Cannot listen to Voicemails

Running iOS 7.0.3 (11B511) on an iPhone 5.
When Voicemails come in, they appear in the visual voicemail list, but show 0:00 as the lenght, and I cannot listen to them. If I restart, they appear with the correct length and I can therefore hear the message.
Anyone have any ideas?

Howdy Jonathan Hoch,
It sounds like you are unable to listen to your voicemail on the phone. I want to recommend these troubleshooting steps from the article named:
iPhone: Troubleshooting voicemail
http://support.apple.com/kb/TS4430
Restart your iPhone.
Check for a carrier settings update.
Update your iPhone to the latest version of iOS.
Ensure that your voice mailbox is set up properly. You can verify this by dialing your phone number from your iPhone.
Make sure that you have a good cellular network connection. You can verify this by seeing whether you can make an outgoing call.
Call your iPhone from another phone and attempt to leave yourself a voicemail.
Reset your network settings by tapping Settings > General > Reset > Reset Network Settings.
Contact your carrier and ensure your iPhone is properly configured with the voicemail feature on your plan.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

  • HT201365 just updated Iphone5 earlier today--cannot listen to voicemail messages now--what do I need to do?

    Since updating to IOS7 earlier today--am not able to open voicemail messages--how does it work now?  Nothing I pushed
    activated the message left for me.

    Hi Kathleen47Baker,
    Welcome to the Support Communities!
    The first thing I would suggest is to reset and/or restart your iPhone.
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Information regarding how to listen to you Voicemail messages are on page 46 of the same user guide above.
    Hope this information helps ...
    - Judy

  • I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

    I recently upgraded to iOS 7.0.3 and now my iPhone 4S will only sync purchased music to my phone from iTunes. Help! I have TONS of music that I have bought and burned to my computer, but cannot listen to it on my iPhone. This seems ridiculous!

    Also, it's taking FOREVER (over an hour) to sync my iPhone to iTunes...

  • I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?

    I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?
    Thanks in advance.

    Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
    Re: Everytime I close Itunes it loads back up

  • HT2458 Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

    Has anyone else who uses AT&T as their carrier been told if you cannot access your voicemail through your iPhone that there is no way to check your voicemails? This is an issue since I had to send my phone in for repair. Thank you

    You received incorrect information from AT&T.  You can indeed access your voicemail without your iPhone.
    Call AT&T at (800) 331-0500 (assuming you're in the U.S.).  This is a 24 hour a day, 7 day a week number.  Ask them how to access your voicemail.  Normally, you would just do this by dialing your number from another phone, typing "*" once your voicemail recording starts, and entering your password.  You don't know your password, so it's probably the last four digits of your phone number or perhaps the seven - or ten-digit phone number.  Let the AT&T person tell you.

  • I downloaded iTunes on my PC and it says I cannot listen to songs I've previously bought unless I enable it. How do I enable it?

    I downloaded iTunes on my PC and it says I cannot listen to songs I've previously bought unless I enable it. How do I enable it?

    Below the download link there's a text link that reads Get iTunes for Macintosh
    Click it and you can download the Mac version (DMG)

  • Cannot listen to music

    Hello, I am having a problem that I cannot solve. Firstly my blackberry model is 8900 and the version is v 3.2.33 (b3.5).  The problem started when I put on the phone it will write uncaught exception: a browser content provider for video/3gpp MIME type has already been registered with the browser. Once the phone is ready for use I cannot listen to music, I thought it was the memory card so I formatted the memory card but I later realized it wasn't the memory card because when I try to play the ringtone it is always writing unable to play content. Pls I need help
    Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.
    [Subject Title edited to reflect new topic.]

    Hi
    I think this link has the same problem you were having with a proposed solution (see below)
    http://supportforums.blackberry.com/t5/BlackBerry-​Bold-9700-smartphone/Uncaught-Exception-on-reboot/​...
    Good Luck
    Regards
    Hiren

  • Supervisor cannot listen to agent

    Hello Guyz,
    I am having an issue with UCCX 8 where a supervisor can successfully record an agent but cannot listen the recording.
    sound card is good. Any advice on how to troubleshoot this?
    thanks in advance

    Hi,
    we need more details.
    Like:
    - Does the supervisor desire to listen all calls at once? (Not possible).
    - What is the difference between the PC's and phones of the agent for whom the monitoring works and for those it does not? Like a different network interface card, or something on the CUCM?
    G.

  • Channel_setup_fwd_listener: cannot listen to port: 1158

    I want to access the Enterprise manager through.
    http://<IP Address>:1158/em/
    Because of firewall issue i used ssh to create the tunnel.
    But i gives an error.
    I do not undestand it very clearly and workaround for that.
    oracle@srv603484:~> ssh -fNL 1158:<IP Address>:1158 oracle@<IP Address>
    Password:
    bind: Address already in use
    channel_setup_fwd_listener: cannot listen to port: 1158
    Could not request local forwarding.
    Please help.
    Thanks,

    It seems this is a ssh tunnel issue. Try this:
    ssh -f user@<IP Address> -L 1158:<IP Address>:1158 -N

  • Cannot listen to recordings

    Hello,
    We just implemented Cisco's Unified Contact Center Express 7.0 and upgraded to Call Manager 7.0.2(a) from Call Mgr. 4.0.
    We have 8 workstations with cisco supervisor desktop and all seem to work fine. However, of the 8 there are 2 workstations where we cannot listen to any recordings. They are listed in the Supervisor Record Viewer and when the play button is hit it behaves as if the recording is playing, but there is no sound. We have checked the obvious (speakers plugged in, volume turned up, etc).
    I have tried comparing phone settings in Call Mgr., tried uninstalling and reinstalling supervisor desktop and also made those users local admins on their machines. But I cannot get the recordings to play on these 2 workstations. I don't know if the problem is with the workstations themselves or if it is a CCM or IPCC issue. Any advice would be greatly appreciated.

