Cannot launch Monitoring & Report Viewer
Hi everybody,
i just installed ACS 5.1.0.44 with the latest Patch on a VMWare virtual machine and installed the evaluation license.
Everything works fine except for the "Monitoring & Report Viewer"-Tab:
When i try to launch the Viewer, it opens a new browser-window/tab, which then again opens another (the same) window/tab, and so on and on. So there would be an infinite number of windows/tabs, if i wouldn't close them all real quickly. Same problem with any client and any browser.
I already deinstalled ACS 5.1 and tried ACS 5.2 on the same machine -> same problem.
Am i missing something? Did anybody experience the same issue?
Thanks in advance,
Sebastian Jessulat
HI Sebastian,
What operating system and broswer are you using? Please note the following OS/Browser combinations are supported by ACS 5.1.
Supported Web Client/Browser Platforms
ACS 5.1 supports the following Web Client/Browser Platforms:
•Windows XP Professional (Service Pack 2) and Windows Vista
–Internet Explorer version 6.x
–Internet Explorer version 7.x
–Mozilla Firefox version 3.x
•MAC OS 10.5
–Mozilla Firefox version 3.x
•Linux ReaHat (latest version)
–Mozilla FireFox version 3.x
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/device_support/sdt51.html#wp73725
Regards,
Steve.
Similar Messages
-
ACS 5.1 "Launch Monitoring & Report Viewer" not working
I'm trying to view the logs on the ACS server via the web interface. When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage". This happens on both Firefox and IE. The URL it's trying to load is this: https://x.x.x.x/acsadmin/ReportsRedirectorAction.do
These are relatively new boxes so I don't know if I missed some config bit somewhere to enable that utility or what.
Any insight would be appreciated.
Thanks,I had the issue in ACS 5.1 no patch and it was fixed after reboot and after applying patch three it didnt showed up. The only difference is i had a standalone ACS.Who is the log collector in your setup?
Let me know if you can apply patch here is the link for that :
http://www.cisco.com/cisco/software/release.html?mdfid=282773289&flowid=4409&softwareid=282766937&release=5.1.0.44&rellifecycle=&relind=AVAILABLE&reltype=latest
here is the procedure to apply patch 3 ( on both primary and secondary)
downlaod the file : 5-1-0-44-3.tar.gpg
and place the file in the FTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
then run this command :
acs patch install patch-name.tar.gpg repository repository-name
#Installing an ACS patch requires a restart of ACS services.
Would you like to continue? yes/no
Thanks
Waris Hussain. -
It's dos't work Launch Monitoring & Report Viewer
It doesn't work "Launch Monitoring & Report Viewer"
If i click Launch Monitoring & Report Viewer" , that 's show up " The monitoring and reports database is currently unavailable. Attempting to reconnect in 5 seconds. If problem persists, please contact your ACS administrator " this message...
where do i check on ACS 5.0 ?
Regards
Gangmo.ooooops..
reload the acs.. and database process is on..
It work well ....
Thanks... -
Launch Monitoring & Report Viewer URL
Hi,
is there a way to change the URL of Launch Monitoring & Report Viewer? I want to use the IP address of the ACS 5.2 and not the hostname.
thank you
FabrizioHI Sebastian,
What operating system and broswer are you using? Please note the following OS/Browser combinations are supported by ACS 5.1.
Supported Web Client/Browser Platforms
ACS 5.1 supports the following Web Client/Browser Platforms:
•Windows XP Professional (Service Pack 2) and Windows Vista
–Internet Explorer version 6.x
–Internet Explorer version 7.x
–Mozilla Firefox version 3.x
•MAC OS 10.5
–Mozilla Firefox version 3.x
•Linux ReaHat (latest version)
–Mozilla FireFox version 3.x
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/device_support/sdt51.html#wp73725
Regards,
Steve. -
Cannot launch Java Report Panel
I would like to use the 'Advanced' Web Intelligence editor.
Unfortunately, when I attempt to edit a WI report, I get a message that reads 'This software has already been installed on your computer. Would you like to reinstall it?'
If I allow the installation, Java 6, Update 3 is downloaded and installed. I restart the browser. Attempting to edit the WI report generates the installation message.
If I don't allow the installation, I get an error that reads 'Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine.'.
It never gets out of this installation loop.
At one point, the Advance editor worked, then something changed.
The Java Control Panel indicates that I have JRE versions 1.6.0_03 and 1.6.0._20 installed (in the Java Applet Runtime Settings). In addition, versions 1.4.2_04, 1.4.2_07, 1.4.2_12, and 1.6.0_03 are listed in the JNLP Runtime settings.
Any assistance is greatly appreciated.
