Cannot Join Cd Tracks

Hi,
My join cd tracks is greyed out. I been trying to join cd tracks into one. It did work but then after 4 months ago the join cd tracks got greyed out. I need this option cause i have single tracks that i would like to join into one. I did hightlight selected all i do see the blue but still no join cd tracks not avaible.
Thanks

Are you trying to do this with a CD you are ripping or a CD that is already ripped as files on your computer? iTunes will only do it with CDs as you are ripping them. If it is other tracks you need to try using something such as the Join Together utility on the Dougscripts web site.

Similar Messages

Cannot "Join CD Tracks" No Matter What!

I made an error in my previous post: "combine cd tracks" should read "join cd tracks" wherever it appears in the text. I just didn't want to confuse anyone that tried to help me. Thanks.
Power Mac G5 (Dual 2.7) Mac OS X (10.4.3)
Power Mac G5 (Dual 2.7) Mac OS X (10.4.3)

Did you select the very left column to sort the disk? Click again on the little triangle until track #1 is at top and the last track at the bottom.

Cannot join time capsule airport network from iPad 2 or iPhone 4

I have recently setup a new time capsule airport base station network with my new iMac (27-inch, late 2012) running OSX 10.8.2. Wi-Fe network works fine for internet access and printing from the iMac but I cannot join the wi-fi network from our iPad 2 or iphones. The network is seen in the wi-fi setup when wi-fi is turned on with the ipad and phone but does not establish a connection. An IP address and subnet mask show under the DHCP settings but the connection is not established. (Continuous revolving wheel).
Any help would be appreciated.

The airport utility in Mountain Lion is a toyland version.. see bottom of post for installing v5.6 which improves the ability to actually make the TC do what you want.
For whatever reason the iphone/ipad seem sensitive to wireless channels.. which Apple auto rotate.. I think it is bluetooth connection stuff.
Anyhow jump in and set the following.
Wireless should have strictly SMB names.. short no spaces, pure alphanumeric.
Use WPA2 Personal security.
Lock the wireless channel for 2.4ghz.. try in the following order.. 11, 6, 1 (those are the only non-overlapping channels) you can try in turn for which is best but if 11 works well stick to it.. Outside USA you can also use 13.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

My iPhone 4S has stopped receiving iMessages, cannot send/load any pictures over whatsapp, cannot join the wifi in my house anymore. What has happened to my iPhone i haven't made any changes?

My iPhone 4S has stopped receiving/sending iMessages, cannot send/load any pictures over whatsapp and cannot join the wifi in my house anymore.
Essentially all the things I use my phone for have now stopped working. I constantly have 3G connected (even though i dont want to use it, i want to connect to the wifi in my house) but still when I try to download/ send a picture over whatsapp it comes up with an error message saying the server is unverified, or something equally ridiculous.
I deleted the app so i could reinstall it (as if that would help), but the app store is started saying "unable to connect", despite 3G, so that bright idea died out pretty sharpish.
Whenever i try to turn on iMessage, it asks for my Apple ID password, which I know I've typed in correctly because I reset the **** thing about 4 times due to it apparently being "incorrect". Even so, it repeatedly asks for the password over and over as soon as I've entered it, saying it was "unable to connect" before a final "incorrect password" message pops up just to add an extra smack of annoyance.
I haven't changed a single setting on my iPhone whatsoever. It just suddenly started spiralling into what is now £28/month-worth of pure frustration.
I don't even have any music or photos on it as I had to free up 3.5GB of space on the **** thing to allow it to update, naively thinking that would solve the problem, but alas it did not.
I have seen a few questions posted like this one, usually just one of the problems I have, but I seem to have rounded up the whole bunch (lucky me). None of the previously posted questions have received any replies.
Can some please help me! Honestly, if i see another "unable to..." or "unverified source" pop up again I'll probably smash the thing against the side of my house.
Cheers.

On your iPad, go to [Settings > General > Reset > Reset Network Settings] Once that is done, re-connect your iPad to your wifi network.

HT1473 I have always imported my cds into iTunes using one step called 'joining cd tracks' which is done under the "Advanced" drop down menu. I then went on with the process. Half way through the process today the "join tracks' choice greyed out. Not avai

I have always imported my cds (including books) into iTunes using one step called "join cd tracks" which is under the "Advanced" menu. Never a problem. But today I was importing a 10 disc book and on the 7th disc all of a sudden the choice to join cd tracks was greyed out. I have tried it with other discs. No luck. How can I get to this option again. I was not doing anything different so don't know what took away this choice. Can anyone help me?

