Cannot load photos useing lighting connector kit with 64 go memory stickning connection

HI I have a ipad 4 retina have tried to download photos to it useing a lightning connection kit with USB port plusncard readers I plug it in add my memory stick 64gbdoes not download,I'm on iOS 8.02'can any one help me have all my family photos on this stick thank you

An SD card is a Secure Digital type memory card. SD stands for Secure Digital, not Sandisk. A memory stick pro duo 2 gb magic gate
is a Memory Stick Pro duo type of card.
They are different types of cards. the Camera connection kits only works with the Secure Digital type.

Similar Messages

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.

The system on the original install dic is probably looking for the original video card.
It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup.

Using the mac mini with a dial up internet connection

How do I go about using my mac mini with a dial up internet connection? I am soon to be moving to a rural area and dial up will be my only internet option. Please be very specific in your answer as I am not a very tech savvy fellow. Thank you for your help.

The last time I needed to use dial up I used this amazing device from actiontec:
http://shopping.netsuite.com/s.nl/c.ACCT122499/it.A/id.72/.f
Very hard to find one now, but it has the advantage that it connects to the ethernet ports of up to two computers, rather than using a less reliable usb connection.

Installed OS X Mavericks, now cannot load photos page on ITunes during IPhone/Ipad Sync

Hi I downloaded and installed OS X Mavericks last week.
But now realised that I cannot load the photos page during ITunes backup for apple devices!
Have tried reinstalling OS X Mavericks.
Wasn't able to delete itunes, so only could reinstall it.
Couldn't seem to resolve this problem.
Any tips?

Unfortunately without visually inspecting where everything is situated, it is difficult to say without putting you deeper in a hole. It is never a good idea to reinstall an older operating system on top of a new one. Your best bet to rescue your photos is to use an operating system independent file search tool. This tool may help, if you haven't overwritten the original files:
Download FindAnyFile v1.8.6 for older PowerPC Macs)
This program will search for files by their .jpg name and should be able to find old photos, if you know the number of the filename as it was in the Finder.
If you stored the files somewhere outside the main user, you may need help bringing over that user to your shared directory.
If you have overwritten the original files, only a data recovery tool would work. I would bring it in to service, since you attempted something that generally is not recommended unless you know what you are doing. Someone at a Mac usergroup could also attempt to help. http://www.apple.com/usergroups/

I-Pad won't import photos using Camera Connector. Screen goes black. What t

I purchased a 16 gb I-Pad. I bought it on line from the Apple store. I also purchased a Case and a Camera Kit.
I have been unable to use the Camera kit. Every time I try the connection is broken between the I-Pad and the Camera Connector. I thought that maybe I had a bad Camera Connector so I had my friend try it on her I-pad. No problem! Worked great. She was able to select and import all photos and when the import was complete it told her. We used her Camera Connector on my I-pad just to double check but just as before when the import process begins the screen goes black and if I'm lucky maybe 1 pic will import. We used my camera card on both I-pads so I feel confident that it is not the camera card. How can I get this fixed? Is there something I need to do? Has anyone else had this problem?

Thanks for the suggestions. I have removed the I-pad from the case to eliminate the possibility that the Camera Connector wasn't making good contact. Didn't think about the sleep & home button. The connector I use when plugging into my computer works well. No problems, the I-Pad is visible in I-tunes and I can sync and make changes without issue. Just the Camera Connector is unable to import. The connector sees the photos and I can select them but when importing it goes black. Thanks again.

Cannot load photos onto iphoto from kodak easyshare

I previously was able to load my photos onty iphoto (version 2), now that I have connected a new external hard drive, iphoto recognizes the camera and the photos to be imported, but after it starts to import them a message comes up saying "cannot import photo..." and asks me to continue or stop. Help please

An easier way to upload your pics , would be to disable launching iPhoto when you camera is connected. and use a 2 step process to upload pics on an empty folder and then to iPhoto.
- Do you see the camera icon on the desktop?
let me know if you want to know more!
michel

Is it possible to play video directly from my GoPro2 using the connector kit and memorycard?

