Cannot launch CF8 update1 on leopard

Clean install of CF8 update 1 on Leopard. Trying to get it to
work with the Apache version already installed with OSX 10.5.2.
Once installer is done the installer gives a message that the
coldfusion service is not running, the web server connectors did
not install successfully etc etc. I made sure that the apache
connectors were set as described in the installation guide. Trying
to launch the service from the terminal also fails.
The cfserverlog has the follwing entries:
/Applications/Coldfusion8/bin/coldfusion: line 59:
/Applications/ColdFusion8/runtime/bin/coldfusion8: Bad CPU type in
executable
I have spend a whole day trying every possible combination on
the CF installer with the same results. Very disappointing since we
have been waiting for the "leopard" CF version to come around and
yet same issues as before.
Any help would be greatly appreciated.
Thanks

OK, I just uninstalled/reinstalled CF8 to make sure I had
this right.
I am installing CF 8.0.1 64-bit on OS X 10.5.2 on a 2.4 GHz
Intel Core 2 Duo Macbook Pro.
Install CF as Server
Setup connector to Apache (located at /etc/apache2 for config
files)
No RDS
Don't start at system init
That's it. Install went through successfully and
configuration assistant came up at
http://127.0.0.1/CFIDE/administrator

Similar Messages

Cannot Launch Java Application

I have installed Leopard on my PowerBook and everything seems to be working ok - except I receive an error message box on my screen - Titled Cannot Launch Java Application and in the box it says
"Uncaught exception in main
method:java.lang.NoSuchMethodError:javax.security.sasl.Sasl.setSasIServerFactory (Ljavax/security/sasl/SasIServerFactor;)V" I click the quit button and the message goes away for a minute and pops back up.
I am not aware of any Java Application that is running. In fact it is always on the screen - even when no application is running. I have repaired permissions and restarted several times. It won't go away. It doesn't seem to interfere with anything - it's just annoying to have it always on my desk top. Anyone have any suggestions or experience this problem.
Jane

After seeing everyone's responses here, it's pretty clear that there's little rhyme or reason to our fixes.
If mine worked, it wouldn't have come back.
If the font thing worked, it would've worked for me (it didn't).
If any of these worked, Jane's would be fixed (I'm assuming it isn't, yet...).
Sounds like a Leopard glitch. Or, we're all running a certain program, my guess is most likely that start at startup, and that's triggering the thing.
My computer starts up with Butler, Quicksilver, and Yojimbo this whole time. Anyone else?
In the meantime, I'm going to shut these off and see if it still happens.

Mail cannot launch because it says Home Driectory is full? It is not full!!

Hi There:
I have two users on my computer and for some reason I cannot launch my mail program on one of them. Both users are listed as administrators and I have 2 hard drives installed using a firmtek controller card. The first drive where the OS is installed is an 80Bg drive with more than 57Gb available.
When I launch Mail on the first user ut says:
Mail cannot update your mailboxes becasue your Home Directory is full. You must free up space. Delete unnecessary files or documents. The thing is I have tons of space. The other user I can launch mail with no problems. I do have multiple mailboxes set up with the mail program that has the issues.
Please advise
Thanks
W

Hi Cyclops Images.
Corruption of ~/Library/Mail/Envelope Index is known to cause this bogus error message in Mail, even when there is enough space available on disk.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
It opens and then just crashes after a few seconds of white screen.
Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
Andreas

The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
So what we have:
1) Music app does not launch (white screen then close)
2) About screen crashes (I guess once it tries to calculate music space)
3) Spotlight does not show any results (no care what I set to search in in the preferences)
4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
5) Podcast app does not launch
I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
Things to try:
- reset all preferences and content
- reinstall ios7 with itunes from scratch
- switch to windows phone

I had this imac 27" two years ago,updated to snow leopard 10.6.8 and suddenly the imac shut down and able to start again from the beggining,i had the leopard 10.5.8 and my problem is i cannot re-installed my snow leopard.Do i have to update my old leopard

I had this imac 27" two years back(leopard 10.5.8) and no problem was encountered so far! (thanks 4that),i always made an update as far to snow leopard 10.6.8. Unfortunately when i did some application /downloading,the system was off and when i turn it On the logo of an apple only came.So what i did is to start all over again,now i am two years old back with Leo-10.5.8,My problem is i cannot install my snow leopard,it reads that i have to clean tha disc which i did and thru utility disc.Any help please and i really appreciate to every1 helping me to solve the problem.I will keep in touch.
Many thanks! - Angel

