Cannot install zen pla

Hello,please help me,I cannot install Zen Vision M 30G player,the cd software goes ok but when I connect the device into the usb port the "found new hardware" message came up, then the wizard screen came up and ask me to insert the cd,then the search start but after a few seconds this message came up: "cannot install this hardware, there is a problem installing this hardware: MTP device, and error ocurred during the installation of the device,the system cannot find the file specified."I have look into Device Manager but the player is there with a yellow mark, then I try to update the driver but nothing happen, then uninstalled and installed again but still doesnt work, any ideas? I am running Windows XP, SP2, Optima computer, Pentium III

OK didn't work. Still getting the same error.

Similar Messages

Cannot install ZEN V -- Setup.exe has stopped working -- CTCABEX.

I cannot install Creative Software for Zen V. Just before the installation finishes, I get the message: "setup.exe has stopped working. A problem with caused the program to stop working correctly. Windows will close the file and notify you if a solution is available."
I also get the following message: CTX Installer-Install Shield Wizard that file CTCABEX.dll not found.
Any ideas on how I can load the creative Zen V software>
Thanks,

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

Nomad Jukebox Zen Xtra - cannot install firmware - PC says device "not connected&qu

Hi everyone,?Below is a message I've just sent to Customer Support, but I thought I'd also post it here in case anyone has any words of wisdom. Thanks in advance for your help. -- - Dear Madam or Sir,?Yesterday, I tried to connect my Zen Xtra to my PC to transfer some songs from Windows Media Player . WMP produced an error message stating that my PC had a driver for my Zen Xtra which is not supported by WMP. [This was the first time I had tried to Sync my Zen Xtra with WMP.]?I visited www.creative.com and tried to install the latest firmware for my Zen Xtra. The installation of the firmware froze and remained frozen for over an hour. Now the only thing that my Zen Xtra displays is Rescue Mode v.3. I cannot install any firmware at the moment, because the installation wizard keeps stating that my Zen Xtra is not connected to my PC. However, it IS connected and Windows XP detects it up as a "portable storage device." I have completely uninstalled all Creative products on my PC and reinstalled them using my original installation CD, but this has not helped matters. I cannot find any helpful articles in your Knowledge Base. I would be very grateful if you could provide some assistance in this matter. I have had several years of excellent usage from my Zen Xtra and I am extremely annoyed by this latest development. Not only did the firmware upgrade process require me to delete all the data on my Zen Xtra, but now I seem to have a device which is not functioning at all. Many thanks.

I've received a reply from Creative [see below] which is, frankly, a bit insulting, because it suggests that they never even read my original message to them. Needless to say, I haven't been able to solve the problem. I've written back to them and told them that I'd appreciate further assistance. To top it all off,?I can't even format the Zen Xtra so that I can simply use it as an external hard dri've. Does ANYONE have any advice on this matter? Am I simply supposed to accept that I have a defunct MP3 player on my hands?-- - REPLY FROM CREATIVE?** Kindly read till the end of this email before attempting to
troubleshoot.
While allowing your Zen player to run in Recovery Mode (if possible),
conduct a Clean-Up followed by Reboot.
The link below will guide you on how to run your player in Recovery
Mode.
http://uk.europe.creative.com/suppor...p?l=3&sid=4794
** You may first wish to back-up your files/data/mp3 in your player (if
possible) as updating the firmware may result in a loss of all these
files.
Following which, you may wish to use the function ?Search by File Name
or Model Number? to locate <<ZenXtraP4SAudible_PCFW_LB_2_0_03.exe>> for
download followed by an update of the firmware onto your player (and
monitor if it responds positi'vely to the update) via this link at:
http://uk.europe.creative.com/support/downloads/
Before updating the firmware, you may also like to conduct a check to
see if Windows XP SP 2 has been installed (in your computer) under
Control Panel\System\General.
The download for Windows XP SP2 is available at http://windowsupdate.microsoft.com
If your computer prompts that it ?does not detect? your player, you may
check if your player is actually connected to your computer via Control
Panel/System/Hardware/Device Manager.
You may also wish to remove any unnecessary USB connections from your
computer while charging/updating of firmware and connecting your player
to a USB port (rather than a USB hub) at the rear of your computer.
If your computer happens to already have been updated with the latest
Windows Media Player , you may wish troubleshoot this problem while
referring to this step-by-step link below at:
http://uk.europe.creative.com/suppor...p?l=3&sid=6737
** If this problem still persists, kindly repeat the troubleshoot
procedure again on another different computer.
I certainly hope the above step(s)/information will resolve your
query/problem completely and I look forward to your favourable reply
soon. Do not hesitate to contact Creative Customer Support Services
again should you have any clarifications in future.

