Cannot load installer NiD16CI.DLL see hardware vendor

Setup cannot load the installer NiD16CI.DLL for the device GpibHw hardware being installed. contact your hardware vendor.

Hello,
Could you give a more detailed description of what is happening? Do you get this error when installing the driver or when plugging the hardware? What hardware do you have? What OS? What driver version? Is this an upgrade?
If it is an upgrade, please uninstall the previous driver, then reboot, and then install the new driver.
If it is a new install and you are installing from a CD, copy the content of the Disk to your Hard Disk or to a computer on the Network and then install it from there. The reason for this is that sometimes there are some problems when getting the data from the CD unit.
Check that the software or driver is the correct one for the OS and the hardware.
Here is a link to the driver's page
sions.htm> GPIB Drivers
Hope this helps.
Ricardo S.
National Instruments.

Similar Messages

I keep getting an error message when I attempt to print: "Cannot load library LXBCPRP.DLL", but only from within Firefox.

Within Firefox and websites visited within Firefox, whenever I try to print using my Lexmark Z605 printer, the error message "Cannot load library LXBCPRP.DLL, using default '' appears. The printer works fine from other programs and indeed worked fine from within versions of Firefox before 4.0.1, and I have even updated drivers from Lexmark, but the problem persists.

Thanks for your time, but I maintain my position. There has been no problem with my printer from purchase (5+ years ago) until Firefox 4, in particular no problem with Firefox 3.x. I have no problem with ANY other applications I use now and have run through them all to check.
Firefox 4.0.1 remains the prime suspect, but I am willing to try any fix that the wonderful members of Firefox community may care to suggest.

Cannot load gpib-32.dll

"I replaced the GPIB-32.dll file dated 1/26/98 with one dated 7/29/99 in order to fix the "cannot load gpib-32.dll" error. Now I can register it, but I get the error "c:\windows\gpib-32.dll was loaded but the DLLRegisterServer entry point was not found. DLLRegisterServer may not be exported, or a corrupt version of c:\windows\gpib-32.dll may be in memory. Consider using Pview to detect and remove it. When I attempt to run my application windows crashes, but returns after hitting enter."

Chris,
For information concerning language interfaces and GPIB go to the following path:
ni.com>>resource library>>gpib>>programming>>language interfaces
Best Regards,
Chris D

Cannot Connect to Oracle, PHP cannot load oci dlls

Hello,
I have installed wamp on windows server, and oracle 9, When I try to connect to oracle in php I get:
Fatal error: Call to undefined function oci_connect() in C:\wamp\www\project2\index.php on line 3
Also when I start wamp, it cannot load the oci dlls found on:
C:\wamp\bin\php\php5.3.0\ext
I have configured the php.ini file and commented as much options
extension_dir = "C:/wamp/bin/php/php5.3.0/ext/"
extension=php_oci8.dll ; Use with Oracle 10gR2 Instant ...
extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
extension=php_oracle.dll
extension=oci8.so
I am unable to either connect to the database through php, also when I start wamp, i get pop up windows that it cannot load the dynamic procedures related to oracle: php_oce.dll, php_oce8.dll, php_pdo_oci,
I have even eddited the http.conf file
Also have done this:
•Add the following entries to the "C:\Apache\Apache\conf\httpd.conf" file:
LoadModule php4_module c:\php\sapi\php4apache.dll (approx line 193)
AddModule mod_php4.c (approx line 241)
AddType application/x-httpd-php .php (approx line 851)
I have included the phpinfofile attached as well, part of it below is:
System Windows NT SELECAO 5.2 build 3790 (Windows Server 2003 Standard Edition Service Pack 2) i586
Build Date Jun 29 2009 21:23:30
Compiler MSVC6 (Visual C++ 6.0)
Architecture x86
Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--disable-isapi" "--enable-debug-pack" "--with-pdo-oci=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=D:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=D:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared"
Server API Apache 2.0 Handler
Virtual Directory Support enabled
Configuration File (php.ini) Path C:\WINDOWS
Loaded Configuration File C:\wamp\bin\php\php5.3.0\php.ini
Configuration
apache2handler
Apache Version Apache/2.2.11 (Win32) PHP/5.3.0
Apache API Version 20051115
Server Administrator admin@localhost
Hostname:Port localhost:80
Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100
Timeouts Connection: 300 - Keep-Alive: 5
Virtual Server No
Server Root C:/wamp/bin/apache/Apache2.2.11
Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_setenvif mod_php5

