Cannot install Windows server 2003 SP1

Hi all,do you know something about "Not enough free space" issue when upgrading windows 2003 under bootcamp with Service Pack 1?
I'm going crazy but it seems it is an issue related to "boot camp" or well "on macintosh install".
I get an error message when istalling windows 2003 SP1 and it is :" Space on disk in C:..... not sufficient for Service Pack 1 installation. Installer require 3 megabyte additional space.
C: 17 Gb free
i've tried on external HD 180GB not working...
This check is on Space required for uninstall files....
Any suggestions?
Thanks!

Considering the fact that Boot Camp only supports XP SP2, it comes as no surprise that you're having issues with an OS other than XP.
Either way, your question pertains to Boot Camp, so you should re-post it in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165
Or better yet, the error seems to be with Windows, and completely unrelated to Boot Camp so you should post your question on a Windows discussion board as well.

Similar Messages

Unable export crystal report XI to pdf on window server 2003 SP1

I have a class asp function to export crystal report XI to pdf file, it is workable at winXP but when i copy it to window server 2003, it exported the file with zero length (file size is 0kb).
when i try to open the zero length pdf file, it shows the file is already open or in use by another application.
when i run my export function, i can see there is a new file created at the folder "C:\windows\Temp", when i try to open the tmp file, i get the message "The process cannot access the file because it is being used by another process", i can open the tmp file after i end the process "w3wp.exe network service", the data in the tmp file is exactly what i need to export to the pdf file.
At the window server 2003, I have installed the Crystal Report XI developer edition,
For the web application folder and the pdf export folder, Read, Write and Modify permission has been set for the following accounts:
1. myServer\Administrators
2. myServer\ASPNET
3. myserver\IUSR_myserver
4. myServer\IWAN_myserver
5. Network Service
6. System
7. myServer\Users
I think it is the permission problem, but how to set the right permission at the window server 2003 SP1? please advise. thanks

Hello,
It is a permission issue. When you export Crystal first tries to write the file to the local TEMP folder and then delete it to see if it has read/write permissions. If it fails to delete the file you need to give the TEMP folder on the WEB server permissions for your application. Check Microsofts WEB site on how to set permissions on shared folders for your ASP application.
You may want to search in forums also, this looks familar.
Thank you
Don

SAPSPRINT with window server 2003 SP1

Dear all,
Currently we are using Window server 2003 with no SP(service pack) installed. But to install barcode.dll, we need the SP1 to be installed before we can proceed to install.
I would like to know what is the impact to the sapsprint if we install the window server 2003 SP1?
Regards,
Jerry Chiang

I had confirmed with the SAP consultant and the result show is working fine so far

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to install windows server 2003 on Sunfire x4150?

hi, i'm very new to Sun server.Sorry if i dont know anything about it. But now i have to install Windows Server 2003 on this Sunfire x4150 server. How can i do that? I've try to install but it give me error about the driver.
Some question:
1. Can i install both Sun Os (Solaris?) and Windows Server together? If cant, can i format the Solaris OS and install a fresh Windows?
2. OR actually i should install inside a Virtual Machine?
Here are some links that i found. Am i following the right direction? The article suggest me to download FloppyPack from Sun's website. So, should i just downlaod the FloppyPack (360+KB) ? I dont need to download other driver package?
http://www.seedsofgenius.com/pdf/wp1.pdf
http://dlc.sun.com/pdf/820-5837-10/820-5837-10.pdf
Sorry, i have totally no idea at all.
Thank you very much if you can help me . OTL

Might be a bit late for you, but if this helps anyone else, good.
I had the same issue with an X4600 lately. You need to download the Sun Installation Assistant cd and boot from it to install anything other than Solaris. This cd is similar to the ones that Compaq andDell sendout with their servers. It will do a semi automatic install after you give it the information about the os, set up disks, etc.
Easy to do, search the sun support site for the SIA image particular to your hardware.

I think I may have discovered the solution to installing CFMX7 on Windows Server 2003 SP1

I have not tried to reproduce this method so it may not be a
solution, but it worked for me. After many hours of trying to get
CFMX7 to install on a new server with a fresh install of Windows
Server 2003 with SP1, I stumbled across this and it actually
worked. Using the coldfusion-702-win.exe installer, I right clicked
on the .exe and even though I was logged in as an administrator I
received the option to Run as, so I decided to give it a shot. I
chose the option to run as Current User, but I unchecked the box
'Run this program with restricted access'. After I did this, the
install went through error free.

I have not tried to reproduce this method so it may not be a
solution, but it worked for me. After many hours of trying to get
CFMX7 to install on a new server with a fresh install of Windows
Server 2003 with SP1, I stumbled across this and it actually
worked. Using the coldfusion-702-win.exe installer, I right clicked
on the .exe and even though I was logged in as an administrator I
received the option to Run as, so I decided to give it a shot. I
chose the option to run as Current User, but I unchecked the box
'Run this program with restricted access'. After I did this, the
install went through error free.

