Cannot load a Applet using Weblogic6.1

I am unable to load an applet. My application/web server is weblogic6.1. The problem is i am unable to set the right codebase.
any ideas..on how to set codebase when using weblogic 6.1.. my applet class files are in
c:/bea/applications/myApp/WEB-INF/classes

thanx for the mail..
When this application was set as Default application, even though the applet class files were in /WEB-INF/classes, it worked.. but now this is no longer a default application and the applet throws classnotfound exception..
i guess i am missing some other settings ...
The applet needs to be publically accessible to the
client. Nothing in WEB-INF is going to be publically
accessible. You need to put the applet somewhere
else, such as where you'd normally put the referencing
HTML file.

Similar Messages

How to load an applet using custom classloader ?

Hi All,
How to load an applet using custom classloader rather than using default browsers classloader i.e AppletClassLoader usually ?
Regards,
Kumar.

I would guess that that would require two applets.
The first does nothing but create the custom class loader and then load the second applet.

Cannot load java applets in Safari

I have several accounts on my machine. In one, the one I use most of the time, Safari will not load java applets. I have checked preferences and compared with those set on the other accounts. They are the same, including enabling javva and javascript. I have removed the Safari plist. I have repaired permissions. I have reset safari, cleared history and caches, used Cocktail to clear caches. I have rebooted.
I set up a new test account and it works fine.
What's going on, and how do I cure it?

I will try the pram reset, though I am not confident of it since this problem affects only one account.
On the new account business. I note that when I set up a new account, before I launch safari, there are no files in the Library related to Safari. They are created on the first launch. If I delete them all, then they are recreated on another launch. What if, in the affected user directory, I exported the bookmarks and/or dragged the bookmarks file to the desktop. Then deleted all evidence of safari from the account. I should now have, in effect, a virgin install of safari. Launching it would create all of the necessary files and directories. If safari works with java applets, or does not, I can simply move the bookmarks back in and be no worse off than I was in the beginning.
Any serious fault with that? I am working at home today so cannot do this until I am in the office on Monday.

Cannot load the applet

Hello.
I am trying to use the j2re-1_4_1-win.exe, but it will not load all the way up. A new window will open, but the graphics do not load entirely, including the text fields, rendering the applet useless. I had my pc debugged, tried installing and uninstalling java ad nauseum, but still cannot run the applet. The progress bar will show that the applet is Done loading, but I never get to use it. I have tried using the applet on other machines and succeeded. Any advice? Anyone?

Determine what the actual error is. The Java Console will have this. In IE, use the Tools menu.

Problem in loading an applet using JRE 1.5

Hi,
I have an applet which is working fine under JRE 1.4, but the same applet failing to load by using JRE 1.5
Problem Description:
1. The images in the applet fails to load using JRE 1.5
2. The Username and Password text box are also failing to initialize.
Can anyone help me out in this.
Is there any code changes required ?

I wonder if you have the same problem as me... Maybe we can find a solution for us both, no need for me to open a new thread for this topic then...
I wrote an applet using Swing and compiled it using JavaSDK 1.4.x. I also installed the 1.4.x JRE for both of my test browsers. In Mozilla 1.1 the applet displays properly all the time. In IE6 SP1 it sometimes works as intended but sometimes the applet simply stops working, as per my Java Console somewhere after invoking the "start" method. Parts of the applet simply become gray and when I resize it - I have a JFrame in my applet - the whole JFrame becomes gray and does not respond to input nor it redraws itself. Shutting down IE does not close the JFrame(although the java console reports normal program termination and cleanup) and the only way to close it is through the task manager. I am using Windows 98SE btw.
Does it sound similiar to your problem? It happens ONLY with IE, not with Mozilla. Anybody has an idea on what it could be? I doubt there's an error in my code...

Cannot load an applet in a local file

With
Fedora Core 3
JDK 1.5.0_05
Firefox 1.0.7 or Appletviewer
I can load most applets loaded fron web sites. But I cannot load a simple file:
<html>
<head><title>diagnostics</title></head>
<body>
<h1>example applet1</h1>
<applet codebase="." code=Applet1" width=120 height=120>
</applet>
</body>
</html>
with a simple hello world applet like:
import java.awt.*;
import java.applet.*;
public class Applet1 extends Applet {
public void paint(Graphics g) {
g.drawString("Hello World", 10, 10);
Loading the page it reports a General exception:
java.lang.ClassNotFoundException: Applet1
Both files are in the same directory.
It happens both with firefox and appletviewer.
I would appreciate any help or feedback of similar behaviour.
Manchu.

