Cannot load EWA report

Dear All,
i have configure for EWA report but the report still not give reported for each satellite system in Solman. one week ago we receive msg from SAP that give us Red Alert for our Production systems, this mean that solution manager for EWA is working. but the problem is the report cannot load the EWA report for every systems in Solman. anyone can help me please...
Thanks

make sure you configured your satellite system properly in SMSY and the RFC are working, also the BACK RFC from satellite system to SolMan.
Goto SDCCN in your satellite system and make sure that a EarlyWatch is scheduled which sends data to your SolMan SID (not OSS!!). This can only be achieved by having a "Request Session Data" Report which has a 10* session and not a Z* session.
If this is not the case :
1) delete your EarlyWatch Schedule in Satellite system via SDCCN
2) unschedule your task processer
3) make sure the installation number in SMSY (SolMan) is correct - same like in satellite system
4) recreate via "Maintain service definitions" your SDCC_OSS connection
5) reschedule the task processer job.
6) recreate a new EarlyWatch Alert for Solution Manager which sends data to your SolMan.
If you have defined your SolMan as the Master for SDCCN (done via SMSY / Menue: Environment / Solution Manager Operation / Administer SDCCN) you just have to schedule "EarlyWatch" instead of 6., this should automatically generate "EarlyWatch Alert for Solution Manager "
HTH
Nesimi

Similar Messages

Cannot load the report on PDF format after running report

Hi,
I try to use Web.show_document to run the report thru form. After that, the PDF file cannot be shown on browser (IE5.0) but the PDF file is generated successful and if use Acrobat to open it, it work.
An error as 'An error occurred trying to load this document'. (The Acrobat reader is loaded)
Thanks for your help in advance.
null

Hello,
I have found a similar problem, I think the problem my be with your acrobat settings.
On Acrobat 5. open an existing pdf file. Then on the menu go to Edit\Preferences\General. => A new screen should pop-up, click on 'Options' on the left hand side, and then check out your WEB OPTIONS. I tend to untick the 'Display PDF in Browser' and leave the others ticked.
I hope this helps.

Cannot showing XL Reporter Window

Dear Reporting Experts,
I face problem when I finished upgrading SBO from 2005A version to 2007A PL46. Most of clients are succeed running XL Reporter, but several clients cannot load XL Reporter window after clicked menu Tools then XL Reporter. I have check SBO system message log, but I found no error XL Reporter message.
Did I miss anything?
Somebody please give me an idea..
BR,
Indra

It's solved.
By copy folder SAP Business One (C:\Program Files\SAP\) and its contents on well running client then paste it to client which the XL Reporter is not running well (to the same path).
Thanks ya,
IR

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

EWA report highlights some Transcations by workload and DB load

Hi All,
I have a SAP system with 5 App servers
I have a EWA report which highlights some Transactions by workload and DB load :
By workload: MMBE, MB51, ME53N, MB11, ME21N
By DB load : MB51, MMBE, ZINF, MB11, RSM13000, Y_STS_71000018
I have analysed the transactions from ST03 . How otherwise also should i be analysing to get to know where the bottlenecks are. As per my analysis i can get hold of some tables which i may do rebuliding of indexes. Also what other approch should i take.
How helpful is ST12 and ST05 and is there any impact to use them for analyis , i mean if i start some traces on will it start filling my os level file systems .
Please let me know if there is some more better approach if i can take.
Thanks & Regards,
Ashish

Hi,
i think the EWA always alerts the 5 Transactions with the highest times.
But this must not mean, that there is an problem.
The difference is, the EWA reads the overall time a transaction used in you system.
If the TA was called 1.000.000 times with an average runtime of 200ms, the Transaction maybe on
first place in your EWA because it used a lot of time, but you do not have an problem.
Look at the responsetimes for dialogtransactions.
Kind regards
Manuel

Report Server cannot load the extension

Hi,
I am developing a custom delivery extension with user interface for SQL Reporting Services. After some other issues that I was able to solve I finally reach this error here: "Report Server (MSSQLSERVER) cannot load the Custom extension."
Where "Custom" is my extension name.
I don't know where the problem is, this is all information I get. I also tried to deploy the PrinterDelivery sample which is part of the official SDK samples for SQL Reporting Services extensions. The weird thing is that this extension does not produce any
event log entries but it is also not displayed in the user interface.
I used this here:
http://msdn.microsoft.com/en-us/library/ms153647%28v=sql.110%29.aspx as deployment guide.
What am I doing wrong?

