Cannot install windows 7 using boot camp because screen turns off?

I have a late 2008 Macboook Pro 15 inch
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software OS X 10.9
After partition is complete through boot camp my mac restarts to instal Windows 7
The disk can be heard booting up but my screen is turned off.
After a min or so the keyboard goes active but screen remains off.
The disk is a store bought copy of windows 7
I have tried different installers and the same thing occurs the screen just turns off. You can hear the computer running but cannot see anything or do anything.
Have to hold down the power button to restart.
I tried booting it through a bootable usb same thing occurs.
Tried dowloadin drivers and putting them on MBRFAT usb like recomended for iMacs with a similar porblem. That Failed too.
Tried connecting a different monitor it didnt work.
So I am stumped has anyone had this problem. Not the black screen the screen being tuned off.
Ive been searching for days and havent found an answer realting to MBP.

Hold the option while turning on the computer. You should see your statup drives. Just choose the OS X drive and eject your disc once in OS X.

Similar Messages

I tried installing Windows 7 using Boot Camp, but it didn't work, I don't know how to "unparticion" the memory I gave to Boot Camp, and Boot Camp "vanished", help...

I tried installing Windows 7 using Boot Camp, but it didn't work.
Although it didn't work, the memory is still divided. So I looked for Boot Camp in aplications, but it literally vanished...
So I tried downloading it again, but I only found EXE files... they don't work on my MacBook Pro...
It's very new... Bought it recently...
Please... I need help to unparticion memory back to original Mac HD and install Boot Camp...
Thanks...

Below is the paragraph from the instructions. Follow it exactly and then report what happens at each stage.
How you remove Windows from your computer depends on whether you installed
Windows on a second disk partition or on a single-volume disk.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as
described below, remove Windows by deleting the Windows partition and restoring
the disk to a single-partition Mac OS X volume.
If your computer has multiple disks and you installed Windows on a disk that has only one
partition: Start up in Mac OS X and use Disk Utility, in the Utilities folder, to reformat it
as a Mac OS X volume.
To delete Windows and the Windows partition:
1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Remove Windows 7,” and then click Continue.
5 Do one of the following:
a If your computer has a single internal disk, click Restore.
b If your computer has multiple internal disks, select the disk with Windows on it,
and then select “Restore to a single Mac OS partition” and click Continue.

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

Hello Bhagyeshree
Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
OS X Mavericks: Add a network location
http://support.apple.com/kb/PH13788
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
-Norm G.

Stuck during Installing windows 7 using boot camp

Hi,
Anybody please help. I tried to install Windows 7 using boot camp, but always stuck halfway...please see the attached image for my failed attempt step by step. Please correct me, if i miss anything
1)
2) Then when click continue, this error came out,
I did watch in youtube how to install windows using bootcamp, there is no this type of notification supposed to come out.
3) Then , I continued, created the window installer using bootable pen drive and download the windows support.
4) But the, It just END here without proceeding to install window.
WHY IT JUST STOP HERE???PLEASE, SOMEONE TRY TO EXPLAIN AND GUIDE ME...AND WONDER IF U SEE THE NEXT IMAGE, I NEVER CAN JUMP STRIGHT TO THIRD STEP (INSTALLED OR REMOVE WINDOW), SINCE I DO HAVE THE BOOTABLE WINDOWS INSTALLER AND UPADATED SUPPORT SOFTWARE. I cant select the third option, it just greyed...
I would be great if somebody can help me out...I did try to install the windows almost 10 times already, never success...
I am using Macbook Pro Retina 13in (late 2013), Maverick 10.9.2, 2.8 Ghz Intel core i7, 8GB 1600 Mhz DDR3

Turbostar,
Yes, i do have more than one partion on my mac hard disk, so u meant, boot camp cant work with multiple partions?
If i need to format hdisk, this will be the second time, with my 3month old macbook..

My computer cannot install windows 7 using boot comp

hi
my computer macbook pro cannot install windows 7 using bootcomp

You really have not given any details.
Windows is easy to install, if you read and follow the instructions.

Can you install windows 8 using boot camp?

