Cannot load or find Driver, Port_#0005.Hub_#0004

Hi all,
I just installed a new sdd and I'm reinstalling all my drivers but I can't seem to find one driver. It says it is in, Port_#0005.Hub_#0004. My computer is a T510 (4313). I've tried windows update and the lenovo drivers update as well and neither one works for me.
Thanks for the help.

Hiyomika wrote:
Hi all,
I just installed a new sdd and I'm reinstalling all my drivers but I can't seem to find one driver. It says it is in, Port_#0005.Hub_#0004. My computer is a T510 (4313). I've tried windows update and the lenovo drivers update as well and neither one works for me.
Thanks for the help.
What I would try (in this order) is a Bios update, Chipset Driver Update and then uninstall all of the USB hubs appearing in Device Manager, reboot. Run the Thinkvantage System Update last to do a cleanup. That SHOULD catch it

Similar Messages

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver I have the message that it is already up to date.
I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

Hi juigarashi,
Microsofts automated troubleshooting service on the link below may help
CD/DVD Repair
Hope it works for you.
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

USB Error Port_#0001.Hub_#0004

I recently began having an issue with my HP Pavilion p7-1270t desktop in which I could no longer print, although I show my printer connected. I found an error on my devices and printers for an unknown device type for my Universal Serial Bus controller at location Port_#0001.Hub_#0004. I follow some advice on another forum to unplug my PC for a few minutes, which temporarily cleared the issue, but it has reared its head again. My OS is Windows 7 Pro 64 bit. Any suggestions?
Thanks

Hi @dug61 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion p7-1270t CTO Desktop and issues with the Printer. I would uninstall the printer software, restart the Desktop. Then reinstall the software. This should give the Desktop a new and fresh look at the printer.
Please note remove any and all USB devices (not the keyboard and mouse). Disconnect all non-essential devices, as these could cause some issues.
You could consult the Printer manufacturer.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Cannot load a FAx driver for a Hp Laserjet 1536dnf MFP on a HP Pavilion Elite e9220y Computer

I cannot find a fax driver for this printer to install on my computer.
I have uninstalled and reinstalled the printer a couple of times It will print and scan but not fax.
I reinstalled fron the orignal disk and off the HP website neither get me fax capablilites.
I have gone to support and cannot find the drive on eith er the printer or computers web page at HP.Com
Please let me know what to do.

Hi @thesaneone4 ,
I see that you are experiencing issues with the fax driver not installing. I would be happy to help you.
Check the connections in the Device Manager for any printer entries, under Universal Serial Bus Controllers look for Fax LEDM or any unknown devices. Right click and try to update the driver. How do I get into Windows Device Manager?
In the Devices and Printers window, what icons do you have for the printer showing?
If you are still having issues, you will need to uninstall the printer software from the CD and unlock the hidden Admin Account when installing the printer software, to make sure there isn't any interference.
Disconnect the USB cable.
Uninstall the software by going to Start, Computer, right click on the CD and open it, then double click on uninstall.
Then download and run the latest software. HP LaserJet Pro M1536dnf Multifunction Printer.
Unlock Hidden Administrator Account and install the printer on this account:
Go to your Start menu and under the 'search programs and files' box type CMD.
CMD will populate as a search option above, just right click on it and 'run as administrator'.
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter.
Next, close CMD and restart your computer.
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.
Under the Administrator account, install the printer software.
Test the printer.
To turn off the Admin account start back at step 1 and type in net user administrator /active:no.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

E70: cannot load IR modem driver

I upgraded the FW to the latest version, I have the latest PC Suite installed and still I cannotuse the E70 with my laptop for dialup GPSR connections. It seems PC suite does not automaticly install the correct drivers for IR modems. I now use the standard one, but I get the message 'cannot connect to the network'. If I go to the option, I only can pick the 'standard modem over IR link'.
On the Nokia site there's a special IR-driver ( an inf.file) for the E70. I downloaded this but it will not install. Even if I try all the basic windows setup install procedures this file is refused. It is seen OK if I go the the option where you select your own drivers, only it will not install. A totally mysterious thing. Is the file corrupt? Is something wrong with my W2K-version.
I remember I had this thing before with other drivers, but one way or the other I always managed to get around this. Now I can't find a solution. Trouble is I cannot use the E70 to connect my PC to the web while I'm traveling.
Anyone with a brilliant solution??
(PS. I don't want to use a cable and I don't want to use bluetooth. I want to get the IR-link working on the E70.)Message Edited by rusco on 25-Oct-2006
05:22 PM
Owner Nokia 520 (experiment: serious problems connecting pop accounts).
History: Siemens S4, Sony Z1, Ericsson SH888, Siemens s40, Nokia 6230, Nokia E70. Nokia E71-1, E72-1, HTC Wildfire (good stuff), HTC One V (also nice).
(And sometimes I still miss my Psion Revo! ;-)

