Cannot install xCode 4.1.1 on MacBook Pro - OS X version 10.9

I have downloaded xCode version 4.1.1 from the Dev Centre. However, while installing it I get this error:
"Xcode can’t be installed on because the version of OS X is too new."
How to fix this?
I need to run this exact version of xCode for university.

You need to download XCode 5 for use with Mavericks.

Similar Messages

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

saturnotaku wrote:
Csound1 wrote:
Windows XP is not supported, install Windows 7 or 8.
Reading the entire post is your friend:
I have tried to do the same thing using a Windows 7 disc with the same results.
Perhaps you could offer a suggestion then.

I cannot install OS X Lion on my MacBook Pro. Installing time is in negative hours. (-2,147,483,648 hours)

At first, my macbook couldn't start up. It only displayed apple logo with a spinning wheel on grey screen for hours and hours. Then I decided to reinstall the OS. I tried so many times to install but the installing time said thousands of hours remaining to complete . I left the computer for days but it didn't install OS. I tried that connecting the Ethernet cable as well but it didn't work. Then I took out all my important files by connecting it to another macbook and formatted the hard drive. Then tried to install OS again. But still didn't work. I checked on you tube and changed the hard drive cable as well. Still didn't work. I cannot install OS X Lion on my MacBook Pro. Installing time is in negative hours. (-2,147,483,648 hours). Seriously looking for help.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Cannot install GoLive 8.01 0n new MacBook Pro/Snow leopard

Purchased a brand new MacBook Pro (with the new Snow leopard) so I could leave my house and still work.
The most important application I use is Adobe golive CS2 8.01.
I have the 6.0 disk, and the upgrade registration number but they will not install in the MacBook Pro/Snowleaopard. I've tried 50 times. It will allow an install of the 6.0, but says my registration number is invalid for the upgrade.
Adobe doesn't support the product anymore on any level. I'm beside myself. The laptop is worthless to me without that application.
I've tried replacing the keylogin, prefs reinstalls etc... nothing.
I'm desperate. If anyone has any ideas, please help.
g
Regards,
George Edgar Joyce III
JoyceMedia

George Edgar Joyce III wrote:
hang on a second...
GL CS2 and ( both work on snow leopard. Matter of fact Adobe LiveMotion works on Snow leopard! Howe3ver, you cannot open your se\aved documents... still working on this too....
but, GL works great with SL....on my desktop, golive was already installed when I upgraded to snow leaopard... works great...
I doing a clean install on the laptop..that's where I'm stuck...
wonder is you upgrade with GL INSTALLED ON YOUR LAPTOP...IT SHOULD STILL WORK...
let me know if you try it..
i'm thinking of downgrading the OS on the laptop, install GL and then upgrade back to SL... too much freakin work!
g
Downgrading, install GL, then upgrade sounds like a good move. Let me know if it works... if you do it. I understand the frustration of having to go to all this trouble. I've had my share of problems lately. First my MBP hard drive went bad. Had to reinstall everything. Then I took it on a trip so I could keep up with client work, and it died again. Took it to Apple in Portland, Maine. They had to ship it off for repairs again. This time the Logic Board and Video Display. Now my G5 is acting up again. Often too busy to deal with it.
I'll follow along to see how things go for you. Keep us posted if you would.

Cannot install Mac OSX Snow Leopard on Macbook Pro Unibody with a new SSD

Hi, I just bought a SSD (OCZ Vertex LE 120GB) to replace the stock SATA HDD. The problem is that the Mac OSX installation fails. I tried a lot of times with no success. Both clean install from DVD or restoration from a Time Machine backup fails.
The problem doesn't happen if I put the same SSD into a PC to install a Linux or Windows. I've read something saying the problem to be at EFI 1.7, SATA bus and even SATA cable in the Macbook Pro. Can anyone help in this issue?

