Cannot install Windows Embedded Compact, bad authorization code

Registered for Windows Embedded Compact 2013, received authorization code, downloaded installer, started installer, rejects authorization code that copied and pasted [did not type by hand]. Repeated entire process, received identical authorization code,
again rejected. What's the trick to installing Windows Embedded Compact 2013? Thanks.

Tried exact same process for Windows Embedded Compact 7 and had no difficulties. Apparently Microsoft has a problem with product keys for Windows Embedded Compact 2013. Case closed.

Similar Messages

Developing Windows Embedded Compact Application (installation issues)

I want to develop an application for a device running Windows Embedded Compact 7
I have downloaded the Application Builder for Windows Embedded Compact 2013 (VSEmbedded_AppBuilder.exe) from here and installed it on my machine
I am following the instructions from
this page which says that there should be a "Windows Embedded Compact" node within the New Project dialog box. There isn't
Additionally, if I launch VSEmbedded_AppBuilder.exe I get a window that only gives you the option to Repair or Uninstall and displays no information other information other than the fact that it is the Application Builder for Windows Embedded Compact 2013
that you are trying to run
I have tried repairing and uninstalling and it doesn't help. I have also tried restarting my pc between installing and opening visual studio. Doesn't help either
What am I missing here?
I'm running Visual Studio 2012 Professional on a Windows 7 machine. All I want to do is build an application for my Windows Embedded Compact 7 device
Thanks

You say that your device is running Compact 7
You downloaded a Visual Studio plug in for Compact 2013
You provided links to Compact 2013 documentation and tools
Since your device is running Compact 7, it would make sense to target your app to run on Compact 7 - if you target Compact 2013, your app
will not run.
You will need to install Visual Studio 2005 or 2008 - which one depends on what you plan to do.
Take a look at
http://embedded101.com/Blogs/SamuelPhung/entryid/211/Compact-7-Getting-Started-Part-4-Develop-Managed-Code-Application
Take a look at
http://embedded101.com/Blogs/SamuelPhung/entryid/216/Compact-7-Getting-Started-Part-5-Develop-Native-Code-Application
Take a look at http://embedded101.com/Compact7
Take a look at
https://msdn.microsoft.com/en-us/library/jj838858(v=winembedded.70).aspx
Take a look at CTacke's answer in
http://stackoverflow.com/questions/24241978/developing-net-compact-framework-apps-in-post-2008-visual-studio
Bruce Eitman (eMVP) Senior Engineer Bruce.Eitman AT Eurotech DOT com My BLOG http://geekswithblogs.net/bruceeitman Eurotech Inc. www.Eurotech.com

Cannot install Windows 8.1 via Boot Camp on MBPr 13" Early 2013; tried almost everything.

Hi guys,
yesterday, I decided to install Windows 8.1 on my Mac using Boot Camp. I tried to install it, but the first attempt ended into booting to the screen, where it says "Cannot find any bootable device" or something like that. So I googled it up and then tried the EFI Boot. The EFI Boot booted into the Windows installation properly, but I cannot choose the partition I want to install it on. I tried partitioning it in Disk Utility using Tuxera to NTFS, I tried formatting it in the installation itself, always restarted between the processes, I tried to delete the partition and create a new one in the installation, but no luck. I am still stuck on the error "Cannot install Windows on MBR partition. Please, choose a GPT partition". I have a 256GB SSD disk. I browsed the problems and solutions for 3 hours, but no luck. None of the solution helps. The only solution that would work I guess is if I don’t boot into EFI, but into the BIOS installation. But when I do that, I get the "Cannot find any bootable device", so a dead end here. I also tried the tips where they say to remove the USB stick when the Windows installation starts, but didn’t help either.
I am installing using a bootable USB drive, I do not have a Superdrive and cannot even lend it or something like that.
I am really desperate, can anyone please help me?
Thanks in advance,
DavidKop_

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

I cannot install windows 8.1 on my Envy touchsmart 15 notebook pc

I cannot install windows 8.1 on my Eny touchsmart 15 notebook pc. My current operating system is win 8. After going throught the setup and about 35% of the drivers load, I get a black screen and the install quits. I have left it on all night and still no installation. I am not sure what to do next. I have all my drivers up to date, have stopped my backup system, unplugged all my external items and stopped my firewall and antivirus.

