Cannot issue backflush component

Good Morning,
When i try to add a Receipt from Production with a few productions orders i have the message error "Cannot issue backflush component [Goods Receipt - Row - Warehouse Code]...".
If I try to post one at a time i have no errors.
What can I do to post all productions orders in the same Receipt from Production?
Thank you,
Susana Cunha.

Hello Susanna,
If I understood correctly you have this situation:
A - parent
1 2 and 3 are children
3 is parent of S, D, F.
One question:
are you trying to add in the same Receipt from Production the production A and the production 3? Are you sure you have enough quantity in stock for 3 even before running the receipt from production? If you don't you might not have quantity to produce the item A.
Please, let me know if this helped.
Regards,
Marcella Rivi
SAP Business One Forums Team

Similar Messages

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

BPC 7.5 - Cannot create ActiveX component

Hi all,
I am installed BPC 7.5M on win2003x64, 32bit IIS, 32bit MSSQL
when go to http://hostname/OSoft at server side or client side
it will have following error.
Anyone have any idea? i am new to BPC
thx
John
Event Type:     Warning
Event Source:     ASP.NET 2.0.50727.0
Event Category:     Web Event
Event ID:     1309
Date:          8/19/2010
Time:          2:14:37 PM
User:          N/A
Computer:     hostname
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 8/19/2010 2:14:37 PM
Event time (UTC): 8/19/2010 6:14:37 AM
Event ID: 8292453043e140608735e4750f8d08d8
Event sequence: 34
Event occurrence: 11
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/root/OSoft-1-129266712148491238
Trust level: Full
Application Virtual Path: /OSoft
Application Path: D:\Program Files\BPC\Websrvr\Web\
Machine name: hostname
Process information:
Process ID: 9848
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: Exception
Exception message: Cannot create ActiveX component.
Request information:
Request URL: http://hostname/OSoft/Launch.aspx
Request path: /OSoft/Launch.aspx
User host address: IP
User: domain\user
Is authenticated: True
Authentication Type: Basic
Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:      Thread ID: 7
Thread account name: NT AUTHORITY\NETWORK SERVICE
Is impersonating: False
Stack trace:    at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName)
   at OSoft.Consumers.ZFP.WebBase.PageBase.InitComLib()
   at OSoft.Consumers.ZFP.WebBase.PageBase.MakeSecurity(String strUserID)
   at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Hi,
This might be because of:
1. Missing or disabled Osoft.Services.Platform.YukonAdmin.Olap9Manager component from the Component Services>OsoftSQL2005Admin.
2. Installation pre-requisite for Application Server, SQLServer2005_ADOMD.msi has not been correctly installed or corrupted.
Would suggest you to implement the following:
1. Install the newly installed BPC Application server
2. Reboot Server
3. Install SQLServer2005_ADOMD.msi from Microsoft
4. Reinstall BPC Application Server
5. Reinstall applicable patches
Hope this helps in resolving your issue.
Regards,
Poonam

New installation and SP2 upgrade of 7.5 - Cannot create ActiveX component

Hi guys,
New installation (w/ SP2) on 64bit Server 2003. when attempting to reach Http://Server/OSOFT I'm receiving the following error -
Server Error in '/OSoft' Application.
Cannot create ActiveX component.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Cannot create ActiveX component.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: Cannot create ActiveX component.]
   Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName) +232
   OSoft.Consumers.ZFP.WebBase.PageBase.GetZFPText(Int32 intID, String strParam1, String strParam2, String strParam3, String strParam4, String strParam5) +422
   OSoft.Launch.Page_Load(Object sender, EventArgs e) +51
   System.EventHandler.Invoke(Object sender, EventArgs e) +0
   System.Web.UI.Control.OnLoad(EventArgs e) +67
   System.Web.UI.Control.LoadRecursive() +35
   System.Web.UI.Page.ProcessRequestMain() +731
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I've tried the following note (which seems very similar to my issue) only relevant to 7. and it did not help.
1342140 - Cannot create ActiveX Component BPC 7 NW I've restarted the IIS and it did not help.
Please advise..
Thank you!

