Cannot load driver for printer

got a new computer and cannot load my hp printer. it will not find driver

http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP Laserjet 4100N - Cannot Load Driver or Print

My Laserjet 4100N is on our LAN. We have never had any problems with it at all.
We installed Snow Leopard yesterday.
We now cannot get any of our Macs to print.
The only "driver" loaded: "ADOBE PDF 9.0-1"
When in the "Print & Fax" control panel, we try to add a printer, the "default" appears, which is "Adobe PDF 9.0-1."
When we try to choose "other" a list of drivers comes up. We select the proper driver, but nothing works.
The printer is configured for DHCP.
We do not understand the "IP" option at all.
The entire print & fax interface presents a cryptic mystery to the user, a la Windows. 10.5 was far better.
We are at a loss as to what to do.

Thank you, though this does seem a step backwards for Apple.
I mean, maybe they should have done away with Appletalk, I don't know, but I found nothing anywhere that told me that or that explained what any of the terminology in the "IP" printer setup meant, etc.
Also, my router currently assigns an IP address to the Printer via DHCP, which I've always found convenient. I guess that's all over with. Will Apple publish something that helps us non-techies through the process for each printer on a LAN?
Seems very Microsoft to me.

HT1338 I can't load driver for HP 6500A printer / scanner

I can't load driver for HP 6500A printer / scanner

What does that mean? Have you downloaded the drivers and to installed them? Have you tried adding the printer with the AirPrint Driver?

Problem down loading driver for All-in-one Printer

I tried to down load driver for HP Photosmart C4183 All-in-One on my laptop with OS Windows 7 Premium. During the process of installing each time it request me connecting the USB cable it gives a message that the driver am trying to install is faulty,I also tried it with my Toshiba note-book the same message appears. This is the first time am using this particular product. There some information on my computers Ineed to print ,I am only able to use the copier. Is there a way to repare the USB cable online,if it's the problem

i have a hpo deskjet printer f2180 but lost my disc how do i connect too my lap top

Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....

First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M.

LOADING PHOTOS FOR PRINTING

Two questions in 1.
When I try to load photos for printing to a commercial site (not Apple) I cannot find my albums in the menu. When I click on the albums folder under database there is nothing there. The only place I can find shows the photos in date order which is very laborious.
If I do load photos individually from the main library only the IMG description loads not my own added details. I have tried two separate suppliers but with the same result. When I used to upload from a PC the details would appear and come back printed on the reverse of the photo.
I cannot find any help menu item.

In the upload window use the media browser. In the extreme lower left hand corner under media ==> photos ==> iPhoto
LN

Cannot load driver COM.ibm.db2.jdbc.app.DB2Driver

Hi ,
I need help on this matter and will really appreciate.
I have installed Jdeveloper 11g and Weblogic 11gR1 on windows. I am trying to configure my weblogic server for JDBC-Datasourse to connect to DB2 and get this error.
cannot load driver COM.ibm.db2.jdbc.app.DB2Driver
This is how my classpath and path looks
classpath :.;C:\Program Files\JDEdwards\BPMBroker\JRE\1.3\lib\ext\QTJava.zip;C:\Program Files\Java\jdk1.6.0_20\lib\tools.jar;C:\Program Files\Java\jdk1.6.0_20\lib\dt.jar;C:\Program Files\Java\jre6\lib\rt.jar;C:\Sun\db2java.zip;C:\Sun\COM\ibm\db2\jdbc\app\DB2Driver.class;C:\Program Files\IBM\WebSphere\AppServer\derby\lib\deprecated\db2jcc.jar;C:\Program Files\IBM\WebSphere\AppServer\derby\lib\deprecated\db2jcc_license_cu.jar;
path : C:\Program Files\Java\jdk1.6.0_20\bin;C:\Sun\db2java.zip;
I don't know what to do and everytime i try to test my connection i get this error .
Please help.
Thank you

