Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into serve

Dear All,
Getting following error while trying to start http server service.
"Syntax error on line 1 of d:\oracle\oracle\apache\apache\conf\mod_ose.conf
Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into server"
Pls tell me the work arounds.
Thanks,
Sathis.

I am getting the same error message on my side.
Were you able to get around the problem? Thank you.

Similar Messages

Cannot load /usr/local/Zend/Core/modules/apache-eapi/libphp5.so into server

Hello All.
I download and install Zend Core for Oracle v.1 Linux x86-64 on
Linux Server (2.6.9-42.0.3.ELsmp #1 SMP x86_64 x86_64 x86_64 GNU/Linux) and on the server I have Oracle Application Server 10g (1.2.0.2). I have the SELINUX=disable in the /etc/selinux/config and LD_LIBRARY_PATH= /usr/local/Zend/Core/lib/
But when I start the midtier HTTPS I get the following error and not loading libphp5.so.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3203)
failed to start a managed process after the maximum retry limit
Log:
/oracle/ias/mid10g1202/opmn/logs/HTTP_Server~1
the HTTP_Server~1 log file contains this error message.
/oracle/ias/mid10g1202/Apache/Apache/bin/apachectl start: execing httpd
Syntax error on line 1095 of /oracle/ias/mid10g1202/Apache/Apache/conf/httpd.conf:
Cannot load /usr/local/Zend/Core/modules/apache-eapi/libphp5.so into server: /usr/local/Zend/Core/modules/apache-eapi/libphp5.so: cannot open shared object file: No such file or directory
Every thing fine when remove this line from httpd.conf file
LoadModule php5_module /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
help please.

some info about the libphp5.so on the server.
uname -a
Linux web3 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:24:31 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
ls -l /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
-rwxr-xr-x 1 root root 5731064 Nov 19 16:25 /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
md5sum /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
e1b7ae62abb0989cc3e8600f0641095b /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
file /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
/usr/local/Zend/Core/modules/apache-eapi/libphp5.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), stripped
ldd /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
libcrypt.so.1 => /lib64/libcrypt.so.1 (0x0000002a95bf4000)
libz.so => /usr/local/Zend/Core/lib/libz.so (0x0000002a95d28000)
libssl.so.0.9.8 => /usr/local/Zend/Core/lib/libssl.so.0.9.8 (0x0000002a95e41000)
libcrypto.so.0.9.8 => /usr/local/Zend/Core/lib/libcrypto.so.0.9.8 (0x0000002a95f9d000)
libresolv.so.2 => /lib64/libresolv.so.2 (0x0000002a9626a000)
libimf.so => /usr/local/Zend/Core/lib/libimf.so (0x0000002a9637f000)
libm.so.6 => /lib64/tls/libm.so.6 (0x0000002a966e8000)
libnsl.so.1 => /lib64/libnsl.so.1 (0x0000002a9686e000)
libxml2.so.2 => /usr/local/Zend/Core/lib/libxml2.so.2 (0x0000002a96985000)
libiconv.so.2 => /usr/local/Zend/Core/lib/libiconv.so.2 (0x0000002a96c82000)
libsvml.so => /usr/local/Zend/Core/lib/libsvml.so (0x0000002a96e66000)
libirc.so => /usr/local/Zend/Core/lib/libirc.so (0x0000002a96fa9000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x0000002a970eb000)
libc.so.6 => /lib64/tls/libc.so.6 (0x0000002a971f6000)
libdl.so.2 => /lib64/libdl.so.2 (0x0000002a9742a000)
/lib64/ld-linux-x86-64.so.2 (0x000000552aaaa000)

