Cannot install Touch ID after update 8.1.3 in iPhone 5s.

Cannot install Touch ID after update 8.1.3 in iPhone 5s. In trying to install unlocking my phone is refused, as is allowing access to iTunes and App Store. Before updating I used Touch ID without any problem.

Restore iPhone with iTunes on computer. If after the computer Restore there are still problems, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone to Apple for resolution.

Similar Messages

My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple Hongkong

Pls help me
My iphone 5s lose Touch-id after update ios 7.1 . What should i do now ? My Iphone is from HongKong but now i lives in Viet Nam . Is there anyway that I can transfer my Iphone to Apple Hongkong

In iOS 7.1, the setting has changed locations and is in the same grouping with General, Wallpapers, etc. Also, if you have not set a passcode, you cannot see or set Touch ID. If you restored the phone as new and it still does not provide you the option to set a passcode, and then Touch ID, then it is possible there is a hardware error. Since you purchased the device in Hong Kong, as described before, you can only get a friend/relative to take it to Apple, or you will have to do it yourself. Unfortunately that is what can happen when you need warranty work and have purchased a device outside of the country that you live in.

Cannot Install 10.5.1 Update

Hello,
I have installed After Effects CS5.5 for Mac on OS X v10.7.5. I downloaded the After Effects CS5.5 10.5.1 update, and I cannot install it. The update installer vaporizes/quits/crashes before it can even appear in the Dock. I went looking for a crash log in the Console but did not find any trace of what did (or did not) happen.
Can the After Effects CS5.5 10.5.1 update be installed on Mac OS X v10.7.5? If so, where should I be looking to resolve this vaporize/quit/crash when I launch the 10.5.1 updater?
Thanks for reading!

Make sure that you downloaded the correct updater. See this page for details:
http://blogs.adobe.com/aftereffects/2011/06/after-effects-cs5-5-10-5-1-update-fix-for-text -entry-bug-and-serial-number-problem.html
Note that there is only one bug fix in this updater, so unless you are working with large amounts of text in a single text layer, you may not even need to apply this update.

You cannot install mac os x update combined on this volume

Hi all,
I need your precious help. I have install in my imac leopard 10.5.7 and last night I tried to update for 10.5.8, however the software update didn't identify the new update.
After that I download the update from Apple website but I couldn't do the update because of this message: "you cannot install mac os x update combined on this volume. This volume does not meet the requirements for update".
Could you please help me?
Thanks,
lG

lgcustodio wrote:
I ran the disk utility and saws verify disk ok. I did the same process for repair disk permissions and seems to have problems.
These warnings are accurate but according to Apple can safely be ignored. See Mac OS X 10.5: Disk Utility's Repair Disk Permissions messages that you can safely ignore. IOW, They are not normally problems.
I check the volume scheme but I don't have any partition
You do have partitions & a partition scheme. To check what the scheme is, click on +the drive itself+ in the list on the left in Disk Utility. It will probably be identified as "298,1 GB WDC WD3200AAJS-40VWA0 Media" or something very similar. If it contains the startup disk, it will be the first item in the list. It will have one or more named volumes indented under it, such as "Macintosh HD."
When you have clicked on the WDC drive instead of a volume name indented under it, you should see seven items of information about it at the bottom of Disk Utility's window, to the right of an icon representing the drive. The info is in two columns. The last item in the rightmost column, below the S.M.A.R.T. Status (which should say "Verified"), should be "*Partition Map Scheme :* " & be followed by the scheme type. It should be "GUID Partition Table."
If you don't see the seven info items after selecting the drive, it may indicate a problem that needs attention, but I suspect that you just haven't looked in the right place for the info....
As for the 'cannot install' message, make sure that you have downloaded the right update, that it is not the server update version for example. You may need to download it again, discarding the first download as somehow defective.

Cannot backup and sync after updated iTunes

Cannot backup and sync after updated iTunes. Have tried to hard reset iPhone (all data lost- sad) and reinstalled iTunes. Still cannot work.

It sounds like you bough the song only, not the song and the ringtone.
Ringtones via itunes are available in the U.S. only.
In the U.S. to make a ringtone you:
Buy the song with a bell - 99 cents
Find the song in your library and click the bell
This bring up the editor.
You edit the song to the portion you want.
Then click buy to purchase the ringtone - another 99 cents.
Then it shows up in ringtones and you can sync.
As I said, this method of creating ringtones is available in the U.S. only.
There are, however, many ways to make ringtones:
http://www.iphoneatlas.com/2008/01/02/guide-the-many-methods-for-using-custom-ip hone-ringtones

Unable to install any addons after updating to Firefox 7.0.1

I am not able to install any addons after updating to firefox 7.0.1. Addons are still working. Addons will start to download but will get stuck at 100% download progress.