Crystal Reports 9 and Windows Server 2003 sp1/sp2

Post Author: jnribeyrol
CA Forum: General
Hello,
due to security updates in my company, we have to upgrade from Windows Server 2003 to sp1 or sp2.
I haven't been able in the support to find out if there was any problem with Report Access Server on these SPs.
Can somebody help me.
regards

CR XI is past it's end of life. You can upgrade to CR XI R2 for free.
Go to: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Typically this is due to DEP, search forums for more info on how to configure it as well as your Anti-virus and/or Firewall may be stopping CR from running. You also need full Admin rights to install all components.
Thank you
Don

JNLP prompted to Save (only) in Windows Server 2003 SP1 over https

In Windows Server 2003 when using https to download the jnlp and jars, IE 6.0 prompts to Save the jnlp file. It does not give the option to open it straight from IE..
The IE settings are:
Do not save encrypted files to disk - off/unchecked
Empty Temp Internet Files when browser is closed - off/unchecked
Using Apache and Tomcat5 with the Mime type set correctly to application/x-java-jnlp-file.
When using http, the jnlp launches web start just fine.
When using https on WinXP and Win2000, the jnlp launches just fine.
It seems to be a Win2003Svr/IE security check that will not allow the jnlp to be launched directly.
There have been a few mentions of this on the web, but no solutions have been posted that I could find.
I am using jre 1.4.2_06. I tried 1.4.2_08 because that WebStart security bug was fixed, but the same issue was occurring. It seems like IE is doing it.
It doesn't get to WebStart until after saving the file and then double clicking it.
I have tried most of the IE settings to see if they helped, but to no avail...

Hello.
I'm glad someone brought this problem up.
We have about 1000 external customers using webstart for approx. 3 years with runtimes
varying from 1.4.1_XX to 1.5.0_XX. We have the same problem with some customers being prompted by a dialog and what to do with the JNLP file. When these customers try a testing link to a webstart app over HTTP they are not prompted. Only when using our business app. over HTTPS and with Internet Explorer. This behavior does not occur only in Win server 2003 but in several
OS from Windows 2000 , XP Home/Pro SP1 SP2 , Citrix Metframe ..you name it. We have known this for years now and not being able to do something about it since we can't reproduce it. All I know for sure is that IE is behind it all and it's not surprising since it is a part of the OS. When using other browsers like Mozilla or FireFox, it works fine.
The customers are now forced to save the JNLP file and launch the app that way. Not acceptable
Is there some registry change that someone knows of to correct this problem.
Regards
Johan

Ucs blade iscsi boot cannot install windows server

Hi all,
i have some problem when i try to install windows server 2008 in nexenta storage using iSCSI via ucs b-series, but its working fine when i install ESXi 5.5. i cannot find drive on windows server installation, and in ESXi i can see all LUN what im create before in nexenta storage and working when i install it.
this vnic iSCSI Configuration:
vnic_id: 13
          link_state: Up
       Initiator Cfg:
     initiator_state: ISCSI_INITIATOR_READY
initiator_error_code: ISCSI_BOOT_NIC_NO_ERROR
                vlan: 0
         dhcp status: false
                 IQN: test:iqn.2014-11.com.:8
             IP Addr: 192.168.1.59
         Subnet Mask: 255.255.255.0
             Gateway: 192.168.1.5
          Target Cfg:
          Target Idx: 0
               State: ISCSI_TARGET_READY
          Prev State: ISCSI_TARGET_DISABLED
        Target Error: ISCSI_TARGET_NO_ERROR
                 IQN: iqn.2010-08.org.illumos:02:windowsboot
             IP Addr: 192.168.1.49
                Port: 3260
            Boot Lun: 6
          Ping Stats: Success (986.646ms)
        Session Info:
          session_id: 0
         host_number: 0
          bus_number: 0
           target_id: 0
does anyone can help me to solve this issue?
thanks in advance - fadli

enic / fnic driver have to be installed; they are not part of any Windows OS.
they can be found in
Downloads Home
Products
Servers - Unified Computing
UCS B-Series Blade Server Software
Unified Computing System (UCS) Drivers-2.2(3)
ISO image of UCS-related drivers
ucs-bxxx-drivers.2.2.3.iso
depending on the UCS version.