I get this error, i decided to change directory for oracle_home
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1/bin");
to
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
it functioned.
my code
<?php
putenv("ORACLE_HOME=C:/oracle/product/10.2.0/db_1");
putenv("ORACLE_SID=PLSExtProc");
$user ="name"; // set user
$senha="password"; // set password
$banco="(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)
(HOST=127.0.0.1)(PORT=1521)
(CONNECT_DATA=(SERVICE_NAME=orcl))
)"; // configuracoes do banco (isso muda um pouco no oracle)
if ($conexao = OCILogon($user,$senha,$banco))
echo "Conexão bem sucedida.";
else
echo "Erro na conexão com o Oracle.";
?>

I also am having problems creating cd cover. When I try to print onlt text comes out picture art is 1 big black square. cannot load library error shows up 126. Do anyone have a solution for this problem?

Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?

One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008

Windows could not load installer for volume. Contact your hardware vendor

If you ever get this message itunes will not update your ipod. I was getting this message on my shuffle but not on any other model. Also got the message it couldn't load installer for my mouse. It took a while to find the answer but this corrected it:
Check your C:\Windows\system32 folder for the file syssetup.dll
If it is missing you'll get the above message for some hardware. Search and you should find it under a service pack or similar folder. Copy the dll into the system32 folder. (you may need to reboot). This finally solved the problem and my shuffle works great.

Deleted Itunes, Quicktime, apple mobile support and updater. Reinstalled and it all worked. Had to do the same thing last time. NOT TOO FUN.

Cannot Load OCI.Dll

Hello:
I just installed the 64-bit version of 11g Release 1 (11.1.0.6) on a server that is running 64-bit Windows 2003 Server.
The installation was successful and I checked using SQL Plus. I am able to log and execute queries. I am also able connect using SQL Developer.
However, when I tried to use SQL Navigator (version 6.1) or Toad 10.0, I get an error message "... Cannot load OCI.DLL".
When I tried to install another COTS product, it complains that it was unable to find Oracle Client and/or Oracle OLE Objects.
I was trying both the tasks on the server itself.
Any ideas on how I can resolve the issues?

I have the same problem: Oracle 11 R2 on Solaris x86-64 and Oracle client (11.1.0.7.0 x64, unfortunately, there's no client higher than that version.). After installing TOAD 10.1 i've checked client connection:
SOFTWARE\WOW6432NODE\ORACLE (Oracle Root)
ORACLE_HOME_NAME:
ORACLE_HOME: C:\app\User\oracle
ORACLE_SID:
NLS_LANG:
SQLPATH:
LOCAL:
C:\app\User\oracle\Bin exists.
C:\app\User\oracle\Bin is in PATH.
Client DLL: C:\app\User\oracle\Bin\oci.dll
Client Version: 11.1.0.7.0
Home is valid.
So, TOAD can see the client, but when i'm trying to connect it i got an error:
Cannot load OCI DLL: oci.dll
Any suggestions?

Error while starting essbase after Installation: Cannot load $DM_APP$

Hi,
I have installed Essbase on solaris. After installation when I start Essbase it started successfully but with an error:
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Error(1052003)
Timed out reading from server
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Error(1054001)
Cannot load application $DM_APP$ with error number [1052003] - see server log file
[Mon Sep 19 09:52:22 2009]Local/ESSBASE0///Warning(1051221)
Creation of Datamining Object Management Application Fails with status [1054001]
I have verified all the evnironment variables they are set correctly same as one of our other environments.
I would really appreciate if some can help me troubleshoot this.
Thanks and Regards,
Vamshi

Finally Found that the JVM path is set inccoretly.This should be the path to be set: $HYPERION_HOME/common/JRE/Sun/1.5.0/lib/sparc/server
Thanks and Regards,
Vamshi

Toad Error - Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll

Hello All,
Help needed to fix this error.
We are getting the below error from Toad after fresh install on Windows 7 64 Bit.
Toad for Oracle Base
Version: 10.6.1.3
Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll
We are using the Oracle Instant Client (instantclient-basic-nt-11.2.0.2.0).
We are able to connect to the database from the command line successfully, but when we tried to launch the Toad and connect it we are getting the above error.
How do we fix this issue?
Thanks in advance.
Sandeep S

mseberg wrote:
So is this a Toad issue or an Oracle client issue?More like a general software or programming "issue". If Toad (or other program) is 32-bit, then loaded libraries (e.g. Oracle Client dll's) needs to be 32-bit.
I'm sure this is documented in requirements for Toad. See e.g. [url http://toadfororacle.com/servlet/KbServlet/download/4264-102-12585/10.6_ReleaseNotes.htm#SystemRequirements]Toad 10.6 Release notes.
Edited by: orafad on Aug 10, 2011 2:35 AM

