Cannot load drivers for C5.00
After instaling PC Suite when first connecting my C5.00 my PC (win 7 64 bit ultimate) consistently fails to load the drivers for:
USB OBEX
MTB USB Device
USB Phonet
USB LCIF
Subsequently I cannot use PC suite or OVi suite. I have tried uninstalling PC suite but each time I start again the same thing happens, even if I change USB ports.
I have successfully loaded same drivers on my Samsung laptop (WIN 7 64 bit home premium) using the same cable and can connect to PC suite OK.
Could you please try this?
I am not sure whether this will solve your problem but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You
Similar Messages
-
This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M. -
All domains booted fine before patching through my local patch proxy on Thursday, June 15th. After running smpatch update, all domains went into the reboot loop with:
Cannot assemble drivers for root /pci@1c,700000/scsi@1/disk@0,0:b
Jun 15 20:42:57 2006 Cannot mount root on /pci@1c,700000/scsi@1/disk@0,0:b fstype ufs
I've reviewed other posts with similar error but there shouldn't be a driver completely missing, as it did boot fine many times before patching. From google search it looked as if /kernel/drv/sd.conf might have been effected by a patch, but that doesn't seem to be the case as a search through all /var/sadm/patch doesn't show any files with that string. Perhaps the scsi drivers were changed somehow?
If this is a patch, I would really like to narrow down which one it might be so I don't need to un-install all of them.
tThanks for the responses, I really do appreciate the help.
My goal was to install Solaris 8 onto 2 systems, a V880 and a V890.
Initially my problem was that I tried to install our existing Solaris 8 07/03 flash archive onto the V880 (and V890). But the V880 and V890 needed newer hardware links, I had to re-create our Solaris 8 flash archive with the 02/04 release of Solaris 8.
Now the V880 and V890 would boot from the network and the OS would install onto the local drives. But when the OS would boot from the local disk, I would received the error "Cannot assemble drivers for root /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w500000e01
1476eb1,0:a". The machine would panic and cycle - booting and panincing over and over again.
Since the net boot image recognized the disks but the flash archive installed image did not, I booted the V880 with "boot net -s" to view the loaded modules. I compared a V240 running Solaris 8 with the net booted V880 as I have no other V880s in the environment. I also compared the directories /kernel/drv/sparcv9/ to see which drivers were missing.
What I discovered is that since I create our flash archive on a scsi based system and I did not use the SUNWCXall package cluster in the profile, the drivers for the FC-AL drives do not get included on the system from which the flash archive is created. The V880 and V890 internal drives are FC-AL based. This was the root cause of my problem.
Thru the comparison described above, I learned that I needed to add the following packages to the install profile of the master system:
socal driver - SUNWluxl and SUNWluxlx
qlc driver - SUNWqlc and SUNWqlcx
usoc driver - SUNWusoc and SUNWusocx
Then I recreated the flash archive and re-jumped the V880 and V890. Both systems booted from their internal drives. And there was much rejoicing... -
I have installed the Windows 8 on my MacBook using BootCamp already, but I cannot install drivers for Windows now: I've got only BootCamp 3 disk and it doesn't goo even if I start it using compatibility options. And my BootCamp on Mac didn't offer me to burn cd with drivers for windows as I saw in many instructions. How can I resolve the problem? Thanks a lot.
Go back to Boot Camp: on the 2nd page you get this:
Download the support software and as Windows is already installed uncheck the 2nd box. -
Can anyone tell why I cannot install drivers for my IPOD Clasic
I have iTunes installed and I cannot install drivers for my IPOD Classic while using windows vista 64 bit?
Download the apps on your syncing computer and then sync to the iPod. Note that you can only sync apps for the one syncing computer you use with the iPod. You can manage music and videos among different computer.
-
Cannot load script for execution.
hi
iam creating the sisi package with in script task . script task was build successful . but when i was executive the ssis packages vs 2012.
it get error :Cannot load script for execution..
the code is
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
using System.IO;
namespace ST_8cdbf584a74b48abb384d8f03cf42f4d.csproj
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
byte[] dataByte = null; String errInfo = "";
try
String sDirectory = Dts.Variables["User::Directory"].Value.ToString();
String CreatePartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
String ProcessPartitionFileXMLA = sDirectory + "\\partitionssales20010701to20010731.XMLA";
// Create XMLA Script
Dts.Variables["User::CreatePartitions"].Value = ReadFile(CreatePartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
//Process XMLA Script
Dts.Variables["User::ProcessPartitions"].Value = ReadFile(ProcessPartitionFileXMLA, errInfo);
if (errInfo.Length > 0)
Dts.Log("Error while reading XMLA file: " + errInfo, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
Dts.TaskResult = (int)ScriptResults.Success;
catch (Exception ex)
Dts.Log("Error Message: " + ex.Message, 0, dataByte);
Dts.TaskResult = (int)ScriptResults.Failure;
public String ReadFile(String FilePath, String ErrInfo)
String strContents;
StreamReader sReader;
try
sReader = File.OpenText(FilePath);
strContents = sReader.ReadToEnd();
sReader.Close();
return strContents;
catch (Exception e)
MessageBox.Show(ErrInfo);
ErrInfo = e.Message;
return "";
how to solve this issue
pleasse help me..Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Cannot load script for the required change in butt...
