Cannot Install Thinkpad Configuration Utility and Cannot Find it on Downloads Site

I uninstalled the Thinkpad Configuration Utility and when I try to reinstall the installation fails.  It no longer seems to be a download option on the Lenovo support site.  Has this utility been withdrawn and if so what replaces it?  This link
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67988
with the latest BIOS update talks about using the utility to determine which version is installed which would seem an odd thing to do if the utility is no longer supported!
Message Edited by BMGRAHAM on 05-16-2008 12:00 AM

Hi,
Pls check the site
http://java.sun.com/xml/jaxb
The JAXB Beta Implementation is now available.
Thanks,
Bhakti
I am looking for JAXB and cannot find a download link.
The only thing at the download link is the jaxb arch
spec, but no s/w.
Where is this stuff? Has it been taken off?
-Mark Sabatini

Similar Messages

  • What happened to Thinkpad Configuration Utility and UltraNav Wizard?

    I ran System Update and installed the latest Thinkvantage software -- and two existing utility programs disappeared: Thinkpad Configuration Utility and UltraNav Wizard.  I'm surprised because there was no indication this would happen.  And I'm concerned about losing function.  In particular, I found the Configuration Utility an easy way to configure my laptop.
    I have a W500 running Windows XP.

    mlinehan wrote:
    I ran System Update and installed the latest Thinkvantage software -- and two existing utility programs disappeared....
    I have a W500 running Windows XP.
    AFAIK, the ThinkPad Configuration Utility isn't supported for any Thinkpad later than the T60 models..... it may partially work on a W500 but there are almost certainly some things that wont work.
    If you are happy running unsupported utilities,  its available here.....
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4ZFRG3
    Cheers,
    Bill
    I don't work for Lenovo

  • SPA122 cannot access web configuration utility

    The new SPA122 device connected to router through DHCP.
    I can see IP-address on router's web page, can ping it, and receive it with ****110# IVR command.
    But I cannot access web configuration utility in the browser: the page is unavailible. I tried to allow WAN access with ****7932#1#1 IVR action - the problrem still on.
    Can You give me any advice what to do.

    You can also connect to the lan/ethernet side of the device, do an ipconfig /renew
    You should get an address on the 192.168.15 network, the default for the router in the ATA is 192.168.15.1
    Then you can set up the non default password, enable the wan web server (administration tab I think).
    dlm...

  • Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth?!

    Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
    ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
    obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
    normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!

    ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

  • I cannot install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe".  What to do?

    I cannot install a previously purchased version of acrobat 9 pro downloaded from the site.  Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe".  What to do?

    Hi hgratz,
    Considering 'invalid serial number' error for Acrobat 9, I would suggest you to please refer the KB doc link mentioned below:
    Error "Invalid serial number" | Acrobat 9 | CS4
    Let me know if that helps.
    Regards,
    Anubha

  • Error occurred in deployment step 'Activate Features': Feature with Id 'GUID' is not installed in this farm, and cannot be added to this scope.

    Really frustrated!!! Using SP 2010 with VS 2010. Created a simple project with just 1 elements.xml file for adding 2 columns. Scope of the feature is "Site". When I right click and deploy it gives below error.
    Error occurred in deployment step 'Activate Features': Feature with Id 'GUID' is not installed in this farm, and cannot be added to this scope.
    If I look at the CA, I see the wsp is installed but NOT deployed (Status = "Not Deployed", "Deployed To" = None). I have checked the GUID in the error and its my feature id.
    Please let me know what is going wrong here! Thanks for your help.
    Please mark as 'Propose as Answer' or 'Vote' as appropriate.

    Hi Sagir,
    Try to check the GUID in error message to see if it’s in Feature1.Template.xml file.
    For more information, please refer to
    http://markviky.blogspot.com/2010/09/error-while-activating-feature.html
    http://alltoft.wordpress.com/2011/06/13/sp2010-error-occurred-in-deployment-step-activate-features/
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • Dropbox: I cannot get video to play and cannot share pictures with those who do not have Dropbox installed.

    Dropbox: I cannot get video to play and cannot share pictures or video with those who do not have Dropbox installed.
    iMAC
    I am running OSX 10.6.8
    Processor:    3.06 GHz Intel Core 2 Duo
    Memory:      4GB

    To share either select the link (paperclip) icon on the right of the file or folder list.
    Cut and paste the link into an email you send your friends. Do not use the "share this" option in Dropbox as it forces them to join.
    You can test it after deleting your browser cache and cookies - you will no longer be signed in to Dropbox but the link should work fine.
    Hope this helps !