I open up boot camp and it say it can install windows 7 or later versions, and i have a widows 8 disk.

Welcome to Apple Support Communities
You have a compatible computer, so you can install Windows 8 with Boot Camp. Make sure you mark the option to download the Windows support software, that you will burn into a USB drive and you will install after installing Windows with Boot Camp.
If you need help installing Windows 8 with Boot Camp, see > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

How can I install windows 7 using boot camp, if the partition will not format correctly?

Hi All,
I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
I have an imac and I'm attempting to use boot camp. I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8. The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition. So, I recently obtained a full retail copy of Windows 7 and have been trying to install it. I have no problem with the boot camp assistant creating the new partition, 200 GB. However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.) So I choose "format" the further format the partition. It doesn't ask me how I would like to partition this, but just seems to start. All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition." I can click on the format tab endlessly but it still doesn't seem to work. Does anyone have any ideas? I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried. It doesn't seem to help either.
Thanks in advance for your help,
DTK

David Kaff wrote:
Yes, I choose "Format" under the advanced options screen. It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk. The selected disk is of the GPT partition style." I can continue to click "format" but i keep getting the same error.
There is the answer, right in front of us ....
Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again.

Unable to install Windows 8 in Boot Camp because of MBR

I just this weekend reformatted my MacBook Pro (Mid 2010, 15", 2.4 gHz i5) and so I had to reinstall Windows 8 with Boot Camp. I had it working fine before, although the lack of drivers made it absolutely terrible (Has Apple released any drivers for it yet?) but the installation went without a hitch. When I tried to install Windows 8 this time though, it did not work at all. On the OS X side, everything went as expected, and when I went to Windows installation everything worked until I had to select a partition. I feel like at this point I should point out that I have removed the optical drive from my Mac and have the Optibay in my optical drive bay and have a 128 GB SSD as my main drive and a 512 GB SSD in the optical drive slot, which was where my Bootcamp partition was, around 250 GB. I was installing Windows 8 using an external enclosure for my Superdrive with the Retail Windows 8 DVD full version. Anyways, when I went to select the partition, it said that it was unable to install because
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed GPT disks."
I have heard many conflicting resolutions to the problem, I have heard that I need to remove the other drive and install the optical drive and I have heard that this works very well, and many other things, I just want to find the correct solution to this. Thank you! And I hope I provided you with enough information!

I have a cd drive with a bootable windows 7 disc and I already downloaded the drivers needed to a pendrive on MS-DOS Format.
However this devil things asks me for a windows 8 disc.
Many many thanks if someone knows how to do it.

Problems installing Windows 7 using boot camp assistant

I have followed the guide form the Apple website and using boot camp assistant, I have managed to install Windows 7 Home Premium up to a point.
When the IMac re-boots and starts up in Windows 7 it tries to complete the installation but neither my mouse, keyboard or trackpad work.
This means I cannot enter a computer name in the first windows 7 screen, which in turn prevents the completion of the installation and the installation of the drivers for the keyboard, mouse and trackpad.
Does anyone have an idea how I can complete the installation?
I am using a 2012 IMac 27".
Thanks

Hi,
yes I used boot camp for everything and followed what was advised on the Apple web page. The USB remains in the back of the machine and it did download the windows drivers etc, but it doesn't seem to have installed them yet.
If I'm reading help manual properly, it is supposed to install them after windows 7 has been installed. But I can't get past the first Windows screen asking me to name my windows computer.
If I obtain a USB keyboard will that run without any drivers being required?
Thanks