Craig BuchananI am having the same problem and I don't see an answer here. I have uninstalled every instance of java and restarted my computer, then installed the one suggested here: Cannot launch Java Report Panel, please make sure you have installed a Java virtual machine. (the Java Virtual Machine was a link). Restarted again, tried again, same error. On the sun page, I tested my java installation and it works fine. I have checked that java is enabled in both IE and Firefox and I still get this error in either browser. I am using Windows XP.
Upon comparing my computer with my coworker's java configurations, we found that she has a certificate called "Business Objects America" and I don't have that. Could that be the problem, and if so, where can I get that certificate? There was no active X question as I would have expected to see asking to run active X or not. I can't find any certificate downloads on your site at all.
Please advise ASAP because I need to use this Web Intelligence Reporting and I cannot get in.
Thank you. -
Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL
Hi, I am deploying the monitoring reports in a single host different to FE or Backend
When I launch the wizard the installation fail with the message:
> Deploying Monitoring Reports... This might take a few minutes.
The Monitoring Database is using SQL instance "mendbsql3\ARCHLYNC2013".
The data source is using SQL instance "(local)\ARCHLYNC2013".
System.Runtime.InteropServices.COMException (0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException (0x800700A4)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()Cannot
get the ReportServerWebService URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"mendbsql3\ARCHLYNC2013", and that WMI is included on the exception list of firewall setting on the server that is running
Reporting Services.
I check the configuration of the reporting services configuration, all see OK. I probe the URL in the server that I want to configure like a monitoring reporter
and I can explorer and administrate the Reporting Services. The firewall into the servers is off.
Somebody else have this problem.
THX.Hi Lapatinogo
This is how I install Monitoring in my lab series.
http://lyncme.co.uk/microsoft-lync-server-2013/the-complete-home-lync-lab-part-3-installing-lync-2013-monitoring-and-lync-edge-server/
Navigate –> Lync Server –> Your Site –>
Lync Server 2013 –> Standard Edition Front End Servers –>
Your Server
Right Click –> Edit Properties –> Scroll Down to Monitoring
Tick Monitoring –> Press New –> Enter your
SQL Server FQDN –> Specify your instance –> Untick
This SQL instance is in mirroring relation (As stated in Part 1 you should already have a SQL Server with an instance available) –> Press
OK
Press OK –> Press Action –> Press
Topology –> Press Publish
Press Next
Press Next –> This should complete successfully –> Press
Finish
Launch Lync Deployment Wizard
Press Yes –> Click Deploy Monitoring Reports
Press Next
Press Specify a User Account and Password that has rights to the instance –> Press Next
Press Specify User Group (I will be using the default group) –> Press
Next
Press Finish
Launch the Lync Server Control Panel
Login with an account that is apart of the CSAdministrator
Click View Monitoring reports –> Click your SQL Server FQDN
You should now see the below window Successful deployment of Lync Monitoring -
Post Author: Farooque
CA Forum: Other
Hi,
I am using Crystal report viewer (Crviewer.dll) version 11.0.0.1282 to show crystal reports in my VB6 application. When we search for any text in a multipage report after the last find system shows a message "Crystal Report Viewer" "Text cannot be found in the report" and trows an unhandled error and closes the application. How can I fix this?
Please help
Thanks in advance.
Farooque. ([email protected])Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Cisco Secure ACS 5.4/Monitoring and Report Viewer - SNMP Settings
Hello Everyone.
I hope this is the right forum for my question.
We just purchased 8 1121 ACS 5.4 appliances. I have some familiarity with the older 1113 and 1120 appliances running ACS 4.2. So I have a lot to learn.
Right now I'm trying to understand the Monitoring and Report Viewer System Configuration. I set the SNMP V2 read comm. string to the same string I configured from the CLI.
etc-labacsb1-1/admin# show runn | inc snmp
snmp-server contact "ACS1121;XXXXX"
snmp-server location "B1 Lab"
snmp-server community XXXXXX ro
1) It was not the same string as configured on CLI. Does setting this give me access to query more than system type or server type MIB objects.
2) Can you provide an example? (for example to query a switch - snmpwalk -v 1 -c XXXXXX hostname 1.3.6.1.4.1.9.9.43)
3) What is the MIB object tree OID (1.3.6.1.4.1.9.???) for these ACS appliances?
Thanks in advance.
Ray Westphal
EHIthat's correct. here is what we have in ACS 5.4 for snmp.
ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
•SNMPv2-MIB
•RFC1213-MIB (MIB II)
•IF-MIB
•IP-MIB
•TCP-MIB
•UDP-MIB
•CISCO-CDP-MIB
•ENTITY-MIB
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
~BR
Jatin Katyal
**Do rate helpful posts** -
Report Viewer Version 11 - Cannot load assembly?