Wish you luck. You are in good company. None of the HP ENVY series appears to be able to upgrade to Windows 8.1 and no one at HP appears to know why. In additgion, if you have looked lately, you may even find that there are no longer any drivers listed for Windows 8x64 either. Only a place to click to order (and pay for I presume) a Restore DVD. Interesting choice of options considering the TouchSmart Windows 8 x64 models do not even have a DVD player to restore From in the first place.
HP definately dropped the ball on this one a it loks like they are not even going to provide solutions for those of us under Warranty.
Error codes I get are 0xC1900101 and 0x40019
I have read others saying it is a hardware problem but HP refuses to do anything about it

Transparent Windows Forms in Windows Embedded Compact 7

I am looking for a solution to make the background of a Windows Forms in a Windows Embedded Compact 7 device transparent. These approaches have failed:
- override void OnPaintBackground with empty code block
- using the open source project AlphaMobileControls

Sorry, I thought that article had more detail. Now I look at it again it's rather less useful than I thought.
bitblt is copying pixels.
https://msdn.microsoft.com/en-us/library/aa452879.aspx
The way this would have to work ( afaik ) is you copy some proportion of the bits out the rectangle behind your window.
If you want low opacity rather than completely transparent you would merge them with whatever colour you want the background to look a bit like.
You'd be painting a picture onto the background in the onpaint.
If your user moves the "transparent" window then you need to copy the background from the new location.
If it were me I'd push back on the requirement.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

WINDOWS EMBEDDED COMPACT 7

Hi ,
I am having Windows Embedded Compact 7 setup on XP SP3 pc. I need to install a SDIO wifi driver on my Windows CE device. I have tried to install it via cab file and got installed successfully.
The SDIO Wifi driver got loaded but it stopped runnning. It seems the SDIO commands not reaching the WIFI card.
I have also checked the driver by including it into the OS image through Platform registry and bib files. It worked fine.
Is there anything i need to do for the CAB file generation for WEC7 ?
Best Regards,
Dinesh

This forum is for POSReady. Please try one of the Windows CE forums:
http://social.msdn.microsoft.com/Forums/en-US/category/windowsembeddedcompact
-Sean
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

Windows Embedded Compact 2013 Wave 1 Cumulative Update on MSDN

A new Compact 2013 release is available on MSDN that will bring your build environment up to date as per February 2015.
See my Blog:
http://embedded101.com/Blogs/David-Jones/entryid/584/Windows-Embedded-Compact-2013-Wave-1-Cumulative-Update-on-MSDN
David Jones
Embedded MVP, Australia
If this helps you, please give me a vote. Thanks.

Grrr I just that : GetWindowLong/SetWindowLong on GWL_WNDPROC crashes
in Compact 2013
It has been accepted by Microsoft as a bug. We hope to get it fixed. Otherwise you cannot hook on WndProc at all for ARMv7 on Compact 2013.
Windows Embedded Compact 2013 only disappointment over disappointment. I would have been better to stay with Linux.
I need a file explorer, where the file explorer that we had in Windows CE 5 ?

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.

Cannot install windows 7 on brand new mac mini with 256 g sdd? Please help.
Have tried all tricks found on the net and followed every advice from apple support.
Still black screen with blinking curser when mini is rebooting following partitioning via bootcamp.
Very nice and fast mashine, wouldnt like to return it.
thanks allan

Is that an Apple SSD?
what model is it?
Is there a firmware update if non Apple?
Lion is not server version.
Windows is ? ISO or retail?
Google macmini Windows 7 SSD Apple Boot Camp

T430 cannot install Windows 8.1

I cannot install Windows 8.1. I have a T430. I go into the app store, start installing 8.1, it downloads, starts installing, and fails just after that point -- at 54% -- with the error message 0x80070002. That apparently means "File not found", but the Windows Update logs don't point to which file is not found, only giving:
WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
Going into Event Viewer gives the equally cryptic "English ESD Bundle Parent" as a possible cause for the failure.
SFC and chkdsk do not report anything out of the ordinary.
I'm at a loss. Help is very appreciated.
Solved!
Go to Solution.