I just let your code run in JCreator and I found 1 error in yout HTML code:
<applet codebase="." code="Applet1" width=120 height=120>(that is how the line should look like, corrected)

Appletviewer cannot load Swing Applet

Hi. there
I'm facing the problem that appleviewer cannot load
my swing applet.
Acctually, a few days ago, before I implemented Button Event Handling, appleviewer work properly.
But now It's not working.
java -verbose appletviewer jadmin.html
-> Exception in thread "main" java.lang.NoClassDefFoundError: appletviewer
I already reinstall JDK1.3 because I chaged java.policy file.
and then this is not a source-level problem, I put into source System.out.pritln(), but not printed.
This is my classpath and path.
[classpath]
.;C:\jdk1.3\jre\lib\rt.jar;C:\jdk1.3\lib\tools.jar;C:\jakarta-tomcat-3.2\lib\servlet.jar;C:\jkjdbc\jkjdbc.jar
[path]
.;C:\jdk1.3\bin;C:\jdk1.3\Jre\bin;C:\Program Files\Microsoft SDK for Java 4.0\Bin
Please Let me Know about it.
Thank you for reading.
p.s In Current source, several inner classes(event handling class), but appletviewer work properly with inner class prev. source that I mentioned.

Hi,
You don't have to call java to run the appletviewer. You'll onlyhave to run:
appletviewer jadmin.html
to make it work.
Regards,
Kurt.

Cannot load webpages. Using a PAC file under Airport Proxies?

Hi,
so I got home today from work and now I can only load certain webpages. I can load the apple homepage, and google, and also google search results will appear, but if i click on any of them, or try to enter another website Safari will say 'cannot find server'. I have compared my Airport settings with my brother's Macbook, also running on the same home wireless network, and the big difference is that whereas his 'Configure Proxies' setting under the 'Proxies' tab in Airport is set to 'Manually', mine is set to 'Using a PAC file'.
Of course I have tried to fix this problem by setting mine to 'Manually' as well, but even if i click 'OK' and "Apply', it seems to instantly revert.
In the meantime, skype is working, as is my RSS reader. Please can somebody give me some ideas as to what could be going wrong?
Thanks

Alternatively I set the router not to make its own connection and then make the PPPoE connection from the mac.
That is not the best way to use a router. It is better to use the router to make the connection and then let your mac and pc just get an ip from the router using dhcp.
Set your router to use alternative dns servers if your still having issues such as opendns.com

Discoverer Plus -- Cannot Load Java Applet after JRE upgrade to 6

Hi,
After our users upgrade Java Runtime Environment to version 6 Update 1, Discoverer Plus stops working, the applet is opened but does not load.
Uninstalling the update solves the problem.
I disabled the automatic upgrade of Sun JRE on a few machines, but we have over 100 users.
Did anyone else face the same issue and is there any patch for the Discoverer installation?
Thanks,
Vlad

Hi George
You can get the 10.1.2.2 patch (4960210) on MetaLink. Be warned though that this not a small patch. It is 1.6 GB in size and is a full upgrade of the 10.1.2.0.2 application server.
I had some interesting problems when I first starting patching up to 10.1.2.2. First of all, if you are using a Windows server, you need to make sure that there are no lowercase characters used in your computer name. I know this sounds crazy but 10.1.2.2 will fail on Windows if you have this. If you've already got lowercase names in your machine you can't simply change the machine name to upper case because your existing application server will stop working as it embeds the machine name into dozens of configuration and setup locations. None of the Microsoft applications care what you call the machine as they don't embed like this but Oracle does. You'll probably end up having to reinstall the application server. However, the good news is that this only affects Windows and only when you have lowercase characters in your machine name.
Secondly, also on Windows, make sure there are no spaces anywhere within any of the folder names from where you will be installing the patch. This is another cause of failure. Thus, don't put the patch on your Desktop as there are spaces in Documents and Settings!
Thirdly, and this can happen on all platforms, if you are using an Infrastructure database and it is at 10.1.0.4 or less you will need to upgrade that database to 10.1.0.5 before you start any of the application server upgrades. If you don't do this your upgrade will fail. The release notes for the patch clearly state this but because they are very large I missed this the first time round and - oops - failed upgrade.
By the way, it seems Oracle have also released a patch (5758865) , available on MetaLink, with the fix for IE7. This is a one-off patch and requires a password which means you will have to raise a service request and tell Oracle you are having trouble drilling in Viewer when using IE7. This patch is applicable whether you are using relational or OLAP modeling. It can only be installed on top of 10.1.2.2.
Best wishes
Michael

How can I load an applet using Java Plug-in?

