Cannot launch SAP Transaction from Guided Procedures

I created a Callable Object that is linked to a SAP Transaction.
When I test it by Execute-ing, I got a browser prompt to Save or Cancel the "xxxxxxx.sapssd" file.
How can I get it to launch the SAP Transaction?
TIA.

Hi,
Kinldy ensure that you used the following process to create the Callable Object
- Select the Parent Folder to Create Callable Object in GP Design Time
- Click on 'Create Callable Object' in the Action Items for Gallery
- In the Create Callable Object Step, choose 'SAP Transaction' option under 'User Interface'
- Provide the Basic Data in Basic Data Section
- In 'Define Object' step, provide the SAP System name as created in the SLD. Mostly the Alias name is displayed in the list. Also provide the default Transaction you wanted to execute.
- In the 'Define Input' Section, you can optionally provide the input parameters. Leave it blank to make it simple.
- In the 'Set Configuration' section, check the 'Execute Immediately'
- Finally Finish and Open the Callable Object for testing.
Following the above process should help you launch the SAP Transaction in a separate browser window.
After verifying the above steps, should you still have a problem, then it would be helpful if you can provide the steps you followed in order to replicate the problem.
Thanks
Siva

Similar Messages

Launch SAP Transaction from UWL and decision views

Hi,
Q1:
we wan't to launch a SAP Transaction from the Universal Worklist. Does anyone know how to do this explicitly?
Q2:
I have tried to add decisions directly to a List View, i.e. with the reject and approve columns. The columns do appear, but the checkboxes are not visible. From the log I can see a warning "No Custom Attribute exists for item ...".
The three options do appear correctly when you go to the details view for the item, and I did apply the same values for the actions (1,2,3).
Does anyone know how to do this?
PS! I have read the How To document, but could not find the answer there, nor in this forum.
Thanks,
Mikkel

I did fix question 2 above.
Still don't have a solution on how to launch a SAP Transaction. XML transcript below:
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'>
<UWLConfiguration version="1.0">
     <ItemTypes>
          <ItemType name="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000131" connector="WebFlowConnector" defaultView="TripApprovalView" defaultAction="viewDetail" executionMode="pessimistic">
               <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS20000131" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
                    <Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
                    <Action name="3" userDecision="yes" handler="UserDecisionHandler"/>
               </Actions>
          </ItemType>
          <ItemType name="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000135" connector="WebFlowConnector" defaultView="TripCheckView" defaultAction="viewDetail" executionMode="pessimistic">
               <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS20000135" connector="WebFlowConnector"/>
               <Actions>
                    <Action name="1" userDecision="yes" handler="UserDecisionHandler"/>
                    <Action name="2" userDecision="yes" handler="UserDecisionHandler"/>
               </Actions>
          </ItemType>
          <ItemType name="uwl.task.webflow.SAP_R3_HumanResources_TS40007901" connector="WebFlowConnector" defaultView="TimeApprovalView" defaultAction="launchSAPAction" executionMode="pessimistic">
               <ItemTypeCriteria systemId="SAP_R3_HumanResources" externalType="TS40007901" connector="WebFlowConnector"/>
               <Actions>
                    
                    
               </Actions>
          </ItemType>
     </ItemTypes>
     <Views>
          <View name="TripApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000131" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate, approveCol, reviseCol, rejectCol" sortby="priority:descend, dueDate:ascend" tableDesign="ALTERNATING" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="both" referenceBundle="tasks">
               <Descriptions default="Approve Trip">
                    <ShortDescriptions>
                         <Description Language="no" Description="Godkjenning Reise"/>
                    </ShortDescriptions>
               </Descriptions>
               <DisplayAttributes>
                    <DisplayAttribute name="approveCol" type="radiobutton" actionRef="1" hAlign="CENTER">
                         <Descriptions default="Approve">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Godkjenn"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
                    <DisplayAttribute name="reviseCol" type="radiobutton" actionRef="2" hAlign="CENTER">
                         <Descriptions default="Revise">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Returner"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
                    <DisplayAttribute name="rejectCol" type="radiobutton" actionRef="3" hAlign="CENTER">
                         <Descriptions default="Reject">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Avvis"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
               </DisplayAttributes>
               <Actions>
                    