I added Driver Classname =com.ibm.db2.jcc.DB2Driver
and now it no longer gives me cannot load driver COM.ibm.db2.jdbc.app.DB2Driver.
But now i am getting
Execution failed due to a distribution protocol error that caused deallocation of the conversation. A DRDA Data Stream Syntax Error was detected. Reason: 0x1 DB2ConnectionCorrelator: null
com.ibm.db2.jcc.b.cb.l(cb.java:1207)
com.ibm.db2.jcc.b.cb.c(cb.java:357)
com.ibm.db2.jcc.b.cb.v(cb.java:1440)
com.ibm.db2.jcc.b.db.a(db.java:42)
com.ibm.db2.jcc.b.b.e(b.java:1165)
com.ibm.db2.jcc.b.b.b(b.java:1090)
com.ibm.db2.jcc.b.b.q(b.java:925)
com.ibm.db2.jcc.b.b.a(b.java:665)
com.ibm.db2.jcc.b.b.a(b.java:654)
com.ibm.db2.jcc.b.b.<init>(b.java:293)
com.ibm.db2.jcc.DB2Driver.connect(DB2Driver.java:165)
com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:505)
com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
sun.reflect.GeneratedMethodAccessor196.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:597)
org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
Please help.
Thanks

Cannot load script for execution.

hi
iam creating the sisi package with in script task . script task was build successful . but when i was executive the ssis packages vs 2012.
it get error :Cannot load script for execution..
the code is
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
using System.IO;
namespace ST_8cdbf584a74b48abb384d8f03cf42f4d.csproj
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
byte[] dataByte = null; String errInfo = "";
try
String sDirectory = Dts.Variables["User::Directory"].Value.ToString();
String CreatePartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
String ProcessPartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
// Create XMLA Script
Dts.Variables["User::CreatePartitions"].Value = ReadFile(CreatePartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
//Process XMLA Script
Dts.Variables["User::ProcessPartitions"].Value = ReadFile(ProcessPartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
Dts.TaskResult = (int)ScriptResults.Success;
catch (Exception ex)
Dts.Log("Error Message: " + ex.Message, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
public String ReadFile(String FilePath, String ErrInfo)
String strContents;
StreamReader sReader;
try
sReader = File.OpenText(FilePath);
strContents = sReader.ReadToEnd();
sReader.Close();
return strContents;
catch (Exception e)
MessageBox.Show(ErrInfo);
ErrInfo = e.Message;
return "";
how to solve this issue
pleasse help me..

Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot load script for the required change in butt...

I got the email saying Skype will be changed after 15 March. It says we need the new buttons. So I go the site, and then there is a big box which says: "cut and paste this" which is:
<script type="text/javascript" src="http://www.skypeassets.com/i/scom/js/skype-uri.js"></script>
<div id="SkypeButton_Call_[Removed for privacy]_1">
<script type="text/javascript">
Skype.ui({
"name": "call",
"element": "SkypeButton_Call_[Removed for privacy]_1",
"participants": ["[Removed for privacy]"],
"imageSize": 32
</script>
</div>
So where do I paste this script. Plus I get we need to do on our Ipads as well.

Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I cannot load program for neat receipts for mac

I cannot load software for Neat Works for Mac. Can anyone help me?

http://www.macupdate.com/app/mac/33482/neatworks

Cannot load itunes for windows

I cannot load itunes for windows
Can you help me?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Inventory load failed... OPatch cannot load inventory for the given Oracle Home.OPatch failed with error code = 73

Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home       : *****
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.1
OUI version       : 11.2.0.2.0
OUI location      : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?

Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards,

Cannot load classes for custom user store

I implemented a custom user store and deployed as sda library into NetWeaver preview SP16. NetWeaver is not able to load those classes when configuring that user store through Visual Administrator. Below is the error message I got,
Unable to register user store!
java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Can not instantiate UserContext.
     at com.sap.engine.services.security.server.UserStoreImpl.<init>(UserStoreImpl.java:78)
     at com.sap.engine.services.security.server.UserStoreFactoryCache.registerUserStore(UserStoreFactoryCache.java:120)
     at com.sap.engine.services.security.server.UserStoreFactoryImpl.registerUserStore(UserStoreFactoryImpl.java:150)
     at com.sap.engine.services.security.userstore.RemoteUserStoreFactoryImpl.registerUserStore(RemoteUserStoreFactoryImpl.java:64)
     at com.sap.engine.services.security.userstore.RemoteUserStoreFactoryImplp4_Skel.dispatch(RemoteUserStoreFactoryImplp4_Skel.java:99)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.ClassNotFoundException: mypackage.myusercontextimpl
Found in negative cache
Loader Info -
ClassLoader name: [common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]
Parent loader name: [Frame ClassLoader]
References:
   library:com.sap.ip.basecomps
   library:core_lib
   common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
   library:servlet
   library:sapxmltoolkit
   library:com.sap.mw.jco
   library:com.sap.util.monitor.jarm
   library:j2eeca
   library:opensql
   interface:security
   interface:log
   interface:shell
   interface:keystore_api
   library:ejb20
   interface:webservices
   library:com.sap.guid
   interface:appcontext
   interface:endpoint_api
   interface:resourceset_api
   interface:resourcecontext_api
   common:service:iiop;service:naming;service:p4;service:ts
   interface:ejbcomponent
   interface:container
   interface:visual_administration
   interface:transactionext
   interface:dsr_ejbcontext_api
   service:timeout
   library:tc~jmx
   interface:cross
   service:file
   service:locking
   library:tcSLUTIL
   service:memory
   library:antlr
   library:jdbdictionary
   library:opensqlextensions
Resources:
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\dbpool.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\basicadmin.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_compat.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\adminadapter\adminadapter.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\jstartupimpl.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx_notification\jmx_notification.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\security\security.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\com.sap.security.core.ume.service\com.sap.security.core.ume.service.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_toolkit_api.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_userstore_lib.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\webservices_lib.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\jstartupapi.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_jaas_test.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\sqljimpl.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.core.sda\com.sap.security.core.tpd.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.api.sda\com.sap.security.api.perm.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\connector\connectorimpl.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\saaj-api.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\configuration\configuration.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_jaas.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_xmlbind.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_util.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_csi.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_toolkit_core.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_ssf.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\userstore\userstore.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_https.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_service_api.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\jaxrpc-api.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\opensqllib.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\deploy\deploy.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_jaas.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx\jmx_sec.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.api.sda\com.sap.security.api.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.core.sda\com.sap.security.core.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx\jmx.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\jaxm-api.jar
   C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\keystore\keystore.jar
Loading model: {parent,local,references}
     at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:348)
     at com.sap.engine.services.security.server.UserStoreImpl.<init>(UserStoreImpl.java:75)
     ... 13 more
     at com.sap.engine.services.security.exceptions.BaseSecurityException.writeReplace(BaseSecurityException.java:349)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
     at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
     at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
     at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:139)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:306)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

T1000 Boot cannot load driver

Hi,
I have a T1000 that had some patches applied to it using the update manager. Upon rebooting, I get an error saying "pxb_bcm cannot load driver"
and then it says it can't load the root file system.
Any pointers on how to resolve this?
Thanks,
Dave

Boot the machine into single user using a cdrom or jumpstart, mount the root filesystem under /a and then try to remove the patch by using patchrm, aka.
patchrm -R /a 118833-24
.. at least if you have patch 118833-24 installed, if you have a lower version you should try and upgrade it to this version.
.7/M.

Getting 'Cannot load driver: org.postgresql.Driver'' when trying to connect to Postgres DB

Hi All,
I have installed Postgres db in my local system. I have created new datasource in weblogic server and tried testing the connection, but I am getting the errror
Cannot load driver: org.postgresql.Driver
Can some one help me on this, whether i need to add any JDBC jar file to the lib folder in weblogic.
Thanks in advance
Cheers
Venkat

you have to add the driver jar to the WebLogic classpath. See the startWebLogic script to see how the classpath is created.

Cannot load driver for printer

Similar Messages

Maybe you are looking for