Cannot install Win 7 Via BC with magic mouse? Its my only mouse. Answers??

I just got my new imac today with the only mouse I have...the magic mouse. I put my win 7 install DVD in through boot camp and no reception at all. How do I install win 7 without my magic mouse before I can install the drivers for it?

I had the same problem at first and I went and checked the solutions page on this site, their answer is to boot in mac and re-pair your mouse with your system after you have installed your windows bootcamp and it should work. I did that and my magic mouse works just fine in my windows partition. Hope this helps!

Similar Messages

(SOLVED)Cannot install WINE (x86_64 Arch)

Hey.
I cannot install WINE. I already enabled =multilib=, did "pacman -Syu", restarted.
sudo pacman -S wine
error: target not found: wine
I did "pacman -Scc" a few times and chose "Yes" when I was asked to clear unused Repos.
Any thoughts?
Thanks
Last edited by archie0 (2012-03-21 09:40:11)

Next time, please copy the text instead of using a screenshot.

I am registered user of Phtoshop CC but when i installed and signed in with my credentials its shows as an trial version

I am registered user of Phtoshop CC but when i installed and signed in with my credentials its shows as an trial version.My ID [email protected] is subscribed for the product Photoshop CC by Creative Cloud for teams (one year membership) Capgemini India Pvt Ltd, so i downloaded and installed the photoshop CC but its installed as an 30 days trial version. Please guide me to get my full ersion

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

i installed windows 7 in macbook pro. but its booting only by windows not by mac. how to enter in mac?

Hold Option key when starting - that gives you the option to choose between startup disks.

Cannot install Win 8 on a late 2013 iMac using bootcamp on 10.9

I'm trying to install Win 8 on a late 2013 iMac (purchased a couple of months ago)
I have a win 8 pro DVD, but obviously there is no DVD in this iMac. I usally use the DVD drive in my older 2009 iMac for any disk based installs but I can't appear to use it here.
I followed the instructions and downloaded a Win 8 Pro ISO from Microsoft to use with my authentication code, created a bootable USB using bootcamp, created the partition and rebooted. Once I'd entered the code I get to the install location but it says I cannot install on the partition created by bootcamp. Even if I format the partition it says I need a GPT drive but I have MBR, so won't let me install.
I tried several suggestions including creating aprtitions in various other programs and once I even got past that screen, but as soon as it tried to install I got another error saying the MBR was formatted incorrectly and it failed.
I had no issues installing Win 7 via bootcamp on the older iMac, but this one has me stumped. I used to think I knew a bit about computers, but I'm fairly new to Mac related issues as the older iMac has always just worked.
Any help would be greatly appreciated.

Hello,
I just installed Windows 8.1 on my Late 2013.
There are just a couple of things I had to do that deviated from the Boot Camp Installation Manual.
1. I downloaded my copy of Windows 8.1 as an ISO image AND as a bootable USB from the Microsoft site.
Not sure why I did that but it came in handy because Bootcamp was taking a very long time to copy the ISO onto the USB stick..
The ISO copying seemed to freeze up, but it's likely that it was just taking a long time, probably 20mins.
So, instead of waiting, I took the contents of the the USB startup stick and simply moved them over to the stick that Bootcamp had formatted for the ISO copy (I cancelled that copy function and deleted any files that had copied but didnt complete).
Once that was done, the machine rebooted from the USB stick and began the normal Windows setup process.
All went very smoothly except that my mouse was not working.
2. To get around the mouse issue, I simply plugged in a MS USB Mouse and it worked immediately.
The Bootcamp manual advised that the way around this was to 'click in upper right corner and search for Bootcamp'. Problem was, it was nowhere to be found.
So, using my MS mouse, I navigated to the 'DESKTOP' icon in Win 8.1 and found File Explorer, which showed my USB stick connected along with Bootcamp and the MS Support File (i.e. All the Apple Drivers).
I began manually clicking on all the driver files until realizing that there IS a Bootcamp executable which will automatically install the drivers for the Nvidia card, keyboard, camera, mouse, etc....
Once that was done, my installation was completed.
The entire process took about an hour, but now that I've done it, it really shouldnt take much more than 45 mins.
I have the late 2013 iMAC, with the GTX780M and 1TB Fusion Drive i5 Quad Core.
For those who are leery about doing this, please note that I'm a PC 'lifer' and this is my very first go-around with doing anything on an Apple product.
It all went much more smoothly than I could have imagined, but if you are not a PC person, you might be a little challenged finding the Bootcamp in File Explorer or doing anything in Win 8.1 to get over these minor hurdles.
Good luck!
I'm looking forward to getting STEAM up and running to see how this thing games!