Hi guw,
By default, we can use the steps below to use a custom assembly in a report:
Build the assembly.
Copy the assembly to the following 3 locations:
    C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies
    C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin
    C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportManager\bin
Edit rsreportserver.config
under <delivery>
<Extension Name="Printer Delivery Sample" Type="Microsoft.Samples.ReportingServices.PrinterDelivery.PrinterDeliveryProvider,Microsoft.Samples.ReportingServices.PrinterDeliverySample">
   <Configuration>
    <Printers>
     <Printer>\\Server\MyNetworkPrinter1</Printer>
     <Printer>\\Server\MyNetworkPrinter2</Printer>
     <Printer>MyPrinter</Printer>
    </Printers>
   </Configuration>
</Extension>
under <deliveryUI>
<Extension Name="Printer Delivery Sample" Type="Microsoft.Samples.ReportingServices.PrinterDelivery.PrinterDeliveryUIProvider,Microsoft.Samples.ReportingServices.PrinterDeliverySample"/>
Open the rssrvpolicy.config(uder C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin) with text editor. Then add the following code group to the file:
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="PrinterDeliveryCodeGroup"
Description="Code group for my delivery extension">
<IMembershipCondition class="UrlMembershipCondition"
version="1"
Url="C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin\yourAssembly.dll"
/>
</CodeGroup>
Open the rsmgrpolicy.config(uder C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportManager\bin) with text editor. Then add the following code group to the file:
<CodeGroup class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Name="PrinterDeliveryCodeGroup"
Description="Code group for my delivery extension">
<IMembershipCondition class="UrlMembershipCondition"
version="1"
Url="C:\Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportManager\bin\yourAssembly.dll"
/>
</CodeGroup>
Add the assembly reference in the report.
The following sample extension is for your reference:
http://msftrsprodsamples.codeplex.com/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

EWA reports in grey colour

Dear friends,
I have a problem with the EWA reports.
It shows me grey colour - Rating not Determined (Gray) - SAP EarlyWatch Alert
The EarlyWatch Alert session is not executed due to critical data quality issues.
Check the data quality in the 'Service Preparation and Service Data Quality' section.
Alert Overview
DB load from expensive SQL statements cannot be measured due to missing SAP Note 1564508.
SAP Note 1564508 is completely implemented.
I tried to create a new report, following the steps:
The session is waiting for data from a managed system. Data transfer can take up to one day.
You can also send the data manually.
In the managed system, start the Service Data Control Center (transaction SDCCN).
Choose Task -> Create. The system displays a task overview.
Double-click Refresh Sessions. A dialog box appears. You can define the attributes of the task.
To start processing the task immediately, select Now in the Scheduling area.
In the Target RFC Destination field, select the RFC connection that points to your SAP Solution Manager system.
Choose Run Task Once.
Confirm your entries. The task appears in the To do view and is marked for processing. When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Task finishes OK, job finishes OK. but when going back to the main page of EWA, I still see the hourglass, with the message : WAIT FOR SESSION DATA; SAP EARLY WATCH ALERT.
Job finished ok in sm37.
Is it normal that if the task is finished in SDCCN to still have the hourglass ?
What do you advice ?

Hello,
Externally the EWA is rated...i.e. in DSWP, correct?
However when you open the report, the Summary Overview has a grey traffic light.
Is this the grey ratting you are talking about? This is a recent problem.
One other thing to check is if the Host names appear in both upper and lower cases as this is also related to the Grey Overview Traffic Light.
The first thing you should check is AGS_UPDATE and ensure all updates are downloaded and activated as there was an SCU ( Service Content Update) that went out recently to address this problem.
If you find your Service Content is rated all green and you are up to date, and an Ad Hoc EWA generates the same way, then you need to check the recommendations in 'Service Preparation and Service Data Quality' section, because there make be issues with the collectors ST06, SAPOSCOL, etc, that need to be resolved.
Oddly many people don't read and act on the recommendations given in the EWA reports when there are alerts, and many times, the solution is being offered right in the recommendation, be it a check to make or a note to reference, so make sure you review any recommendations on the alerts closely.
Regards,
Paul.

Short dump when running EWA report

Dear Expert,
I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_GUI_GP=====================CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Missing RAISING Clause in Interface
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     1
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Trigger Location of Exception
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     19
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Please advise asap since we need the report immediately.
Thank you in advance,
Rudi

Hi,
[This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
feel free to revert back.
--Ragu

Error message: Cannot load the rpt file

Can anyone please help.
I created a Crystal Report which I deployed into Business One. Tested this report on about 13 machines running Business One and all running well except one machine where it comes up with the following error messages:
1: Cannot load the rpt file
2: Object reference not set to an instance of an object
3: Invalid report file path
I have tried logging into Business One on that machine as a different user and encountered the same issue. Then logged onto another machine as the user who uses the machine with the error message and her profile works well on another machine.
This is leaving me with concluding this problem could be down to the machine but cannot figure out how to fix it.
Does anyone have any ideas to solving this?
Thanks
Tony

Hi Tony,
On the troubled computer, check in Control Panel whether Crystal Report Runtime is installed. If not, un-install client app and re-install from B1_Shr client's folder. The first thing that it will do is to instal Crystal Report Runtime.
Source: when I did an upgrade on a client recently this happened. After troubleshooting everything I found that this issue is a hit-and-miss as some PCs had it some don't. I started comparing between working and non-working PC and found this is the only difference I could found.