Cannot Load modplsql.dll into server

Hi all,
I am unable to get the Oracle Forms and reports running because I cannot get the OC4J started. The OC4J is in an Oracle Application Server Environment.
I have gone into 'ORACLE_HOME/opmn/bin' directory and excuted 'opmnctl startall'
But I always get the following error:
11/08/23 11:35:01 Start process
Syntax error on line 9 of c:/oracle/frhome_1/apache/modplsql/conf/plsql.conf:
Cannot load c:/oracle/frhome_1/bin/modplsql.dll into server: (126) The specified module could not be found:
The have followed the path and modplsql.dll does not exist. I cannot find this file anywhere, i have searched the whole of C drive. I don’t know what to do to get OC4J started.
I should tell you the domians have been changed which is one of the reason for all of these problems. i have changed the domain names in all config files by searching for the old domain name. The listeners and tsnames have all benn changed. The database server is now up and running and i can connect to it from the application server using SQLPlus. But Oracle Forms and Reports fails to start.
I have tried to run the Enterprise manager but that never starts. 'Internet Explorer cannot find webpage' always gets displayed. This is true for both the database and Application servers. (Database and Forms and reports are installed to two different servers)
The truth is I don’t know much about Oracle. I am trying to get this up and running after this company moved locations.
Please help me. Any help will be greatly appreciated.
Kindest regards,
Imran

I too have this problem. Did you solve it? How?

Cannot load Itunes in my PC getting message msvrcr80.dll missing

Cannot load Itunes in my PC getting message msvrcr80.dll missing

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99392)

Cannot load external Oracle JDBC driver in JEE5 server

Hi experts,
I installed CE 7.1 SP3 downloaded from SDN. I developed a EJB using JPA and wanted to connect an external Oracle 10 database. I firstly tried to create a JDBC driver resource in NetWeaver Adminstrator (nwa). The nwa page showed that load the ojdbc14.jar successfully. But when I checked the status on the nwa page, it shows that the status is unknown.
Any idea? Thanks in advance.
Regards,
Ken

Hi Ken,
> Both drivers doesn't working with 'Open SQL'. I get
> the message "you must register your tables using
> JDDI'.
Open SQL works on a logical database catalog called Java Dictionary. Therefore, Open SQL requires that all database tables are created through the Java Dictionary.
Please use the table editor contained in the Java Dictionary Perspective of the NWDS. You create the database tables by deploying a Dictionary archive.
Best Regards,
Adrian

Cannot load apachemoduleperl.dll

Hi,
I installed oracle 91 on my windows XP professional system. Istallation seemed to be ok, but i cannot start my Apache HTTP-server. This is the error:
Syntax error on line 218 of c:/oracle/ora92/apache/apache/conf/httpd.conf:
Cannot load c:/oracle/ora92/apache/apache/modules/apachemoduleperl.dll into serv
er: (193)
Could you please advise me what to do with this issue?
Kind Regards,
Martijn van Hagen

Hi,
If you don't need of the module perl you must comment the line of module perl in the httpd.conf. In this file there are two line for module perl (search string "perl" in httpd.conf)... you must to append "#" at the start of the line.
Mauro

Cannot load libamapc2.so

I am installing policy agent 2.2 for apache web server 2.0.52, after the installation, I get the following error while trying to start apache web server:
Cannot load /policyagent/agents/apache/lib/libamapc2.so into server: /policyagent/agents/apache/lib/libamapc2.so: undefined symbol: ZNSt24_default_alloc_templateILb1ELi0EE12_S_free_listE
Any ideas?

Are you using the version of Apache that comes with Solaris?
A caution note in chapter 3 of Sun Java System Access Manager Policy Agent 2.2 Guide for Apache HTTP Server 2.0.54 says that version of
Apache is incomplete. Below is the link below that is the entire caution note:
http://docs.sun.com/app/docs/doc/819-4770/6n6ta765h?a=view
Do not use the version of Apache HTTP Server that comes bundled with SolarisTM 9 Operating System or with Solaris 10 Operating System. The bundled Apache HTTP Server package is incomplete. Any attempt to Install Agent for Apache HTTP Server on a bundled version of Apache HTTP Server is likely to fail.
Therefore, download the desired version of Apache HTTP Server from the Apache web site at http://www.apache.org/ before attempting to install the agent.
______________________________