I got the email saying Skype will be changed after 15 March. It says we need the new buttons. So I go the site, and then there is a big box which says: "cut and paste this" which is:
<script type="text/javascript" src="http://www.skypeassets.com/i/scom/js/skype-uri.js"></script>
<div id="SkypeButton_Call_[Removed for privacy]_1">
<script type="text/javascript">
Skype.ui({
"name": "call",
"element": "SkypeButton_Call_[Removed for privacy]_1",
"participants": ["[Removed for privacy]"],
"imageSize": 32
</script>
</div>
So where do I paste this script. Plus I get we need to do on our Ipads as well.Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I cannot load program for neat receipts for mac
I cannot load software for Neat Works for Mac. Can anyone help me?
http://www.macupdate.com/app/mac/33482/neatworks
-
Cannot load itunes for windows
I cannot load itunes for windows
Can you help me?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .
Try resetting the printing system.
OS X Mavericks: Reset the printing system -
Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home : *****
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 11.2.0.1.1
OUI version : 11.2.0.2.0
OUI location : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards, -
Cannot load classes for custom user store
I implemented a custom user store and deployed as sda library into NetWeaver preview SP16. NetWeaver is not able to load those classes when configuring that user store through Visual Administrator. Below is the error message I got,
Unable to register user store!
java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Can not instantiate UserContext.
at com.sap.engine.services.security.server.UserStoreImpl.<init>(UserStoreImpl.java:78)
at com.sap.engine.services.security.server.UserStoreFactoryCache.registerUserStore(UserStoreFactoryCache.java:120)
at com.sap.engine.services.security.server.UserStoreFactoryImpl.registerUserStore(UserStoreFactoryImpl.java:150)
at com.sap.engine.services.security.userstore.RemoteUserStoreFactoryImpl.registerUserStore(RemoteUserStoreFactoryImpl.java:64)
at com.sap.engine.services.security.userstore.RemoteUserStoreFactoryImplp4_Skel.dispatch(RemoteUserStoreFactoryImplp4_Skel.java:99)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.ClassNotFoundException: mypackage.myusercontextimpl
Found in negative cache
Loader Info -
ClassLoader name: [common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]
Parent loader name: [Frame ClassLoader]
References:
library:com.sap.ip.basecomps
library:core_lib
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:servlet
library:sapxmltoolkit
library:com.sap.mw.jco
library:com.sap.util.monitor.jarm
library:j2eeca
library:opensql
interface:security
interface:log
interface:shell
interface:keystore_api
library:ejb20
interface:webservices
library:com.sap.guid
interface:appcontext
interface:endpoint_api
interface:resourceset_api
interface:resourcecontext_api
common:service:iiop;service:naming;service:p4;service:ts
interface:ejbcomponent
interface:container
interface:visual_administration
interface:transactionext
interface:dsr_ejbcontext_api
service:timeout
library:tc~jmx
interface:cross
service:file
service:locking
library:tcSLUTIL
service:memory
library:antlr
library:jdbdictionary
library:opensqlextensions
Resources:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\dbpool.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\basicadmin.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_compat.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\adminadapter\adminadapter.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\jstartupimpl.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx_notification\jmx_notification.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\security\security.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\com.sap.security.core.ume.service\com.sap.security.core.ume.service.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_toolkit_api.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_userstore_lib.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\webservices_lib.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\basicadmin\jstartupapi.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_jaas_test.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\sqljimpl.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.core.sda\com.sap.security.core.tpd.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.api.sda\com.sap.security.api.perm.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\connector\connectorimpl.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\saaj-api.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\configuration\configuration.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_jaas.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_xmlbind.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_util.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_csi.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_toolkit_core.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_ssf.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\userstore\userstore.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_https.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_saml_service_api.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\jaxrpc-api.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\dbpool\opensqllib.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\deploy\deploy.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\security.class\tc_sec_jaas.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx\jmx_sec.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.api.sda\com.sap.security.api.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\com.sap.security.core.sda\com.sap.security.core.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\jmx\jmx.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\ext\webservices_lib\jaxm-api.jar
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\bin\services\keystore\keystore.jar
Loading model: {parent,local,references}
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:348)
at com.sap.engine.services.security.server.UserStoreImpl.<init>(UserStoreImpl.java:75)
... 13 more
at com.sap.engine.services.security.exceptions.BaseSecurityException.writeReplace(BaseSecurityException.java:349)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at java.io.ObjectStreamClass.invokeWriteReplace(ObjectStreamClass.java:896)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1011)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:278)
at com.sap.engine.services.rmi_p4.DispatchImpl.throwException(DispatchImpl.java:139)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:306)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)Hi sheshu0022,
Based on my research, the issue can be occurred due to something get corrupted in the script task. To fix this issue, please copy the code in the task, then rebuild the script task with the same code to test again.