Hi,
I have the new GoPro2 action cam and a Ipad2. I bought the connector kit for memorycard and USB. I was hoping that I just could take the memorycard and upload the videos to my Ipad2, but I was wrong. I don't work! I have been filming on the highest quality resolution. It is only showing as an grey object.
Can anybody help me with this, is it possible to play the movies?
Regard
Stanly

It may not be compatible with the iPad. See below for reference.
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

My Nokia 701 cannot share photo using NFC to C7

My 701 used to be able to share photo from gallery to my wife's C7 Anna. Strangely, when i tried to send few marked photos, the sending process was taking forever and i had to cancel it. After that, when i tried to share even one photo at a time, the process was still taking forever (sending via NFC unsuccessful). Even after i've done the factory reset, i still cannot send any photo via NFC anymore. Anyway, my 701 is able to receive photos from C7 (updated to Belle). Please help.

I had got problem NFC not sharing photo using NFC , I turned on NFC and Choosed photo to send but it view send messenger, send via mail and send buletooth but not view send NFC I tried many time not working , somebody help me and Fixing issu NFC my mobile Nokia 701 OS Belle Firmware version 111.030.0609 contry code HK product name RM-774
I reinstall System but not working NFC
thanks very much

Cannot load photos onto craigslist but i can email them

Running Windows XP thru Comcast Xfinity & firefox when i am on Craigslist placing an add everything works perfect but when i try to down load photos on the same add it is saying trouble loading page and kicks me off the site it use to work fine i can still E-mail photos just fine. only loading photos on Craigslist it wont load the page

For IPod Touch, using WiFi, the answer is:
BTConnect SMTP server doesn't accept password authentication.
So, outgoing server just needs to be setup as follows:
Host Name: smtp.btconnect.com
User Name:
Password:
Use SSL: Off
Authentication:
Server Port: 25
Leave username, password & authentication blank.

Using TV as display with mini dvi and hdmi connections

Hi
I want to use my flat screen tv as a display for my airbook. I have a mini dvi to hdmi connector (supplied with my mac) and an hdmi cable. When I connect, I can see my wallpaper on the tv and my cursor but nothing else. I can move the cursor on the tv with the trackpad on my mac but there are no icons, toolbars etc. What am I doing wrong and can anyone help?

If you want to see your desktop (icons, menus, etc.) you need to go into Apple Menu: System Preferences -> Displays and select "Mirror Display" under the Arrangement tab. There is also an option that allows you to move the menu bar over to the external display.

I cannot drag photos from iPhoto to desktop with iMac and Mavericks OS

I can no longer drag my a photo from iPhoto to my desktop. I cannot open a folder on my desktop from finder.

It sounds as if you have a permissions issue with your Home folder. Try this method posted by Linc Davis:
Linc Davis
Re: Reset Home Folder Permissions and ACLs not working?
This helped meRe: Reset Home Folder Permissions and ACLs not working?
Apr 30, 2014 10:06 PM (in response to plcmms)
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.

Cannot load recovery disk...even with new HD

Hi,
I have a Toshiba Satelite M55-S135.
I'm currently having this problem:
My hard drive was making very loud clickey noises. Very shortly after this started, my computer flashed the blue screen of death, and then gave me the PXE-E61 error message of "Media Test Failure, Check Cable." My friends said the hard drive (HD) was fried. So i bought a new one. I put it in, made sure it was set to "Master" on the jumpers. Turned it on, got the same error message. I can't get windows to load. So then I thought, oh that's because there's no Windows installed! I went into BIOS and made SURE that it was recognizing the new HD, which it does. I then made it load from CD/DVD, the recovery disk starts up all fine and dandy, then I get the huge "Wrong Machine" error and I feel like I've had this before, and I see a gazillion other people have had. I know for a fact this is the correct disk. I took it out, clean it, inserted it back and tried again. Still didn't work. I saw another person who had this issue, and they suggested trying to prompt it this way instead: Q: > cd\base > os.bat
I tried this, still didn't work, because then it says it cannot find ghost.err. I put the disk into another laptop, and loaded it, and I made sure it detected it and saw all the correct subfolders and everything, etc. so there is nothing wrong with the disk. I'm not really sure where else to go from here. So I would appreciate any assistance. Oh, I've also seen many references to downloading some utility from the downloads section on the toshiba website but how am I even supposed to get to that on my broken laptop if my computer is broke and windows won't load?
Thanks for any future suggestions! I appreciate it

SOLVED !
Probably my old HD was not defective, the problem is with the S-ATA bus interface.
After moving the new internal disk to an external Firewire case, the iMac did boot correctly and no more freezing after OSX updates; before that I also used a new cable (the one connecting the HD to the bus), with no luck.
So, I think the errors of the AHT and Apple Diagnostic are not so helpful, given that it's impossible to know if the broken part is the HD, the cable or the interface on the MB (and all the tests of the motherboard passed ok).
It did cost me a lot anyway: new HD, a good Firewire/USB case, new SuperDrive and a few ours of work of a technician (today I could stay with him to learn how to open the iMac).
Now it is running
Gabriele