Hi,
I had the same problem with my BPC 7 installation yesterday and followed all the proposed solutions in this thread with no luck. When I checked, the OSoftResSvrZFP_EN.dll was missing - you might be missing this too. Anyway, I solved it by running the BPC 7.0 server installation exe and then selected 'Repair'.
Regards,
Danny

Cannot create ActiveX component

So, I've looked all over for an answer for this one and so far, everything I've seen offered as fixes do not work.
Exception Details: System.Exception: Cannot create ActiveX component.
Source Error:
Line 39:
Line 40:             ' Create Acrobat Application object
Line 41:             PDFApp = CreateObject("AcroExch.App")
I have a webserver on which is installed the latest version of Acrobat Standard.
Here is my code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Web.Configuration
Imports System.Data.OleDb
Imports System.Security
Imports System.Security.Principal
Partial Class CodeTest
    Inherits System.Web.UI.Page
    Dim LOGON32_LOGON_INTERACTIVE As Integer = 2
    Dim LOGON32_PROVIDER_DEFAULT As Integer = 0
    Dim impersonationContext As WindowsImpersonationContext
    Declare Function LogonUserA Lib "advapi32.dll" (ByVal lpszUsername As String, _
                            ByVal lpszDomain As String, _
                            ByVal lpszPassword As String, _
                            ByVal dwLogonType As Integer, _
                            ByVal dwLogonProvider As Integer, _
                            ByRef phToken As IntPtr) As Integer
    Declare Auto Function DuplicateToken Lib "advapi32.dll" ( _
                            ByVal ExistingTokenHandle As IntPtr, _
                            ByVal ImpersonationLevel As Integer, _
                            ByRef DuplicateTokenHandle As IntPtr) As Integer
    Declare Auto Function RevertToSelf Lib "advapi32.dll" () As Long
    Declare Auto Function CloseHandle Lib "kernel32.dll" (ByVal handle As IntPtr) As Long
    Private Sub savePDFtoTIF(ByVal fullPathPDF As String, ByVal fullPathTIF As String)
        Dim PDFApp As Acrobat.AcroApp
        Dim PDDoc As Acrobat.CAcroPDDoc
        Dim AVDoc As Acrobat.CAcroAVDoc
        Dim JSObj As Object
        If impersonateValidUser("XXXXXXX", "", "XXXXXXXXXX") Then
            ' Create Acrobat Application object
            PDFApp = CreateObject("AcroExch.App")
            ' Create Acrobat Document object
            PDDoc = CreateObject("AcroExch.PDDoc")
            ' Open PDF file
            PDDoc.Open(fullPathPDF)
            ' Create AV doc from PDDoc object
            AVDoc = PDDoc.OpenAVDoc("TempPDF")
            ' Hide Acrobat application so everything is done in silentmode()
            PDFApp.Hide()
            ' Create Javascript bridge object
            JSObj = PDDoc.GetJSObject()
            ' Attempt to save PDF to TIF image file.
            ' SaveAs method syntax .SaveAs( strFilePath, cConvID )
            ' For TIFF output the correct cConvid is
            ' cCovid MUST BE ALL LOWERCASE.
            JSObj.SaveAs(fullPathTIF, "com.adobe.acrobat.tiff")
            PDDoc.Close()
            PDFApp.CloseAllDocs()
            ' Clean up
            System.Runtime.InteropServices.Marshal.ReleaseComObject(JSObj)
            JSObj = Nothing
            System.Runtime.InteropServices.Marshal.ReleaseComObject(PDFApp)
            PDFApp = Nothing
            System.Runtime.InteropServices.Marshal.ReleaseComObject(PDDoc)
            PDDoc = Nothing
            System.Runtime.InteropServices.Marshal.ReleaseComObject(AVDoc)
            AVDoc = Nothing
            undoImpersonation()
        Else
            lblStatus.Text = "Unable to impersonate"
            Exit Sub
        End If
    End Sub
    Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
        savePDFtoTIF("D:\DoH\998.110803030832.pdf", "D:\DoH\Project\000.tif")
    End Sub
    Private Function impersonateValidUser(ByVal userName As String, _
ByVal domain As String, ByVal password As String) As Boolean
        Dim tempWindowsIdentity As WindowsIdentity
        Dim token As IntPtr = IntPtr.Zero
        Dim tokenDuplicate As IntPtr = IntPtr.Zero
        impersonateValidUser = False
        If RevertToSelf() Then
            If LogonUserA(userName, domain, password, LOGON32_LOGON_INTERACTIVE, LOGON32_PROVIDER_DEFAULT, token) <> 0 Then
                If DuplicateToken(token, 2, tokenDuplicate) <> 0 Then
                    tempWindowsIdentity = New WindowsIdentity(tokenDuplicate)
                    impersonationContext = tempWindowsIdentity.Impersonate()
                    If Not impersonationContext Is Nothing Then
                        impersonateValidUser = True
                    End If
                End If
            End If
        End If
        If Not tokenDuplicate.Equals(IntPtr.Zero) Then
            CloseHandle(tokenDuplicate)
        End If
        If Not token.Equals(IntPtr.Zero) Then
            CloseHandle(token)
        End If
    End Function
    Private Sub undoImpersonation()
        impersonationContext.Undo()
    End Sub
End Class
The impersonation works, as I use the same code on another page where I am manipulating file system objects through that account, with this code. Also, the code without the impersonation, works on my local machine perfectly.
Any ideas on what to do would be greatly appreciated.
Justice