Took a while, but I tried the USB cable and with this connection I have no problem making contact with T-mobile.
So I still don't understand. How can I actually change the standard IR-modem driver thatis included in the Nokia Suite with the special E70 modem driver that I already downloaded? I hope some Nokia E70-W2K specialist has a good tip!Message Edited by rusco on 22-Nov-2006
06:15 PM
Owner Nokia 520 (experiment: serious problems connecting pop accounts).
History: Siemens S4, Sony Z1, Ericsson SH888, Siemens s40, Nokia 6230, Nokia E70. Nokia E71-1, E72-1, HTC Wildfire (good stuff), HTC One V (also nice).
(And sometimes I still miss my Psion Revo! ;-)

Cannot load or find sounds

When I load an EXS instrument a search begins and Logic says it canot find the sound. The sounds are in the Library under App support/Logic. Is there a way to re-link Logic to the library?

Try refreshing the whole menu from the the top of the EXS library window, also make sure in the EXS options/preferences you have *search samples on all volumes* turned on.

Cannot load two cdrom drives, (code 10)

if i try to have two cdrom drives running at the same time, a dvdrom drive and a cdrw drive, the cdrw drive has an error. it says "This device cannot start. (Code 10)" how can i fix this?
If i try to use either individually it will work, i don't understand what Code 10 is though.

I have major probs with ide as well when I have all of the slots filled. I have an 80 gig and a 20 gig as well as a cd reader and writer. When I used the 20 gig attached (a fugitsu) in several differant place once as slave to the 80 and then as master to the writer after a couple of reboots I noticed that when the fugitsu was getting listed by the bios something strange happened it showed up in upper and lower case letters. I never saw that happen before but after I noticed it I could no longer access the drive in windows and the bios detected it as a 14? gig drive using auto and trying it manually. This occurred twice and on differant channels. This did not correct itself by resetting the bios or shutting down the power. I was only able to correct it by physically removing the drive. I put back and it was normal again but it did it again later so I just pulled it. So in my opinion this board has some ide issues in addition to being one of the most picky boards I have seen when it comes to slave and master position on the cables. And theres another joke why in gods name is the master supposed to be attached on the end of the ide 80pin cable when in every computer the hd is below the cdr makes thing a real pain in the ass.
ps the iomagic 24x10x40 drive is a btc remark and I am using it again due to its ability to burn safedisk2 cd's but I liked the 20 gig to boot into linux becuz the 80 gig has probs with grub and lilo and trying to "correct " made XP unbootable and partition magic choked as well

Cannot load device driver for DVD/CDRW - Satellite 1110

I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CDs. It is reported as a MAT****A UJDA730 DVD/CDRW but the device status comes up as:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
I have tried uninstalling and reinstalling the device but the error just returns. I cannot find a driver for it either on the manufacturer's web site or Toshiba's. I don't want to use the Product Recovery CD-ROM as it implies I will lose all software and data on the hard drive.
Can someone advise how to recover from this situation?
Thanks

Hi
Firstly you dont any driver for the CD/DVD drive. The drive uses the standard Windows OS driver and its not necessary to install it additional.
I assume there could be something wrong with the registry entry.
Please check this forum posting:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=13843
The user has used the instruction which was offered on the Microsoft site.
This should help.
Please post again if this method was successful.

Cannot load device driver

Hello, After upgrading to Windows 7 Ultimate, my drive quit working entirely. The description reads: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing". I've downloaded updates and don't know whether I should uninstall or what... please help
This question was solved.
View Solution.

Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Check if the drive is now working.
If the drive is not working, from the Start Menu, open the Control Panel and click on Device Manager. Click to open the IDE ATA/ATAPI Controllers. Right click on the first channel and select uninstall. Do not delete drivers if asked. When uninstalled repeat the process for each channel. Also if an ATA controller is listed, right click and uninstall this, again not deleting drivers if asked. Then open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked.
Reboot the PC and let Windows reinstall the devices. Check the drive again.
If it still isn't working, run the automated fixit from Microsoft on the link below again.
Windows 7
Next, from the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Loading Sharp printer driver on iMac

Hi, I have just come back to Mac after 15 years and in setting up my new computer, I cannot load the Printer Driver for a Sharp ARM205 laser printer. I have downloaded the latest Mac driver from Sharp and I can see the file in the Downloads Folder but cannot work out how to load it. The computer can see the printer but with no driver, no printing after many attempts. Any tips appreciated.