Nomad Jukebox Zen Xtra - cannot install firmware - PC states device "not connected&qu

Hi everyone,?Below is a message I've just sent to Customer Support, but I thought I'd also post it here in case anyone has any words of wisdom. Thanks in advance for your help. -- - Dear Madam or Sir,?Yesterday, I tried to connect my Zen Xtra to my PC to transfer some songs from Windows Media Player . WMP produced an error message stating that my PC had a driver for my Zen Xtra which is not supported by WMP. [This was the first time I had tried to Sync my Zen Xtra with WMP.]?I visited www.creative.com and tried to install the latest firmware for my Zen Xtra. The installation of the firmware froze and remained frozen for over an hour. Now the only thing that my Zen Xtra displays is Rescue Mode v.3. I cannot install any firmware at the moment, because the installation wizard keeps stating that my Zen Xtra is not connected to my PC. However, it IS connected and Windows XP detects it up as a "portable storage device." I have completely uninstalled all Creative products on my PC and reinstalled them using my original installation CD, but this has not helped matters. I cannot find any helpful articles in your Knowledge Base. I would be very grateful if you could provide some assistance in this matter. I have had several years of excellent usage from my Zen Xtra and I am extremely annoyed by this latest development. Not only did the firmware upgrade process require me to delete all the data on my Zen Xtra, but now I seem to have a device which is not functioning at all. Many thanks.

I am having the same problem. Seems like to me creative and many of these other companies leave it for people like ya'll to figure out what is wrong with their OWN product LOL? I am having the same exact problem with my 30gb. Guess I will try what you guys and gals said to do and if no luck then would someone please let me know when there is a class action:smileyvery-happy:? I think it's about time companies became more responsible for their actions. Thank you all for figuring it out. I hope this works for mine. I think you all should send Creative a bill for figuring out their problem. I certainly will NEVER buy another Creative product again. i-Pod here i come

Assistance installing Zen Xtra's softwa

Hi just got a Zen Xtra and I belei've the Cd is corrupt as so i cannot install the software to transfer music to my player. Please could someone help me with a link to the software that i will need (bearing in mind i cannot install anything of the cd and so have no drivers either) or if you know another solution i would be greatful. I am running on XP if that is any help.Message Edited by Bedford on 2-25-2004 05:3 PM

More here.

Cannot install driver, plz h

i just got a new hard dri've installed and once i installed all the windows updates and everything else i installed my creative zen vision m and it cant install the driver for it. It recognizes it in device manager and has an ! next to it but under windows explorer it doesnt display it, or in wmp or any creative software. I try updating the driver in device manager with the creative disk in and it says cannot install this hardware. PLEASE HELP

Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
Here are the uninstallation steps to uninstall the software from the computer:
To completely uninstall the software, run the uninstaller at level three using these steps:
1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
3. Click Start on the taskbar and then click Run.
4. In the command box type the following command and press Enter key:
X:\Util\CCC\Uninstall_L3.bat
(X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
Follow the above steps to uninstall the All-in-One software and then restart the computer .
Then download the software from the below web link:
full feature software in vista
Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
Here are the instructions to install the All-in-One software:
1) Unplug the USB cable from the back of the computer
2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
4) Plug in the USB cable when it prompts to connect in the midway of installation
Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
Once you install the All-in-One software check for the result and let us know.

Problem installing Zen Micro on XP compu

Hi,
I recently had a Firmware Problem on my Zen Micro and I was able to fix it by upgrading the Firmware to version 2.2.02.
After doing that my player works fine, but it won't install on my PC (Windows XP). I have tried installing and re-installing all the stuff that came on the original installation CD as well as downloading tons of stuff from creative.com. My guess is that the drivers or something might not?be compatible with my new firmware...
So my computer does detect the Zen Micro when I connect it and 'Found New Harware Wizard' starts. I choose "Install the software automatically" and click "Next". Then the Wizard searches and finds an MTP device (by the way what does MTP stand for?) and tries to install. Then I get this message:
"Cannot Install this Hardware
There was a problem installing this hardware:
MTP Device
An error occurred during the installation of the device
The specified service does not exist as an installed service."
What is the "specified service"? What's wrong and what should I do?
Oh,?My Zen Micro is shown in Device Manager, but with the yellow exclamation mark symbol.

Thanks for your response.
It seems like I cannot download WMP since the Windows Genuine Validation won't work.. Says that I have a pirate copy of Windows although it definiti'vely is real... I guess I should contact Microsoft... This is getting ridiculous, or annoying at least...
Oh, maybe I should mention that I removed WMP from my computer since I was adviced to do so previously. But it should work with WMP0, right Well, can't reload that either because of the validation problem...
I tried downloading Creative Media Source Player/Organizer 5.0.38, but when trying to install I get the following message:
"Setup is unable to detect a supported product on your system".
Message Edited by Makkari on 04-25-2008 04:25 AM

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

Cannot install windows, starting to get really pissed off with this PLEASE HELP

ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!

Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512.

Cannot install Windows 8.1 via Boot Camp on MBPr 13" Early 2013; tried almost everything.