Hi,
We are using version 11 of Report Viewer to display .rdlc Reports within the application.
On Web Server 1 the Reports render fine.
On Web Server 2 an error is displayed stating "Failed to load assembly".
The difference between the servers is that Web Server 1 has Visual Studio 2012 installed so the dll's are in the GAC aswell as the bin folder of the application.
Web Server 2 does NOT have Visual Studio 2012 installed and the dll's are ONLY in the bin folder.
Web Server 2 is a Production server so I cannot install Visual Studio and as a result the gacutil is not available either as a result.
How can I get these three dll's into the GAC on Web Server 2 given that gacutil is not on the server?
The application checks the GAC first for the dll's eventhough they are in the bin folder?
Thanks,
SK.
CGHi NuTech,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual
Studio Editor. Based on your issue, I think that the issue is more Report control issue, so I suggest you can post this issue directly to
Visual Studio Report Controls forum, it will be better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
LVS Viewer: Cannot display the report
Dear All,
When I query the report in LVS Viewer, I didn't see any error message. The system said loading....then no report shows.
Does it mean I am missing some software on terminal server?
I installed LVS server on our DB server. I installer LVS client and viewer on our terminal server.
I have Windows server 2003 on both server. I have SQL2005, SAP8.8 PL08. Please advise. Thanks.
Regards,
YukaHi Maria,
Thanks for the reply.
Here are the records in LVS Table. I only copied one table here.
I installed the server and the client on the same PC. I cannot see anything from report viewer.
When I go C:\Program Files (x86)\SAP\SAP Business One LVS\Reports Output, I can see some TXT files. One file of each day. So I assume my server address is correct. I copied it from the config file of LVS. Then another assumption will be, the viewer of the report is incorrect. But I didn't see any error message to let me know what's wrong with it.
Thanks.
Regards,
Yuka
*****************************records in LVS (Table Name: CumLicenseInfo) *****************************
5 manager Professional 20100907 False False False True False False False
8 manager Professional 20100908 False False False True False False False
12 manager L.CRM or L.Financials or L.Logistics or Professional 20100910 True True True True True True True
16 manager Professional 20100914 False False False True False False False
21 manager L.CRM or L.Logistics or Professional 20100920 True False True True True True True
24 manager L.CRM or L.Financials or L.Logistics or Professional 20100921 True True True True True True True
29 manager Professional 20100928 False False False True False False False
32 manager Professional 20100929 False False False True False False False
36 manager L.Financials or Professional 20101001 False True False True True False True
41 manager Professional 20101004 False False False True False False False
44 manager L.Financials or Professional 20101005 False True False True True False True
48 manager Professional 20101012 False False False True False False False
50 manager Professional 20101014 False False False True False False False
55 manager Professional 20101018 False False False True False False False
58 manager Professional or (L.CRM and L.Financials) or (L.Financials and L.Logistics) 20101019 False False False True True False True
62 manager Professional or (L.Financials and L.Logistics) 20101029 False False False True False False True
NULL NULL NULL NULL NULL NULL NULL NULL NULL NULL NULL
******************************************The End**************************************
******************Txt file under C:\Program Files (x86)\SAP\SAP Business One LVS\Reports Output *****************
LVS Reports results 10/31/2010
Summary License Requirement Report
Usage Date From Usage Date To Number of Licenses Required Required License Type
9/7/2010 10/29/2010 1 Professional
Concurrent Access Report
Database Peak Access Date/Time Total Users
IB 10/14/2010 5:34:48 PM 1
SBODemoUS 10/12/2010 8:46:53 AM 1
SBODemoUS 9/17/2010 5:08:39 PM 1
HD 9/17/2010 5:08:26 PM 1
BH 9/17/2010 5:08:26 PM 1
SBODemoUS 9/14/2010 4:12:44 PM 1
HD 9/14/2010 4:12:30 PM 1
HD 9/3/2010 2:25:43 PM 1
BH 9/3/2010 11:51:36 AM 1
Zk 9/3/2010 8:36:57 AM 1
**********************************The End******************************************************* -
Customizing the Monitoring and Report Viewer - ACS 5.2
Is there a way to modify the columns shown in the monitoring and reporting viewer so that I can see all of the relevant columns in one screen, similar to the ACS 4.x view? I would like to view things at a glance, rather than having to click into each item. Thank you for your help in advance.
that's correct. here is what we have in ACS 5.4 for snmp.