Hello and welcome back to Mac
If you select the driver file in Downloads and perform a Get Info (Command I or File > Get Info), the Get Info will show you under the heading of Name & Extension what format the file is. Note that you may need to click the little triangle next to Name & Extension to expand the view.
With OS X 10.5 and 10.6, there is a built in function to create a compressed zip file. If this is the extension of the driver, simply double click to decompress the download. It will automatically create a folder for the driver in the same Downloads folder. If the file format is something other than zip, you may need Stuffit or something similar to unpack the file. Please reply with the extension name.
Also, under the Name & Extension menu is the Open With section. If you expand this entry, you will see what application on the Mac is set to open these files types. If no application is listed, then as mentioned already you may have to download a utility to unpack the file.
Pahu

Equium - Windows can't load the device driver for USB dongle

I have been using a dongle without problems for about a month, however now it is saying (in device manager ) "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
what does this mean and how can i fix it?

hi it's a vodafone 3gb cheap as chips dongle
it's an equium a200 i think
everything cam as one on the dongle, it uninstalled ok after initial problem, but now won't acknowledge it is in fact a dongle, just a 'usb mass filter' something or other?
i know i sound completely stupid, but when it comes to technology i am!

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

Cannot load JDBC Driver Class in Tomcat5.5 using struts.

Hello to all,
I'm working in the struts environment using Esclipse3.2 IDE.
And I have installed Tomcat5.5 server.I have created the LoginForm
in struts.Now i like to connect my LoginForm with MySql database.I
have also created the database in MySql naming strutsdatabase.
I had also download the mysql-connector-java-3.0.16-ga-bin.jar and
save that in C:/tomcat/commons/lib directory.
While running I have got the below error:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'com.mysql.jdbc.Driver'
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:766)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.setLogWriter(BasicDataSource.java:598)
at org.apache.struts.action.ActionServlet.initModuleDataSources(ActionServlet.java:808)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:335)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
javax.servlet.UnavailableException: Initializing application data source org.apache.struts.action.DATA_SOURCE
at org.apache.struts.action.ActionServlet.initModuleDataSources(ActionServlet.java:812)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:335)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
And I have attached my struts-config.xml:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software
Foundation//DTD Struts Configuration 1.2//EN"
"http://struts.apache.org/dtds/struts-config_1_2.dtd">
<struts-config>
<data-sources>
<data-source
type="org.apache.tomcat.dbcp.dbcp.BasicDataSource">
<set-property property="url"
value="jdbc:mysql://localhost:3306/strutsdatabase?autoReconnect
=true"/>
<set-property property="driverClassName"
value="com.mysql.jdbc.Driver"/>
<set-property property="username" value=""/>
<set-property property="password" value=""/>
<set-property property="maxActive" value="10"/>
<set-property property="validationQuery" value="SELECT
COUNT(*) FROM test"/>
<set-property property="maxWait" value="5000"/>
<set-property property="defaultAutoCommit" value="false"/>
</data-source>
</data-sources>
<form-beans>
<form-bean name="LoginForm"
type="fino.web.struts.action.LoginForm"/>
</form-beans>
<global-exceptions/>
<global-forwards/>
<action-mappings>
<action name="LoginForm" path="/login" scope="request"
type="fino.web.struts.action.LoginAction" validate="true">
<forward name="success" path="/success.jsp"/>
<forward name="failure" path="/failure.jsp"/>
</action>
</action-mappings>
<controller/>
<message-resources null="false"
parameter="org.apache.struts.action.ActionResources"/>
</struts-config>
Friends,please help me to find solution to this problem.

Note: This thread was originally posted in the [Java Compiler|http://forums.sun.com/forum.jspa?forumID=7] forum, but moved to this forum for closer topic alignment.

Cannot load JDBC driver class 'org.gjt.mm.mysql.Driver'

Hi,
I'm trying to run my web app and connect to a MySQL database but keep getting this error:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driver class 'org.gjt.mm.mysql.Driver'
any ideas?
Thanks!

Lookup the stacktrace and find the root cause of the exception.
My cents on a ClassNotFoundException which is rather self-explaining.
By the way, the mentioned driver class name is a very old driver. You shouldn't be using that anymore. Surf to the MySQL homepage and download the most recent Connector/J JDBC driver for your database version. Documentation is also available over there.

Cannot load brother laser printer scan driver

i bought a brother laser printer all in one and cannot get the scan driver to load, i get an error it cannot find the computer, but the print driver loaded and works fine

Try Image Capture, it's already in your Application Folder.
For more, see > Eight amazing Image Capture tricks | Macworld

Cannot load or find Driver, Port_#0005.Hub_#0004

Similar Messages

Maybe you are looking for