Cannot Load Applications Using Desktop Manager

I have a Blackberry Pearl 8130 (through Verizon) and am running Microsoft XP Professional on the PC. Using the About Blackberry Desktop Manger menu item, I find the Desktop Manager version is 4.3.0.15 (Aug 15 2007), the Device Manager version is 4.3.0.7, the Application Loader version is 4.3.0.13, and the RIM program is 1.0.0.35. The Device Software tab has no software listed, although I have several applications installed.
The problem is that when I try to load a new application, the loader program always gives an error message that it cannot find any new applications even though I point it to a directory that contains both the *.alx and *.cod files. Luckily, so far i have been able to find over the air installation options but that isn't always going to work.
I have spent hours on this problem, mostly on the the Blackberry website, but so far have been unable to find anything that worked. I even did a full reinstall of all of the desktop and device software--a full half day job.
Any new ideas would be greatly appreciated.

frfghtr wrote:
Could it be that the desktop manager is generic so as to support all blackberrys but the device software is required for programs that will only work on certain models?
Yep. The Desktop Manager is designed to be universal between BlackBerry Devices, and as handheld code can change for BlackBerry devices often, the configuration files are not included with releases of just the Desktop Manager. You will need to download the relevant handheld code from your carrier to include it.
PITA I know, but its the only way it can be reliably done.
Message Edited by Ben on 04-02-2008 03:26 PM

Safari cannot load web pages, but still communicates with the www

I am using Safari 6.0.5 as my main web browser. Unexpectedly, a week ago it stopped loading web pages, though apparently the program somewhat still communicates with the world outside, since I can enter any text in the address bar and get responses in real time from Google.
Other programs using the internet work regularly. I have already tried the usual set of solutions proposed in the official documents.
Thanks in advance,
Valerio