                    <Action name="submitUserDecisions" userDecision="yes" handler="UIActionHandler" referenceBundle="submit"/>
                    <Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
                         <Properties>
                              <Property name="type" value="button"/>
                              <Property name="onClick" value="onForceRefresh"/>
                         </Properties>
                    </Action>
               </Actions>
          </View>
          <View name="TripCheckView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.decision.SAP_R3_HumanResources_TS20000135" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate,approveCol,reviseCol" sortby="priority:descend, dueDate:ascend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top" referenceBundle="tasks">
               <Descriptions default="Check Trip">
                    <ShortDescriptions>
                         <Description Language="no" Description="Kontroller Reise"/>
                    </ShortDescriptions>
               </Descriptions>
               <DisplayAttributes>
                    <DisplayAttribute name="approveCol" type="checkbox" actionRef="1" hAlign="CENTER">
                         <Descriptions default="Approve">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Godkjenn"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
                    <DisplayAttribute name="reviseCol" type="checkbox" actionRef="2" hAlign="CENTER">
                         <Descriptions default="Revise">
                              <ShortDescriptions>
                                   <Description Language="no" Description="Returner"/>
                              </ShortDescriptions>
                         </Descriptions>
                    </DisplayAttribute>
               </DisplayAttributes>
               <Actions>
                    <Action name="submitUserDecisions" userDecision="no" handler="UIActionHandler" referenceBundle="submit"/>
                    <Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
                         <Properties>
                              <Property name="type" value="button"/>
                              <Property name="onClick" value="onForceRefresh"/>
                         </Properties>
                    </Action>
               </Actions>
          </View>
          <View name="TimeApprovalView" selectionMode="SINGLESELECT" width="98%" supportedItemTypes="uwl.task.webflow.SAP_R3_HumanResources_TS40007901" columnOrder="attachmentCount, detailIcon, subject, priority, creatorId, createdDate, dueDate" sortby="priority:descend, dueDate:ascend" tableDesign="STANDARD" visibleRowCount="10" headerVisible="yes" tableNavigationFooterVisible="yes" tableNavigationType="CUSTOMNAV" actionRef="" refresh="300" dueDateSevere="86400000" dueDateWarning="259200000" emphasizedItems="new" displayOnlyDefinedAttributes="yes" actionPosition="top" referenceBundle="tasks">
               <Descriptions default="Time Approval">
                    <ShortDescriptions>
                         <Description Language="no" Description="Godkjenning Tid"/>
                    </ShortDescriptions>
               </Descriptions>
               <Actions>
                    <Action name="submitUserDecisions" userDecision="no" handler="UIActionHandler" referenceBundle="submit"/>
                    <Action name="refresh" userDecision="no" handler="UIActionHandler" referenceBundle="refresh">
                         <Properties>
                              <Property name="type" value="button"/>
                              <Property name="onClick" value="onForceRefresh"/>
                         </Properties>
                    </Action>
               </Actions>
          </View>
     </Views>
</UWLConfiguration>

Calling SAP Transaction from BSP

I wonder whether it is possible to call SAP transaction from BSP application and pass to it some data; e.g., PO# when calling VA02?
The called transaction could appear in a separate MS IE Window (like in some Portal applications) or in SAP GUI.
Any help will be appreciated.
Thank you in advance