Cannot install Windows Server 2012 R2

Hi
I've been able to install Windows Server 2012 standard on a VMWare ESXi 5.1 host.
I've noticed our license was a Windows Server 2012 R2 standard, so I went on eOpen and download the appropriate software.
Now when I try to install it, I get a Windows Boot Manager error
Fiile: \windows\system32\boot\winload.exe
Status: 0xc0000001
Info: The application or operating system couldn't de loaded because a required file is missing or contains errors
Printscreen:
Any help is appreciated. Thanks,
Martin

ok I'm downloading 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9.ISO
Will give it a try and post back the result here.
Martin

X4200 windows server 2003 sp1 install

Hello,
i'm trying to install a x4200 using windows 2003 sp1.
Created the F6 floppy using the make floppy utility found on the drivers cd.
during install, after the hardware config has been inspected, i see the f6 screen, hit f6 and finaly enter the additionail scsi drivers section.
Press S to insert specific drivers, choose the 32bit option as per manual, enter, then it asks for the "lsi logic fusion-mpt sas storport driver disk".
Where can i find that disk?
Or can i make the disk myself, but what files need to be on it?

found similar problem:
http://forum.sun.com/jive/thread.jspa?threadID=94541
I think my usb floppy works because i can load the first driver?

Cannot install Windows Exchange 2013 SP1 64x non-checked build

Hello every one.
I have a problem to setup a lab asigment for school.
I have 2 Windows 2012 standard server
1e AD, DNS, IIS
2e Exchange 2013 SP1 64x
i prepared AD and installed al the features needed for AD and the Exchange server.
But when i run the readines check before i install Exchange 2013 i get to following warning
Warning:
A checked build of the operating system is installed. This can cause system instability issues including crashes, hangs, and other performance problems. It's highly recommended
that the operating system be reinstalled with a non-checked build.
For more information, visit: http:// technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.OSCheckedBuild.aspx
I cant find out what to do, thear is no Boot.ini file in Windows server 2012, any one any idea's to solve this problem
Thanks for the help,
Greatings,

Hi,
Agree with Ed. A checked build Windows is used for debug. Before installing Exchange 2013, please make sure that you use a free build. I'm afraid that you need to reinstall the OS.
What's more, you can refer the following screenshot to determine which Windows build is running. Generally, it should be Free build.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Cannot install Windows Server 2012 R2 Standard on a Supermicro X9SRA

I have bought the Windows Server 2012 R2 Standard OEI and it will not install on the brand new Supermicro X9SRA motherboard. I have tried to install the previous version (Windows Server 2012 Standard) and it installs fine with no problems.
I need to install R2 in order to use the Essentials role. I have also tried to install the trial version of 2012 R2. which I downloaded from the microsoft website and got the same result. The installation goes into a loop. The circle bellow the Windows logo
goes on forever and nothing happens. I can not even get to choose the language. The loop happens as the disk starts.
Can anyone please help?

Does SuperMicro support the installation of Windows Server onto that MB? I do not find any reference to X9SRA at
www.windowsservercatalog.com, which is where hardware vendor post the systems on which they will support the various versions of the Windows Server operating system. I see lots of SuperMicro solutions,
but none of them appear to list the X9SRA MB. You need to contact SuperMicro to determine if they support it.
. : | : . : | : . tim

Can't start reports server on Windows Server 2003 SP1 Error code 13

Hi,
This morning I figured how to start the rwserver using the command, rwserver server = repsrv. This works using XP pro physical machine but now I am trying to perform the same task on a Windows 2003 virtual machine.
I have used the line:
rwserver -install repsrv.
To add repserv to the list of available services in computer management. This has appeared as an avaiable service and so I click to start it, unfortunately every time I do I get the error message:
"Windows could not start the OracleOraAppServer10g_home1Reports [repsrv] on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 133."
I am assuming this is a security issue with Windows 2003 but I can't find a cure anywhere.
Thanks in advance for any help that anybody is able to provide
Cheers
Daniel

Hello,
Step 1) Check that you can start the reports server from a "DOS Window" :
rwserver server=repserver
Step 2) Check the PATH set for rwserver.exe when it is running as a service
Some sysinternals utilities like Process Explorer / filemon may help :
http://www.sysinternals.com/
Regards

Cannot install Exchange Server 2013 SP1 on Server 2012

It was quite a challenge to clear the errors generated by a stock Windows 2012 install (I think that Exchange installer should install prerequisites for me, not provide cryptic error messages). Once they were cleared however the actual install fails with
this error:
Error:The following error was generated when "$error.Clear(); Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true) { Install-AuthCertificate -DomainController $RoleDomainController } " was run: "Could not grant Network Service access to the certificate with thumbprint 3EF254C303E213FA3673CCF9B134BEC43D6C5E0F because a cryptographic exception was thrown.".
I could work on it, but first I now need to remove the partial install. Any attempts I've tried have all ended with the above error as well. How can I clean up the failed install so I can try again?

Why not start fresh with Windows 2012 R2?
The pre-reqs:
Install-WindowsFeature RSAT-ADDSInstall-WindowsFeature AS-HTTP-Activation, Desktop-Experience, NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation
and the Unified Communications Managed API 4.0 Runtime definitely needs to be installed first:
http://www.microsoft.com/en-au/download/details.aspx?id=34992
You should use the Deployment Assistant to save yourself some headaches:
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AABEAgIAQAAIAUEHAQAAAAg~

Cannot install Windows server 2003 SP1

Similar Messages

Maybe you are looking for