Look, I got dragged into a project that was late from the start, but is a big contract for the printing company that I work for that uses a lot of Adobe products internally for what they do.
In good faith, I tried to purchase something that would work. I was in a rush and didn't read the entire EULA as I was installing it. Obviously, I wasn't trying to screw the system or I wouldn't have been here, posting about it. I also do not need an education about what is true or false on the internet. I need a solution now that is going to meet the customers needs based on what is provided here. Rather simple, and don't reallly have the time for an entire formalized consultation as to our "business needs", since this is really all we need it for and time is of the essence.
If the best Adobe can do is publicly slap customers around on forums and throw vague answers out to follow up on, then I guess it's time to seek out other solutions for our business needs.

BOM Component quantity vs Backflush Component quantity

dear sirs,
shall the 2 kinds of quantities be the same? when running backflush, component list exploded differs from that of BOM.
what is in contact with them in between?
thanks a lot!
Mandy

dear Venugopal,
my question is, provided all master data maintained in place, when running some planned order to backflush, the quantity of component list doesnt match that by diploid in BOM.
Say, material 1 stands 1kg in BOM (on condition of base qty 100kg of Assembly), when backflushing a planned order - 200kg, excluded scrap factor in BOM, the qty of material 1 in component list of backflush table doesnt equals 2kg.
thanks so much for your prompt support!
Mandy

Acrobat - Cannot create ActiveX component

I'm using Visual Studio 2005 (.Net 2.0) Console Application to interact with Acrobat 9. I'm trying to open an existing PDF and Save as TIFF (using the JSObj = PDDoc.GetJSObject() and JSObj.SaveAs()). On the development computer with Acrobat 9.1.3 installed it works fine. If I move the executable to my colleague's development machine (Acrobat 9.2) the code throws error: Cannot create ActiveX component. The Interop.Acrobat.dll resides in the same folder as the .Net exe. Last month, this worked fine on my collleague's computer. What has changed on his computer to prevent the ActiveX component from launching? Below is the code snippet. Other info: Acrobat 9.2 is the only Adobe app installed on the destination computer.
Any ideas would be helpful.
Dim PDFApp As Acrobat.AcroApp
Dim PDDoc As Acrobat.CAcroPDDoc
Dim AVDoc As Acrobat.CAcroAVDoc
Dim JSObj As Object
Try
' Create Acrobat Application object
PDFApp = CreateObject("AcroExch.App")
' Create Acrobat Document object
PDDoc = CreateObject("AcroExch.PDDoc")

Just realized I replied to my own message...
The repair did not work.
Notes:
===============================================================
- When I open the Acrobat UI with a PDF and then Save as TIFF, it works great.
- Event Viewer: System Error: The server {85DE1C45-2C66-101B-B02E-04021C009402} did not register with DCOM within the required timeout. I checked this ClsID in the Registry and it's the PDFShellInfo Class ("C:\Program Files\Adobe\Acrobat 9.0\Acrobat\AcrobatInfo.exe" /PDFShell).
Should I uninstall Acrobat and re-install? I'm at wits end...
Thanks in advance.