Problems installing Windows 7 using Boot Camp

I have a brand new MBP Retina laptop (late 2013) with 256GB SSD. Today I tried to use Bootcamp Assistant to partition the SSD and install Windows 7 64 bit OS.
My first attempt was using a licensed Windows 7 64 bit installation DVD and my OWC external optical drive which is recognized in Finder:
I started Boot Camp Assistant, selected the boxes to download latest Windows Support Software from Apple and to Install Windows 7. I was asked to specify the size for the Windows partition and hit continue. The process was moving along, the computer restarted and then I got a black screen with a blinking white cursor (like a command line prompt) in the upper left corner of the screen and a message to press any key to reboot. Pressing any key did nothing.
As far as I could tell, the Support Software files that were on the USB drive did get installed prior to the first reboot of the system that happens after you allocate the size for the partition. After the first reboot I never got the Windows installer though, just the hanging black screen/cursor mentioned above.
I'm wondering if, after creating the partition and restarting, my computer can't see my external optical drive even though it does show up in Finder when booted to OSX because it was not reading the Win7 Install DVD at all.
While on the phone with Apple Senior Tech Support we rebooted several times holding down the Alt/Option key. The boot options were the OSX, Recovery, Windows, and EFI Boot. Choosing Windows resulted in the trackpad locking up and it just hung there. I ended up reverting the SSD back to a single partition for now.
After some discussion on the Apple forum I tried creating an ISO file from the Win7 64 bit DVD using ImgBurn software that I have installed on my Windows PC and ImgBurn indicated it had created a bootable ISO file. I copied the ISO file to the downloads folder on the MBP, plugged the empty USB drive into the MBP and tried Boot Camp Assistant again:
Choosing the appropriate option for use with an ISO file on a USB drive Boot Camp Assistant proceed to again create the partition, asked me to size it, and then it proceeded (over approximately an hour and a half) to work on copying the ISO file to the USB drive and downloaded the Support Software to the USB drive.
After the restart I got another black screen, cursor, and the messages, "No bootable device/drive found", "Press any key to reboot". Again pressing any key did not do anything. I reverted back to a single partition again, rebooted to OSX and gave up for the night.
Bottom line in either scenario is that I never get to the Windows installer screens to even attempt to install Windows on the new partition.
QUESTIONS:
I think in my situation it doesn't appear that ImgBurn created a bootable ISO file from my Win7 install DVD. The Apple Bootcamp Setup guide refers to downloading the ISO image from Microsoft but I couldn't find anything that I would be comfortable downloading.
I'd rather use my installation DVD for Windows but why isn't that process of reading the DVD from the external drive working after the restart?
Can the ISO file and Windows Support Software live on the same USB drive during installation and does the support software get installed automatically by boot camp assistant?
What am I doing wrong here? This shouldn't be this hard especially when I own a valid copy of Windows.
This is VERY frustrating. Any help or referrals to proper instruction is very much appreciated.

I was able to successfully complete the installation of Windows 7 Home Premium using Boot Camp. Turns out the problem was the Windows 7 ISO image I was initially trying to use. I called Microsoft tech support and they sent me a link (see below) from which I downloaded the Windows 7 Home Premium 64 bit ISO image. After downloading the ISO image and restarting Boot Camp Assistant the process of Boot Camp preparing and transferring the ISO image and Windows Support software to the USB drive took about 45 minutes and then everything went smoothly from there. The only thing I encountered was when I was asked what drive to install Windows on I got a message that it couldn't install on the Boot Camp drive because it needed to be in NTFS format. I clicked on the format button and then the process continued. After Windows installed the Windows Support Software from Apple started to install automatically. So far it is working well.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windo ws-7-home-premium-64bit-iso-download/709dcc12-d120-435d-91cd-52e1dd0f4c24