Thought it had worked but soon found out it had not.
after further days of trying finally, solved it for me Yesterday.
turned off notifications when locked, and bingo, wow.
i have not turned off iCloud but location services are also off.
best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
anyway anyone out there please try my final solution and let me know if it works for you?

My iPhone 4s cannot join a public unsecured network but my iPad and macbook can. I have reset the network settings twice. Both times it worked, but only for a few minutes. What can I do?

My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems. I have reset the network settings on the iphone twice. Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again. Please help! What can I do?

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

I would like to know if I can "join CD tracks" once they are downloaded into a playlist in my ITunes folder on my computer and/or how do you "join CD tracks" if you are downloading from iTunes itself. I have two songs that I would like to "join" but I d

I would like to know if I can "join CD tracks" once they are downloaded into a playlist in my ITunes folder on my computer and/or how do you "join CD tracks" if you are downloading from iTunes itself. From the information through the "Help" menu, it seems you can only "join cd tracks" when you are in the process of downloading them from a CD onto your iTunes playlist?
.....any suggestions would help.
Thank You
DW

The help menu is correct.

New 2012 R2 domain - xp clients cannot join or print

I just migrated a 2003 domain to 2012 R2.   Things were working ok & then XP clients became AD stupid.
Steps I took:
Added a VM 2012 R2 DC to the domain. Server had DNS installed. Ran dcdiag & bpa and resolved any issues.
About a week later I moved all roles over to the VM DC.
Tore down one of the NT2003 DCs (not VM) and rebuit it as a 2012 R2 DC w/DNS. Ran dcdiag & bpa and resolved any issues. Had problems with DNS scavenging removing some static records. readded records & made sure the "Delete
record when it becomes stale" was unchecked on all static records (all fwd & rev zones).
Moved all roles from the VM DC to the hardware DC.
After a week I tore down the 2nd (& last) nt2003 DC (not VM) and rebuilt it as a 2012 R2 DC w/DNS. Ran dcdiag/bpa and fixed any issues. Also ran it on the other DCs.
Removed the VM 2012 R2 DC from the domain (demote, remove features, remove from domain, power off, delete VM).
Everything seems to be working fine. dcdiags look clean, event logs seem good.
Bump forest/domain to 2012 R2 native.
Then, a few days later, it goes bad. I (after hours) install all accumulated updates on both DCs. Reboot both.
Next AM a user calls. Her thin client cannot connect to the terminal services server. DNS has deleted its dns record, even though the delete when stale was unchecked. :| So I readd the static record and turn off scavenging.
Problem solved.
Next call s from a XP user (we have XP, Win 7, and thin clients). She cannot print. Printers show "cannot connect". Try various things to no avail. Check Win 7 boxes and they're working fine & printers are connected.
Note that the XP & Win7 boxes all pull their DHCP address from the same dhcp server/scope.
Review error logs and run dcdiag. There are several somewhat esoteric errors. After several hours or tail chasing I decide to take a more scorched earth tack. I demote the 2nd DC and remove AD & DNS from it. After demotion and role
removal I check AD and it still shows the DC. I remove the now just a server from the domain. Clean up DNS & AD removing all traces. This takes a while as I have to run variuos scripts (tahnk you google) to ensure AD is clean.
Run dcdiag and resolve issues. Even a detailed dcdiag comes out clean. Replication tests show the old server is now forgotten.
Check XP boxes and they still show printers as "cannot connect".
Remove a XP PC from the domain. Try to rejoin and I get a error. Rename it and still get the error. I can ping, nslookup, etc and they return the correct IP.
I've tried the simple change the join a domain in system properties. That gives a somewht non descript error. The network identification wizard seemed to find the domain but didn't work. As it was trying to find the PC in AD, I went ahead
and added it via AD users& Computer console. Run the wizard and it tells me it found the record in AD. It then says "a domain controller for the domain [ourdomain] could not be contacted." !? Yet the prior screen it told
me it had found the record for the PC on the DC.
nslookup for ourdomain.local as well as dcname.ourdomain.local resolve correctly. Tried chenging the PC to static - no change. Rename the old win 2012 R2 dc (now just a server outside the domain), reboot, and the try to rejoin the domain.
Works flawlessly.
BTW - We're running tcpip w/o netbios over tcpip.
So basically my XP boxes cannot use AD printers and cannot join the domain. IDK if they're picking up gp updates (I'll check in the AM), but I suspect they're not.
Short of buying a truckload of Win 7 licenses and reloading OSs, what can I do to fix this?
Details on the XP box error (fyi - I did a record to record comparison to a Win 2008 domain's SRV records and they look identical (except, fo course, the domain& server names)) :
The domain name [ourdomain] might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with WINS.
If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain [ourdomain]:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.[ourdomain]
Common causes of this error include the following:
- The DNS SRV record is not registered in DNS.
- One or more of the following zones do not include delegation to its child zone:
[ourdomain]
. (the root zone)
For information about correcting this problem, click Help.
dcdiag /test:dns results
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = Domctl1
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\DOMCTL1
      Starting test: Connectivity
         ......................... DOMCTL1 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\DOMCTL1
      Starting test: DNS
         DNS Tests are running and not hung. Please wait a few minutes...
         ......................... DOMCTL1 passed test DNS
   Running partition tests on : DomainDnsZones
   Running partition tests on : ForestDnsZones
   Running partition tests on : Schema
   Running partition tests on : Configuration
   Running partition tests on : [ourdomain]
   Running enterprise tests on : [ourdomain].local
      Starting test: DNS
         Test results for domain controllers:
            DC: Domctl1.[ourdomain].local
            Domain: [ourdomain].local
               TEST: Dynamic update (Dyn)
                  Warning: Failed to delete the test record dcdiag-test-record in zone [ourdomain].local
               Domctl1                      PASS PASS PASS PASS WARN PASS n/a
         ......................... [ourdomain].local passed test DNS

