Cannot install Version 7.0.1 on my iMac running OS X 10.6.7

When I try to update by moving Firefox to the Applications folder, it creates a new untitled folder containing all my applications plus Firefox 6.0.2. It doesn't matter if I try the 'Update" or "Download " full version.

Your free space on the boot drive is OK. Don't let it get much lower or you may start to see lower system and application performance.
Have you tried the following?
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that fails boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try there. Then reboot normally and try again.
OT

Similar Messages

I cannot install Photoshop Elements 2.0 on the iMac I got last year. I have been using the PSElements on my PC OK. What should I do besides getting the latest PSElements?

I cannot install Photoshop Elements 2.0 on the iMac I got last year. I have been using the PSElements on my PC OK. What should I do besides getting the latest PSElements?

I think PE 2 only worked as far OS 10.3 Panther. There is no alternative but to get the version that works on your 10.7 Lion Machine, which I think is PE 6 or higher.

Problem installing officejet pro 6830 software on my iMac running Snow Leopard

Greetings, I have a problem installing officejet pro 6830 software on my iMac running Snow Leopard. When I insert the HP software disc onto my iMac, and go to the HP website, it says:
"403" Ooops! Request forbidden...
Any possible solutions to this? Thanks for any feedback...

Hi @RNOjetnow ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with needing the drivers for the 10.6 Snow Leopard OS. You should be able to install the Apple Drivers just by connecting the USB cable.
Here is a document that might help.
Hope this helps you install the drivers.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Cannot Install Version 7 of iTunes

I have a Sony Vaio running Windows XP Home. I have a previous version of iPod on my computer but I just purchased the 80GB iPod. In order to get this thing up and running, I have to download the new version 7 of iTunes. I've done that, but now when I try and install it on the computer, I get a message that says I cannot install until I remove previous versions from my hardrive. I go to the Remove/Change Programs, click on the old iPod icon and hit "remove", but nothing happens---it won't let me remove the darned old version. Any suggestions? I want to use the new iPod and download all the iTunes I purchased and all my old music, but this is getting frustrating. I'm getting no help from Sony.

I've done that, but now when I try and install it on the computer, I get a message that says I cannot install until I remove previous versions from my hardrive. I go to the Remove/Change Programs, click on the old iPod icon and hit "remove", but nothing happens---it won't let me remove the darned old version.
okay, download and install the Windows Installer CleanUp utility. use that to remove the previous versions of the ipod updater installation configuration information. (in my copy of Cleanup, they typically show up as "Ipod for Windows [date]".)
Description of the Windows Installer CleanUp Utility
does the itunes install go through after running cleanup?

Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
Any help would be greatly appreciated.

Hello,
I just installed Windows 8.1 on my Late 2013.
There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
1. I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
All went very smoothly except that my mouse was not working.
2. To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'. Problem was, it was nowhere to be found.
So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
Once that was done, my installation was completed.
The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
Good luck!
I'm looking forward to getting STEAM up and running to see how this thing games!

Installing a full version of Photoshop 6 on new iMac running SnowLeopard

I currently use a PowerPC G5 running OS 10.5.8. The G5 uses the old processors and Photoshop CS5 upgrade won't load because Photoshop CS5 only runs on the new Intel processors. My question: If I buy a new iMac with the Intel processors, is there a way to install a full version of Photoshop 6, and upgrade for Photoshop 7, CS, CS2, CS3, CS4, CS5? When my daughter tried this approach, and tried to install the full version of CS 6, she received the message Classic OS was not installed so that ended the attempt. Do I have to buy a full version Photoshop CS5 for the new iMac? Thanks for any help, Doug

Another, often cheaper, route to upgrade is to find an older version upgrade and do a two step upgrade since you are out of the Adobe window.
You may be able to find a CS3 upgrade, buy that. Then purchase the CS5 upgrade.
http://www.amazon.com/Adobe-Photoshop-CS5-Upgrade-Mac/dp/B003B32B14/ref=sr_1_1?ie=UTF8&qid =1294166832&sr=8-1
This route would still cost $400. But that is still a couple hundred dollars less than buying a full version of CS5 outright.
Just because Adobe stops selling older version upgrades, it doesn't mean all retailers stop selling them.

HT5037 I have just installed version 10.8.3 to our imac and now I can't open iPhoto. Does anyone have any suggestions? I tried to upgrade it but it dosen't work

Hello
We recently installed version 10.8.3 to our 2 year old mac and now we could'nt open iphoto, it told us to install library upgrader, so we did and it still won't work. any suggestions.?
thank you in advance

it told us to install library upgrader, so we did and it still won't work.
And have you run the iPhoto Library Upgrader after you installed it? First run it, to prepare your iPhotLibrary for upgrading, and then launch iPhoto again to complete the upgrade of your library.
Regards
Léonie

Installing Windows 7 on a late 2009 iMac running Mavericks

I'm running a perfectly good late-2009 iMac running Mavericks and had a bootcamp partition that worked until I needed to replace my hard drive.
Now I want to install Windows 7 (via bootcamp) for gaming. Bootcamp 5 won't download the software or allow a USB/ISO Windows 7 load due to my model/ROM version, which is:
Model Name:               iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.33 GHz
Number of Processors:          1
Total Number of Cores:         2
L2 Cache:                      6 MB
Memory:                       8 GB
Bus Speed:                    1.33 GHz
Boot ROM Version:        IM101.00CC.B00
I've read quite a few threads about the apple software download server issues, creating an ISO, adjusting the BootCamp package, using virtualbox, etc. to bypass this. But can't find anything addressing my specific situation where I'm running mavericks AND have an older ROM version that won't allow USB install for some stupid reason.
I've made an ISO boot disk (and USB), tried adjusting my BootCamp package strings, and have virtualbox, winclone, Daemon tools, etc. but can't get to the point where I can upload the bootcamp software and Win7. Has anyone solved this problem?