Top 15 or 20 mistakes I made installing Windows XP using Boot Camp/Leopard

There are pitfalls installing XP in Boot Camp. I'm pretty sure they are mostly covered somewhere on the Apple Bootcamp Support page. Here's what this Windows virgin found in the past few days installing XP on my MacBook Pro running Leopard. By all means, feel free to correct or add to my comedy of errors.
1) First run Software Update on your Mac to make sure you are working with the newest Mac software and firmware. If you are obsessive, run Disk Utility afterwards and restart. (I did this)
2) Follow the instruction in Apple's Boot Camp Installation Guide pdf to the letter. Don't skip anything. Don't assume anything. Print it if you can't run it on another machine during the Windows install. (I looked at it, not well enough.) Read #3-7 before you start the install.
3) Run Boot Camp Setup Assistant to "preformat" a Windows partition. 5 gigs is too small a partition and means more work later since XP eventually used up 5.6 gigs of my 32 gig partition (26.4 gigs free after a fully updated install of Win XP Service Pack 3 + anti-virus software + Adobe Reader + one app). (I avoided the too-small partition by dumb beginner's luck but see #4)
4) If you mess up your Windows partition and decide to start over, restart in Leopard and use Mac's Boot Camp Assistant to remove any inoperative Windows partition. If you are obsessive, run Disk Utility afterwards and restart. Then use Boot Camp Assistant again, as in #3 (I got to use this feature, too.)
5) Use the right Windows software. Win XP Service Pack 2 does install and can be updated after you have a solid XP installed with driver. Before you update, read #8-10. (I managed to buy the right XP software)
6) During installation, with the Windows Installer, you must reformat the Windows partition created by the Boot Camp Assistant. Don't get fancy and repartition: just format. Read pp. 13-14 of the Apple Boot Camp Installation Guide pdf. The Windows NTFS format using long, slow, careful reformat takes a looonnng time, long enough to make me think the installer was hung, except the cursor was blinking. (I did this but only after I tried to install the dumb way, without the Win installer reformat. If you don't reformat, you'll see a black screen, "Disk Error" with a flashing cursor at the top. Time to refer to #4.)
7) When Windows reboots after a successful install of XP SP 2, immediately eject the Windows install disk using Windows and immediately insert the Leopard Disk to install Windows drivers. (I did this. Some report problems with this step, but it worked for me.)
8) When you restart in Windows, run Windows Update to install everything except Service Pack 3. Mouse around the update feature a bit. If you don't update to SP 3, there is an optional install of a new IE 7 and an XP update that fixes some installer issues. (I did the optional install before I figured out #9 and tried to install SP 3 a couple of times. See #10 for what happens if you try to install SP 3 before #9.)
9) Using IE 7 in XP, go to the Apple Boot Camp page to download and install Boot Camp 2.1 Update For Windows XP. This installs on the Windows side, not in OS X. ( I did this, throwing caution to the wind and choosing "Run" when the download options of "Run" or "Save" appeared.) When BCUpdateXP.exe opens, the installer asks you to choose repair/update or uninstall. Choose repair/update. I think the machine needs a restart.
10) Now install XP Service Pack 3 using Windows Update. If you try to install XP SP 3 before the Boot Camp 2.1 Update for Windows XP, you will receive the following error message:
"There is not enough disk space on C:\WINDOWS\$NtServicePackUninstall& to install Service Pack 3. Setup requires a minimum of 4 additional mebabytes of free space or if you want to archive the files for uninstallation. Setup requires 4 additional megabytes of free space. Free additional space on your hard disk and then try again. Error Code 0x8007F003." It's a lie, assuming you set up a large enough Boot Camp partition at the outset. Both Windows and Disk Utility will tell you the size and available space of the Boot Camp partition.
Like I said, everyone is welcome to add the next 5 or 10 ways to mess up. Without Search, this forum is rough.

Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
Message was edited by: limo79

Installing Windows vista using boot camp..

I am trying to isntall windows vista using the boot camp and it says IMPORTANT: back up your disk before partitioning it or installing windows. I'm not quite sure on what that means or if i should continue in the boot camp because I don't know what that means......

*"I'm not quite sure on what that means"*
It means just what it says... backup your files prior to installing Boot Camp...in the event something goes wrong.

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Install windows 7 using Boot Camp

I have a 1st 13" MBA and would like to install Windows 7 as 2nd OS using Boot Camp. Can someone share some light on to me if it is pratical way to use Windows 7. I have tried VMware Fusion to install Windows XP and found the performance is far below expectation. The hard disk is just 80 GB and have 40 GB left. How much space I should allocate for Windows partition? Can I obtain any guidance to install it properly? Thanks!

In addition, the MBA does not have dvd player, how can I install Windows on DVD disc?

Cannot install windows 7 using boot camp because screen turns off?

Similar Messages

Maybe you are looking for