BTW,I purchased the SL by retail and originally installed for the first time in my IMAC 27" ,unfortunately during the upgrading of the system,suddenly it was totally gray.then off as it killed my imac.i switch it On but only the apple logo came and waiting for so long.I tried to start from the very beginning,installed the DVD installation that was originally came from imac..it works and i have now the latest version of Leopard 10.5.6...then .8 thru updates. My problem is i cannot re-install my SNOW LEOPARD that i purchased from retail store..proceeded to install in my imac but everytime it ends with 'FAILED-pls clean the disc" i did the cleaning but still the same,:installed failed!-The installer could not copy the necessary support file",i tried booting from the disc holding C down but no luck at all. Anybody can help me please. Many thanks ..

I cannot launch bridge from photoshop cc 2014

I cannot launch bridge from photoshop cc 2014

If you have downloaded and installed Bridge CC and it worked with Photoshop CC,
a common reason for this happening in CC 2014, is that you might have uninstalled Photoshop CC. If that's so, you need to reinstall Photoshop CC.
Gene

Cannot launch Java Report Panel

I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan

I am having the same problem and I don't see an answer here. I have uninstalled every instance of java and restarted my computer, then installed the one suggested here: Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine. (the Java Virtual Machine was a link). Restarted again, tried again, same error. On the sun page, I tested my java installation and it works fine. I have checked that java is enabled in both IE and Firefox and I still get this error in either browser. I am using Windows XP.
Upon comparing my computer with my coworker's java configurations, we found that she has a certificate called "Business Objects America" and I don't have that. Could that be the problem, and if so, where can I get that certificate? There was no active X question as I would have expected to see asking to run active X or not. I can't find any certificate downloads on your site at all.
Please advise ASAP because I need to use this Web Intelligence Reporting and I cannot get in.
Thank you.

After a download update 4.0, I cannot launch. Message says I need to reboot to complete a previous update. I rebooted 5 times to no avail. What now?

After a download update 4.0, I cannot launch. Message says I need to reboot to complete a previous update. I rebooted 5 times to no avail.I have tried searching for xpicleanup.dat to no avail as suggested. What now?

I was able to get live chat support to solve the problem in my post. It worked immediately. Here is what I was told to do. I needed to perform a clean installation Hopefully, it will work for you, too.
"To perform a clean installation, first close Firefox completely. (This chat window
must be closed if it's in Firefox) Then, rename "Mozilla Firefox" to "Old Firefox".
(On 32-bit Windows, this is C:\Program Files\. On x64 Windows, this is
"C:\Program Files (x86)". On Mac, Firefox is in /Applications) Finally, re-install
Firefox normally from http://www.firefox.com"
Since I had already downloaded 4.0, I just went to my download file after renaming the file and ran it.

Cannot launch Camera Raw in PSE 8

I have PSE 8 with the Camera Raw 6.2 plug-in. The program works perfect exept that I cannot launch the Camera Raw converter. When I open a RAW-file in the editor or via the organizer, then the file just opens in the Editor mode. No raw converter... I can make a full photo-edit in the Editor. But why can't I open the Raw-converter?

I am on vacation. I will get back to you when I am back.
All the best,
Lars

Cannot launch 10g Express Edition Home page

I have installed Oracle 10g Express Edition yesterday,but cannot launch the home page.My browser is Firefox.Following msg is displayed,
Unable to connect
Firefox can't establish a connection to the server at 127.0.0.1.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I have tried by disabling antivirus protection also.I am using Home Standalone PC.
Pls. help.
Trips

I have this same problem after installing Oracle Database 10g Express Edition in Windows XP Professional SP2. Here is the result of lsnrctl status:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
U:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 31-JAN-2007 12:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 31-JAN-2007 12:21:49
Uptime 0 days 0 hr. 24 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAARONSON.corp.company.com)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
U:\>
Here is the ouput of ipconfig:
U:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SAARONSON
Primary Dns Suffix . . . . . . . : corp.company.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.company.com
company.com
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.56.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.180.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont
roller
Physical Address. . . . . . . . . : 00-12-3F-57-D2-BD
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.11.230
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.10.3
DNS Servers . . . . . . . . . . . : 10.10.11.246
10.10.11.248
U:\>
Can you please advise what to do here?
Thanks,
-Seth
P.S. I edited the domain in the ipconfig to save just a little anonymity.