Run the Fix-It tool in standard mode
Then try again
If still not working try aggressive mode
Try again
http://go.microsoft.com/?linkid=9665683
I have this straight from the Microsoft website!
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Cannot install Windows 8 Consumer Preview on MacBook Air 11" (Late 2010)

Hi, I'm trying to install Windows 8 Consumer Preview on my MacBook Air 11" (Late 2010 model) via Boot Camp assistant. I've hacked the Info.plist of the Boot Camp Assistant to allow it to create a bootable USB installer drive. After successfully creating the USB, the laptop proceeds to reboot itself but it never loads up the Windows installer. However, if I restart it while holding Option, and selecting EFI boot, the installer loads up. However, once it loads, I cannot install Windows 8 Consumer Preview to the Boot Camp partition because of this error: "Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks. Windows cannot be installed to this hard disk space. WIndows must be installed to a partition formatted as NTFS. Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
Can anyone guide me through steps that would hopefully resolve this problem? Thank you in advance

@minxinglee
even i am getting same errors I hope you found out solution by now ! plz... can u share it ! i need it urgently
Thanks in advance

Cannot install windows 8 on Pavilion Elite M9600T (KX745AV-ABA) with Vista 64 BIT

I cannot install windows 8 on my computer. I contacted Microsoft and he worked on it for three hours and said I had a graphics card driver problem.I am using a Nvidia GeForce 9800GT which came with the computer. When I try to update to the latest driver (306.97) Which is on the Microsoft update site and also on the Nvidia site The screen says no signal and goes to sleep. I have been working with a Nvidia rep for a week now and he says it is not their driver that is causing the problem and that I should contact HP. I don't know what else to do. I removed the working Nvidia driver (SP41066) also and Tried to install windows 8 and recieved the same message "Windows installation was not successful" and returned me to Vista 64 Bit. I don't know what else to do. Can someone please help or am I just out of luck. Thank you,
Gene
This question was solved.
View Solution.

You're welcome mrchips108
By the way up for one more go. I was finally able to find someone with a possible solution for you. the user yashoshah on the tomshardware forums had the problem:
"Windows installation was not successful. Your previous version of windows will be restored. Please do not switch off your computer during this time"
SOURCE: Windows installation not successful
He fixed it by removing the HDMI cable and connecting to the monitor through DVI. After it was installed he went back to using HDMI.
How is your video card connected to the monitor: what cable and what interface is on the monitor and what interface are you using on the video card? Perhaps the Microsoft rep you spoke to was partly correct about the video card being the problem. It might be that the driver built into Windows 8 has a problem with certain configurations.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Cannot install windows on bootcamp

I have leopard os with bootcamp and a new windows xp sp2 disk. i cannot install windows on bootcamp. it says that i am missing a component. any tips?

*"any tips?"*
Post your question in the Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

Cannot Install Windows 7 with AHCI mode

Hello,
Having just submitted a support ticket to MSI, I was curious to see if anyone else has experienced a similar issue or may be able to suggest a possible resolution.
I recently purchased a MSI Z87-G41 PC Mate for an htpc build.
I've ran into an issue of not being able to install Windows 7 Ultimate 64 bit onto my ANY SATA 3 hard drive with SATA mode - AHCI enabled in bios.
Main parts for the build are:
Motherboard: MSI Z87-G41 PC Mate
CPU: Intel Core i3-4130 3.4 3 FCLGA 1150
RAM: G.SKILL Ares Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
PSU: Corsair Builder Series CX 600
OS HD: Crucial M500 SSD
During Windows install and selecting the SSD in which to install windows onto..
Windows will prompt with: “Windows cannot be installed to Disk x Partition x. (Show details)
Afterwards, I’ll select ‘Load driver’ and select the “Intel Rapid Storage Technology Driver for 8x series,” provided by MSI drivers download page. Confirmed as a valid driver for the SATA AHCI controller.
"Select the driver to be installed" lists: “Intel(r) 8 Series/C220 Chipset Family SATA AHCI Controller” Looks good, then progress...
Followed by clicking on next- “Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information.”
I've tried installing Windows 7 Ultimate 64 bit via USB drive and OEM disc to no avail.
Performed a test using the same install procedure with my primary desktop computer which uses a MSI z68A-GD65 (G3) motherboard (AHCI enabled.) I was able to install windows to my Crucial M500 SSD without issue.
Confirmed the issue occurs while testing with different hard drives. I have yet to be able to install windows with AHCI enabled on this motherboard.
HDDs tested include:
WD Black WD5002AALX 500GB
Seagate ST3100524AS 1TB
Once I change SATA mode from AHCI to IDE, I was able to install windows without the need of pre-loading the Intel 8 Series SATA/AHCI driver.
Afterwards having installed windows, I decided to test by switching SATA mode back to AHCI. Doing so will cause the machine to bsod upon booting to windows. Later, I performed the registry edit to change IDE to AHCI mode within windows. Followed by again enabling AHCI in bios.
I was able to boot while in AHCI mode temporarily a couple of times until this method stopped working. Any attempt past the bios post, windows will not boot.
I've also tested the manual and XMP profile RAM settings as suggested by the sticky'd thread here https://forum-en.msi.com/index.php?topic=178019.0
I would like to possibly resolve the issue in regards to utilizing AHCI mode for optimal performance for my hard drives and hot swap capability.
When I have more time, I suppose I can run a RAM test; but so far I simply believe it may just be a SATA controller or driver conflict with the motherboard.
tl;dr Cannot install Windows 7 onto any hard drive with AHCI enabled. Works fine with IDE mode.

