Cannot join network after ios update

After ios update i cannot join on my ipad network

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Can't connect to wifi network after iOS update

    Can't connect to wifi network after iOS update.

    This does not work in my case.
    Situation: we have wifi at home using WPA encryption.
    The iPod Touch 8GB connected seamless to this network and anything was ok. After some days i could no longer connect, the iPod told me "connection to network 'networkname here' failed". Deleting the network and reenter the (correct) passphrase was no help, but changing the SSID on the router was helpful: the iPod could connect again ... for several days.
    Now things stopped working again. Resetting network settings did not help either.
    The iPod can see the network, is asking me for the passphrase and after several seconds telling me: can't connect. On the router log i don't even see a dhcp request, but other laptops work fine with the same wifi network.
    That's a mess, i cannot and will not change the SSID every some days just to get the iPod working again.

  • Cannot activate iMessage after iOS update.

    Cannot activate iMessage after iOS update. "Activation unsuccessful" I cannot activate it.

    Have you updated your iOS to 5.1? Just confirming as it says "iPhone 4S, iOS 5.0.1" in your thread.
    Double check if you have credit in your mobile in order to activate iMessage.
    Turn iMessage off and on again, than turn off your phone (long press display off and on button) and slide to turn off. Turn your phone back on, enter your "Apple I.D" in the iMessage window and wait till it verifies everything.
    Tell us if it solves the issue.

  • HT4623 join network after software update

    I have updated my software when plugging into Itunes. My phone said that there were just a few more stepts the first is about my network (wifi) i have done this but it keeps coming up as a screen message as 'could not find the network" but it is the correct password and username. could hyou help me please i can't use my phone until it is done
    Thanks

    Added icon to side bar. All is well

  • Can't connect to wifi after IOS update.  Do you know a solution?

    Loaded the new update and now it is sporatic connections with the wi fi.  I have unplugged the router and all that, still no luck.  It will work normally very briefly, but only briefly after I unplug the router, etc.
    Do any of you have a solution to fix this?
    Thank you!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Unable to connect to wireless network after software update

    on updating the software on my Ipad 3 I am unable to connect to my office wireless network

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • IPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

    iPhone 5c voice dial cannot be disabled after software update. Is there any way around this?

    Hi! It seems you found a bug on iOS 7.1
    To disable Voice dials try this, (I saw in an iPhone website here in Brazil):
    1. Turn on Siri (settings > General > Siri)
    2. go to  (Settings >Passcode > Voice Dial) trust me, it appears now
    3. disable Voice Dial
    4. go back and disable Siri
    hope this could help you!!

  • No 3G connection on sprint network after IOS 7.0.2 upgrade.  Any fixes?

    Are there any know fixes for no longer having 3G connectivity on the Sprint network after IOS 7.0.2 upgrade?  Seems like the newest 7.0.3 update does not fix this issue.  Any help would be appreciated.

    Hi ernesto70,
    If you are having a No Service issue with your iPhone after a recent update, you may find the following article helpful:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    Regards,
    - Brenden

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • Blurr images after ios update

    Hi,
    is it true that after ios update some will experience blurred images for images previously existing in the iphone before the update? If so, what is the cause and resolution?
    thanks!

    by "using itunes to remove the photos" do you mean syncing an empty folder?
    No. With your phone connected, itunes running, just un-check all the photos/albums, currently on your phone, under the photos tab in itunes. Hit the apply/sync button. This will remove all the photos currently synced to your phone. Once complete, just sync them back.

  • HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

    I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

    Maybe this will help:
    Troubleshooting
    As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

  • How can I improve picture quality...now grainy after IOS update!

    How can I improve picture quality...now grainy after IOS update!

    Hello, dreamer5th. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I would recommend going through when experiencing this issue.  They are labeled for the iPhone; however, the steps also apply to your iPad.  Also, make sure to test the camera in well lighted conditions as this can affect picture quality. 
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    If the issue persists see the last section labeled Issue not resolved.
    Cheers,
    Jason H. 

  • Contact list deleted after ios update

    This is the craziest thing I ever imagined . My whole conytact list is gone after ios update ..

    This is not bug!
    Alas, in other Symbian smartphones I examined, the background in Contacts and background in theme are the same, and Nokia in firmware 110 for E71, E66 made the same causing inconvenience
    As for my opinion, previous always white background in Contacts looked better

  • I am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5

    i am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Lost network after kernel update

    Hi
    I have lost my network after kernel updating the kernel [2.6.35.7]
    I downgraded to kernel 2.6.35.6
    Serge

    krychle wrote:
    Hi,
    I'm just reporting that I had this issue today too. I rebooted my computer from Win7 to Arch64 and I was left without network. Also it doesn't work in windows after rebooting back. I thought that It is something with connection so I tried to recoonect cable and also tryied to swap it in switch/adsl gateway. It started working after several switches (not on 1st!) It looks like interface is repeating on and off. So I rebooted to Arch and it stops working again...
    I fixed it by reinstalling kernel26 package. But it is strange because it works yesterday, last thing what I did with kernel and modules was update of gc nvidia drivers... I don't know when I updated kernel last time
    I'm using same network driver as Karol - r8169
    lsmod | less
    mii                     3826  1 r8169
    I'm using this card as well.  I upgraded yesterday and I can't get wireless with WICD.  Windows and normal network daemon work fine.  I use kernel26.  What other info can I provide?  If a bug report needs to be filed, would it be WICD, kernel26 or other?
    Also, I forgot, but I'm not using normal Wicd, I'm using wicd-nogtk from AUR.  Krychle, are you using this also?
    Edit:  I think this has to do with the python update.  I updated wicd-nogtk and its good now.  I am online.
    Last edited by Anonymo (2010-10-19 18:10:23)

Maybe you are looking for

  • Capitalization of first character in a sentence

    Is there a 'switch' that should be turned on to ensure that the first character in a sentence or paragraph is automatically a capital letter?

  • Samsung syncmaster 2233

    Hi, I have bought a mac mini i5 and i have a problem with my display, I have a samsung syncmaster 2233 vga, I bought a mini port display to vga adapter but the computer doesn't recognize the native resolution, 1920x1080 anyone knows how can i fix thi

  • Using Project Siena to record a video and take a picture

    Hello: I have seen this question : http://social.technet.microsoft.com/Forums/en-US/9b5869df-669c-4d4b-a68f-400936fc9c2f/recording-video?forum=projectsiena This question was in January.Can I use the Camera visual to record a video in beta 3 now?On th

  • TCA Java APIs not able to validate input against LOOKUP table

    Hi there, I am using the TCA Java APIs to create new source system references like so: HzOrigSystemRefPub wrapper = new HzOrigSystemRefPub(); wrapper.createOrigSystemReference(connection, "T", record, x_return_status, x_msg_count, x_msg_data); The re

  • "Application opened for the first time" warning after every reboot

    Hello, I have a problem with Lion 10.7.5. The system does not remember that I already opened applications before. After every reboot, every time I open an application it displays the warning as if it's the first time I'm opening it. Anyone knows how