ACS 5.4 supports Simple Network Management Protocol (SNMP) to provide logging services. The SNMP agent provides read-only SNMPv1 and SNMPv2c support. The supported MIBs include:
•SNMPv2-MIB
•RFC1213-MIB (MIB II)
•IF-MIB
•IP-MIB
•TCP-MIB
•UDP-MIB
•CISCO-CDP-MIB
•ENTITY-MIB
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/device_support/sdt54.html#wp71020
~BR
Jatin Katyal
**Do rate helpful posts** -
Problem with Crystal Report Viewer and Dual Monitors
Post Author: jtgoff
CA Forum: .NET
Hey Guys,
I'm running into another problem with the Crystal Report Viewer. Here's a little info before I get started, I'm developing a Windows App using WinForms in VS2005 and Crystal 11 Release 2. I'm referencing all the latest Crystal dlls from Service Pack 2 of Crystal 11 Release 2. The problem occurs when I drag my Windows Form that contains a Crystal Report Viewer onto my second monitor and try to scroll or resize it, when I try this the Report Document within the Viewer becomes glitchy, blocky, and un-readable. I drag it back onto my main monitor and perform the same actions and the Report appears perfectly fine. I notice this occurs after a number of Report Previews through my App. Initially when I start my App, I can drag the reports onto my second monitor and resize it and scroll through it no problem. However, after a number of Previews, I notice the problem occurs on my second monitor. This is a very strange bug that doesn't produce an error and appears to happen randomly. I was wondering if anyone has come across this problem, if so... Is there a solution for this?
Thanks in advance!You can update the parameters using Crystal Viewer 2008. I had the same problem with the "CHANGE" button being grayed out.
Go to your Report -> Select Expert -> and now you have three choices: Record, Group, Saved Data. Put your select statement using your parameters in the Saved Data only (remove it from Record if already there).
It works awesome and even works on dynamic parameters! -
Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow
I am trying to send a report via email with crystal reports, but i get the following error message:
"The following unexpected error occured while trying to send the report to MAPI: Overflow."
I am using Outlook 2010, Win 7 x64 bit.
Does anyone have any ideas or thoughts?Yes, it is a 3rd party app that opens Crystal Reports Viewer. Attached are the screen shots I get when try to send the report as an email.
-Dan -
Cannot launch Report Builder in SharePoint 2013
I am trying to launch report builder in SharePoint 2013 Library i have.
I am not able to launch the report builder.
In IE it doesn't do anything there is no activity.
in firefox and Chrome it downloads the application and gives followingerror in the attached image.
I have tried following this already still not able to work
1. Installed the report builder 2012
2. Ran this in command prompt :rundll32 dfshim CleanOnlineAppCache
3.tried in compatible version in IE with IE 9,8 still same
How can i launch the report builder from client machines.
But when i try to launch the application from the server itself then it runs fine. I am not able to run it from client machines
kukdaiHi,
According to your post, my understanding is that you could not launch report builder in the client machine.
Did you install the .Net 4.0 framework on your machine?
.Net 4.0 framework needed to be installed on each user's machine, you can install it, then check whether it works.
More information:
http://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
As this is the forum for SharePoint server on-premise, I’m not familiar with the Reporting service, for this issue, I recommend you can post a new question in the forum for SQL Server Reporting Services.
https://social.technet.microsoft.com/Forums/en-US/ac51a022-6173-4840-96b5-32119b132bb5/unable-to-launch-report-builder-30?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to Reporting Services.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Crystal reports Viewer: cannot amend the selection parameter
Hi, when I open a report in the report views (2008) it only shows me the data that was selected when I last amended the report in the "crystal reports basic 2008". I can see my parameter listed in the parameter panel, but the "change" button is greyed out. Any ideas?
Thanks in advance!
SimonCrystal reports Viewer is only a Viewer. That means you can not do any modifications to the report. Report opened by viewer is a read only version. Designer has to be used to amend your report.
Thanks,
Gordon
Maybe you are looking for
-
Restoring from Time Machine to an external hard drive
I had a hard drive crash on a MBP and am using DiskWarrior to try and recover it. DW has been running for over 48 hourse and says "speed reduced by disk malfunction: 3,177" (the number increases every few minutes) The DW folk tell me to give it an
-
Open cursor for a dynamic query
Hi, I'm using forms6i and db 10g I want to create a procedure like below PROCEDURE pop_cursor (generic_cur IN OUT gencurtyp, querystring varchar2) IS BEGIN OPEN generic_cur FOR querystring; END;where generic_cur is a Ref Curs
-
I've tried both drag and drop and the Robocopy command to copy files to a RDX drive (under Win 7 home and pro). It starts off fast anough (25MB/sec) but shortly slows down to something like 1.5 MB/sec. Just 35GB takes well more than 2 hours to copy.
-
Never mind I found it
-
Recommendation for storing/archiving AVCHD material
I'm sure this isn't a new question but after a bit of searching I still wasn't able to find it on this forum. I have one of the newish Sony consumer cameras with flash memory. I use Log and Transfer in FCE to import the footage and that's all good. H