** Update as of 6/3/2014 ** Issue resolved.
Received my replacement motherboard from RMA. Replacement is working without any issues with SATA mode set to AHCI.
Tested by running Windows 7 and Windows 8 install - both detected my SATA SSD and other HDDs as applicable drives to install Windows onto. Pre-loading the SATA controller drivers was not necessary. Windows boots up immediately without any delay now. Benchmarks are showing valid stats for SATA3 devices.
Also to note, the replacement motherboard came with bios version 1.5, compared the one I sent back which came with 1.6. In case if that had anything to do with it. Not going to risk updating the bios at this point.
Video of issue:
Benchmarks from the old motherboard on the Crucial M500 SSD taken with Crystal DiskMark
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 264.792 MB/s
Sequential Write : 143.991 MB/s
Random Read 512KB : 250.614 MB/s
Random Write 512KB : 142.545 MB/s
Random Read 4KB (QD=1) : 24.176 MB/s [ 5902.3 IOPS]
Random Write 4KB (QD=1) : 82.152 MB/s [ 20056.5 IOPS]
Random Read 4KB (QD=32) : 210.018 MB/s [ 51274.0 IOPS]
Random Write 4KB (QD=32) : 134.663 MB/s [ 32876.6 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:25:19
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750)
on SATA 3 port set to IDE
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 181.472 MB/s
Sequential Write : 141.275 MB/s
Random Read 512KB : 177.430 MB/s
Random Write 512KB : 141.393 MB/s
Random Read 4KB (QD=1) : 21.646 MB/s [ 5284.6 IOPS]
Random Write 4KB (QD=1) : 68.922 MB/s [ 16826.7 IOPS]
Random Read 4KB (QD=32) : 25.411 MB/s [ 6203.9 IOPS]
Random Write 4KB (QD=32) : 108.275 MB/s [ 26434.3 IOPS]
Test : 100 MB [C: 35.4% (39.6/111.8 GB)] (x5)
Date : 2014/05/24 3:41:42
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)
Benchmark from MSI Z87-G41 PC Mate (MS-750) **Replacement from RMA**
on SATA 3 port set to AHCI
CrystalDiskMark 3.0.3 x64 (C) 2007-2013 hiyohiyo
Crystal Dew World
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 469.045 MB/s
Sequential Write : 138.655 MB/s
Random Read 512KB : 419.083 MB/s
Random Write 512KB : 135.032 MB/s
Random Read 4KB (QD=1) : 26.454 MB/s [ 6458.5 IOPS]
Random Write 4KB (QD=1) : 89.189 MB/s [ 21774.7 IOPS]
Random Read 4KB (QD=32) : 252.818 MB/s [ 61723.0 IOPS]
Random Write 4KB (QD=32) : 129.909 MB/s [ 31716.1 IOPS]
Test : 100 MB [C: 37.1% (41.5/111.8 GB)] (x5)
Date : 2013/03/10 10:02:50
OS : Windows 7 Ultimate SP1 [6.1 Build 7601] (x64)

Cannot install Windows Embedded Compact, bad authorization code

Similar Messages

Maybe you are looking for