I have launched the Java SAPGui from BSP pages before. I used SNC so that the users were logged on via Single Sign On. I store the Java Gui in the Mime directory. You can force the startup transaction. Theorectically you could also Gui Scripting to try and control the Gui and force in the default value for your PO field. I have not tried that however. You will probably want to check the Service Marketplace for documents on the Gui Scripting. The following is the code from my BSP page to launch the Java Gui in the Browser as an applet:
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<HTML>
<HEAD>
<TITLE>SAPGUI for the Java Environment</TITLE>
<STYLE type="text/css">
      body { margin-left:0px; margin-right:0px; margin-top:0px; margin-bottom:0px; }
</STYLE>
</HEAD>
<BODY scroll="no">
<SCRIPT language="JavaScript">
// user configurable part starts here
var pluginurl         = '';
var scriptable     = 'true';
var codebase         = '.';
var jnlp           = 'platin.jnlp';
var keepalive      = 'true';
var frog           = 'true';
var trace          = '';
var tracefile      = '';
var connectionData = 'conn=/M/nts163/S/3620/G/SPACE/&tran=SE80&clnt=088&fast=true&sncon=true&sncname=p:[email protected]&sncqop=9';
// user configurable part ends here
// verify if Java Plugin as control in Internet Explorer or Java Plugin for Netscape or native JRE of browser must be used
var jre = 'control';
if(navigator.platform.indexOf("Mac") > -1)
   jre = 'native';
else if (navigator.appName.indexOf("Netscape") != -1)
   jre = 'plugin';
document.open();
switch (jre)
case 'control':
    document.writeln('<OBJECT CLASSID = "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"                               ');
    document.writeln('    ID       = "PlatinGUI"                                                                    ');
    document.writeln('    CODEBASE = "j2re-1_3_1_02-win-i.exe#Version=1,3,1,0"                             ');
    document.writeln('    WIDTH    = "100%"                                                 ');
    document.writeln('    HEIGHT   = "100%"                                                 ');
    document.writeln('    BORDER   = 0>                                                      ');
    document.writeln('<PARAM NAME = "TYPE"           VALUE = "application/x-java-applet;jpi-version=1.3.1">         ');
    document.writeln('<PARAM NAME = "SCRIPTABLE"     VALUE = "', scriptable,'">                                ');
    document.writeln('<PARAM NAME = "code"           VALUE = "com.sap.platin.GuiApplet2">                   ');
    document.writeln('<PARAM NAME = "codebase"       VALUE = "', codebase,'">                             ');
    document.writeln('<PARAM NAME = "jnlp"           VALUE = "', jnlp,'">                             ');
    document.writeln('<PARAM NAME = "archive"        VALUE = "GuiStartS.jar">                             ');
    document.writeln('<PARAM NAME = "keepalive"      VALUE = "', keepalive,'">                             ');
    document.writeln('<PARAM NAME = "frog"           VALUE = "', frog,'">                             ');
    document.writeln('<PARAM NAME = "trace"          VALUE = "', trace,'">                             ');
    document.writeln('<PARAM NAME = "tracefile"      VALUE = "', tracefile,'">        ');
    document.writeln('<PARAM NAME = "connectionData" VALUE = "', connectionData,'">                               ');
    document.writeln('                                                                ');
    document.writeln('This page requires a Sun Java Plugin 1.3 and a SAPGUI for Java to view.                      ');
    document.writeln('                                                                ');
    document.writeln('</OBJECT>                                                           ');
    break;
case 'plugin':
    document.writeln('<EMBED TYPE        = "application/x-java-applet;version=1.3"                         ');
    document.writeln('    PLUGINURL      = "', pluginurl,'"                                          ');
    document.writeln('    WIDTH          = "100%"                                            ');
    document.writeln('    HEIGHT         = "100%"                                             ');
    document.writeln('    ALIGN          = "BASELINE"                                                ');
    document.writeln('    code           = "com.sap.platin.GuiApplet2"                                      ');
    document.writeln('    codebase       = "', codebase,'"                                        ');
    document.writeln('    jnlp           = "', jnlp,'"                                                ');
    document.writeln('    archive        = "GuiStartS.jar"                                       ');
    document.writeln('    keepalive      = "', keepalive,'"                                       ');
    document.writeln('    frog           = "', frog,'"                                            ');
    document.writeln('    trace          = "', trace,'"                                            ');
    document.writeln('    tracefile      = "', tracefile,'"                                       ');
    document.writeln('    connectionData = "', connectionData,'"                                        ');
    document.writeln(' <NOEMBED>                                                      ');
    document.writeln(' </NOEMBED>                                                      ');
    document.writeln(' </EMBED>                                                              ');
    break;
case 'native':
    document.writeln('<APPLET CODEBASE = "', codebase,'"                                                           ');
    document.writeln('        ARCHIVE   = "GuiStartS.jar"                                                           ');
    document.writeln('        CODE      = "com.sap.platin.GuiApplet2"                                               ');
    document.writeln('        WIDTH     = "100%"                                                                    ');
    document.writeln('        HEIGHT    = "100%">                                                                   ');
    document.writeln('<PARAM NAME = "SCRIPTABLE"     VALUE = "', scriptable, '">                                    ');
    document.writeln('<PARAM NAME = "jnlp"           VALUE = "', jnlp, '">                                          ');
    document.writeln('<PARAM NAME = "keepalive"      VALUE = "', keepalive, '">                                     ');
    document.writeln('<PARAM NAME = "frog"           VALUE = "', frog, '">                                          ');
    document.writeln('<PARAM NAME = "trace"          VALUE = "', trace, '">                                         ');
    document.writeln('<PARAM NAME = "tracefile"      VALUE = "', tracefile, '">                                     ');
    document.writeln('<PARAM NAME = "connectionData" VALUE = "', connectionData, '">                                ');
    document.writeln('</APPLET>                                                                                ');
    break;
document.close();
</SCRIPT>
</BODY>
</HTML>