  • I've downloaded and installed flashplayer five times and cannot get it to work

    I've downloaded and installed flashplayer five times and cannot get it to work.  Each time I go back to espn3 it tells me to install a new flashplayer.

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/thread/1195540

  • I had a new motherboard installed in my laptop and cannot...

    I had a new motherboard installed in my laptop and cannot hookup to my wireless connection. There is an unsecured network named 'linksys' which I assume is my router. So I tried the 'wizard' and everything was going smoothly until I put in the default IP address (192.168.1.1) and then it wants a subnet mask which I don't know. What am I doing wrong?

    is there any wired/wireless computer going online through the router ?? let me know the router model number and the ISP deatils...

  • I just installed a new router and cannot get my ipad to connect now and I have no idea what settings should be or how to go about this

    I just installed a new router and cannot connect with my ipad now.  I have no idea what settings I shold be looking at or how to do this

    you likely need to setup your router using an eathernet cable and a computer to turn on the wifi part and set an encryption level and password or the likes
    if you havent do such things before you may require help from somebody who have
    the router likely comes with an instruction manual how you set it up the first time

  • Cannot install itunes, because previous version cannot be removed.

    I just removed Itunes (not sure the version) because I kept getting a message that I was unable to burn or copy any cd's and would be required to re-install Itunes. Now I try and download Itunes newest version and I receive a message that says Previous version of Itunes cannot be removed,please contact system administrator. I usually run my Ipod Shuffle and my daughter's Ipod touch. Now, I can't run either of them. Can anyone give me a suggestion that works. I tried removing Itunes and related programs as per Apple's support instructions.

    the message says unable to remove and to locate the source of AppleSoftwareUpdate.msi.
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any *Apple Software Update* entries and click "Remove".
    Quit out of CleanUp, restart the PC and try reinstalling iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Hi just downloaded itunes 10.5.1.42 on windows vista, since then cannot connect to itunes store and cannot update iphone

    Hi just downloaded itunes 10.5.1.42 on windows vista, since then cannot connect to itunes store and cannot update iphone.
    Did try to uninstall itunes and to reinstall but no changes still the same issue. Also tried to install older version of Itunes.
    Need HELP

    Hi , I am recieving the same issues. I have been experiencing issues for about 2 months now.
    Cannot connect to itunes store. Cannot sync my iphone and download the update i have uninstalled and resinstalled. Its definetly not the internet. I even went to the apple store and noone at the genius bar could help me. Such a waste of time

  • TS4062 My daughter's ipod touch 4th Gen cannot sync over wi-fi and cannot be seen in the devices section of itunes for windows.

    My daughter's ipod touch 4th Gen cannot sync over wi-fi and cannot be seen in the devices section of itunes for windows.  I have gone through all steps of the troubleshooting guide.  All of our other ios devices are wi-fi sync-ing fine.   Can anyone help?
    Not sure how long this has been a problem.  Kids are young and I manually manage most things but recently having music synced is an issue.  All software has been kept up to date.

    bayfsmithy wrote:
    I have read through the forgotten passcode section.  Itunes will not recognise the ipod until the passcode is entered (thats the message it keeps saying), when I press try again, it says unknown error. 
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...

  • My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Cannot install new version of itunes, cannot remove old version

    cannot install new version of itunes, cannot remove old version

    http://support.apple.com/kb/ht1925
    See this for your query.

Maybe you are looking for

  • Problem with nokia maps N95 8Gb

    I've been trying to use the GPS navigation trough NOKIA MAPS but it doesn't work, in my phone's screen appears "the license has expired" or something like that. I'd like to know what i've to do to make it work.  Because Iv'e heard that tthe GPS navig

  • ISight not working from one user account on MacBook

    Hi everyone, It'd be great to get some help with fixing an iSight camera. I've followed the instructions here: http://support.apple.com/kb/HT2090 and have narrowed it down to a particular user account (it has admin permissions). Other user accounts c

  • Reoccuring Problem with Router

    Every once in a while, my router will disconnect for no reason. When I try to reconnect, Windows says it can not connect, and when I diagnose the problem, it says the connection was cancelled. I'm using Windows Vista Home Edition, and my router Model

  • Why canot I setforeground or setbackground for HTextButton ?

    I'm writing a xlet that display a button using HTextButton. By default, the button is displayed on screen with WHITE for forecground and BLACK(transparency) for background. When i setforeground or setbackground for it, stb can not load this xlet ( bu

  • Terminal says 'unknownf81edfe49998' Huh?

    I've been doing some research into defragging on a Mac. Mixed info about it. It seems that it depends on the kind of user you are. Nice article here http://bit.ly/OSX_defrag with some interesting advice at bottom +you can simply open the Terminal and