IgorOzz wrote:
Hi OrangeMarlin, thanks for answering and trying to help me in this issue. Well, The SDD is well formated by Disk Utility and GUID partition as well. I tried to clone my HDD to the SDD by using the Disk Utility RESTORE option. By doing this I could boot up from SDD but somethings didn't work well (iPhone crashed at every start), Finder sometimes, and other apps...
Maybe the disk utility restore option isn't the best way to do that. I'm gonna try the following steps:
- Carbon Copy to clone my HDD to SDD;
- Update SDD FW to the last one (but I need to install it on a Windows machine first);
- Downgrade EFI FW back to 1.6 (not sure if I'll proceed to this step).
I was thinking about SATA bus and cables because I've read some issues pinpointing to this as the culprit, since the Macbook's SATA wouldn't be able to handle 3Gbps SATA II speeds.
Now, a little question: Why you say to be not recommended to install the new drive internally? What if, after using the SSD or HDD for a while and the system crashes I need to reinstall Mac OSX? I think it's supposed to be installed from the scratch by the DVD installer. Isn't it?
Again, thanks... and waiting more replies...
Do one step at a time, and I highly recommend not "downgrading" the EFI. The unintended consequences might make you throw your MBP out the window.
Yes, use Carbon Copy Clone. Then try to boot from the cloned drive. Hold Option at startup, and it will give you a choice.
If it works, then put it in your MBP. If it doesn't boot, then go to step two, repeat clone, and try again.
My 2010 MBP runs at 3Gbps. I think prior to the 2010 models, Apple had not qualified any drives, other than the ones they put in the MBP's, that could work with 3Gbps drives. You may have one that doesn't.

I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

I installed my new iMac with my Macbook Pro 2008 back up. I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet. any ideas on why or what to do about it.

Hello 1BillyMac,
It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
OS X Yosemite: Add a network location
A network location is a group of network settings
A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings.
For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort.
Choose Apple menu > System Preferences, then click Network.
Click the Location pop-up menu, choose Edit Locations, then click Add .
Enter a name for the location, then click Done.
Enter settings for each network connection service you want to use in that location.
After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Can't install SMC Firmware Update for my MacBook Pro 15" early 2011

Check your Network control panel and turn off Auto-Proxy setting.
This is one of the top #4 "how can they do this' pet-peeve errors.
The other is the often slow 8 hrs to download 600MB even on 10Mb+ cable.
Another, 'the drive cannot be partitioned because there isn't enough contiguous unfragemented free space; some files are locked and cannot be moved."
If auto proxy isn't it, router/modem and DNS settings.

Problem with installing Flash player 14 in my Macbook Pro

I tried to install Flash player 14 in my Macbook Pro, however, it stuck at "retrieving install" screen, it is supposed to be a new version, anybody has the same problem?

Yes same issue. I even tried chatting with adobe support but they did not help as I am not a paid subscriber. I have seen many others with the same issue. I hope adobe is aware of this. am trying to contact them.

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

How do i install adobe flash player on my macbook pro?

i've recently purchased a macbook pro (the latest version). and i went on youtube to watch a video. then after that it asked me to install adobe flash player- i followed the link then waited 10 minutes for it to install. then i went on youtube again, just to be able to watch that video and now its not working so i installed it again. i have no idea why its not working. what do i do??? how do i do it? why isnt it working?

sig, i've done that but i need to find it- ive installed it and now i cant actually watch vids on youtube. i know im not the only one who has had this problem and i have alredy been directed to that website. ive actually installed it from that website like twice- i appreciate it sand thanks for the help but i've nt managed to fix it ....

Cannot install sofware for HP Office jet 8625 Pro on my Dell Inspiron 15 with windows vista?

Cannot
install
software for HP Office jet 8625 Pro software on my Dell Inspiron Core 2 processor with Windows Vista?

Hi @akcarl
What happens when you try to install? Does it freeze, do you get an error message, or perhaps you simply can not find the appropriate software to download?
Please post back with some additional detail so I can better assist you. Thanks.
In the meantime, if the issue is nothing but finding the software, you may use the following link; OJ8620_198.exe
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How Do I Install Windows 7 to Early 2013 Macbook Pro?

I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release?
If So, How do I do this?
Can it be done to an extrernal 1TB Hard Drive that I can plug in and use only as needed?
Will I be able to install Microsoft Office 2010 to only the Windows SIde?
How do I do this?
Thanks Ahead of time.