The following similar thread is for your reference:
http://stackoverflow.com/questions/15165760/ssis-script-task-fails-on-server-with-error-cannot-load-script-for-execution
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Cannot find drivers for HP laserjet 1000
for the love of GOD, can someone tell me why this is so difficult?
I'm on OSX 10.6.8 and the one printer that apple did not install drivers for is the one I am using: HP LASERJET 1000.
I have scoured the forums, and the queries that have been answered date back to four years ago, with the referenced links leading to non-existent sites.
Finally, I found some information.
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
What, pray tell, do I need to do to print something? Why is this so difficult?
Please help save a human life today; give me the answers.
It's good karma
PS: contrary to my product listed, this matter concerns an iMac, not a macbook pro. thanks!Joni Chacho wrote:
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
That page is an old page. It should have redirected you to http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic .
Message was edited by: Matt Broughton -
My pc cannot install drivers for my iphone 5c
okay, so my first iphone was an iphone 4, and when i connected it to the computer, it could sync to itunes and also start autoplay to transfer photos and videos to pc. i gave that phone to my mother and got an iphone 5c, remembering to back it up using itunes so i still had all my stuff there. i also moved all the photos/videos i had on my iphone 4 to the pc so that none of them are on the phone anymore. i didnt put them back on my iphone 5c, i just kept them on the pc.
so now i have a bunch of new photos on my iphone 5c that i would like to transfer to my pc to free up space, but when i plugged it in my pc said: "device driver software was not successfully installed." i opened up task manager and it shows up in "other devices" as "iphone", and when i click properties it says "The drivers for this device are not installed. (Code 28)." clicking "search automatically for updated driver software" just says "windows could not find driver software for your device." clicking "browse my computer for driver software" and browsing in C:\Windows\System32 while having the "include subfolders" button checked just like this article told me to: iOS: Unable to import photos to computer - Apple Support leaves me with "Windows found driver software for your device but encounted an error trying to install it. MTP USB Device The system cannot find the file specifed." ive tried uninstalling the iphone and reinstalling it but it gives me the same error message every time.
my mother's iphone 4 still connects the computer with no problem, and also still connects to itunes. my iphone 5c can connect to itunes. it just wont connect to the computer. my father also has an iphone 5c, and it can also connect to itunes but it gives me the same problem as mine. the computer i have is a Windows 7 Home Premium and it is 64-bit. i havent tried this on a different computer because i cant, i dont have a different one and i dont really have anyone else to help me, so i dont know if this is an issue that is exclusive to my own computer or not. im sorry that this is so long, i just wanted to add as much detail as i can.Uninstall and reinstall iTunes
-
Cannot download drivers for the HP office jet 4635
I cannot find and download drivers for my MAC. On verious support pages for downloading drivers, I enter the procuct name "HP officejet 4635" and enter and only blank pages come up and I cannot continue. It's a new printer and I am about to return it and buy another brand.
I was able to install it for my Windows machine, but most of the use will be on the MAC.Hi,
Download and install the software below:
http://ftp.hp.com/pub/softlib/software12/COL49513/mp-120051-4/HP-Officejet-4630-series_v12.30.0.dmg
Be sure to select HP Scan while installing to get full functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution
Maybe you are looking for
-
Mac mini Late 2014 screen flicking
Just got the Mac mini Late 2014 a week ago. It serves me well except the screen flicks randomly. I have connected Mac mini to two BenQ monitors, one via mini-display port HDMI adaptor (lets said this is port A), another one via mini-display port to
-
I am looking at selling the ADOBE PRO 9 range of software but i am confused as to why one is selling at £20 and another at £200. The packaging is exactly the same and they look the same, so can anyone tell me why this is?? I had a customer asking me
-
IPhone 5 Glitch - Text Messages and E-mails
So basically when I have any application open that uses sound, such as a game for example, if I turn down the volume within the application, when I exit the application the volume of my text messages and e-mails are set to the same level as whatever
-
FM to read multiline WF container from abap webdynpro
Hi Gurus, We are stuck in reading workflow multiline container in our ABAP webdynpro code. Hope some one can assist us. Let me brief you the issue. We need to read the workflow multiline container using our webdynpro program. we are using the FM SAP_
-
Dear All, Please tell me list of reports which are useful for audit purpose. Or Any other way where we find list of reports which are useful only for audit purpose. Regards, Mahesh Wagh