Calling SAP Transaction from WDA

Hi,
We have a peculiar requirement of calling SAP Standard Transaction from Web Dynpro ABAP.Well, we tried achieving this using the Transactional iview. On click of appropiate link/button in my applicaiton, I can call the Transactional iview. But the problem is, I could not pass on the data from WDA Application to Transactional iview. I need some inputs in handling such cases.
The case might look something similar to PCR's final updation(like after all approvals of PCRs, the final Administrator executes the workitem which in turn calls the Notification Maintenance and this in turn calls the PA40 passing the data from Adobe form(XML data) to PA40 txn. Like this, After all my approvals, I would like to call the SAP Transaction passing the data from WDA Application. Hope I am clear.
Regards
<i><b>Raja Sekhar</b></i>

Hi,
Maybe you can use the information from this blog to pass dynamic parameters to the SAP transaction iview which you call with the created URl
How to launch SAP transaction & pass parameters via URL
Dagfinn

Launching GUI transactions from BSP

Dear Gurus,
I have requirement to launch ECC Transaction from CRM Web Client UI. Now, i dont want ITS based version of ECC version but WIn GUI version. I found Wiki link below which suggests the steps however it does not work.
I have exactly same requirement in CRM 7.0 (Support Pack Level 5) and i implemented same steps as desribed in the article. However I am facing issues tha It first asks for the right applicaiton to open object, i choose SAP Applicaiton exe file but later it gives error -
Erro Statusing "C:\Users\windowsloginid\App Data\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\2DG74TFC\win_gui[1].sap'(rc=-2)"
Here win_gui is the name of .HTM page with flow logic. I copied all the code in Page Layout and i am also not able to debug this as breakpoint does not hit.
Please suggest as this is something really urgnet for me.
Thank you very much in advance!!!
http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebUI-LaunchingtransactionsinGUIforWindows

Hello,
I am able to launch GUI for Windows though SAPshortcut method. I am also able to pass the Tx type and sales area on VA21 screen and skipping the first screen. However Now I am facing issue to pass customer number on VA21. I am using KUAGV-KUNNR field to populate customer but it never works. KUAGV-KUNNR buffer is emplty even when i am passing this through shortcut.
Please suggest.

Is it possible to call std. SAP transaction from abap wd

Is it possible to call std. SAP transaction from abap wd so that transaction appears and work as in gui? Without portal ofcourse.
I know that using webgui and/or ITS it is possible so then it must be somehow possible....

Hi,
see Web Dynpro ABAP call transaction in the foreground and just carry out a simple search in this forum, then you'll find several threads with similar questions...
Regards, Heidi

Calling SAP transaction from WebDynpro

HI,
Could someone post a link as to how I may call a SAP transaction from a webdynpro.
Will this be an external call to R/3 or can i get it embedded in my dynpro.......
Tnks..

Hi,
You can call by creating external window method.
create LINK to URL or LINK TO ACTION according to requirement, for this. write code in onaction of that.
data: iv_url type string value 'http://<server>:<port>/sap/bc/gui/sap/its/webgui?~transaction=*se38 RS38M-PROGRAMM=rsparam;DYNP_OKCODE=SHOP'.
data: api_component type ref to if_wd_component,
          window_manager type ref to if_wd_window_manager,
          window type ref to if_wd_window.
api_component = wd_comp_controller->wd_get_api( ).
window_manager = api_component->get_window_manager( ).
window = window_manager->create_external_window(
                 url = iv_url
                 modal = abap_false ).
window->open( ).
Cheers,
Kris.

Triggering an SAP Transaction from Adobe Form

Hi all,
i wanna know if i can Trigger an SAP Transaction from an Adobe Form...
so that i can open the transaction like MM01, or VA01.
THx,
Guru

Hi Graham!
I have a similar problem in transaction CIC0 and the Sales summary tab in CRM.
I have created a new class and assigned it to a new fact sheet. One column in this fact sheet should be a hyperlink defined in the way that you have described.
When using method get_event_parameter I are not getting any data for the SAPEVENT parameters - I don't get the value, only the keys:
<a href="SAPEVENT:?OBJTYPE&OBJKEY>
How should I procced to assign an object type and object key to this SAPEVENT???
Would also be very nice if anyone could explain how to "call transaction" works.
Help understanding this would be very appreciated.
BR
Mattias

Run SAP transaction from Java?

