Cannot load movie with subtitles and export in QuickTime 10 / Os X Lion

Since Os X Lion, when trying to load a movie (DivX) in QuickTime 10 at the same time that the related subtitles file (.srt) is in the same folder as the movie, QT 10 suggests to use QT 7. QT 10 cannot load the movie with subtitles (in Snow Leopard everything was OK). Q& 7 is useless too because it cannot export movies to another format.
Anybody has a solution for this? Thanks for your help!

chaquemain wrote:
Since Os X Lion, when trying to load a movie (DivX) in QuickTime 10 at the same time that the related subtitles file (.srt) is in the same folder as the movie, QT 10 suggests to use QT 7. QT 10 cannot load the movie with subtitles (in Snow Leopard everything was OK). Q& 7 is useless too because it cannot export movies to another format.
Anybody has a solution for this? Thanks for your help!
I do this because Perian don't work with QT10 on Mac OS X Lion:
-Try to open .avi movie with QT 10;
-OS X ask you to open on QT 7;
-Donwload QT 7 and install it. It will be installed on "Utilities";
-Download Perian but don't install it;
-Mount Perian, and click "Show Package Contents"
-Go to "Contents"->"Resources"->"Components"->"CoreAudio" and copy to Desktop "A52Codec.zip" and unzip it;
-Go to"Contents"->"Resources"->"Components" and copy to Desktop "Perian.zip" and unzip it;
-Go to "Contents"->"Resources"->"Components"->"CoreAudio"->Quicktime" and copy to Desktop "AC3MovieImport.zip" and unzip it;
-Then copy all packages with ".component" extention to /Library/Quicktime/;
-Then you can run all movies on QT 7.
Or,
-Install MPlayerX;
Or,
-Install VLC;
Or,
Regards

Similar Messages

Playing movie with subtitles and without

Total newbie at making a film with subtitles and at using DVD Studio Pro
The person creating the subtitles did it in FCP and I just opened her project and then laid it on my video. Question is - how can I burn the DVD with the options of English only or with subtitles.
Do I need to have two movies imported into DVD Studio, one with subtitles another not (it's only a 30 minute video, so that's not a problem to fit on a DVD).
Or is there another way to handle it in DVD Studio?
thanks

Typically you would NOT have subs on your footage, but would add them to DVDSP as a separate file. You can create subtitles inside DVDSP but if you do there is no flexibility in manipulating them later.
Workflow is to create the footage in FCP, then to use that in a subtitler app to spot the speech and create the subs, then import the footage and the subs file into DVDSP.
As for setting it up in DVDSP, have a look here:
http://www.kenstone.net/fcphomepage/dvd_sp2subtitles.html
and here for slightly more complexity:
http://www.kenstone.net/fcphomepage/dvd_setup_andresume.html
and finally here for more of the same:
http://digitalproducer.digitalmedianet.com/articles/viewarticle.jsp?id=32345&aft erinter=true

Working with links and exporting to Quicktime

When i create a Quicktime and play it on a Windows PC, it gets confused with internal lnks. I build in some links that refer to another page into the Quicktime file. When i click them on a PC, they start up Explorer instead of going to that page. CAn't seem to figure it out...

Hi John,
the uploading to .mac usually uses a sorenson codec in a .mov container.
That can be watched on PC just when the free Quicktime Player for Windows is installed. does your friends have done that...?
It tells them they're missing some compressor. Downloading the newest version of QT does not help either. newest version for PC or on your Mac's side?
QT7 offers now the brandnew h.264 compression codec... this isn't supported on the Windows side yet (just experimental/beta)... so using the "latest" is maybe the wrong way...
in the iM export dialog you'll find the option ".avi" (PC container + sorenson codec) try that for a mail (big files!) and your friends should see your movie...
and tell them, they shall buy a Mac, hey, c'mon!
you can offer downloads of your project on .mac, but not as convenient as the "upload to" function. ... but that is another cup of tea......

I cannot load facebook with pictures and certain game applications?

for some reason it won't load the facebook website correctly and no pictures show up and i can't get certain game applications to load anymore either.with the update version of mozilla 3.6

It is possible that you clicked "Block Images" in the right-click context menu while saving an image.
See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
You can use these steps to check if images are blocked:
* Open the web page that has the images missing in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the Media tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?

Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD

What happened when a rented movie stops playing and says cannot load movie?

I rented a movie and while I was watching it, it stopped playing and an message popped up that said cannot load movie. Can I fix the problem and finish watching the movie?

Hi Colzona!
You may need to report an issue with this purchase using the information in the following article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

I have downloaded a movie with subtitle to iMovie. When playing the video, the subtitle does not show up through the entire video. It happens to my Mac Air and Mac Pro.

I have downloaded a video with subtitle. When playing the edited video, the subtitle does not show up in the entire video. The subtitle comes and goes in the video.I have tried with my Mac Pro and Mac Air, with the same result. I have downloaded movie with subtitle before and never had this problem. Please advise.

I'm not very knowledgable on this but subtitles are sometimes on a separate track from the main movie. Try opening the downloaded video in Quicktime Player and saving it - you may be asked if you want to "flatten movie". Choose to do this. The resulting movie will probably now work OK. Others may be able to supply more comprehensive instructions.
Geoff.