Cannot find Installed Component

Hi,
Can anyone tell me why I cannot find the component I
installed from Extension Manager. I checked the Windows menu as
stated from the Extension Manager after I installed and restarted
Adobe Flash but I find nothing.
From Extension Manager: I was told the component can be found
in Windows >> Components ... >> ... as below:
UI ACCESS:
After the installation of the component, you can find Web
menu component in the menu of the Components Panel in Flash.
(Select Windows > Components panel > FreeWebMenus.com
> Name of the menu).
Thanks and regards,
/.. Waynacle

I found the solution in this thread:
Proc/c++

To issue the component to the Production Order

Hello All,
I have assigned the component to the Operation of Production Order from Different plant(say 1100) of Same company code(1000).
I want to issue that material from that plant to this plant (say 1000) of Production Order.
So my question is the correct method of directly issuing the component to this Production Order of different plant.
Shailendra

Hi HAdkar
The correct procedure is .
You have to assign special procurement key 80 in material master for which you want to procure from plant 1100. The material master of procuring material should exist for the plant 1100. While running MPR the procurement proposal will be automatically created in the 1100 plant. From 1100 plant you do stock transfer to your storage location. Then finally do GI for the header prod order in you plant.
This is the procure in SAP. Eventhough both the plants exist in the same compound.
Regards
J . Saravan

Critical B2B issue regarding component seprator

Hi Guru's
we are facing one critical issue regarding component seprator. We want to have folling component seperator delimiter as "|" (HEXA 0x7c) e.g
ISA*00* *00* *01*041158668 *07*5051379000004 *100203*1259*^*00501*000001505*0*P*|~
where as we are getting ">" (hexa 0x3e)
ISA*00* *00* *01*041158668 *07*5051379000004 *100421*1532*^*00501*000001049*0*P*>~
I tried changing the value in capabilities of TP but it didn't effected the result. Also I tried changing the defualt values in Business Action but the result remained same.
Please advise us on how to resolve this issue. Its a requirement for us to have 0x7c.
any pointers will be highly appreciated.
Regards
Sahil

Hi Sahil,
Override the default/current values in the operational capability of Remote Trading partner and revalidate and redeploy the agreement. Make sure that you are not passing internal properties from the back-end.
In case still the issue persists, mail back your b2b log, ecs file and payload.
Regards,
Anuj

Issue on component backflush.

Hi gurus,
When i do the component backflush to the order do i get the document with 261 movements.Is that confirmation for that document happened or not Through a component backflushing?. How can i know whether confirmation has happened or not through a material document.
Please help me..
Thanks.

Hi Naveen,
Assembly backflush for the Header material i.e. GR with movt type 101 and
Component Backflush is for the BOM Item i.e Goods Issue with the movt type 261.
As I had explained previously once you get a document with 261 movement means the Goods Issue happened succefully. The material document can be checked in Tcode : MB03. If assembly backflush has happened you can see the Header Material with the movt type 101.
Hope it is clear.
regards
radhak mk

I cannot install the component for QuickTime to convert videos done by a Sony video camera. My iMac tells me that software is designed for previous versions of Os x. Any ideas?

I cannot install the QuickTime component for MPEG-2 to read and covert video files created by Sony video cameras. My iMac tells me that the software is designed for previous versions of OS X.
Any ideas?

Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

Enhancing F4 Search Help Issue - Standard Component

Hello All,
We have a requirement in SRM to customize couple of standard Search helps attached to the Webdynpro components. As such I know the concept of how we can handle this requirement but hitting an issue.
Standard Working scenario -
1) Standard Structure available with multiple fields. Two fields that are of our interest are SH_VALUE and SH_VALUE_LABEL.
2) Standard Search help for this being used has fields VALUE and VALUE_LABEL.
3) In the Structure the both the fields SH_VALUE and SH_VALUE_LABEL are mapped to the Search help VALUE and VALUE_LABEL.
4) In the WD component the node is mapped to the standard structure.
Running the application and the picking up the values from F4 on the SH_VALUE field will return its corresponding value and also map the SH_VALUE_LABEL field with the Label from the F4 since the structure and Search help mapping are there.
So far good when its standard.
Issue I am facing -
We need to modify this standard search help to customize our needs.
1) Did a Copy of the standard Search help and then modified to suit our needs. The output structure of the search is still the same as the standard one.
2) Did a Post Exit in the WD component to call our custom search help through the below code -
data lo_nd_attrib type ref to if_wd_context_node.
data lo_nd_attrib_info type ref to if_wd_context_node_info.
lo_nd_attrib = wd_context->path_get_node( path = `ATTRIBUTES_DATA.ATTR_DTLS_MULT` ).
lo_nd_attrib_info = lo_nd_attrib->get_node_info( ).
lo_nd_attrib_info->set_attribute_value_help( name = 'SH_VALUE' value_help_mode = '121' value_help = 'Z_ORG_ATTR' ).
lo_nd_attrib_info->set_attribute_value_help( name = 'SH_VALUE_LABEL' value_help_mode = '121' value_help = 'Z_ORG_ATTR' ).
Running the application just returns the SH_VALUE field but does not get the data for the SH_VALUE_LABEL.
Is there something wrong in the way I am calling the Custom Search help or should I need to approach this differently?
Thanks,
Nagarajan.

Hi Nagarajan,
Well, you are trying to set the search help to both attributes ( sh_value, sh_value_label) individually and it is having no link between these two attributes
i.e. once you select a value from search help of SH_VALUE, its no where linked that the other details to be passed to SH_VALUE_LABEL.
We generally, do the linking of attributes to search help parameters at structure level as below
So, if you need the same behaviour, then you need to assign the Zsearch help at strucuture field SH_VALUE and link the parameters to both fields SH_VALUE & SH_VALUE_LABEL
In case, if find it not possible to to this way,
You need to populate the value of field SH_VALUE_LABEL upon selection of value from search help of SH_VALUE.
i.e. by registering the search help selection event to an OnEnter action and write the logic to populate the value to SH_VALUE_LABEL
Please refer the below link
Automatically Trigger onEnter event after selecting value from the Value Help(F4 Help)
Hope this helps you.
Regards,
Rama

Insufficient Batched Qty available for Qty in Stock - cannot issue Stock

Hi Experts,
My customer has a batched managed stock item with a qty of 75 in stock. They are now trying to issue the 75 items, but there are only 5 available within existing batches.
In 2005 we were able to retrospectively add a batch for the missing batch qty (in this case 70) but it does not seem possible in 2007.
Is this possible in 2007?
Thanks
Greig

You can issue the 5 out and then receipt the 75 in and and use the same batch number.

IPad 2 issue with Component to TV

I have just purchased a Genuine Apple AV Component cable to connect to my TV.
I connected it all up at the back of the TV, and connected it to my iPad 2 (5.0.1). Now I can get Audio, but no video.
Connected it to the USB to give it charge..
Looked under Settings General and there wasn't a TV OUT option, as I was expecting
Also, within Video there wasnt any option to change PAL/NTSC. I'm based in the UK
Any ideas?

Same problem: we have 2 iPads: the one iPad 2 with version 4.3.5 is working fine, with the AV cable connector on it mirrors the iPad 2 perfectly. The TV out settings are displayed under Video.
However with my other iPad 2, version 5.0.1, the latest, it's now impossible to use the mirroring feature, the same AV cable, connected to the same TV or monitor is not even detected by the iPad. The TV out settings are no longer in the Video settings (now replaced by the Home Sharing Id, you really wonder why...). I need the mirroring function back as I'm using my iPad for work to do presentations and the external monitors, TV or projectors won't detect it at all..and of course the expensive AV cable is now useless..
I've tried looking for the TV out settings under the General Settings as recommended by other people on the forum but they don't appear even when the AV cable adapter is connected.
I really hope it's a bug and that Apple is going to fix it ASAP!

Cannot issue backflush component

Similar Messages

Maybe you are looking for