I see the following errors:
"TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing
connections are opened and closed at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period
to elapse between successive connections from a given local endpoint to a given remote endpoint."
Please read that: http://social.technet.microsoft.com/Forums/windowsserver/en-US/d770e9fd-53a2-4ae9-99b3-2754c4564592/tcpip-connection-issue-on-windows-server-2008-sp2?forum=winserverPN
"DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID      b70 (C:\Windows\system32\dcdiag.exe)."
As you can see, it is pointing to 8.8.8.8. You need to make sure that public DNS servers are configured as forwarders and not in IP setting of your DCs. Better if you could use your ISP DNS servers as public ones instead of 8.8.8.8.
Please read this Wiki article for recommendations about IP settings: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
" TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone [ourdomain].local
Warning: Failed to delete the test record dcdiag-test-record in zone [ourdomain].local
[Error details: 9505 (Type: Win32 - Description: Unsecured DNS packet.)]
Here, you need to make sure that only secure DNS updates are allowed if you would like to secure dynamic updates. This is detailed in here:http://social.technet.microsoft.com/wiki/contents/articles/21984.how-to-secure-dns-updates-on-microsoft-dns-servers.aspx
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Macbook ver 10.6.8 after update 10.6.8 combo cannot join open wifi anymore

I am using Macbook ver 10.6.8 after update 10.6.8 combo i cannot join open wifi anymore.it shows me no internet connection.in fact before this i can acces any open wifi smoothly.it makes me annoyed and regret my action updating the combo.almost 3weeks i try to find the solution by read any suggestion from community but it makes me frustrated. for sure i refuse to send away my macbook to technician because what i knew they also take solution from here.i state here my macbook details :
Model Name:          MacBook
Model Identifier:          MacBook3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.2 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB31.008E.B02
SMC Version (system):          1.24f3
Serial Number (system):          W8744400Z63
Hardware UUID:          6172E4C5-C120-5C8A-9B2E-430B3D42C912
Sudden Motion Sensor:
State:          Enabled
this the details my current network:
AirPort:
Type:          AirPort
Hardware:          AirPort
BSD Device Name:          en1
IPv4 Addresses:          169.254.70.222
IPv4:
Addresses:          169.254.70.222
Configuration Method:          DHCP
Interface Name:          en1
Subnet Masks:          255.255.0.0
IPv6:
Configuration Method:          Automatic
Ethernet:
MAC Address:          00:1d:4f:fc:c2:34
Media Options:
Media Subtype:          Auto Select
Proxies:
Exceptions List:          *.local, 169.254/16
FTP Passive Mode:          Yes
Service Order:          2
this is the open wifi i always acces smoothly before i update the combo:
Software Versions:
Menu Extra:          6.2.2 (622.2)
configd plug-in:          6.2.5 (625.6)
System Profiler:          6.0.1 (601.1)
Network Preference:          6.2.2 (622.2)
AirPort Utility:          5.6.1 (561.3)
IO80211 Family:          3.2 (320.1)
Interfaces:
en1:
Card Type:          AirPort Extreme (0x14E4, 0x88)
Firmware Version:          Broadcom BCM43xx 1.0 (5.10.131.42.4)
Locale:          APAC
Country Code:          MY
Supported PHY Modes:          802.11 a/b/g/n