Could not load libamapc2.dll into apache server 2.0.54

My environment is
JES Access Manager 2005Q4 on Solaris 9 sparc
Apache web server 2.0.54 on Windows 2003 Enterprise
Policy agent 2.2 on Windows 2003 Enterprise Edition to protect my Apache web server 2.0.54
after i install the Policy agent and config it. i start my apache and got following information
Syntax error on line 1 of :/Sun/Access_Manager/Agents/2.2/apache/config/apache_
80/dsame.conf:
Cannot load C:/Sun/Access_Manager/Agents/2.2/apache/bin/libamapc2.dll into serve
r: The specified module could not be found.
my dsame.conf is
LoadModule dsame_module C:\Sun\Access_Manager\Agents\2.2\apache\bin\libamapc2.dll
Agent_Config_File C:\Sun\Access_Manager\Agents\2.2\apache\config\apache_80\AMAgent.properties
i also chek the libamapc2.dll. it is in the "C:\Sun\Access_Manager\Agents\2.2\apache\bin\"
how can i solve the problem ?

I had this same error, but msvcp70.dll and msvcr70.dll were already in my system32 directory. I took care of the problem by modifying the PATH environment variable to position the "<agent_root>\bin" and "<agent_root>\apache\bin" entries before the system32 path entries.

Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
The server is brand new and it's a fresh install of Apache and ColdFusion 9.
Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
On closer examination of the Windows error log, I saw the following error:
The Apache service named reported the following error: >>>
httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
Any help would be much appreciated. I have spent hours trawling the Web for solutions.

I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
OK. Simple solution to this. I'll put it here for other peoples' reference.
To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
Hope this helps someone else out.

Oracle 9i Lite Mobile Server deploye Problem As Apache Module

I am trying to get the Oracle9i Lite Mobile Server run as a Module under Apache.
my platform is Linux 7.2, which of course is documented as an option.
I managed to install the mobile server and the following document is
the latest from ORACLE site. and is very useful.
http://technet.oracle.com/docs/products/lite/doc_library/release501/readme.htm#new
I have one problem to overcome the module to load in Apache
'libwtgapach.so'
is the required shared library.
This does not load due to following error,
Cannot load /var/ORACLE/mobile/server/bin/libwtgapach.so into server:
/var/ORACLE/mobile/server/bin/libwtgapach.so: undefined symbol:
ap_global_ctx
All the libraries can be resolved here is the ldd ( link map )
ldd libwtgapach.so
liborafc.so => /var/ORACLE/mobile/server/bin/liborafc.so (0x40007000)
libjvm.so => /var/ORACLE/jdk/jre/lib/i386/classic/libjvm.so
(0x4002a000) libhpi.so =>
/var/ORACLE/jdk/jre/lib/i386/green_threads/libhpi.so (0x400bd000)
libdl.so.2 => /lib/libdl.so.2 (0x400dd000)
libpthread.so.0 => /lib/i686/libpthread.so.0 (0x400e1000)
libstdc++-libc6.1-1.so.2 => /usr/lib/libstdc++-libc6.1-1.so.2
(0x400f7000)
libm.so.6 => /lib/i686/libm.so.6 (0x40139000)
libc.so.6 => /lib/i686/libc.so.6 (0x4015c000)
libnsl.so.1 => /lib/libnsl.so.1 (0x40297000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
I found this post explaining to recompile Apache
This actually means you installed mod_ssl as a DSO, but
. without rebuilding Apache with EAPI. Because EAPI is a
requirement for mod_ssl, you need an extra patched Apache
(containing the EAPI patches) and you have to build this
Apache with EAPI enabled (explicitly specify --enable-rule=EAPI
at the APACI command line).I recompiled apache with the following
./configure --prefix=/usr/local/ssl-apache/httpd-2.0.39
--enable-rule=EAPI ; make ; make install
I still get the same error when I try to load the module.Am I missing
something?
Any help is deeply appreciated.
-- ajith

Scott, I have yet to get WTG server to work as an NT service when loaded as an Apache module.
We've had to load it into a non-service based Apache server (one that runs from the command line in a MS-DOS prompt window). This is on XP Pro.
We've switched to running our WTG server on Linux.