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

Cannot install itunes 7.7 with Vista due to bonjour service issues

(I do have itunes version 7.6.2.9 working fine with no issues on vista)Cannot install itunes 7.7 becoz vista doesnt let bonjour service to run, While trying to start the Bonjour service from the Windows Services console gives an other error: "Windows could not start the Bonjour service on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code -65549." Is there any way I can get Bonjour to install and run as a service? tried switching off windows defender and Norton Internet security along with norton firewall too, still it doesnt let me install ,even tried downloading the windows version of bonjour but it too doesnt get installed as the service cannot start
Event report:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">1013</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2008-07-11T12:32:31.000Z" />
<EventRecordID>69102</EventRecordID>
<Channel>Application</Channel>
<Computer>Revelations</Computer>
<Security UserID="S-1-5-21-216963075-3724653442-2767649758-1000" />
</System>
- <EventData>
<Data>Product: iTunes -- Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data />
<Data /> <Binary>7B45463643343630302D333036442D344636412D413131392D433241383737443235423 4417D</Binary>
</EventData>
</Event>
The Bonjour Service service terminated with service-specific error 4294901747 (0xFFFEFFF3).
Any comments and advice would be higly appreciated
regards
Message was edited by: Vistacrap
Message was edited by: Vistacrap
Message was edited by: Vistacrap
null

Apple offer this advice which I guess is not much help to you as you have Norton:
http://support.apple.com/kb/TS1609?viewlocale=en_US
I wonder if it is worth looking in the your firewall configuration>>Programs and deleting any entry for Bonjour - in the hope that you will be prompted to allow it or not when you do the install, or maybe adding it back with permit all.
But someone came up with another possible solution at the end of this thread:
http://discussions.apple.com/thread.jspa?threadID=1540617&tstart=0

Cannot install win xp by boot camp

acturally, I install the Win Xp sp2 before, but I found the network very unstable, so I uninstall it. and the HD has already separated in two parts. however, when I want to install the win xp sp2 again, the Boot Camp showed that it cannot install in the HD which has two parts. to , How can I combin the two parts as original? use boot camp or others? thank you so much`!!

My guess is you deleted the Windows OS not using Boot Camp Assistant (which for future reference is the easiest way to to do it) & now you have an empty partition plus the normal OS X one, what you call 'separated parts.'
If so, just as the Boot Camp documentation mentions, Boot Camp Assistant will refuse to set up the drive for Windows since it only does this for a drive with a single OS X partition.
One simple solution is to run Disk Utility, select your HD from the list (not the volume name like "Macintosh HD" indented under it), & click on the "Partitions" tab. Locate the empty Windows partition in the window -- it should be the lower one of the two you see -- & click the minus button to remove it. Then drag the tab at the bottom right of the OS X partition down all the way to the bottom so that it uses all the space the just deleted partition occupied. Click Apply, wait for the procedure to end, & quit Disk Utility.
Now run Boot Camp Assistant again, following the instructions in the documentation, & it should be fine.

I cannot install windows 7 x64 with AMD/ASUS RAID driver

Trying to install Windows 7 Ultimate x64 on an ASUS M5A97 mobo with AMD SB850 RAID, two WD 750GB drives configured as RAID 0. No drives are recognized by W7 install, so I choose Load Drivers. I put the drivers on a USB stick. Install finds the drivers there,
starts loading them, then comes back with "Installing an unsigned 64 bit driver is not supported and may result in an unstable Windows installation." I downloaded the latest drivers from ASUS website which are WHQL certified (as are the one's on the motherboard
disk). I saw other posts that recommend clicking Repair instead of Install, but I don't see where that option is. All I am given as options are Upgrade or Install. Choosing Upgrade tells me to boot Windows first. But this is a brand new install so...
I tried pressing F8 as setup was booting and chose "Disable Signed Driver Requirement" but that had no effect at all. If I turn off the RAID W7 sees both disks and happily installs. I see related posts going back to 2009; surely someone has
a solution for this issue?
Da Bomb

