is an informational message only. No user action is required.
    2014-09-27 03:39:47.17 spid51      Changed database context to 'master'.
    2014-09-27 03:39:47.18 spid51      Changed language setting to us_english.
    2014-09-27 03:39:47.72 spid51      Setting database option RECOVERY to FULL for database model.
    2014-09-27 03:39:47.84 spid51      Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.84 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:47.98 spid51      Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:47.98 spid51      Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:48.27 spid51      Error: 15007, Severity: 16, State: 1.
    2014-09-27 03:39:48.27 spid51      '' is not a valid login or you do not have permission.
    2014-09-27 03:51:25.13 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:51:25.13 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:51:32.67 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:51:32.67 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:51:42.11 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:51:42.11 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:52:42.07 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:52:42.07 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:53:01.23 Logon       Error: 18461, Severity: 14, State: 1.
    2014-09-27 03:53:01.23 Logon       Login failed for user 'CAGATAY\cagatay'. Reason: Server is in single user mode. Only one administrator can connect at this time. [CLIENT: <local machine>]
    2014-09-27 03:53:17.57 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:53:17.57 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:53:32.54 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:53:32.54 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:04.29 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:54:04.29 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:10.36 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:54:10.36 Logon       Login failed for user 'CAGATAY\cagatay'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:47.18 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:54:47.18 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    Resolve the error, please refer to the following links.
    Enable DAC:http://www.mssqltips.com/sqlservertip/2538/enabling-dedicated-administrator-connection-in-sql-server-2008-express-edition/
    could not register the SPN Kerberos:
    http://saveadba.blogspot.com/2012/03/could-not-register-spn-kerberos.html  
    Make sure the password of sa is correct,and the login 'CAGATAY\cagatay' has been created in SQL Server

  • I cannot install any add on. Download error -228

    When I try to install an Add-On, I get the following message:
    Firefox could not install the file at
    because: Download error
    -228
    This happens with ANY Add-On download. Theme or Add-On.

    See if this works. Try downloading the .xpi file for the add-on, to do that right-click on the installation link and choose "Save link as". Then in the Firefox menus choose "File > Open File" and open the .xpi file that you downloaded. That should install the add-on.

  • Attempting to install creative cloud update. fails with error code 87. Where do I find an unfinished install?

    I have received the error code 87 when attempting to update Creative Cloud. I had previously received an update for Acrobat Pro (not the CC version), and the install failed. Now I cannot install any Adobe product. How do I resolve this issue? Rather important that there is not a long delay.

    If you are on windows computer, Open Task manager by pressing Ctrl + Shift + Esc keys
    Locate and end all Adobe related processes, like Creative Cloud, Core sync, AAM update notifier, Acrobat updater, AdobeArm, Acrotray, Adobe installer.
    Then try

Maybe you are looking for

  • How to transfer File CC properties from XI to PI 7.1

    Hi friends! I am working on upgrading XI 3 to PI 7.1. When I import the configuration  scenario and try to activate the communication channel I am getting the error message, caused by the fact that SWCV SAP BASIS 6.40 not exist in PI. So I need to ch

  • Finder window preferences

    I've done some searches but haven't come across this question (maybe because it's so simple). When I open my main finder window after login, and click on applications, the column view is arranged with "Date Modified" selected, and all the apps arrang

  • Aironet Bridge 1310 strange message? % Unrecognized host or address, or pro

    Hi, When I configure an ip address on the interface 0 and I then try to ping an ip address I get the follwing message: ap#ping 10.70.20.1 % Unrecognized host or address, or protocol not running. What is wrong? Thx, Marc

  • FMS in UDO

    Dear All, there are 2 UDOs created n been used without liking to any dll object, no sdk codings too be done. each Document type tables have 1 document row type table linked with it. i.e the child table been linked with the parent table. From the docu

  • Vista Drivers - Please read here first before making a new post

    We all want drivers for Vista as soon as possible. However no one here can predict when a driver for a given product will be released. This is a User to User forum so there is no one here from MSI to ask about when or if a driver will come out. We al