What addons do you already have installed? Could be one of them is interfering with the downloads somehow...

10.5.8 update_'You cannot install Mac OS X Update on this volume.'

You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update.
This is the message I get when I click on the hard drive I wan to install it on, I have two hard drives, neither want to work with it. the one with the osx 10.5 has 63 gb left and the empty one has 102gb left. Why is it doing this/ what should I do?

If you're not using the combo updater, use it instead.
(55808)

TS3103 I have aol and cannot acesss my email after updating to osx 10.6. the help says that I need mail 4.6. I have 4.5. How do I get the correct version?

Ihave aol and cannot acesss my email after updating to osx 10.6. the help says that I need mail 4.6. I have 4.5. How do I get the correct version?

Run all software updates.
http://support.apple.com/kb/TS4424

I cant install apps to my iphone after updating to iOS6 ( i have iphone 4s)

Please help ....I cant install apps to my iphone after updating to iOS6 ( i have iphone 4s)

It says unable to download this app at this time and then gives the option "done" and "retry"

How to delete photos off my ipod touch 4g after updating

How do u delete photos off my ipod touch 4g after updating it to ios 6.0.1?

To delete photos and videos from your device
To delete synced photos and videos
In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Choose "Selected albums" and deselect the albums or collections you want to delete.
Click Apply.
To delete Camera Roll photos and videos
There are two methods to delete items from the Camera Roll:
Import the Camera Roll to your computer, choosing to delete items after import.
or
Delete photos and videos from your device manually. Open the Photos application, open the Camera Roll, tap the Action button, tap each photo to select it, and tap the Delete button.
Note: For photos and videos you want to save for later, import them to your computer before deleting them from the Camera Roll.
http://support.apple.com/kb/HT4236

"You cannot install Mac OS X Update on this volume."

"You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update."
This is the error I got when I tried to update my Macbook from OSX 10.5.6 to 10.5.7.
I downloaded this file (http://support.apple.com/kb/DL826)
A quick Google search suggested I get this one instead (http://support.apple.com/kb/DL827) The "Combo" update.
Well, the 10.5.7 Combo Installer didn't help either.
My friend suggested I try 10.5.8
Same error message again.
I really need to get at least 10.5.7 for software ASAP. I plan on getting Snow Leopard next month or so, but I really need at least 10.5.7 in the meantime. Any ideas?

Some things I've tried:
- I ran a Verify Disk in Disk Utility, and it said there are no problems.
- Update Logs haven't shown any errors, nor has my computer ever tried to download the update and failed, according to the log.
- I tried checking updates on a different account, no luck there.
So far, that's all I've tried. Some of the other solutions seem more drastic, and so I'll leave those up to the skilled Tech Support guys on my campus, I've got an appointment tomorrow.

I cannot install creative cloud after running the cleanup tool can any one help

I cannot install creative cloud after running the cleanup tool can any one help?

Hi len@iostudios,
Please follow the link https://helpx.adobe.com/download-install.html to install creative cloud.
Incase you have any issue
Please let us know with the exact error or attach the screenshot if possible.
Regards

TS1368 cannot connect itune store after update ios 6

cannot connect itune store after update ios 6

Hello Dannard Lee,
It sounds like you aren't able to connect to the iTunes Store, or update your device to iOS 8. I would use the troubleshooting from the following article to help troubleshoot the issue, and it seems to be they may be related to one another:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Thank you for using Apple Support Communities.
Regards,
Sterling

HT4623 How can I retrieve my Contacts that I lost after updating iOs 6 on my iPhone 3GS through wifi?

I lost all my Contacts after updating iOS 6 on my iPhone 3GS through wifi. All my other apps, Notes, Photos, etc are as it is but none of my Contacts appear. I also signed up to iCloud during the update but can't find Contacts on iClouds. Pls help!

It is strange people experience this problem only with Contacts because normally contacts are backed up with Notes and Photos and that stuff. If you are willing to do a do-over, you can try to backup, restore, and put your data back on again and see if anything new appears. You never know if some file clould have had some kind of conflict because iOS 6 was being installed while data was being restored at the same time.

HT204053 I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.

Cannot install Touch ID after update 8.1.3 in iPhone 5s.

Similar Messages

Maybe you are looking for