I'm looking for answers for two questions:
1) Can I run an SAP transaction from Java & capture the result either in a file or table.. or any such structure?
2) Can I run an ABAP report directly from Java? and then capture the result as well? I realise that I can use the JCO to run any RFC enabled function module..? But what about a report itself.? Can I run the report behind an SAP transaction directly from Java?
I need this information urgently, and would appreciate any help on this.

Hi Deepika,
I think the requirement you have asked is quite complex and there is no solution as far as i have know.
You can use BAPI to run SAP Transactions for example BAPI_MATERIAL_DISPLAY will take you to MM03 transaction when you pass a valid material number to it.
When i searched for the same i ended up with no solution,
but got a good link which gave some idea
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296869_idx25_off25,00.html
Go through that link that might be helpful.
Thanks & Regards,
Kathir~

Call sap transaction from java

can anyone tell me how to call SAP transaction from JCO,
cheers
Ajay

Hi Ajay,
You should find or create functional module which covers your requrements.
Best regards, Maksim Rashchynski.

I have to block all SAP transaction from 2014-07-14 using SP

I have to block all SAP transaction from 2014-07-14 using SP. kindly help...

Hi,
You can not block all transaction in single transaction notification. I have created for Sale order and just change object code and table for all other transactions.
IF (@object_type = '17') and (@transaction_type IN (N'A'))
BEGIN
IF EXISTS (
SELECT A.DOCENTRY FROM ORDR A WHERE A.[DocDate] >='20140710'and a.DOCENTRY = @list_of_cols_val_tab_del)
BEGIN
Select @error = 10, @error_message = N'You are not authorize to add this Sales order'
END
END
Thanks & Regards,
Nagarajan

Execute SAP transaction from Outlook

Hi,
I want to know whether it is possible to open SAP transaction from out look or not. My scenario is when work item triggers from WF to Outlook, which carry a link to open SAP transaction directly from outlook. If it is possibli plz explain me in detail, what are the steps involved, if not what are the alternative solutions. We are working ECC5.0

Hi Shambu,
First, please remove your e-mail from your post as this is not according to forum guidelines.
It is possible to send a link to a transaction to outlook. It is similar to the executable attachments the extended notification and RSWUWFML2 create. You could check how they do it and reverse engineer for the transaction. But all the users need a SAPGui locally installed. This maybe a problem as the MAPI is used.
FYI the MAPI is no longer supported by SAP, it is not supported since release 4.7 I think. It has been replaced by RSWUWFML(2) which is being replaced by the extended notifications. I think there has been an article about it recently here on SDN.
Regards,
Martin

How to block sap transactions from particular date

how to block sap transactions from particular date

Hi
If it is G/L Account inactive means.
Go to => Financial => Chart of Account => Select the Account to be Blocked = > Account Details
You can found the Active and Inactive Parameters. You can Specify the date period you want to block.
If it is Business Partner Means
Go to Business partners => Select the Business partner you want to block.
You can find the Active and Inactive Parameters. You can Specify the date period you want to block.
If you want period means
Go to Administration => System Initialization => Posting period => Click the above period => Select the period status and Lock
With Regards
Balaji

How to execute SAP Transaction from cmd

Hi, Dear All,
How can we execute an SAP Transaction from the command prompt.
Your inputs are highly appreacited.
regards

Go to the command prompt (CMD) and change to the directory where the SAPGUI software is located. Then, run: sapgui <hostname> <instance> Example: sapgui sapprd 00 This is a very fast way to start a SAPGUI session against the indicated SAP system and instance number.
another way is to locate the file of logon pad
in my system it was at C:\WINDOWS\SAPwksta\setup\SAL
after that type saplogon.sal
It will take you to the logon pad.

Launch SAP logon from Portal

Hi,
I am planning to create some links in Portal that will launch SAP logon. Can you someone suggest how to achieve it.
Please note: I do not want to create transaction iView.
Thanks in advance.
Regards
Mukesh

Hi
try checking this,
seems helpful
How to launch SAP transaction & pass parameters via URL
Jo

Cannot launch SAP Transaction from Guided Procedures

Similar Messages

Maybe you are looking for