TS1702 Cannot launch the Black Law Dictionary on iPad2

I bought Black Law Dictionary from apps store, after installed it to my iPad2, I cannot launch it. I have disscussed with vendor technical team a month ago but they cannot solve the ploblem. Please suggest me what can i do? Do i have to claim money back and how??

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I cannot launch itunes.

Can someone assist me, with an itunes issue. I am using Windows XP on my PC and now all of a sudden during an upgrade, I got an error and now I cannot launch or locate it on my pc. I've tried to reinstalling in manually and it will not work.
Please advise some helpful tips. Thank you.

I've tried to reinstalling in manually and it will not work.
Do you get an error message when you try to reinstall iTunes? If so, what does it say? (Precise text, please.)

HT1926 I still cannot launch appl.???

I am totally lost. Not knowing I entered my MasterCard and it charged me for a game?? Or movie I did not want!! I thought I had to have a credit card to use I.Tunes. I cannot launch games for my family member? My husband and I thought it wanted our credit card on file to do anything on this apple I- pad. It is so frustrating. We are in the thought of returning this device to AT&T and call it a loss. Never again. It is only 4 weeks old February,10,2014 was date of purchase. We do not know why!! It gives us so many problems?and now a charge we did not even use any game???? Plz HELP!!! Mr.&Mrs. Jason Stoddard.....

Apple does not use Internet Explorer for Software Update and never has. If IE is launching when you try to run Software Update, there's clearly something amiss with your system. It's not likely an iTunes error since the Mac OS X Software Update doesn't work either, so I'd suggest you repost your question in the Mac OS X 10.3 area. You'll be more likely to get useful suggestions there. The easiest fix may be to do an Archive and Install reinstallation of Mac OS X 10.3, but someone else may know of a quicker fix.
And yes, as you've discovered, Microsoft dropped support for the Mac version of IE two years ago, and Apple hasn't included IE with Macs for quite a while now.
Regards.

Windows 2008 windows service cannot launch Adobe Reader

I created a windows service that receives pdf files in one folder and should print them opening adobe reader. In my PC with Windows 7 it works just fine but when the application is deployed in Windows 2008 R2 server then the windows service is not able to
launch Adobe Reader.
I searched on Internet and I found that it might be related to the Session 0 used by the services.
I tried multiple possible solutions without success.
Thank you in advance for any support with this issue

Hi,
Are there any related error messages logged?
If not, I suggest you use Process Monitor to find out why exactly Windows cannot launch Adobe Reader.
Process Monitor v3.1
https://technet.microsoft.com/en-us/sysinternals/bb896645?f=255&MSPPError=-2147217396
In addition, here is a troubleshooting link below for you:
Troubleshoot PDFs that won't open
https://helpx.adobe.com/acrobat/kb/cant-open-pdf.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

After upgrade CUOM/SM from 2.1 to 2.3, I cannot launch CUSM.

Dear Experts.
I recently upgraded CUOM with SM in same server from ver 2.1 to 2.3, and changed IP address and Hostname as well.
I am new to this Cisco management system, I have a few question and need your help.
1.     After upgrade, do I really need to re-register 1040 Censor by uploading new image ? is it compulsory after upgrade ?
2.     I did re-discover, but it took a lot time, is it normal behaviour to re-discover with 3 CCM, 3 GW and 1 Unity ?
3.     I have 1000 license and this l saw error message sometime saying that my license number is not enough.
        We have more than 1000 IP Phone, so is this number of 1000 license consumed by all IP phone ?
4.     After changing hostname and IP address, I cannot launch the CUSM from dash board, but can launch from CiscoWorks.
        I think I did all necessary step of changing IP address and hostname, but I don’t know why I cannot launch from dashboard.
       Can someone guide me how to correct this issue ?
Kindly help me on this issue, thanks in advance.
Jason

Hi and welcome to Discussions,
have you any non-Apple BootCamp Drivers installed or replaced, like for the graphics card for example ?
If so, the uninstall them, either through the 'Software'-Panel in the Control Panel or in the case of graphics card drivers with DriverSweeper http://www.guru3d.com/category/driversweeper/
Also, a checkdisk run http://en.wikipedia.org/wiki/CHKDSK might be helpful.
Regards
Stefan

Cannot launch CF8 update1 on leopard

Similar Messages

Maybe you are looking for