Cannot Launch InDesign

I have been getting this error message when trying to launch the program:
"Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folder....."
What should I do?

give your user account read/write permissions to the adobe preferences folder.

Similar Messages

Cannot launch indesign CS4

When i try to launch Indesign it will not open. This error code comes up: Cannot load the CompFontMgr.InDesignPlugin plug-in. It is dependent on the Text.InDesignPlugin plug-in, which failed to load. Please check documentation for the Text.InDesignPlugin plug-in.

have you tried rebooting?
Did you make any changes tot he computer since the last time you used ID?

Error 5 - CS4 - cannot launch InDesign

I installed Adobe Creative Suite today. It installed fine. I was then able to launch Photoshop and Illustrator, without any problem. But when I tried to launch InDesign, I got error message 5. The message says "A problem has been encountered which requires that you re-start your computer". I've restarted several times, but still get the same error message. Any suggestions as to how to get round this problem?

have you tried rebooting?
Did you make any changes tot he computer since the last time you used ID?

Unable to launch InDesign CC 2014

I get this message and cannot launch it. Is there a way to solve it?
Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders. Ensure that you have appropriate permissions and then restart Adobe InDesign.

see Cant launch new inDesign CC | Adobe Community

Cannot launch PE 9 on Mac

I cannot launch either Premiere Elements 9 ED or Photoshop Elements 9 ED after initial install on a Mac runnng OS X 10.5.8. I purchased both programs as a set, and neither of them will install. They just crash when I try to launch them after installation. The computer I am using is an iMac 5,1 with Intel Core 2 Duo, and (with Premiere elements 9.0 ED version installed) 63 GB of free space.
During the week since I purchased the program, I have never been able to launch PE 9 on this computer. I uninstalled and re-instlled, but same result.
This is the error message I get:
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x955caef1 ecx: 0x00000200 edx: 0x00000007
edi: 0x2cb0846c esi: 0xbfffb3bc ebp: 0xbfffb398 esp: 0xbfffb330
ss: 0x0000001f efl: 0x00010283 eip: 0x955cb013 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00000000
Any help would be much appreciated.
- David Fahy
Japanese, UC Davis

I installed the program itself and not the content disk. I have the boxed set (Educational version), which I purchased.
Other Adobe software on the computer: CS4 web premium (I think it is called): Bridge, Contribute, Device Central, Dreamweaver, Adobe Drive, Extension Manager, Fireworks, Flash, Illustrator, Photoshop, Soundbooth. All CS4. I have a CS3 version of InDesign. Also: Acrobat 9 Pro, Reader 9, Captivate 5, Media Encoder CS5. Also something called Adobe Digital Editions, and Adobe Media Player. Elements 9 Organizer is installed when I installed Premiere Elements 9.
- David Fahy

Mail cannot launch because it says Home Driectory is full? It is not full!!

Hi There:
I have two users on my computer and for some reason I cannot launch my mail program on one of them. Both users are listed as administrators and I have 2 hard drives installed using a firmtek controller card. The first drive where the OS is installed is an 80Bg drive with more than 57Gb available.
When I launch Mail on the first user ut says:
Mail cannot update your mailboxes becasue your Home Directory is full. You must free up space. Delete unnecessary files or documents. The thing is I have tons of space. The other user I can launch mail with no problems. I do have multiple mailboxes set up with the mail program that has the issues.
Please advise
Thanks
W

Hi Cyclops Images.
Corruption of ~/Library/Mail/Envelope Index is known to cause this bogus error message in Mail, even when there is enough space available on disk.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and making sure that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

How to resolve "Your Trial Has Expired" message when launching InDesign CS6

Hello, just joined the Creative Cloud via the "Free" option. The Adobe Application Manager downloaded and installed after which I was presented the list of Adobe Products which I could "Try" for the 30-day trial period. After installing InDesign CS6 for trial, I'm getting a "Your Trial has Expired" message when I launch InDesign C6.
My PC environment is: Windows 7 Pro - SP1 (x64 bit)
I do have Adobe Acrobat X installed (with Enfocus PitStop v10 plugin)
Any thoughts as to what is causing this error??
How do I resolve it??

Hi MickyRatz,
If the trial version indicates as being expired then it has expired. There is no way to extend the trial.
You can find more details at Adobe trial software expired early -http://helpx.adobe.com/x-productkb/global/trial-software-expired-early .html.