Hi guys,
I have been struggling with the same issue.
Win7 x64. Gigabyte GA-X79-UD3 Mobo with Intel core i7-3930K at 3.20 GHz
Marvell 88SE9172 SATA RAID controller with two Hitachi 500 GB spinning disks configured as RAID1
Windows would get to the point of asking for a mass storage drive. It would not see the RAID I had created.
Tried every driver I could find. Tried drivers from the "Station Drivers" website. Tried Marvell drivers for the same chip from the ASUS website. No luck. Tried loading from CD as well as USB flash drive. Always the same result... Windows would find
the drivers appropriate for the hardware found, I would select the RAID version, and after a few seconds, would report that the drivers were unsigned, and the installation was not supported for 64-bit drivers. Clicking OK would take me back to the load drivers
display with no new drives listed in the available drives window.
I tried hitting F8 during startup, and selected the "allow install of unsigned drivers option". That didn't do ANYTHING. Still the same error.
Someone suggested putting the drivers in the root directory. That didn't work. I also disabled all other drives except one CD rom and a USB drive and made sure that my RAID array was the first drive in the boot list.
Tried doing a windows repair, as someone else suggested. (This is an option that is available on the install disk I am using. It's enabled as part of EMS (emergency management services) in setup. Anyway, this was reported to be a workaround
to the signed driver issue. It would allow me to browse to the individual files, but no matter which one I selected, the response was "cannot find hardware appropriate to the driver selected" or some such nonesense. So I gave up on that.
Doing the install with the controller in IDE mode with just one drive connected, would result is Windows installing without a hitch. The problem was clearly when I presented 64-bit windows with a controller in RAID mode.
Long story less long, here's what worked for me....
Out of desperation, I began trying other subfolders in the driver lists. The Gigabyte manual indicated that the AMD64 subfolder was the correct one for the Marvell controller, when using RAID mode with 64-bit Windows. After trying every subfolder of
every driver I could find, the driver in the i386 folder actually worked. It initially came back with the same error about unsigned drivers, but after clicking OK, my RAID drive showed up in the list. I have been able to partition and format
the drive from within Windows setup, and am continuing with the install now. Hopefully won't be any problems booting from the drive post install, but so far it looks good, and I'm relieved that I was able to get it this far.
The whole process has been one of the most frustrating computing experiences I've ever had. This is what it was like back in the 90's when building PCs from scratch. I'm amazed that in this day and age the process is still so poorly documented
and filled with potholes, traps and caveats. Shame on the entire PC industry for allowing this to continue. I'm not asking that they jump in and try to automate it and do all the thinking for me (their solution for everything lately)...all I'm asking for it
clear, concise and accurate INFORMATION.
With the right information, and software that provides accurate feedback, this would all be easy...and even fun.
Hope this helps someone faced with the same problem.

Cannot install WINS Server Role on Windows Server 2008 R2 Standard x64

Hi,
We are trying to install WINS Server Feature on a brand new Windows Server 2008 R2 Standard x64 (Virtual Machine). It seems that WINS is getting installed and right at the very end it gives an error 0x80070002.
We have tried rebooting the server multiple times , DNS/DHCP roles have been installed successfully as
well . It is just the WINS server feature that we are unable to install on this server.
Can someone point us to right direction. Are there any pre requisites we need to ensure before installing this feature. Are there any alternate ways to install
the WINS feature .. if yes please let us know.