I have written an applet and have tested with appletviewer, but I can't load it from a browser. Ghlin told me that I need to use Java Plug-in to load it. Please tell me how.

Click on the Products and API link at the top left of this page. Download the Java Plugin. Be sure to get the developers version. Inside that developer's version there is a tool called HTMLConverter. Run HTMLConverter on your HTML and it will modify the applet tag in such a way that if the user already has the Java Plugin then it will use it. IF not, then the user will be asked if he wants to download it.

Load Biometric applets using JCF Biometric API

I have an egate 32K card with a biometric (MOC) mask on it. I have sample applets from precise biometrics I would like to load on the card then capture fingerprint and verification. I'll appreciate any help with this.
Thanks

First of all you need to download the BioServer applet, which handles the card edge API (the communication between the SC and the card). This is done using the card toolkits (as Joseph described). After that you need a library that enables your host to grab fingerprint images and convert them into MOC templates. You can contact me directly for information of the different software packages, examples, etc.

I cannot load certain pages using FireFox i could days ago. Pages load fine IE.

I use google doc to link me to pages/spreadsheets for work, and i was accessing everything fine till 5 days ago. Now i am being redirected. I get a glimpse of the page/spreadsheet then it begins to redirect me with a blank screen. Disabled Java Add ons that were updated but this did not fix the issue. Attempted to view the pages in Internet Explorer and they loaded just fine. Co Workers are not having the same issue.

Already tried that before. I don't even have any software firewall currently active, and the hardware firewall in my router does not block individual applications. It blocks ports instead, by IP address. My Avast AV software does not have anything that blocks applications either, since there is no firewall aspect to it, just the anti-virus software. Likewise, my Spybot S&D has no blocking capability either.
I followed all the steps in the article titled "Firefox can't load websites but other browsers can" when I tried installing v24 and v25 last night, which included the steps from the article you posted above with regards to firewalls, as well as changing proxy settings, disabling IPv6 and DNS Prefetching, and resetting Firefox defaults from the troubleshooting page, which blew out all my settings, and still nothing.
I had tried all the steps I could find on these pages, which is why I thought I would post my issue, since I had run out of ideas. I even took a look at the info about the issue some people are getting where it works for them only if they are moving their mouse, but even moving my mouse didn't get any results for me.

[SOLVED?] Openbox+perlpanel - cannot load NotificationArea applet

Hi,
I installed perlpanel to work with my Openbox, and of course all dependencies required. I have NOT Gnome installed.
The provided NotificationArea applet does not load though, I am wondering if I am missing a dependency. This is the error message I get:
Can't locate Gtk2/TrayManager.pm in @INC (@INC contains: /usr/lib/perlpanel /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current . /home/stefano/.perlpanel/applets /usr/lib/perlpanel/PerlPanel/Applet) at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
BEGIN failed--compilation aborted at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
Compilation failed in require at (eval 24) line 1.
Any clue?
Thanks
gm
Last edited by gattu_marrudu (2010-01-11 20:52:43)

gattu_marrudu wrote:
Hi,
I installed perlpanel to work with my Openbox, and of course all dependencies required. I have NOT Gnome installed.
The provided NotificationArea applet does not load though, I am wondering if I am missing a dependency. This is the error message I get:
Can't locate Gtk2/TrayManager.pm in @INC (@INC contains: /usr/lib/perlpanel /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current . /home/stefano/.perlpanel/applets /usr/lib/perlpanel/PerlPanel/Applet) at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
BEGIN failed--compilation aborted at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
Compilation failed in require at (eval 24) line 1.
Any clue?
Thanks
gm
there maybe something wrong with line 21 /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm.

Cannot load Java applets

Okay. So I have been having trouble loading games from Pogo.com recently.
I can start to load the games, but they get stuck at "Loading Game".
How can I fix this?