Hi guys,
yesterday, I decided to install Windows 8.1 on my Mac using Boot Camp. I tried to install it, but the first attempt ended into booting to the screen, where it says "Cannot find any bootable device" or something like that. So I googled it up and then tried the EFI Boot. The EFI Boot booted into the Windows installation properly, but I cannot choose the partition I want to install it on. I tried partitioning it in Disk Utility using Tuxera to NTFS, I tried formatting it in the installation itself, always restarted between the processes, I tried to delete the partition and create a new one in the installation, but no luck. I am still stuck on the error "Cannot install Windows on MBR partition. Please, choose a GPT partition". I have a 256GB SSD disk. I browsed the problems and solutions for 3 hours, but no luck. None of the solution helps. The only solution that would work I guess is if I don’t boot into EFI, but into the BIOS installation. But when I do that, I get the "Cannot find any bootable device", so a dead end here. I also tried the tips where they say to remove the USB stick when the Windows installation starts, but didn’t help either.
I am installing using a bootable USB drive, I do not have a Superdrive and cannot even lend it or something like that.
I am really desperate, can anyone please help me?
Thanks in advance,
DavidKop_

Some people have been successful installing 8.1 (me, for instance) despite it not being supported. However this seems to be hardware dependent.
I would have expected the normal WININSTALL option to be available on a Bootcamp-created USB, not just the EFI boot option.
It really depends on whether Bootcamp is creating a hybrid MBR when it creates the Bootcamp partition. Some later model Macs do not. On the Macs that do not create the hybrid MBR Windows may install in EFI mode.
If you remove everything and stretch the Macintosh HD back to the full size of the disc again then reboot and when the system restarts begin the Bootcamp installation again but do not let it restart at that time, you can then run the following code in the terminal and report its output we will be able to see if a hybrid MBR has been created (this is after the partition has been created by Bootcamp, but before it reboots).
sudo fdisk /dev/disk0

Pc cannot install purchased photo elements 13. Error message appears: File archive part missing from Adobe Photo Elements 13. You need all parts in the same folder in order to extract Adobe Photoshop 13. please download all parts.

Cannot install my download due to above error message.

Hi revbos,
Apologies for your incovinience.
Requesting you to please go to https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us. When you click on download button (after selecting your OS details), it should open a new browser window (which will launch the Akamai installer automatically). Please cancel any installation or error shown.
The newly opened browser page will look something like this:
As highlighted, please click on these links (one by one) and see if it downloads the required files. The downloaded files will be compressed with 7z format. If you have some extracting tool (like WinZip) try extracting it. If you don't have it, download 7z. Its a free utility from Microsoft. Once downloaded and installed, you will be able to extract file and locate the PSE setup.
Please let me know if you face any issues.
~Surendra

I have downloaded/paid fora plug in from adobe site (cracked backgrounds) it told me ti install creative Cloud which i have done but i cannot install the plug in into lightroom5 via plug in manger to use the backgrounds...please help as this is the firs

Ihave downloaded/paid for a plug in from adobe site (cracked backgrounds) it told me ti install Creative Cloud which i have done it shows the plug in on there as downloaded but i cannot install it into lightroom 5 to use? i have tried the plug in manger but it says cannot install plug in..also downloaded the Adobe extension manager cc but that does not add either....Please help first time i ave tried to install a plug in !!!!!! Lucy

Dear Lucy
Please remember to unzip the file from your Downloads folder in order to load them into Lightroom.
What is the error in Lightroom?
Did you read the 'Where to Find it' section?
Thanks,
Krystal - Add-ons team

After IOS 8 update, cannot install or update app

As my subject mentioned, after the ios 8 update, i cannot install or update app. I have done everything like calling the tech support, follow their instructions etc.. Some of the things i had done were
Soft reset ipad
Hard reset ipad
logout of itune store and login
delete everything on ipad and restore from itunes.
All these doesn't work and the problem keeps coming back again. This is frustrating that Apple would release an update like this that would break my ipad air. On top of that, quite a lot of app are not working eg zinio, evernote. My ipad air has been in this mode eversince the update release and i had mostly given up to resolve it. For all other ipad owners, if you want to avoid this anguish don't update to ios 8.

You are not alone. Here's one thread
Why can't I download or update apps on iPad running iOS 8
If you have the WSJ app installed, delete it and see if that fixes things. It immediately fixed it for me, but not for all people with the problem.

Unisphere Host Agent cannot install on Windows 2012 R2 Core

Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013 updates to Windows 8 and Windows server 2012.

Cannot install EMC Unisphere Host Agent on Windows Server 2012 R2 Core server.
When trying to install into Hyper-V 2012 R2 I get an error informing of the requirement for Feb 2013
updates to Windows 8 and Windows server 2012.

Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
== computer was recently wiped clean and am now reinstalling all previous software and applications ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

Cannot install zen pla

Similar Messages

Maybe you are looking for