The error indicates a File was not found:
C:\Users\Mark\Documents\Tools>err 0x80070002
# for hex 0x80070002 / decimal -2147024894
COR_E_FILENOTFOUND
corerror.h
# MessageText:
DIERR_NOTFOUND
dinput.h
DIERR_OBJECTNOTFOUND
dinput.h
STIERR_OBJECTNOTFOUND
stierr.h
# as an HRESULT: Severity: FAILURE (1), FACILITY_WIN32 (0x7), Code 0x2
# for hex 0x2 / decimal 2
ERROR_FILE_NOT_FOUND
winerror.h
# The system cannot find the file specified.
# 5 matches found for "0x80070002"
I would check a few things:
1) Is the OS activated (Control Panel/System)
2) Is the OS fully patched and has it been rebooted since it was patched?

Ongoing problem with flash player and FF..cannot install adobe Flash 11 with FF 16

I have tried everything.
I cannot install any Adobe flash product
I was using Flash 10 and suddenly it stopped working.
this happened before..several times in fact.
I delete and re install but this tim it still crashed.
so I decided to try Flash 11... windows 8 won't even let me run the installer.
when I try to install it as a FF plug in it fails.
sends me to do it manually.
manually means using the installer program which Windows 8 won,t let me run
I am stuck.
Is there an alternative to adobe flash player?
because I am tired of this.
if there is no alternative, then I will fins another browser.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Cannot instal xorg files - Conflict with another program.

I have a new install and set up my wireless, got pacman working good but there are a couple things that are not working. 1-cannot install powerpill, it just does not find it when i try to download it. 2 when I try to download xorg files it says there is a conflict with another program (not near my comp right now so i dont have the name of the program, i will post it later). I am more worried about getting xorg set up than powerpill. does anyone have any ideas? i am set up for fastest mirror and ran the pacman -Syu to update everything yesterday...

I am trying to install everything under xorg that comes up when you type pacman -S xorg. the error itself says that it conflicts with another program when i try to download it. it says do i want to remove program "x" but does both options still will not download. I will get the full info tonight.

CONFUSED CANNOT INSTALL LIGHTROOM VIA CREATIVE CLOUD.

Hi there - many thanks for your help in advance...I am using Lightroom 5 (Vs 5.7) which sits on my dock and in my applications folder (Mac) I see it is available as an update via Creative Cloud and I have the full Creative Cloud license. Each time I try to install it via the creative cloud 'Find New Apps apps' interface it does not do so. Also I am attempting to uninstall older CC versions of Photoshop Indesign and Illustrator vis the CC platform but although a waiting bar comes up they still remain. Am I doing something wrong. Thanks again, Steve

Thanks very much for your advice, have done what you suggested and logged out and in again, rebooted Mac and clicked on install for Lightroom and uninstall for others. So now - its now about three hours later and Lightroom install is frozen at 42% with no sign of movement and the uninstalling of other older cc versions of Photoshop, Indesign and Illustrator still in 'waiting' mode. Wonder what might be the problem? Thanks again Steve

Satellite L50-A-1d5 - cannot install Win 7 (32bit or 64bit)

Hi guys.
Very strange problem when i trying to install win 7.
I changed the bios setting to boot from cd and it works graet.
After the windows 7 install finish, the laptop resets and when the Windows 7 flag appears it's just freeze.(the keeps moving but nothing happend).
I allready tried 3 versions of windows 7 and always the same problem.
I also use Arconis via Hiren's and i cleaned the hard drive and installed again but..... the same problen accured.
any suggestions??
thanks a lot

What BIOS settings did you change exactly?
Usually you need to disable the secure boot and have to change the boot mode from UEFI to CSM mode.
By the way: did you use the clean original Microsoft installation disk to install the system or did you use an image backup for OS installation?

I cannot install Acrobat 10 along with CS 6 - Install MSI payload failed with error: 1635

I tried to install CS6 (CS4 already on the computer) but installing Acrobat 10 failed with the message "Install MSI payload failed with error: 1635". When I tried to install Acrobat separately from the payload folder, the installer offered to uninstall Acrobat 9 first but refused to accept the serial number for the CS 6 suite. Should I uninstall Acrobat 9 first separately? And if so, where do I get a correct serial number for the Acrobat 10???

is cs6 installed?
if not, run the cleaner: http://www.adobe.com/support/contact/cscleanertool.html
and then try installing cs6.

Cannot install Win 7 Via BC with magic mouse? Its my only mouse. Answers??

Similar Messages

Maybe you are looking for