Cannot listen to recorded track

I am pretty much a novice with Garage Band. I do a weekly podcast during football season the last time was in Dec 2007. Last year I would record, then then I could listen to the track to edit, then add my opening and closing.
So last year I would finish recording, go back to the start and hit play. When I do that now is says its playing and I see the screen, but no sound. Mute it not on, I open ITUNES and the sound is working right.
What am I doing wrong??? HELP??

http://www.bulletsandbones.com/GB/GBFAQ.html#usecomputersspeakers

Similar Messages

Using Garageband and I cannot hear previously recorded tracks on headphones. Prefs are set to output on EMU0404 my audio device - this did work but now is not working.

I am using Garageband and I cannot hear the previously recorded tracks on my headphones. I am using an audio input/output device, EMU0404 - this was previously working fine but stopped. All cables check out OK and so does the unit - I have updated to the latest version of Garageband but this did not help. Any suggestion?

Hi Christoph,
I cannot see anything wrong with the EMU0404. This is what puzzels me ... Garageband looks OK - headphones are OK - EMU looks OK.
Thanks anyway
Paul

Supervisor cannot listen to agent

Hello Guyz,
I am having an issue with UCCX 8 where a supervisor can successfully record an agent but cannot listen the recording.
sound card is good. Any advice on how to troubleshoot this?
thanks in advance

Hi,
we need more details.
Like:
- Does the supervisor desire to listen all calls at once? (Not possible).
- What is the difference between the PC's and phones of the agent for whom the monitoring works and for those it does not? Like a different network interface card, or something on the CUCM?
G.

Why I have to mute Audio Voice Recording Track always in order to subdue the voice recorded when I want to solo other tracks, audio or midi for listening.The other audio tracks don't sound without being muted. Please advise how to deal with this .Thanks

Why I have to mute the Audio Voice recording track ( the first voice track ) always in order to sudue its recorded sound while I want to listen to other
tracks ( either audio or midi tracks ) in solo ?The other audio tracks with voice recording do not have to be muted in order not to interfere with other
tracks turned on solo. Can someone kindly explain this phenomenon and any way to fix this ?
Thanks
Dan

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

Listening while recording---dumb question?

I'm new to GB and kind of learning-as-I-go, but I can't seem to figure this out. This is my first recording, and I recorded an electric guitar track. I want to lay down a bass track but how do I listen to my guitar track while I'm playing bass? I'm seriously not a good enough musician to play bass to a silent track just looking at the waveform.
And on an unrelated note, even with Monitor On, I cannot hear my electric guitar through my computer speakers whole I'm playing (nor my headphones, for that matter).
Any help is appreciated!

can I listen to my recorded guitar track WHILE I record the bass track?
You absolutely can. Just record enable the bass track, hit record and as it records, the first Track and any other recorded Tracks will play (unless you mute them or solo the Track recording.)
btw, I don't think there's anyone out there who can really record only to a waveform. Although I sometimes watch it to help me stay on the beat.

Cannot listen to recordings

Hello,
We just implemented Cisco's Unified Contact Center Express 7.0 and upgraded to Call Manager 7.0.2(a) from Call Mgr. 4.0.
We have 8 workstations with cisco supervisor desktop and all seem to work fine. However, of the 8 there are 2 workstations where we cannot listen to any recordings. They are listed in the Supervisor Record Viewer and when the play button is hit it behaves as if the recording is playing, but there is no sound. We have checked the obvious (speakers plugged in, volume turned up, etc).
I have tried comparing phone settings in Call Mgr., tried uninstalling and reinstalling supervisor desktop and also made those users local admins on their machines. But I cannot get the recordings to play on these 2 workstations. I don't know if the problem is with the workstations themselves or if it is a CCM or IPCC issue. Any advice would be greatly appreciated.

Ok, I got our batch file to work. Basically it sets the following registry setting and runs the postinstall.exe file.
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}\0001]
"PreserveVlanInfoInRxPacket"="1"
We run into this on all of our Optiplex 320 machines. The NIC that is in them doesn't play nice with monitoring and recording until the PreservVlanInfoInRxPacket is set to 1 in the registry. Give it a shot. Don't forget to run postinstall.exe again.

I have purchased an album but cannot listen to it everytime it asks me about the password any assistance

I have purchased an album but cannot listen to it everytime it asks me about the password any assistance

Assuming these tracks come from the iTunes store and you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, don't hide from iTunes in the Cloud/iCloud if prompted, close and then reopen iTunes, go to the iTunes Store home page, click thePurchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085: iTunes in the Cloud and iTunes Match Availability
HT2519: Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Audigy 4/how do i preview track 1 while recording track 2. tha

good day, i just bought a audigy 4 (not the special edidtion with remote, etc..
my problem is when i open my production software (digital recorder--------
say i record the drums on track in multi rack view. when i unarm track and arm track 2 to say record a piano. Then when i press play to hear track 2 it plays the drums i recorded on track . the drums on track record on all my tracks. i had this problem with the soundcard that came with my pc, i think somebody said something about it was pretty cheap and didn't come with preview or something...........anyways i just bought a Soundblaster Audigy 4, well it's far from top of the line but it's a big upgrade for me, any know how i can fix this problem of track being recorded on all the tracks. It's important for me to be able to listen to previously recorded tracks while playing a new .
so does anybody know how and if Audigy 4 can do this? this is essential, i bought this soundcard for i could go from my hardware digital recorder to software digital recorder. if there's a way can someone give me exact instructions on how to do this.
'm using audigy 4 soundcard, 2.53 ghz intel celron, 40gb hard dri've, 52 mb of ram, and the recorders i'm using are cakewalk guitar pro and adobe audition. thanks