No one has done this before?

Cannot install version 7.4 on my windows 2000 PC

I have just bought an 8GB Nano but when I try to install it I am asked to upgrade to latest version above 7.4. However, iPod no longer supports Windows 2000 above version 7.3.2. which is the latest version on my PC. How can I get around this?

You can't get round this except by upgrading your operating system. iTunes 7.3 is last version to work with Windows 2000.
Your only alternative is to manage your iPod with third party software, some examples:
Yamipod
http://www.yamipod.com/main/modules/home/
Foola
http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
anapod
http://www.redchairsoftware.com/anapod/
EphPod
http://www.ephpod.com/

When will Firefox version 27.1 be compatible with aol toolbar used with my iMac OS version 10.7.5? I cannot install version Firefox 27.1 until fix is in place

I have an iMac desktop Operating System version 10.7.5.
Current Firefox Version 26 allows me to use AOL toolbar.
When I went to download / install updated Firefox version 27.1, message that appeared
said this version was incompatible with AOL toolbar.
Installation could only be complete if I disabled AOL toolbar which is NOT an option.
Please advise when this Firefox version 27.1 incompability issue will be fixed.
Thanks in advance.
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

The message likely said it was the toolbar that was not compatible with Firefox 27.0.1. It is up to the Extension authors to make their Extension compatible with Firefox not the other way.
Unless the Extension is ties with a application with a binary like with Antivirus toolbars, the majority of Extensions that have been compatible since say Firefox 10.0 should still work for example.
Have you checked for updates for this Aol toolbar extension?

How to install my pre-installed version of ML from my new iMac, in my old macbook?

i bought an imac that came with ML pre-installed... and i have a macbook that i wish to update to ML... how can i do that without having to buy the downloadable version of ML from the apple store?..... since i already have it preinstalled in the new iMac.. i shouldn't have to buy it since i already did with my new iMac.... please help me solve this issue...

It always was this way. The disks that shipped with a Mac could not be used on another Mac because they were hardware specific. So, there's a more pragmatic reason you can't use it, it's got specific drivers for your iMac.
In a recent post, someone tried cloning the system to their old Mac and wound up in a world of grief.

Cannot install Windows 8.1 on Late 2013 iMac

Attempting to install Windows 8.1 (retail) using Boot Camp Assistant but when I get to the "Select disk to install windows" screen, nothing appears.
I'm using a retail copy of the Windows 8.1 full installer DVD and I have the midrange 21.5" late-2013 iMac.

Installed my retail copy of Windows 8.1 from Windows 7 without any hiccups or hacks. Windows 7 can be installed in trial mode for free and easily by downloading a legal ISO from Digital River. Create a USB installation with Boot Camp Assistant and proceed as normal using the Windows 7 ISO. During Installtion, skip entering a license. After Windows 7 is successfuly installed, boot back into OSX and create just a drivers USB using Boot Camp Assistant. Boot back into Windows, insert your retail Windows 8.1 disc or use your download and let it install. Be prepared to do several "Hold-Option" boots to kick it into windows. Installation probably had 6 reboots.
Digital River ISOs
Windows 7 Home Premium 32Bit:
http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64Bit:
http://msft.digitalrivercontent.net/win/X17-58997.iso
Windows 7 Professional 32Bit:
http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64Bit:
http://msft.digitalrivercontent.net/win/X17-59186.iso
Windows 7 Ultimate 32Bit:
http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64Bit:
http://msft.digitalrivercontent.net/win/X17-59465.iso
Thanks, and I hope this helps whoever needs it. I always hate when someone finds a fix and never reports back.

I cannot install a Canon MX420 printer to my Imac. It will not show up in the printer preference bar

I am trying to install an all-in-one printer CanonMX420 and the printer is not showing up as a printer option. At a loss

Have you downloaded latest drivers from Canon web site ?
Have you tried setting the printer using its IP address ? (you can configure it either from the web interface embeded within the printer or via the config screen)
Mine is just showing up in the preference pane. My only issue (after having setup vuescan and removing it) is that I can not access it using default interface. I have to use VueScan and nothing else...
But i's working fine.

I recently installed the latest security updates on my IMAC running 10.9.5. Since then the mail client cannot download email anymore, neither Apple Mail nor Thunderbird works. It always comes back and asks for a different password.

The ISP tells me that this is a known problem with the latest MacOS updates.

OS X Mail: Troubleshooting sending and receiving email messages

I installed Office:mac 2011 on my new iMac running 10.8.3 and discovoed my file transfer from my old macbook installed Office:mac 2088. Now I have both installed and none of the office apps work - I keep getting the same error message

I recently purchased an iMac to replace my 2008 macbook.
I used migration assitant to transfer all of my macbook files to the iMac. I noticed that I had the old 2008 version of Office:mac 2008 on the iMac and decided to install Office:mac 2011 which installed successfully.
However, now I can't open excel or word or powwerpoint now using either 2008 or 2011.... I just get an error message saying there was an error and the app had to close. It offers to send a report to Microsoft.
I tried moving Office:mac 2008 to trash but this didn't resolve the issue.
Can anyone help (I am not a really sohpisticated user so be gentle)
Thanks Dave

Hello Dave,
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Cannot install Version 7.0.1 on my iMac running OS X 10.6.7

Similar Messages

Maybe you are looking for