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Wake On Wireless:          Supported
Status:          Connected
Current Network Information:
TM WiFi:
PHY Mode:          802.11g
BSSID:          0:19:be:80:20:1a
Channel:          1
Country Code:          MY
Network Type:          Infrastructure
Security:          None
Signal / Noise:          -77 dBm / -94 dBm
Transmit Rate:          36
Other Local Wireless Networks:
TM WiFi:
PHY Mode:          802.11g
BSSID:          0:19:be:80:21:96
Channel:          6
Network Type:          Infrastructure
Security:          None
Signal / Noise:          -78 dBm / -99 dBm
Location (8/1/12 8:22 AM):<<<<<<<<<-------------------------At this time i can acces this open wifi with auto-login
Active Location:          No
Services:
Ethernet:
Type:          Ethernet
BSD Device Name:          en0
Hardware (MAC) Address:          00:1b:63:a6:2e:44
IPv4:
Configuration Method:          DHCP
IPv6:
Configuration Method:          Automatic
Proxies:
Exceptions List:          *.local, 169.254/16
FTP Passive Mode:          Yes
FireWire:
Type:          FireWire
BSD Device Name:          fw0
Hardware (MAC) Address:          00:1d:4f:ff:fe:72:00:d4
IPv4:
Configuration Method:          DHCP
IPv6:
Configuration Method:          Automatic
Proxies:
Exceptions List:          *.local, 169.254/16
FTP Passive Mode:          Yes
AirPort:
Type:          IEEE80211
BSD Device Name:          en1
Hardware (MAC) Address:          00:1d:4f:fc:c2:34
IPv4:
Configuration Method:          DHCP
IPv6:
Configuration Method:          Automatic
DNS:
Search Domains:          , 94C723E0-B495-45CF-8ACE-279AF0F2D687
Server Addresses:
Proxies:
Exceptions List:          *.local, 169.254/16
FTP Passive Mode:          Yes
IEEE80211:
Join Mode:          Automatic
JoinModeFallback:          Prompt
PreferredNetworks:
SecurityType:          Open
SSID_STR:          TM WiFi
Unique Network ID:          94C723E0-B495-45CF-8ACE-279AF0F2D687
after i update the combo:
and the page which the open wifi load automatically did not appear as before.
if the update affect the wifi,cant i just downgrade and remove the annoyed combo?any expertise r welcome to give great solution..plzz!!!need your help!!!!

cant believe it nobody reply.. very dissapointed ..i bring my mac to experrt and he reset my mac to the original version 10.6.8 .. n seriously after it done.. the connection as i mentioned which annoyed me settled and it works like a charm.. when i try to check update my software ...it showned combined software for 10.6.8.. however i still afraid to update it.. i'm still in trauma...

Join CD tracks option NOT showing up in iTunes 11.4

Once again, Join CD tracks option refuses to show up when I am trying to import an audiobook CD. The tracks are sorted consecutively by track Name, I am selecting all the tracks, and the options menu upper right of the window does NOT show Join CD Tracks.
I have separately and together varied the following: toggled the compilation CD box off and on;
restarted iTunes;
switched from one CD to another in the same set;
change the 'type' from 'spoken & audio' to audiobooks to music to unclassifiable
and still no joy.
I have used Join Together to join tracks from Audiobooks but if starting from individual tracks, CD by CD, there are always a few chapters out of place. I need this first step to work.
Is there anywhere else to look for a variation to make the lost option reappear?

"The tracks are sorted consecutively by track Name"
You need to sort consecutively by track number for the Join Tracks option to be available.

