Cannot install WXP on Satellite Pro A300

Hey guys,
I was hoping I could find some help on these forums. I hope I have posted this in the right place.
A while ago, Windows Vista went crazy on one of my laptops, and I wanted to install XP. (No, you cannot laugh at me). I have the XP Pro SP3 disc.
Although, even the recovery agent that Toshiba has on all of its laptops/computers could not fix these issues I had. I put the XP Pro Sp3 disc into the MAT****A DVD-RAM UJ880AS drive, hoping to use the formating tool on that so it would let me install XP as Microsoft/Windows made it impossible to revert. Anyway, the formatting went all well, and then the installation just came up with billions of errors.
I currently have a Ubuntu Live CD running on it, to make it actually DO something, and its working fine. But i really badly want XP on it.
I think the issue could be BAD SECTORS on the HDD.
I need help, and input.
Do I buy a new HDD and hope the install works? Do I buy a whole new laptop?
Your help is appreciated like you wouldnt believe. This has been driving me nuts for ages.
Brock

Hello.
1) Check if your compact disc has no scratches.
2) Make sure that the lens of the DVD drive is clean (dust free). If not perform a cleaning operation by using cotton wool stick and alcohol (make it very accurate and avoid making any micro scratches).
3) Backup all your data from all partitions. Then start a clean installation of Windows XP. In the setup remove all your existing partitions (make sure that after that you have ONLY unpartitioned space) then create new partitions of preferred size. Format those partitions in NTFS (Quick) mode. Finally, install the system onto partition C.
That's it.
Good Luck to You, and keep posting your progress.
Regards,
Osman.

Similar Messages

Re: Cannot find drivers for Satellite Pro A300-1HE (PSAGDE)

Hello,
I have a Toshiba Satellite Pro A300-1HE (PSAGDE-00800QFR) with the serial number 78621314Q, but i find it anywhere on the toshiba site.
I'am looking for drivers for the graphic card ATI, it has an ATI Mobility Radeon HD3650.
Where can-i find drivers for this machine ?
Thanks by advance

Hi
Go to Toshiba EU driver page
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU
_Choose:_
Notebook
Satellite Pro
Satellite Pro A
Satellite Pro A300
PSAGDE
Thats all.

Cannot install WinXP on Satellite Pro A200 - No HDD

Hi,
Please can someone help me. I've just brought 52 Satellite Pro A200 laptops. They come with Vista pre-installed, but I want to wipe them and install Windows XP. However I have a big problem - when I put my XP CD in and boot from it and click Enter to continue, it tells me that the Installation cannot continue as Windows found no hard drives (although I can boot in Vista so I know the HDD are ok).
Thanks for looking,
Matt Courtman
Cromwell Community College, UK

I too had the HDD problem. Its because there are no drivers on the XP CD for SATA hard drives. What you have to do is use some free software called NLite and merge the SATA drivers with the files off the XP CD. (It really is ace). Available at
http://www.softpedia.com/get/System/OS-Enhancements/nLite.shtml
Read this page it tells you exactly how to do it.(
http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml). If I can manage it then anyone can. Using the NLite software you copy the contents of your XP CD to your hard drive. Then you download the SATA drivers (available from the tosh site), then you integrate the drivers with your XP CD files. Finally you create an ISO image and burn it to CD. When you then boot off your new CD and install XP, it detects the SATA drive. Hey Presto!!!

Cannot install windows on Satellite Pro A40

Hi I have read through all the posts and cant seem to find an answer.
My problems is this ..
I have tried to install windows from a Full version and when I choose to install windows in a partition it fails. If I try to delete the partition it fails. If I use the recovery disks - Option 1 fails before it fully loads - looks like Gdisk? error and then goes in ghost. Option 2 Loads but when I go to install fails again.
I cannot find an option in the bios to prevent accessing the disk - like a boot virus protection. the lock key under the keyboard I have tried in both positions.
I have removed the battery to see if it is a power problem !
Tried using the recovery options in win xp - but cannot access the drive
The really strange thing is during the recovery disks option 2 - the drive size is bigger than the actual size by approx 1/3 ?
The system originally went down whilst connected to the internet - the only option I can thing of is a surge came down the line and damaged either the motherboard or the hardrive. As it has happened to a Desktop system - Blew 3 modems and an ups before we located the problem.
HELP!!

Hi,
did you already tried to check and format the drive with an external tool? I give you a suggestion: try the "ultimate boot cd" which has many tools also some tools for maintaining harddrives.
You can get the image here: http://www.ultimatebootcd.com/
Just burn it to a CD, boot it and choose the tool for your harddisk to check it and to repartition it.
Hope it helps...
Greets

Satellite Pro A300 PSAGDA: Problems installing webcam on Win 7

Hi there guys,
its been a few weeks since installing Windows 7, only for the last few days have i actually bothered to install toshiba software (dont stone me!).
Right now I've been scratching my head when installing the webcam drivers. When the install is done and after a reset, all it says is Webcam failed to initialize, please restart cam or computer.
Restarting the laptop wont do anything
I am using a Toshiba Satellite pro A300 PSAGDA-01C00R, do these drivers simply not work for the time being on 7?
any help would be great, thanks!