I need help with imac g4 flat panel download of leopard it tells me it cannot load on the system.

i bought a refurbished imac g4 flat panel. it is supposed to have an os but it only comes up with a question mark. I put leopard in and it tells me it cannot load on this compuert. system is 800mhz and 60g hd and 768ram. i have tried to do a fix through the utility and it says it does not exit and kicks me out. ANY HELP IS A PLUS.

Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime. Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
reset-nvram
set-defaults
reset-all
"The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
http://support.apple.com/kb/TS1812?viewlocale=en_US
You have got get in open firmware to hack the mhz to be higher for the install. That is change what the machine reports as the mhz to be a higher number. Details:
http://lowendmac.com/osx/leopard/openfirmware.html
http://lowendmac.com/osx/leopard/unsupported.html
This works on Tiger but I assume it would work on Leoard.
Macintosh-HD -> Applications -> Utilities -> Terminal
From: san francisco,ca
Registered: Apr 27, 2007
Re: Do the widgets drain system resources and power?
Posted: Apr 28, 2007 2:51 PM
I tend to think dashboard is neat, but not neccesary for my everyday workflow.
it is possible to enable and disable it as needed,
by entering the following commands into the terminal:
-- To turn Dashboard off:
defaults write com.apple.dashboard mcx-disabled -boolean YES
-- To turn Dashboard on:
defaults write com.apple.dashboard mcx-disabled -boolean NO
-- You have to restart the Dock after making either change for it to take effect:
killall Dock
Bye Bye Dashbaord
http://www.kainjow.com/kermitsoft/downloads.html
Disable Spotlight, Bonjour and Dashboard:
http://discussions.apple.com/message.jspa?messageID=8749558#8749558
Robert

BPC 7.0 Server Installation Problem - Cannot connect to reporting services

I am upgrading from 5.1 to 7.0 version for SAP BPC. Everything went smooth on the development server (single instance installation including SQL Server 2005 developers edition 32bit, web, reporting and application services on the same server). I tried to repeat the same process on the test server, and the installation went off the rails. I started with clean installations of SQL Server 2005 on both servers.
When I try to install the BPC server software, I get to the point of access to the report server, and everything stops. I get the following message: Cannot connect to reporting services. I have verified the reporting server name, and I have verified that the server name is correct in the installation panel. I have also verified that the reporting server is configured, started, and that there are no errors.
Any advice?

Hi Sorin,
Thanks for the tip, but this was not the case. The problem was solved by re-loading the OS. Using Windows Server 2003 gave an issue during the re-installation of the SQL Server database. The problem was in the installation itself. After a clean install of both the OS and SQL Server, then SAP BPC 7 worked. The installation does require a number of tweaks, particularly, in my case, the entire Management console must be configured, even if not being used.
This problem is now solved.
J.

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

Cannot load a library unit database_object ( referenced by package name )

Dear Friends,
I am using Plls in Reports 6i. In One of the Pll I am Using
Backend Table in package body. I have two 8i instances. when I
comiple and save and close this plls with one instance( say
instance "A" ), its fine. it is done sucessfully. Now i am
connecting to other instance ( say instance "B" ) and open that
same pll. it is showing compilation error "Cannot load a library
unit <my_table> ( referenced by <package name> )". Now I compile
and save and close with instance "B". it is done sucessfully.
Again I am connecting to Instance "A" and open that same PLL. It
is showing same Error "Cannot load a library unit <my_table> (
referenced by <package name> )"
Anybody can tell me , How to get rid of this Problem. I dont
know its a BUG or somthing else.
I am using Window2000 as OS.
Thanks
Ashish Parikh

If a Schema has some objects in it, then you cannot drop that Schema until you remove all the objects out of it. You can change the schema owner
to another database principal and drop the user like,
Alter Authorization ON Schema::username TO DBO; Drop User username;
other option would be
Transfer the username schema objects to a different schema and drop username schema and user like.
Alter Schema DBO Transfer Username.[OBEJECTNAME] ;
--need to repeat this until you transfer all objects under this schema
Drop Schema username;
Drop User username;
Regards,
Praveen D'sa
MCITP - Database Administrator - 2008
sqlerrors

Cannot download a report

I cannot down load a report. Why?

I have no idea what you are asking about. This forum is for folks using Adobe Acrobat and I see no connection.

Cannot Load Software

I have been trying for days to load even the smallest of software. Then today decided to try reloading my 10.3.9 entirely.
When any software starts installing and it gets to the end of the list I get an error message:
"There were errors installing the software - Please try installing again."
After repeated tries, I still cannot load anything, even printer drivers.
Please help! Never had this issue before.
Thanks in advance for your help.
Diane

This usually arises because of a corrupted hard drive and/or operating system. Although no assurance of success you can try the following:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't succeed, but the hard drive is verified as being OK, then you should do an Archive and Install to place a fresh copy of OS X on the hard drive. This will not delete your files or erase the drive, instead it will place your old system in a Previous System Folder.

Cannot load EWA report

Similar Messages

Maybe you are looking for