Can't join CD tracks - no, not the usual problem

Help,
This is NOT the problem where the tracks are out of order so the Join CD Tracks is grayed out. It's a different problem.
I load audiobook CDs to play on my iPod - have been doing it for years.
I join the tracks so that each CD is only one entry in iTunes.
As of the last few days, when I try to join CD tracks, it says it's joining hundreds of tracks, and when I drag the joined tracks to my itunes folder it just chimes and refuses to copy.
In the past, the little drag icon would list the number of joined tracks (like 12), now it shows a number like 283. And it won't copy. I did a software update recently. Has something changed to this feature?
OSX 10.6.6
iTunes 10.2.1 (1)

Rebooted all macs to run off iTunes 9, a much better version of iTunes, and wouldn't you know, join tracks works just fine. Reinstalled 10.2 onto one of the computers and still get same software problem of joined tracks not importing. If you join the tracks in the middle of an album, and then import the entire album, only the tracks that fall after the joined tracks import and nothing else.
I suggest having a working version of iTunes like 9 on your computer for the joined tracks feature. I only use 10.2 now for uploading to ipad since apple is forcing paying customers to use that version for the ipad and other players because older more stable versions of itunes don't work with the new hardware. Choice is something that is disappearing with apple products. It's a shame.

How can I join 24bit tracks without ripping from CD?

I've begun to upgrade my library to 24 bit audio, and many of the albums I want to upgrade have tracks which should be "joined." But if I buy, say, Pink Floyd's Dark Side Of The Moon from HDTracks, and want to have each side play as one continuous track, I have to burn it to CD first, then rip it. Which reduces the audio back to 16 bit. I wish iTunes would start selling albums in 24 bit ALAC, but that's another issue. Does anyone know a way to join 24 tracks without burning to CD and ripping?
Thanks!

Mark Bradford wrote:
Yes, I suppose I could use Garage Band or Logic for that. Makes for a lot of work, though. I guess I was hoping for something easier. Thanks!
Hi Mark,
Up to you, of course, but as audio editing tasks go, stringing a few tracks end-to-end is relatively simple.
The other option is just to put the relevant tracks in a playlist in the desired order, make sure Crossfade is set to 0, and play them in a row. Try it and see whether the transitions come across as "good enough."

I cannot see toolbar with favourites, file etc so i cannot join any pages to my favourites. Where it's gone...?

I cannot see toolbar with favourites, file etc so i cannot join any pages to my favourites. Where it's gone...?

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

ORA-02047: cannot join the distributed transaction in progress

Hi All,
My requirement is to do COMMIT Transactions in BULK like 100 rows. I am doing update in Oracle and SQL Server both. Following statement update the SQL Server side:
v_sqlstr :=
'update JDETAIL set interfacedate = getdate() where company ='
|| v_company
|| ' and Recordnumber= '
|| TO_NUMBER (v_recordNumber)
|| ' COMMIT TRANSACTION';
num_rows :=
DBMS_HS_PASSTHROUGH.execute_immediate@ex_test (v_sqlstr);
After this I am calling Oracle Update Procedure . In Oracle UPDATE Procedure when I write AUTONOMOUS TRANSACTIONS AND Commit then it works fine BUT when I don't COMMIT which I don't want because I want to COMMIT in BATCHES then following error is thrown
ORA-02047: cannot join the distributed transaction in progress
Thanks

you can't put the commit transaction into a pasthrough statement.
Oracle Gateway starts the transaction, so you need to write the code in a way that allows the gateway to perform the commit. When doing a commit in a passhrough statement the gateway has no control over the committed data. Thus you get the error unless you start an autonomous transaction.
Why do you need to call the update in a pasthrough statement? Why not in a PL/SQl code block with a counter that commits after 100 rows?

Cannot "Combine CD Tracks" No Matter What!

I have read the discussion on the issue of iTunes suddenly not allowing you to "combine cd tracks." I read the article that outlined the "solution," however, I have always done everything as specified in those instructions, and none of that information was new to me. After about 6 weeks of faithful service, iTunes suddenly stopped allowing me to use the "join cd tracks" feature. Since buying the computer, I haven't installed any other applications or changed any settings. I have downloaded the latest OS and iTunes software, but that has not solved the problem. All of the arrows are pointing up in the iTunes window, all of the tracks are contiguous, and all of the tracks are selected when I try to join the tracks. I really need to solve this problem ASAP. Can anyone help? You would be a life saver.
Generic Alias

Did you select the very left column to sort the disk? Click again on the little triangle until track #1 is at top and the last track at the bottom.

Cannot Join Cd Tracks

Similar Messages

Maybe you are looking for