Limbic_Pastry wrote:
I need to own a windows pc or at least have windows 7 environment to work in for some college courses. I own Windows 7 Pro. Is there a way for me to install this onto my current my Macbook Pro Retina Early 2013 Release? ...
While it's possible to run Windows 7 or the Mac OS using Bootcamp, you can run Windows 7 and the Mac OS at the same time by creating a virtual machine (VM) using VMware Fusion, Parallels, or Virtual Box. One advantage of a virtual machine is that you can put the VM file on an external drive so that the VM file size isn't limited to available space on your internal. Another is that you can back up that file and/or create snapshots of the state of Windows at any point in time and revert to that state in seconds if something (e.g., a virus infection) goes terribly wrong. I have such a setup running in a rMBP early 2013 myself and it's very fast.

How do I install Mavis Beacon Deluxe 20 on macbook pro? I had MB (20) on my last macbook pro.

How do I install Mavis Beacon Deluxe 20 on macbook pro? I had MB (20) on my last macbook pro.

This is off the Broderbund website, and applies to the most current version. It looks like they only support through 10.8.
MINIMUM SYSTEM REQUIREMENTS:
Windows® XP, Windows Vista®, Windows® 7, Windows® 8¹, Pentium® or AMD Athlon™ Processor, 512MB RAM (1 GB RAM for Windows Vista®, Windows® 7, and Windows®8), 600MB of free hard disk space, Video Card & Sound Card, DVD-ROM, keyboard & mouse, and speakers or headphones. Mac® OS X 10.6 – 10.8¹, Intel® Core™ Processor, 512MB RAM, 600MB free hard disk space, Video Card & Sound Card, DVD-ROM, keyboard & mouse, and speakers or headphones. ¹Administrator privileges are required to properly install the program on Windows® XP, Windows Vista®, Windows® 7, Windows® 8, and Mac® OS X. *Minimum full display after automatic re-configuration is 800x600, but the program can operate on a Netbook device with a 1028x540 resolution. *High quality audio system or head set is recommended.

Can't install windondows 8.1 on my macbook pro - format issue

Can't install windondows 8.1 on my macbook pro - format issue
Running latest version of Mavericks.
Followed the exact bootcamp proceduce.
Have official window 8.1 version on cd.
All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
I have two questions:
1/ How to start my mac again in normal mavericks mode?
2/ How can I overcome the windows installation issue?
Tried already a lot of hints found on the internet.

First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

I have iWork 09 with a family license. I am unable to install the software on my new Macbook Pro (the message is simply "Installation failed"). I wonder if I need to remove an old computer from the family license, and if so, how?

Yes, gladly. I am trying to install on a 13" MacBook Pro with OS X 10.8.3. I insert the disk into the SuperDrive. The I work '09 window pops up with two icons: one Tim install and one that says "Read before you install iWork." I double-click on the "Install iWork '09" icon, and a window appears that says, "This package will run a program to determine if the software can be installed." I click "continue" and see "Welcome to the iWork '09 installer." I click on "Continue." The "read me" bullet on the left lights up, and I see "Read before you install. . . ." I click "Continue," then see the software license agreement. When I click on "Continue" again, I am asked to agree, and I do. The window then says, "Standard Install on 'Mackintosh HD" and indicates how much space the program will take.
I click "Install," enter my password, and the installation begins. It goes through a validating phase and begins "writing files." It indicates that installation will take about 30 minutes (although that number fluctuates). After about four minutes it goes to "cleaning up." Then after just a few seconds, the "Summary" bullet on the left lights up and this message appears: "There were errors with the installation. You may want to try installing again." There is a large yellow triangle with an exclamation point in it, and a bold "The installation failed." Below that appears "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
At that point, a "Close" button is pulsating blue at the bottom of the window.
Sorry for the tedious detail. Anything revealing there?
Thanks!

Cannot install xCode 4.1.1 on MacBook Pro - OS X version 10.9

Similar Messages

Maybe you are looking for