Hello
I have installed THIS version of webcam driver on my Win7 preinstalled Satellite A300 and it works perfectly.
I have tested preinstalled software and it runs well. I have also tested it with Skype. No problems at all.
Test it on your Satellite too.

Satellite Pro A300-1E7 - cannot start cam software

I have purchased the Satellite Pro A300-1E7.
Webcam is not functioning properly in MSN messenger video call.
Am having similar problems to the previous posting except I am using Zonealarm.
I think Zonealarm challenged cec_main.exe in a similar way.
I have tried to follow the instructions on here but without much success.
I removed Camera Assistant SOftware and re-installed the driver but doesnt appear to have improved things.
Now c:\program files\ camera assistant software for Toshiba has disappeared altogether and the the camera assistant panel no longer appears on the side of the desktop.
Any ideas please?

Hi
I used the Zonealarm is the past and I was not really satisfied because this software locked everything and most applications didnt work properly even after new configuration! Finally I removed this software and I noticed further advantage; my notebook boots much faster!!
I think this software would lock the cam software too.
> Now c:\program files\ camera assistant software for Toshiba has disappeared altogether and the camera assistant panel no longer appears on the side of the desktop.
This would mean that the software was removed and was not installed properly.
But to be sure, check in control panel -> Software (add & remove programs) if the webcam software is installed.
Ive got the internal Chicony cam too and its working fine in connection with Skype software. I didnt test MSN but I dont see any serious reasons why it shouldnt work.
In my opinion you should firstly remove the zonealarm. Then clean the OS using CCleaner. Finally download the webcam software again and reinstall it!
The webcam toolbar is not always visible on desktop.
It would appear only if you move the mouse cursor to the place where the webcam toolbar was hidden.

Satellite Pro A300 PSAGDE re-booting when plugged in

I have had this laptop put away for a while as I couldn't work through this problem, but I'm having another try.
The laptop is a Satellite Pro A300 PSAGDE.
The problem I am haiving is that the laptop would re-boot whenever I connect the PSU, but not when using a live CD (Ubuntu).
I would like to try and flash a replacement BIOS to see if that will solve the problem.
Unfortunately the software needed to flash the BIOS requires the laptop to be plugged in.
Is there any way around this problem?
Can I fool the software into thinking it is plugged in?
Is there a way I can revert/repair the BIOS in any other way as obviously the problem hasn't always been there.
Thanks
Message was edited by: miainphillips
Message was edited by: miainphillips

So once again: notebook runs fine using battery power but reboot always (in the loop????) when AC adaptor is connected. But using Live CD the notebook runs ok even if the AC adaptor is connected.
Right???
>> I think it may be a BIOS issue because the laptop will run without an issue when booting a live cd, even when it is plugged in.
If the unit runs ok using Live CD, then this means that this cannot be BIOS issue because BIOS does not depend on installed system.
Therefore in my opinion its definitely not a BIOS problem.
I think you should firstly disable the automatic reboot when an system crashes Win 7 is configured to restart immediately when a BSOD happens and this happens too fast to see the error I think you mean this by automatic reboot
Disable this by following way:
1)Control Panel -> System & Security -> System -> click the Advanced system settings
2)Locate the Startup and Recovery section near the bottom of the window and click Settings button.
3)In the Startup and Recovery window, uncheck the check box next to Automatically restart.
4)Now click OK and restart the unit
In my opinion the system crashed and therefore the notebook reboots

Satellite Pro A300-1DZ does not find HDD after BIOS update

Hi everyone,
I have recently purchased a secondhand Satellite Pro A300 1DZ.
Put a fresh copy of Windows xp home on it.
I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
OH DEAR what a big mistake.
Now the netbook will NOT start windows.
So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
Could someone please tell me how to fix this? Thank you x

Hi
I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
This is because of the SATA controller.
You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
So, youve got two options if you want to install Win XP:
AHCI mode -> but you have to include SATA drivers
Compatible mode -> Win XP installation possible without the SATA drivers

Satellite Pro A300-2CW - Need Recovery disks with Windows XP

I have a Toshiba Satellite Pro A300 2CW. I bought it with Software Windows XP (included in a CD), which worked perfectly for years. I have reinstalled it several times during this years, but now the CD has deteriorated and it doesn't work anymore.
Originally the machine had WIndows Vista installed with DVD recovery creation option and a HDD recovery option, but I think this is not possible for Windows XP.
Do I have any options?Where could I buy the original Windows XP CD?
Thank you

Hi
You can try to order it on https://backupmedia.toshiba.eu/landing.aspx
Other way you can install own WXP version. All WXP drivers, tools ad utilities can be downloaded from Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Satellite Pro A300-1GT - Error message when starting webcam

I have a Toshiba Satellite Pro A300-1GT. The problem is that the camera does not work. When I start software it writes that I should restart camera or computer. I'm having Windows 7 and I serched the internet for solutions but I find just a discusions with the same problem without solutions.
Sory for may bad English.