Cannot load OCI DLL: C:\oracle\product\10.2.0\db_1\bin\oci.dll

Hello,
my environment is:
MS Windows 2003 R2 SP2 Enterprise x64 Edition
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
and I want to use:
TOAD for Oracle Freeware - version 8.5.0.50 g (from Quest Software)
my "path" variable is as below:
C:\Documents and Settings\Administrator.SERVER2003>set path
Path=C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
At location "C:\oracle\product\10.2.0\db_1\bin\" I can see "oci.dll"
BUT... when I try to connect to my database... from TOAD... I get the message below.
Cannot load OCI DLL: C:\oracle\product\10.2.0\db_1\bin\oci.dll
Using "netca" or "sqlplus" I can connect to the database with success.
Help welcome!!!

Hummm....
this should be the cause.
I have Oracle Database 10g Release 10.2.0.1.0 - 64bit Production. Then all the executables including DLLs are 64-bit version compiled.
Now... I guess that the TOAD software is 32-bit application and it can not load 64-bit OCI.DLL.
Thanks to EVERYBODY evolved!!!
By the way:
The TOAD for Oracle Freeware - version 8.5.0.50 g (from Quest Software) is the latest version available from Quest Software.
Regards,

Error while creating database - Cannot load backend library 'oci.dll'

Hi all,
I am newbie to Timesten imdb (in memory database). I do not wish to use oracle rdbms.
I have installed the Timesten IMDB on Win2003.
E:\TimesTen\tt70_32\bin>ttVersion.exe
TimesTen Release 7.0.5.0.0 (32 bit NT) (tt70_32:17000) 2008-04-05T00:54:16Z
Instance admin: m4sadm
Instance home directory: e:\TimesTen\tt70_32
Daemon home directory: e:\TimesTen\tt70_32\srv\info
While installing, I followed the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_install_win_viewlet_swf.html]
Now, I am planning to create a database, and so following the viewlet at: [http://www.oracle.com/technology/products/timesten/viewlets/tt70_create_db_win_cc_viewlet_swf.html]
However, when I give the command (according to the viewlet), I get the following error:
Command> select * from v$version;
5102: Cannot load backend library 'oci.dll' for Cache Connect. OS error message '<empty>'.
The command failed.
Can anyone provide pointers to resolve this?

I'm guessing you chose No to the install question about using Cache Connect to Oracle? This would cause certain libraries not to be installed at install time, specifically libraries that would enable you to use TimesTen Cache Connect to cache data from Oracle tables.
The table "v$version" that you use in your select
select * from v$version
only exists on an Oracle RDBMS. It doesn't exist on TimesTen. Moreover the second viewlet you refer to is about using the TimesTen Cache Connect feature to cache tables from Oracle RDBMS. If you're not interested in using Oracle RDBMS, as you say, it would be my assumption that you're also not interested in using the TimesTen Cache Connect feature? So I'm a little confused here about your intentions. Are you interested in using TimesTen as a standalone datastore, or do you want to use it to cache data from tables located in an Oracle RDBMS?
Thanks.

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

I cannot load the latest version of Itunes on my Toshiba PC with Windows 7 Home Premium. Tried to re-install. Dead in the water. Windows error 126. Cant start becasue MSVCR80.dll is missing from my computer

You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error Opening After Effects CS3 - cannot load AERes1.dll

Hello,
When I try to open After effects I get this Error "cannot load AERes1.DLL"
I tried to reinstall after effects and it didnt dfix the problem.
I uninstalled the entire Master collection CS3 and reinstalled and the problem didnt solve.
I could open After Effects in the past.
Any suggestions?

OK so this is how I solved the problem if anyone encounter it ever again...
Uninstalling and reinstalling the CS3 won't help.
The problem happens probably because of quicktime installed prior to the CS3 updates. I didnt try to remove quicktime. I formatted my PC and luckly I had an image of my c: drive from the time I installed the cs3 and prior to the time I installed Quicktime. So I made all Adobe Cs3 updates first and only than installed Quicktime.
Now After Effects works.
If anyone finds a way to solve this without formatting c: drive, let me know.
Ariel E.

Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into serve

Dear All,
Getting following error while trying to start http server service.
"Syntax error on line 1 of d:\oracle\oracle\apache\apache\conf\mod_ose.conf
Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into server"
Pls tell me the work arounds.
Thanks,
Sathis.

I am getting the same error message on my side.
Were you able to get around the problem? Thank you.

Cannot load installer NiD16CI.DLL see hardware vendor

Similar Messages

Maybe you are looking for