Cannot Install Vista Version of Power Manager - T60

I recently changed my Windows to Vista from XP and have gotten into a situation where I can't install the Power Manager utility.
I followed the directions for upgrading to Vista and uninstalled the XP version before installing Vista. When I try to install the Vista version, I get a pop-up saying that I must uninstall Power manager before continuing. Power Manager does NOT show up in the Install or Unistall Programs list.
I imagine that there's some trash left in the registry, but am hoping someone has already been through this.
Al
T60 (8744-5BU) Vista

Hello!
You could try to use CCleaner (free download) and let it check the registry for all residual entries of the previously installed power manager - this will give you the option of cleaning out the registry (make a full backup of the registry just in case).
Either that, or re-install that older/previous version, and uninstall once again - it's quite possible that the previous uninstaller didn't delete all entries in the registry. Also check the "Program Files" directory under ThinkVantage for any folders that contained the power manager software - if the directory still exists, delete it, then try installing the vista version again.
If all that fails, you could try Revo Uninstaller (freeware) - it can fix many "uninstall" leftovers and/or uninstall issues.
Hope this helps!
Steve

Similar Messages

No admin privilege. Cannot install latest version of iTunes

I have no admin privileges for corporate laptop. Cannot install latest version of iTunes. No problem with previous versions. Any ideas?

Hey Roderick136,
If you haven't encountered issues previously, then I would try following the steps in this link:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Let us know if that helped resolve the issue.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Cannot install flash version 10.1.0 onto a mac 10.4.11

Hello,
I cannot install flash version 10.1.0 onto a mac 10.4.11 and therefore cannot use YouTube or the BBCIplayer. Is there a compatability problem?

I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

Cannot install latest version of i-tunes on computer

cannot install latest version of i-tunes on my computer

I am getting issue while downloading iTunes 11.1.3 for my Iphone 4S
I am successfully able to install the iTunes on the computer, but when I open the software I get following Error:
"Apple Application Support was not found.
Apple Application Support is required to run iTunes. Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2) "
Any help ?

Cannot install new version of itunes, cannot remove old version

cannot install new version of itunes, cannot remove old version

http://support.apple.com/kb/ht1925
See this for your query.

Power Manager for Windows Vista - MIGR 67216 - Power Manager Utility for Vista

I have been trying to install the Power Manager Utility for Windows Vista (MIGR 67216) hoping that this will solve my Power Manager error. The Power Manager shuts down automatically whenever I start the computer or try to access the Power Manager. Dow anyone have a solution?

I have had the same issue, this is the work around that cleared it on the t61p
a) downloaded TVT SU 3.14 exe package from Lenovo web site
- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66956&selectarea=SUPPORT&tempsel...
- the vista sp2 patch http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758
b) un installed power management
c) un installed TVT SU and cleared directory under http://forums.lenovo.com/lnv/board/message?message.uid=135306
d) installed the TVT SU package
e) launched the TVT SU and it downloaded TVT PM and other stuff

Windows 2000 version of Power Manager for A75

Hello all
I have installed Windows 2000 in an A75-S226 but I can't find a Power Manager utility for that OS. I have already tried the Windows XP version but, as expected, it did not work.
Is there anybody else using Windows 2000 with this model ?
Thanks,
Rubens

Hi
This unit was designed and delivered in the US market
It was able for me to find a power utility driver for W2k on the Toshiba US website.
Please check this link:
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=729833&moid=713725&BV_Ses sionID=@@@@0394886756.1138114313@@@@&BV_EngineID=c ccfaddgkkelmigcgfkceghdgngdgmn.0&ct=DL
Bye

Latest versions of Power Manager and Access Connections got borked.

I have a T60p running a fully patched XP SP2, model 2007CS3, and I work for IBM. I'm posting this because our internal IT support team has no clue how to fix this.
I updated Power Manager to 1.52 when it had initially released, and since then it always fails with an error in pwmuictl.dll, however the taskbar indicator is working properly. So I have to rely on Windows' built in power management only.
Couple of days back I updated the ethernet drivers to 9.12.41.1001 as in the latest package listed on the site.
After that Access Connections 5.2 stopped working- the AcSvc service would fail on startup and subsequent restarts.
I rolled back the ethernet driver to the previous version- uninstalled the device and reinstalled specifying the older drivers- to no avail.
After a lot of struggle I downgraded it to version 4.23 that is used internally- and now my LEAP based wifi does not work. If I create a new connection profile- Access Connections craps out after filling in wifi security parameters. I reset my LEAP password and tried again- it still does not connect.
So effectively, updating the ethernet drivers turned out to be a big mistake. I hope someone can help, if you need additional information/screenshots let me know.

Hello Martin,
you have AC 5.02 instead 4.52 installed, like your screenshot shows.
Some user have been experienced problems with this version and the version of new Powermanager.
So if your system runs satisfactionally then there is no need to update.
I would roll back and see if your program became operationally again.
Kind regards
Andreas
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Cannot install Vista on my Toshiba NB250-10G

Hello. Toshiba NB250-G, part no. PLL2XE-001001EN originally with win 7 32 bit.
I'm trying to install Vista for reason of compatibility with family machines. The installation proceeds to collecting files and then stops with the following message:- Error code 0x80070070 Windows cannot copy files required for installation etc etc. I suspect the need for a driver to precede the windows files.
Can anyone help me, please?
T I A, J

Hi
I have checked Toshiba download page and, as I can see your machine is not supported for Vista. It is supported for Win7 32bit only so, in my opinion it would be better to stay with Win7.
I don't know what kind of compatibility is important for you but there is no big difference between Vista and Win7.
I presume you have created bootable USB stick with Vista. When Vista setup wizard starts is HDD recognized properly? Can you create or choose partition where OS should be installed?