Hi
The cam is not listed in device manager; neither as unknown device nor as USB device?
Well, I read here in the forum that internal webcam is connected to the USB controller on the motherboard and sometimes the connection is loose and therefore the cam cannot be recognized by system.
I think in such case the notebook needs to be disassembled and the connection should be checked. But this seems to be a job for technicians

Satellite Pro A300 - I get the "Windows search" if I left click any folder

I have just purchased a Satellite Pro A300 and downgraded it to Windows XP SP3.
When I left-click any folder icon on my hard drive I get the 'Windows Search' window displayed instead of opening the folder. When I right-click any folder icon, the first item in the menu (bolded) is 'Search'.
How can I change the order of these menu items so as 'Open' is the first item?
Can I remove (Control Panel-Add or Remove Programs) the Windows Search facility without affecting any software I have loaded?
Is having the Windows Search facility installed the likely cause of my problem?
Thanks,
Murray

Have just solved my own problem:
1. The order of items in the shortcut menu for Folders can be changed by updating the actions for specified file types in the Folder Options Menu. Select +Folder Options+ from the +Tools+ menu of any folder, select +File Types+ and scroll down to *Folder*. Click *Advanced* then click *New* and add *Open* with *Explorer* as the program to use. Click *OK* and *Close* and bingo! Appears the order of the short-cut menu in XP is Open before search, but in XP Pro is Search followed by Open/Explore.
2. The Windows Search utility can be safely removed despite the warning issued - the Microsoft website indicates the warning is simply a generic warning and it is highly unlikely that removal will affect any software installed since the Search utility was loaded.
3. The Windows Search utility was NOT the cause of this problem.
Trust this might save others the hours of research I had to do to find this solution ...

Satellite Pro A300 - FN Key not working with xp downgrade

I have just purchased a Toshiba Satellite Pro A300 and downgraded the o/s to XP.
There is a problem with the FN key on the keyboard, it does not function. I dont know if this has something to do with the xp downgrade?
Any ideas please?

If you have downgraded to Windows XP with the Microsoft disk you must install the Toshiba utilities and Hotkey Utility.
This is necessary for the FN keys in Windows XP so check the Toshiba website for these utilities:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers

Satellite Pro A300-1A8 Vista system restore not working

I wanted to use system restore due to attempting to reconfigure administrator rights, its somehow deleted all my shortcuts on my menu and messed about with a few things.
However when i try to use system restore (i have attempted to use it in safe mode, via cmd promp, both together and normal boot), yet all seem to stay hanging in the same green page where it reads something along the lines of 'system is initialising restore etc' (spending 45 mins on this page before i get fed up and shut down the computer). I have tried using different restore points but the same occurs. It like its not working at all.
Can anyone help with this please?
My laptop is a Satellite Pro A300-1A8.

Hi
You mean the Vista tool which can be found in (Start button -> All Programs -> Accessories -> System Tools -> System Restore) does not work and you cannot set back the Vista to the early time point?
Well, usually there is no much to do to restore the OS to the early time point you have to star the system restore tool and have to choose the restore point. Then everything should run automatically.
If this doesnt work then something is messed up as you said in your posting above somehow deleted all your shortcuts on my menu and messed about with a few things possibly the OS has been messed to.
Try to clean the OS using the free software for example CCLeaner. I use it too. Its great. Repair and clean the OS and check if its possible to use the system restore tool again.
I found also this MS page:
[System Restore: frequently asked questions|http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

Satellite Pro A300-1H2 - Windows does not recognise HDD

Hi,
i'm a newbie, this has probably bin asked before so if it has you'l have to excuse me, i have a satellite pro A300-1h2.
I got the blue screen unmountable boot volume, so have tried to fit a new samsung drive. I put in my windows disc it loads all the drivers then says there is no hard disc?
In bios it recognises it ???
Thanks if anyone can help

Hi
The problem is that your notebook supports the HDD SATA controller but the OS system does not contain the SATA drivers
You could set in BIOS the SATA mode to compatible.
This will allows you to install the OS without the installation of SATA drivers.
Greets

Satellite Pro A300 - WiFi is 50% slower on XP than on Vista

I noticed that WiFi transfer is slower on Windows XP Pro than with original Vista installed on the same machine.
I tested the issue on Toshiba Satellite Pro A300-1NT - is it possible or my Toshiba is not working propely?

I dont feel I have already checked - btw I have got 2 same models of A300-1NT
the one with XP recovered and second one with Vista onboard - the speed I have checked on different speedtesting websites (like speedtest.pl or dsl.cz) and I can feel the difference downloading te same things as well.
After recovering XP from original CD with SP3 installed or without SP3 the result was clear - 50%.
The system is clean with no additional band - consuming activities.
I have checked RJ Ethernet connection and there was no such issue.
i upgraded Wlan directly from intel website with noo results.
I use 802.11g standard with more aggresive settings than default.

Cannot install WXP on Satellite Pro A300

Similar Messages

Maybe you are looking for