Help debugging an Apache module compile

Has anyone every had any experience adding in modules to apache that use openssl?
We have had great luck installing this module in particular "mod_cosign" with Apache 1.3 standalone but we are having a heck of a time compiling it with OHS.
The module we are using is from:
http://webapps.itcs.umich.edu/cosign/index.php/Cosign_Wiki:Test_install_HOWTO#Compilation_and_Installation
We are compiling this with openssl-0.9.7e
And here is the error we get when we try to start apache
.../Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 245 of .../Apache/Apache/conf/httpd.conf:
Cannot load .../Apache/Apache/libexec/mod_cosign.so into server: ld.so.1: .../Apac
he/Apache/bin/httpd: fatal: relocation error: file .../Apache/Apache/libexec/mod_cosign.so: symbol RAND_bytes: referenc
ed symbol not found
I'm not sure what it is truly missing and why the "RAND_bytes" is missing. I know this is specific issue but I was hoping maybe somebody has some experience with other modules being compiled and help debugging them.
Thanks,
Justin

You should try with the latest apache 1.3.x version rather than with the 2.x version. The mobile server module that has been shipped has been tested with 1.3.x version. Hi! Summit,
Thanks for your good observation.
I already figured that and tried on
apache_1.3.27
I went through all te trouble to compile a EAPI enabled
Apache to fix the 'Symbol resolving problem'
Now I have the EAPI enabled ( pretty much ssl enabled ) Apache_1.3.27
Now when I load the module 'libwtgapach.so'
I get the following log ERRO entry in Apache and it never comes up.
Here is my ewrror log says.
OUCH: nested memory code, to 1 levels.
OUCH: nested memory code, to 1 levels.
OUCH: nested memory code, to 1 levels.
[Thu Nov 7 16:15:41 2002] [notice] Apache/1.3.27 (Unix) configured -- resuming normal operations
[Thu Nov 7 16:15:41 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Nov 7 16:16:07 2002] [notice] caught SIGTERM, shutting down
OUCH: nested memory code, to 1 levels.
OUCH: nested memory code, to 1 levels.
OUCH: nested memory code, to 1 levels.
This could still be due to a problem in the Shared Object 'libwtgapach.so' as without it the EAPI enaled Apache works fine.
This is very criutical for me to get the 'Mobile' project we are researching on to get going.
Any help is deeply appreciated, I am trying ORACLE with not much help.
One thing strange though, the olite_50200_linux.cpio distribution from ORACLE download page installation documentation does not even mention about the Apache Module Configuration detalis.
I presume it is implied as trivial.
OR
IS IT REALY SUPPORTED ?
-- ajith

Mod_wl.so "Thread Local Storage" load error with Apache and WL 7

I'm using Apache 1.3 and WL 7.0, and after configuring Apache to load mod_wl.so,
I get the following error when starting up. I'm using the mod_wl.so that is
for hpux11.
Thanks for any help.
$ ./apachectl start
/usr/lib/dld.sl: Can't shl_load() a library containing Thread Local Storage: /usr/lib/libcl.2
/usr/lib/dld.sl: Exec format error
Syntax error on line 1053 of /opt/apache/etc/httpd.conf:
Cannot load /opt/apache/lib/modules/mod_wl.so into server: Exec format error
./apachectl start: httpd could not be started