Just stop using "What U Hear" as a recording source. If you're using ASIO, the ASIO Mix L works like "What U Hear".
As recording source, use microphone for microphone and line-in (or AnalogMix()) for line-in sources.
For monitoring, there is a checkbox behind a tiny red plus sign in CT Surround Mixer (or behind advanced button in windows audio I/O controls) you may need to set (this setting and recording source selection from ct surround mixre/windows recording controls has no affect when you're using ASIO device driver mode in software).
jutapa

Listening while recording

Can I listen while I record my own voice, using a headset or a mic and headphones?

can I listen to my recorded guitar track WHILE I record the bass track?
You absolutely can. Just record enable the bass track, hit record and as it records, the first Track and any other recorded Tracks will play (unless you mute them or solo the Track recording.)
btw, I don't think there's anyone out there who can really record only to a waveform. Although I sometimes watch it to help me stay on the beat.

Cannot listen to itunes music after relocating it to a new computer, Help .....

I have replaced my computer and have moved my itunes music and playlists to the new computer, but I cannot listen to the music. I received a message that itunes cannot locate the file with the music. How can I find this? During the move I used my external hard drive, put the music and playlists on the hard drive and then retrieved them from the hard drive to the new computer, it looks like alll the playlists and music are there. Also, there is an exclamation point beside the songs. Where does itunes search for the file? Is there a specific place that Itunes looks for the file? I believe that I may have it in 'My Documents' file, should it be in 'My Music' or another file?
I use this music with my ipod to teach fitness classes, so I don't want to lose it all or have to replace it all. I also need to be able to syn this ipod nano to itunes to update any new music.
Since I have purchased most of this music from itunes, is it still accessible, as I have already paid for it once.
Anyone have any suggestions for me to try. Please.

The "missing file" thing happens if the file is no longer where iTunes expects to find it. The way that you've backed up and restored things might have caused iTunes to expect the files to be in the wrong location or layout.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive. Hopefully you can locate the track in question. If a section of your library hasn't been restored to the correct place then it might be possbile to move it now you know
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

What connectors do I need for my ipad so I can connect it to my apogee duet 2 interface essentially using the ipad as an instrument utilizing a few of the synth and drum machine apps to record tracks into Logic on my Mac?

Ok, so I completely feel like this is a stupid question for those of you already in the know and recording tracks onto your Computers DAW from instrument apps on the iPad and other i devices. I can not seem to find out exactly what connector or unit I need to be able to connect and use my ipad as a instrument to record tracks onto logic. I have an ipad2 that I want to connect to my apogee duet 2 interface which is obviously connected to my Mac. I know Logic comes with plenty of drum and synth options but I still want to be able to use beatmaker, jam up pro and the sunrizer synth apps on some of my tracks. I do have the camera conversion adaptors. So my question is, do I just run from the camera adapter in the ipad into the midi port on my apogee interface? (I'm new to and still learning about midi) Or is there a special 30 pin cable I need to get that runs from the ipad into the XLR or quarter inch in the break out cables on the apogee? I did find one cord out there that plugged into the ipad and had left and right XLR connectors but my duets break out cable only has two inputs each is their own channel. Also , if the cable I need isn't midi and does connect to the breakout cables, do I set it as an instrument or as a mic in the apogee software? Or am I completely way off base and needing something different all together. Any help would be much appreciated!
I have a fare amount of experience when it comes to recording, set up and the flow of standard instruments, using external hardware and plugins. But the last few weeks I spent a lot of time programming some great beats in beatmaker on my ipad and I want to track them into Logic. It seemed like no matter how I worded the questions when researching what I thought was and should be simple to figure it out, it just took me to answers I wasn't looking for. Thank you ahead of time. Like I said I'm just starting to get out of my comfort zone and learn about midi and the more digital side of things. So sorry about any ignorance concerning that side of things.

The new Apogee Duet for iPad and Mac, is compaible with iOS devices and includes a USB Midi input. This sounds like the perfect solution for your workflow.

I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...

I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?

I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?
Thanks in advance.

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

Error while querying - You cannot update this record

Hi all,
I have a builded a form and was successful when i enter the data. But when i query the form it is showing me the error FRM-14050 YOU CANNOT UPDATE THIS RECORD.
I have pre-insert, pre-update and pre-query triggers at block level.
In PRE_INSERT iam setting the property to insert allowed and true.
same way for pre-update and pre-query.
Can any one guide me.
Thanks
Sunil

Hi
check your fields name name and match with database fields.
vikas

How do I burn a recorded track, on logic pro?

How do I burn a recorded track, on logic pro?

Bad?
I am far from an expert at Logic, but I found making a .wav file or .MP3 file fairly easy.
Using the edit menj, I select all the tracts in my arrnage window. Having done that I bounce the selected tract to my audio hard drive, having named it.
I can then import that audio file and others into Itunes and then burn a list of compositions onto a CD.
There must be several variations on that process but that one works well for me.
David

Cannot listen to recorded track

Similar Messages

Maybe you are looking for