Cannot install latest version of iTunes 10.6.

Running 64 bit Windows Vista Home . Failed to install latest version of iTunes 10.6 with error message "The feature you are trying to use is on a network resource that is unavailable.......click OK , or enter an alternative path to a folder containing the installation package iTunes64msi"
After using this source in the box below and clicking OK it comes up with another error reading: "the file C:\Users|My name\AppData\Local\Apple Software Update\iTunes64msi' is not a valid installation package for iTunes. Try to find installation package 'iTunes64.msi" in a folder from which you can install iTunes".
As I could not find this file I then uninstalled iTunes, Bonjour, Apple Software Update, Apple mobile device support, and Quicktime and all related files as instructed from iTunes support page and tried to re-install all again. Unfortunately they all installed except iTunes which came up with the same error messages again.
Is this an Apple or Windows problem?...........HELP!

"The feature you are trying to use is on a network resource that is unavailable.......click OK , or enter an alternative path to a folder containing the installation package iTunes64msi"
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Cannot install new version of iTunes

I cannot install the newest version of iTunes due to cpu not finding "iTunes.msi"

I cant download either
https://discussions.apple.com/message/15280628#15280628
wish theyd fix it

Cannot install newest version of iTunes

I cannot install the newest version of iTunes as I get an error message: "Cannot write value to key \Sopftware\Classes\Tunes.aa\shell\open\command. Check if you have sufficient access rights for this key, or contact the support personnel". What to do?

Hey BertBes,
Thanks for the question. I understand you are experiencing issues installing iTunes for Windows. The following resource may provide the solution:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Cannot Install Latest Version of Skype - Presumabl...

I presently have version 6.18. When I try to install latest version I get a message "cannot open HKEY\LOCAL\MACHINE32\Software\Microsoft\Internet Explorer\Main\Feature Control\FEATURE_MAXCONNECTIONSPERSERVER".
When I check the registry I do not even have a MAX_CONNECTIONSPERSERVER key under Feature Control. I've tried adding it but do not apparently have the permission level.
Any help would be appreciated.

Try this Lessmsi method:
http://community.skype.com/t5/Windows-desktop-client/Impossible-to-install-v6-13-0-104-Error-1603/m...
Be aware that if you want to install the currently latest 6.22.81.104 version, then you should use SkypeSetup_6.22.81.104.msi file in order to extract Skype.exe and Login.cab files.
SkypeSetup_6.22.81.104.msi file can be downloaded using this link:
http://download.skype.com/msi/SkypeSetup_6.22.81.104.msi

Cannot install any version of IE

Hi there,
I am having some issues with one of our Terminal Servers, which is running Windows Server 2008 R2 64bit. It did have IE9 installed and when tried to upgrade this to IE10 or IE11 it was failing with the error "Internet Explorer did not finish installing".
There is no much helpful info in the event logs either.
So, following some other advice on here, I was pointed to the fact it could be that IE9 was corrupt and could be upgraded. I was advised to remove IE9 and try installing it again and then go through the upgrade process. However, there is an issue here. Once
IE9 was removed (through Uninstall an update in Control Panel), IE8 wasn't there. I still cannot install IE 9, 10 or 11 on this server now. What's also a concern is that now I cannot open Event Viewer or any other MMC as it shows an error about MMC will not
run with a version of Internet Explorer earlier than IE 5.5.
Any tips or ideas on how to resolve this?

You can ask them in IE forum: https://social.technet.microsoft.com/Forums/ie/en-US/home?forum=ieitprocurrentver
They are more familiar with this.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Installer built with Application Builder gives error "Cannot install, higher version already installed"

I am having an issue with an installer which I created with the Application Builder. I have a project that I have successfully deployed. Subsequently I created another project (and vi) which is based on a copy of the originals, both with new file names. In the renamed project file, I changed all file names, paths, and all resources, to reflect the new names. I also changed the installer’s destination and install folders, of course. I reset the executable’s version number (in the Build Specification properties) to 1.0 (the original was 1.3). I then successfully built an executable and the application installer. However, when I run the installer (setup.exe), it gives a dialog (after the license screen) that it “Cannot install” because a “higher version already installed”.
I’ve done exactly the same thing with other vi’s and projects of mine, and never had this issue. The installer correctly installs the newly created (and renamed) version where it is told to in the project file. Also, I’ve never had a problem deploying (installing) on my development PC either.
I have carefully checked and rechecked to make sure there is no reference to the original executable or paths. What could be causing this behavior? I want to keep the two projects completely separate, so simply changing the version to higher than 1.3 is not an acceptable solution.
Thanks to anyone in advance for any help and suggestions.
Ed

Yes, LV 8.5 does NOT give me control over the GUID. In the project file there are three such strings:
"App_applicationGUID"
"App_INI_aliasGUID"
"App_INI_GUID"
They all have different numbers and none of them match the GUID or PackageGUID in setup.ini. I don't know if they are related or not, but usually it's not a good idea to mess with (manually edit) files like these (project, ini, etc.) unless you know what you are doing. (For example, I do edit the setup.ini file to change some of the [Dialogs] parameters, but that is based on direction from NI support.)
Anyway, like I said, I've made copies of projects before and never ran into this problem. At least I have a solution, however laborious, in creating a new project file from scratch.
Let me know if anyone has more thoughts on this.
Ed

Cannot Install Vista Version of Power Manager - T60

Similar Messages

Maybe you are looking for