Sunny,
When you build apache on hpux, you should do the following before the
configure:
export CFLAGS="-lstd -lstream -lCsup -lm -lcl -ldld"
Regards,
Eric
"Sunny Yee" <[email protected]> wrote in message
news:[email protected]..
>
I'm using Apache 1.3 and WL 7.0, and after configuring Apache to loadmod_wl.so,
I get the following error when starting up. I'm using the mod_wl.so thatis
for hpux11.
Thanks for any help.
$ ./apachectl start
/usr/lib/dld.sl: Can't shl_load() a library containing Thread LocalStorage: /usr/lib/libcl.2
/usr/lib/dld.sl: Exec format error
Syntax error on line 1053 of /opt/apache/etc/httpd.conf:
Cannot load /opt/apache/lib/modules/mod_wl.so into server: Exec formaterror
/apachectl start: httpd could not be started

Apache start fails on Content server

Hi ,
I have installed Content server 6.40 on AIX 5.3 with Apache server 2.2.4
However after successful installation of MaxDB instance and Content Server
the apache fails to restart or stop and gives the below message:
./apachectl -k start
httpd: Syntax error on line 54 of /usr/users/sapcs/conf/httpd.conf: Cannot load
/usr/users/sapcs/modules/mod_sapcs2.o into server: \t0509-022 Cannot load module /usr/users/sapcs/modules/mod_sapcs2.o.\n\t0509-103 The module has an invalid magic number.
Are there are any modifications required for http.conf? I could not find much help on sap notes.
thanks in advance,
Murali

Hi,
Can u please provide more details on how you solved the problem?
We are facing the same problem , we are installing SAP content server 6.40 with apache 2.0.63.
Thanks,
Jay

Cannot load modplsql.dll on Win2k, 9iR2 (no iAS)

On Win2k, a fresh install of 9iR2 without iAS, starting HTTP server I get:
Syntax error on line 4 of d:/oracle/ora92/apache/modplsql/cfg/plsql.conf:
Cannot load d:/oracle/ora92/bin/modplsql.dll into server: (126) The specified module could not be found:
the path is valid, the dll is present.
the wv_gateway_cfg environment variable appears valid and the wdbsvr.app is present.
Commenting the load of modplsql.dll allows the service to start succesfully.
Can anybody help?

I too have this problem. Did you solve it? How?

Emca failed with "exec(): 0509-036 Cannot load program "

Hello all,
I try to configure dbconsole on on 10.2.0.4 an AIX 5.3.
It failed with this strange error :
Apr 22, 2011 2:43:25 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: exec(): 0509-036 Cannot load program oracle because of the following errors:
0509-130 Symbol resolution failed for /applics/ora10201/lib/libjox10.a[shr.o] because:
0509-136 Symbol ksptch_check (number 239) is not exported from
dependent module oracle.
0509-136 Symbol skptch_lcl_updnum (number 339) is not exported from
dependent module oracle.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Couldn't connect to the db. at /applics/ora10204/sysman/admin/scripts/emca/emcaDbUtil.pl line 85
I did "relink all", but the message still the same and of course spend a lot of time on google.com without success.
Does any one have any idea ?
Thanks in advance.

Goog remark of AllYourDataBase ! very good ! Why I didn't remark it by myself !!
Thanks also for the other repliers ...
But, I don't understand why emca call "/applics/ora10201/perl/bin/per" unstead "/applics/ora10204/perl/bin/perl" which exists ...
No vairables points on 10.0.
# env | grep 10201
--> No lines returned
# env | grep 10204 | wc -l
19
And my LIBPATH, LD_LIBRARY_PATH and PATH seems corrects :
LIBPATH=/applics/ora10204/lib:
LD_LIBRARY_PATH=/applics/ora10204/lib:/applics/ora10204/ctx/lib:/usr/lib:
PATH=/applics/ora10204/bin:/applics/ora10204/ctx/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/applics/ora10204/bin:/usr/bin/X11:/sbin:/expl/adm/shl:/applics/ora10204/OPatch:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/lbin
LOCPATH=/usr/lib/nls/loc
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
Why emca call perl from 10.2.0.1 software and how can I influence it to call it from the right directory 10.2.0.4
I continue to search by myself also.
Thanks of all.

Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into serve

Similar Messages

Maybe you are looking for