After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
It opens and then just crashes after a few seconds of white screen.
Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
Andreas

The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
So what we have:
1) Music app does not launch (white screen then close)
2) About screen crashes (I guess once it tries to calculate music space)
3) Spotlight does not show any results (no care what I set to search in in the preferences)
4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
5) Podcast app does not launch
I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
Things to try:
- reset all preferences and content
- reinstall ios7 with itunes from scratch
- switch to windows phone

Error when launching indesign trial cs5

When I've launched indesign. I'm getting this "error" message:
"The BUZZWORD ACCESS.APLN plug-in conflicts with BUZZWORD ACCESS.RPLN. Try removing one of the two plug-ins from the Plug-Ins folder and restart InDesign".
I coudn't find the files which I had to delete one from.
Does somebody know where to find these files? (I'm using windows 7)
greets,
Sjoerd

I found one of these in:
C:\Program Files (x86)\Adobe\Adobe InDesign CS5 Debug\Required\Buzzword Access.rpln
I couldn't find the apln version.
This might sound simple, why not just search your system for these files?
In Win7 just bring up a default file browser window and use the search box in the top right with the magnifying glass.
Also, it might be a good idea to re-install InDesign.

Error when launching indesign CC

When launching indesign CC a Windows error appears saying that there is an error and the program will close. I've delete all the fonts but the error appears the same... I have windows 8 and I've been using the trial version without problems until today when it has expired. I've just buyed the license and the error has appeared.

You may need to run the cleaner tool: CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3

I cannot launch bridge from photoshop cc 2014

I cannot launch bridge from photoshop cc 2014

If you have downloaded and installed Bridge CC and it worked with Photoshop CC,
a common reason for this happening in CC 2014, is that you might have uninstalled Photoshop CC. If that's so, you need to reinstall Photoshop CC.
Gene

Cannot launch Java Report Panel

I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig Buchanan

I am having the same problem and I don't see an answer here. I have uninstalled every instance of java and restarted my computer, then installed the one suggested here: Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine. (the Java Virtual Machine was a link). Restarted again, tried again, same error. On the sun page, I tested my java installation and it works fine. I have checked that java is enabled in both IE and Firefox and I still get this error in either browser. I am using Windows XP.
Upon comparing my computer with my coworker's java configurations, we found that she has a certificate called "Business Objects America" and I don't have that. Could that be the problem, and if so, where can I get that certificate? There was no active X question as I would have expected to see asking to run active X or not. I can't find any certificate downloads on your site at all.
Please advise ASAP because I need to use this Web Intelligence Reporting and I cannot get in.
Thank you.

After a download update 4.0, I cannot launch. Message says I need to reboot to complete a previous update. I rebooted 5 times to no avail. What now?

After a download update 4.0, I cannot launch. Message says I need to reboot to complete a previous update. I rebooted 5 times to no avail.I have tried searching for xpicleanup.dat to no avail as suggested. What now?

I was able to get live chat support to solve the problem in my post. It worked immediately. Here is what I was told to do. I needed to perform a clean installation Hopefully, it will work for you, too.
"To perform a clean installation, first close Firefox completely. (This chat window
must be closed if it's in Firefox) Then, rename "Mozilla Firefox" to "Old Firefox".
(On 32-bit Windows, this is C:\Program Files\. On x64 Windows, this is
"C:\Program Files (x86)". On Mac, Firefox is in /Applications) Finally, re-install
Firefox normally from http://www.firefox.com"
Since I had already downloaded 4.0, I just went to my download file after renaming the file and ran it.

Cannot launch Camera Raw in PSE 8

I have PSE 8 with the Camera Raw 6.2 plug-in. The program works perfect exept that I cannot launch the Camera Raw converter. When I open a RAW-file in the editor or via the organizer, then the file just opens in the Editor mode. No raw converter... I can make a full photo-edit in the Editor. But why can't I open the Raw-converter?

I am on vacation. I will get back to you when I am back.
All the best,
Lars

Cannot launch 10g Express Edition Home page

I have installed Oracle 10g Express Edition yesterday,but cannot launch the home page.My browser is Firefox.Following msg is displayed,
Unable to connect
Firefox can't establish a connection to the server at 127.0.0.1.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
I have tried by disabling antivirus protection also.I am using Home Standalone PC.
Pls. help.
Trips

I have this same problem after installing Oracle Database 10g Express Edition in Windows XP Professional SP2. Here is the result of lsnrctl status:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
U:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 31-JAN-2007 12:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 31-JAN-2007 12:21:49
Uptime 0 days 0 hr. 24 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SAARONSON.corp.company.com)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
U:\>
Here is the ouput of ipconfig:
U:\>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : SAARONSON
Primary Dns Suffix . . . . . . . : corp.company.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : corp.company.com
company.com
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.56.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for
VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.180.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Cont
roller
Physical Address. . . . . . . . . : 00-12-3F-57-D2-BD
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.10.11.230
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.10.10.3
DNS Servers . . . . . . . . . . . : 10.10.11.246
10.10.11.248
U:\>
Can you please advise what to do here?
Thanks,
-Seth
P.S. I edited the domain in the ipconfig to save just a little anonymity.

Cannot Launch InDesign

Similar Messages

Maybe you are looking for