    Ok, I got our batch file to work. Basically it sets the following registry setting and runs the postinstall.exe file.
    [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}\0001]
    "PreserveVlanInfoInRxPacket"="1"
    We run into this on all of our Optiplex 320 machines. The NIC that is in them doesn't play nice with monitoring and recording until the PreservVlanInfoInRxPacket is set to 1 in the registry. Give it a shot. Don't forget to run postinstall.exe again.

  • Why would the phone give me the error "Cannot Connect to Voicemail"?

    Why would the phone give me the error "Cannot Connect to Voicemail"?  How do I get into my voicemail?  Is it a network problem?  Or is it a setting issue on the phone?
    Any help would be greatly appreciated.
    Alex

    Usually it indicates that your data network is unavailable. When you receive this message, does the phone say 3G or E next to the AT&amp;T service bars?
    I usually reset the phone by holding the sleep/wake button and home button for 10-15 seconds until the screen goes black and the Apple logo appears. That solves the problem for me when it occurs.
    Hope this helps!

  • Updated player and now cannot listen to internet radio stations - why ?

    Updated to 14.0.0.145 the other day and now cannot listen to internet radio stations that worked fine before updating ( WABC , WMAL , KSFO ) . Programs won't download . WMAL's podcast does work , though . No trouble with Youtube , etc...
    I have Windows 7 and IE 10 .
    Can anybody help ?
    Thanks in advance .

    Each updated version of Flash Player includes important security updates.  You really want to be running the latest version of Flash Player.
    I'm also able to play these streams with no problem.  Have you rebooted since you upgraded?  It's always a good first step for mysterious problems. 
    If that doesn't work, I'd Uninstall Flash Player | Windows and then do a fresh install from http://get.adobe.com/flashplayer before considering downgrading.  That's an unwise course of action.

  • Cannot listen to BBC radio

    I cannot listen to BBC radio - Error message "Flash not installed" I downloaded latest Adobe Flash Player but still no joy
    Operating System Windows 7
    McAfee virus protection

    What is your browser?  If IE:
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • Cannot listen or purchase songs under new layout of iTunes 9.0

    Under the new layout I cannot listen or purchase songs. Also the homepage is basically just blank with only the right column with top songs, albums showing. The bizarre thing is that all comes out fine with the pages that have kept the old layout such as iTunesU or some iMix (was even able to download a song). Any help to fix this? Thanks in advance.

    I am having the same problem and saw this in a previous thread -
    1. restored system to yesterday (before I'd attempted the whole update fiasco)
    2. backup itunes library
    3. used revo uninstaller for a complete uninstall
    4. restart
    5. run clean install off new installer download (even though logged in as admin, I also used the right click "run as Admin" option for good measure)
    And voila upgrade
    Yes, it's a pain, but it did work. My best guess is that something was corrupted during the first failed update attempt, which resulted in an incomplete uninstall, thus screwing up the clean install. But that's just speculation...
    I want to do this with mine but don’t know how to “restore system to yesterday”? let me know if you find out how?

  • I have purchased an album but cannot listen to it everytime it asks me about the password any assistance

    I have purchased an album but cannot listen to it everytime it asks me about the password any assistance

    Assuming these tracks come from the iTunes store and you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, don't hide from iTunes in the Cloud/iCloud if prompted, close and then reopen iTunes, go to the iTunes Store home page, click thePurchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
    See also:
    HT5085: iTunes in the Cloud and iTunes Match Availability
    HT2519: Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

Maybe you are looking for

  • Availability Check not working for Item Cat TANN or YG05 in Btch Split

    Currently working on implementing Automatic Batch Determination (BD) project and one fine piece is holding up the implementation (make or break for project). In our QA System:   - In inventory we have a quantity of 2 for a material: 1 in one batch an

  • HP Printers Don't Work Over Wifi

    With my two HP printers (Color LaserJet 2605dn and OfficeJet 7300) neither of my Macs with Lion or Mountain Lion can print to them when on Wifi. On a wired connection it works fine, but not on Wifi. When you try to print it just says cannot communica

  • Using a US iPad 2 in the UK

    I am thinking to buy an iPad 2 32GB wi-fi from the US and bring it to the UK. Can anyone tell me if the UK version of the extended power cable can be used on a US iPad 2. So will I be able to plug in my iPad using a 3 pin UK plug without effecting th

  • [WP8.1][C#]Why when I try to upload an Image with Windows Phone it uploads a random thing?

    I'm trying to upload an image from my Windows Store App (Windows Phone 8.1) to hosting (using PHP) but always when I "uploaded" the image, and I check its result the "image" it's a corrupted file. I think it's related to the byte array conversion but

  • Repeated dyld errors reported in sh.crash.log -- how fix?

    On trying to locate where my spare disk space on my boot drive had gone , I found ~user/Library/Logs/CrashReporter had a 274Mb sh.crash.log file...! This seems to entirely consist of repeated dyld error messages (see below). Can anyone suggest a culp