Recently I investigated the issue with Safari and Java applets and my conclusion is that the problem is related to the browser rather than to the Java runtime: if you install Opera, everything should work. I recommend you to review this thread:
http://discussions.apple.com/thread.jspa?threadID=1921644&tstart=45
This is my discussion with some users regarding possible causes of the trouble and steps to eliminate it.

How to load an applet in card?

Hi everyone,
I use NetBeans and its JavaCard Simulator, protocol T = 0, and I am wandering how to load an applet using APDU tool instead of clicking on Run Projetc which do the mentioned thing. It would be helpfull if someone post ouptut and explain all used apdu commands.
Thanks,
Mare.

Here is the APDU trace:
Select Card Manager
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00
<= 6F 10 84 08 A0 00 00 00 03 00 00 00 A5 04 9F 65
    01 FF 90 00
Authenticate
cm> init-update 255
=> 80 50 00 00 08 09 41 55 62 DF F5 61 2B 00
<= 00 00 C6 D8 6A 1C B2 02 14 13 FF 02 00 00 93 73
    3A B8 2C 0F 8E A4 1D EF 84 60 77 12 90 00
cm> ext-auth plain
=> 84 82 00 00 10 B5 AA A8 E6 8B 73 57 F9 5D 37 6C
    D1 FE CF 56 32
<= 90 00
Install For Load
=> 80 E6 02 00 12 05 11 11 11 11 11 08 A0 00 00 00
    03 00 00 00 00 00 00 00
<= 00 90 00
Load Block 1
=> 80 E8 00 00 FF C4 82 01 65 01 00 1A DE CA FF ED
    02 02 04 00 01 05 11 11 11 11 11 0A 68 65 6C 6C
    6F 57 6F 72 6C 64 02 00 21 00 1A 00 21 00 0A 00
    0B 00 2A 00 0E 00 A1 00 0A 00 17 00 00 00 5A 02
    5A 00 00 00 00 00 00 01 01 00 04 00 0B 01 02 01
    07 A0 00 00 00 62 01 01 03 00 0A 01 06 11 11 11
    11 11 11 00 08 06 00 0E 00 00 00 80 03 00 FF 00
    07 01 00 00 00 1C 07 00 A1 00 01 10 18 8C 00 04
    7A 05 30 8F 00 09 3D 8C 00 02 18 1D 04 41 18 1D
    25 8B 00 03 7A 04 22 18 8B 00 07 60 03 7A 19 8B
    00 06 2D 1A 04 25 75 00 6D 00 06 00 00 00 1D 00
    01 00 2C 00 02 00 3B 00 40 00 4A 00 41 00 57 00
    42 00 62 19 8B 00 05 3B 19 03 1A 07 25 8B 00 08
    70 49 19 8B 00 05 3B 19 03 1A 07 25 8B 00 08 70
    3A 19 8B 00 05 3B 19 03 1A 07 25 8B 00 08 70 2B
    03 32 04 8D 00 00 32 1F 8D 00 01 70 1E 05 8D 00
    00 32 1F 8D 00
<= 00 90 00
Load other Blocks with 80 E8 00 xx ... which xx is the Block number
Load Last Block
=> 80 E8 80 01 6A 00 01 70 13 03 8D 00 00 32 1F 8D
    00 01 70 08 11 6D 00 8D 00 01 7A 08 00 0A 00 00
    00 00 00 00 00 00 00 00 05 00 2A 00 0A 06 80 08
    10 06 80 07 01 06 00 00 01 03 80 03 02 06 80 03
    00 03 80 0A 06 03 80 0A 01 03 80 03 03 03 80 0A
    08 01 00 02 00 09 00 17 00 00 00 13 05 06 04 0A
    07 07 25 09 06 09 06 09 08 05 06 05 06 05 08 00
<= 00 90 00
Install For Install
cm> install -i 111111111111 -q C9#() 1111111111 111111111111
=> 80 E6 0C 00 1A 05 11 11 11 11 11 06 11 11 11 11
    11 11 06 11 11 11 11 11 11 01 00 02 C9 00 00 00
<= 90 00Note that if you want to use APDU manually, you should do the authenticate process and loading all blocks of the CAP file yourself.
Note that this is the APDU for a real card that is executed in JCOP Environment. I think it should work for the simulators too except the authentication commands.

Cannot load a Applet using Weblogic6.1

Similar Messages

Maybe you are looking for