Watching movies with subtitles Apple TV

I've been searching for a post like this for ages so I decided to make one myself to help other users with the same issue I've had:
Watching movies with subtitles in Apple TV WITHOUT the awfull darkening, shadow or whatever blurry effect showed by itunes player when streaming via airplay.
As many apple fanboys, i just cannot get whyy apple has done such a poor job with apple tv regarding to subtitled videos: the darkening of the lower part of the screen where the subtitles are displayed is simply unbereable and, because of it, I've found myself being forced to hardcode (because muxing is not gonna work, you need to hardcode) subtitles into movies with mp4tools or other similar software, which takes AGES of processing. Bt after buying and ipad i've found a brand new -and incredibily efficient- way to do it: VLC STREAMER
With an Ipad and VCL Streamer, you'll be able to airplay any of your video files of any kind (forget about endless hours converting to mp4) and, what is most important about this thread: TO AIRPLAY MOVIES WITH SUBTITLES not the awfull way apple tv does it, but in a clean, beautiful and regular way.
You need to purchase it cause the free version doesn't support airplay streaming. It is under 2$ or so and it's the best 2$ I've spent in the apple store. Ever.
After having purchased it, you only need to run it in your computer, save any subtitle file (usually .srt) in the same folder with the video file it belongs to and (important) with the same name, just with the extension changed. Then you can either stream it via Wi-Fi or load it and save it in your ipad and, anytime you hit "apple tv airplay", you'll watch it on your tv amazingly as it should be, and not with the ******** darkening of the lower part of the screen that apple tv usually displays.
I know it's not an useful solution for everybody cause it needs an ipad to work but, if you are lucky enough to have one, VLC streamer is an app that will allow you to watch your subtitled movies in your tv easy and clear.
PS: Sorry for bad english!

Not always, but generally this is a network issue.
It also depends if you are playing across the LAN from iTunes (Computers icon using Home Sharing of iTunes) or playing purchases from the cloud under the main Movies/TV Shows/Music (iTunes Match) categories.
Audio will require less speed on either the LAN or internet to work well, whereas video, especially HD is more demanding. If it starts up quickly then stops to rebuffer I would consider interference on the LAN if uisng wifi (eg microwaves, neighbouring networks).
Also, to clarify, you are not talking about Airplay from a device to AppleTV (which will be worse with poor connections).
Test your internet speed at speedtest.net if playing from the internet.
SD needs 2.5 Mbps to play quickly, HD 6-8 Mbps for 720 or 1080p.
If playing across the LAN, if feasible (even for testing) connect as many device to the router by ethernet as possible to see if it's the wifi.
Occasionally when AppleTV behaves oddly it can help to unpower it completely and restart - may or may not help but quick and free. Same goes for restarting the router/Itunes when things go bad.
AC

Why does my downloaded movie say cannot load movie

Why does my downloaded movie stop 30 minutes in and says cannot load movie?

Probably because you don't have enough available storage space. How much do you have? Check at Settings>General>About>Available
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
What is Stored in iCloud and What is Not
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
 Cheers, Tom

Loaded movie with sound problem

I have some movies with attached sound. The movie uses the
sound position property and preset cue times to drive action in the
movie. They play fine on their own but when they are loaded into
another movie using either loadMovie or loadMovieNum, the sound
does not play and the cue driven action don't work. I made sure to
set the _lockroot property to true in the loading clip with
loadMovie and also put it in the original movie and tried using
loadMovieNum.
What happened to the sound?

when instantiating your sound object try:

When i transfer a movie with subtitles on iTunes, i lost them, somebody

when i transfer a movie with subtitles on iTunes, i lost them, somebody know why and how to fix that ?

reza.z wrote:
After downloading movies,
From where? What format are these movies?

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of Internal table with Import and Export parameters and SET/GET parameters, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
Syntax
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

HT3775 I just made a movie in iMovie and exported in MP4 format, now it won't open, error message says quicktime can't open the file ***? Anyone?

i just made a movie in iMovie and exported in MP4 format, now it won't open, error message says quicktime can't open the file ***? Anyone?

I have the same problem. I'm using Mavericks OS and latest iMovie. Both downloaded last week. I save the movie into File (as directed) and QuickTime
will not open. I'm then directed to a page of formats which are supposed to be supported on which is .mp4. Any tips?

When I design with Muse and export as HTML Dreamweaver doesn't attach the style sheets. Any answers?

When I design with Muse and export as HTML Dreamweaver doesn't attach the style sheets when I open the files with Dreamweaver. Essentially when I design with Muse the files don't render the same with Dreamweaver. Is this a bug? Any work arounds?

Then you will have to install a local server and use live view. It's not that DW isn't rendering it or isn't attaching it, it's that Muse decided to use server-side processing to include it which is ok for a CMS practice when you are combining stylesheets for better caching, but it really isn't ideal for a single style sheet. This is a shortcoming of Muse and one of the reasons many professionals don't back the product at the moment. That and you can't actually buy Muse, so unless you are on a subscription you don't have it. It's trying to fill a void for those who don't want to invest in the professional design tools like Fireworks or Photoshop or Dreamweaver, but want a cross between them to make designs. If you have invested in the subscription though and want a better way to make layouts I highly recommend coding it yourself and using Fireworks or Photoshop to do the layout for you. There is an excellent tutorial on the devnet (3 parts) to show you how its done ( http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html ). Once you start using Fireworks or Photoshop you will realize just how limited Muse is in design.

Cannot load movie with subtitles and export in QuickTime 10 / Os X Lion

Similar Messages

Maybe you are looking for