16/07/13 08:32:44,048 SubmitDiagInfo[305]: Launched to submit Diagnostics and Usage
16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:34:58,455 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:34:58,456 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,212 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,215 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:36:20,216 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,026 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,028 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:37:40,029 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,687 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:39:24,688 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,347 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,348 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:31,349 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,794 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,796 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:40:37,797 apsd[72]: <APSConnectionNotificationQueue: 0x7fcb8484f1f0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
16/07/13 08:45:31,399 WindowServer[85]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
16/07/13 08:45:31,419 loginwindow[57]: CGSGetWindowTags: Invalid window 0xffffffff
16/07/13 08:45:31,419 loginwindow[57]: find_shared_window: WID -1
16/07/13 08:45:31,419 loginwindow[57]: CGSSetWindowTags: Invalid window 0xffffffff
16/07/13 08:45:31,438 loginwindow[57]: ERROR | -[LWBuiltInScreenLockAuthLion preLoad] | guestEnabled is true, but guest mode is not set to a usable value
16/07/13 08:45:31,782 WindowServer[85]: Created shield window 0x5a for display 0x04280380
16/07/13 08:45:31,783 WindowServer[85]: device_generate_desktop_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
16/07/13 08:45:31,873 WindowServer[85]: device_generate_lock_screen_screenshot: authw 0x7feb82c49380(2000), shield 0x7feb82c24510(2001)
16/07/13 08:45:31,929 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
16/07/13 08:45:31,930 loginwindow[57]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
16/07/13 08:46:31,374 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
16/07/13 08:46:31,374 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fd60be04910> Tue Jul 16 09:23:45 2013 CEST (approx)
16/07/13 08:46:31,528 launchctl[319]: launchctl: Couldn't stat("/Library/LaunchAgents/com.oracle.java.Java-Updater.plist"): No such file or directory
16/07/13 08:46:31,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
16/07/13 08:46:34,000 kernel[0]: LE is supported - Disable LE meta event
16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
16/07/13 08:46:34,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
16/07/13 08:46:34,000 kernel[0]: Wake reason: EHC1
16/07/13 08:46:58,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
16/07/13 08:46:58,000 kernel[0]: RTC: PowerByCalendarDate setting ignored
16/07/13 08:46:58,000 kernel[0]: Previous Sleep Cause: 5
16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
16/07/13 08:46:58,000 kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
16/07/13 08:46:58,000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
16/07/13 08:46:58,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
16/07/13 08:46:58,000 kernel[0]: en0: 802.11d country code set to 'X3'.
16/07/13 08:46:58,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
16/07/13 08:46:58,000 kernel[0]: IOThunderboltSwitch(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
16/07/13 08:46:58,000 kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
16/07/13 08:46:58,000 kernel[0]: TBT W (2): 0x0100 [x]
16/07/13 08:46:58,000 kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 2 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
16/07/13 08:46:58,000 kernel[0]: HID tickle 175 ms
16/07/13 08:46:58,297 hidd[61]: MultitouchHID: device bootloaded
16/07/13 08:46:58,000 kernel[0]: NVRM: 0x702a called in D3
16/07/13 08:46:58,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2004), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,878 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5b for display 0x003f003d
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,880 WindowServer[85]: Created shield window 0x5c for display 0x003f003e
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,880 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,881 WindowServer[85]: Created shield window 0x5d for display 0x003f003f
16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7feb82c49380(2002), shield 0x7feb82c24510(2001), lock state 3
16/07/13 08:46:58,881 WindowServer[85]: handle_will_sleep_auth_and_shield_windows: err 0x0
16/07/13 08:46:58,923 loginwindow[57]: resume called when there was already a timer
16/07/13 08:46:59,000 kernel[0]: en0: 802.11d country code set to 'IT'.
16/07/13 08:46:59,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
16/07/13 08:46:59,061 configd[17]: network changed: v4(en0-:10.0.1.2) DNS- Proxy- SMB-
16/07/13 08:46:59,328 hidd[61]: MultitouchHID: device bootloaded
16/07/13 08:47:00,000 kernel[0]: MacAuthEvent en0 Auth result for: b8:c7:5d:05:67:5e MAC AUTH succeeded
16/07/13 08:47:00,000 kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
16/07/13 08:47:00,000 kernel[0]: AirPort: Link Up on en0
16/07/13 08:47:00,000 kernel[0]: en0: BSSID changed to b8:c7:5d:05:67:5e
16/07/13 08:47:00,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
16/07/13 08:47:00,000 kernel[0]: AirPort: RSN handshake complete on en0
16/07/13 08:47:00,651 configd[17]: network changed: v4(en0+:10.0.1.2) DNS+ Proxy+ SMB+
16/07/13 08:47:00,660 UserEventAgent[11]: Captive: en0: Not probing 'Ayn Rand 5 GHz' (protected network)
16/07/13 08:47:00,663 configd[17]: network changed: v4(en0!:10.0.1.2) DNS Proxy SMB
16/07/13 08:47:02,248 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
16/07/13 08:47:02,263 airportd[320]: _doAutoJoin: Already associated to “Ayn Rand 5 GHz”. Bailing on auto-join.
16/07/13 08:47:32,956 com.apple.backupd[330]: Starting automatic backup
16/07/13 08:47:33,107 com.apple.backupd[330]: Backup failed with error: 19
16/07/13 08:47:33,107 com.apple.backupd[330]: Starting automatic backup
16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
16/07/13 08:47:33,000 kernel[0]: nspace-handler-set-snapshot-time: 1373957255
16/07/13 08:47:33,552 com.apple.backupd[330]: Attempting to mount network destination URL: afp://***;[email protected]/Time%20Capsule%20di%20Valerio%20Fi l
16/07/13 08:47:34,000 kernel[0]: AppleSRP started.
16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=339[ksadmin] clearing CS_VALID
16/07/13 08:47:36,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=343[ksadmin] clearing CS_VALID
16/07/13 08:47:42,707 com.apple.backupd[330]: Mounted network destination at mount point: /Volumes/Time Capsule di *** using URL: afp://***;[email protected]/***
16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount: /Volumes/Time Capsule ***, pid 332
16/07/13 08:47:42,000 kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80df13a008 /Volumes/Time Capsule di *** (error = 0, retval = 0)

Cannot email photos using a Panasonic DMC-ZS25 camera on PictBridge

Using a new Panasonic ZS25 camera for the first time , have been unable to successfully email photos. Computer screen shows progress bar filling after pressing "SEND", but immediately followed by message that attempt unsuccessful.
Using the alternative method of dragging photos to Desktop, and then dragging them into body of email message was successful. Why is iPhoto doing this ?

How does PictBridge fit into this ? New camera requires that I access PictBridge as a prelude to downloading and then sending photos by Mail.
Okay so how does iPhoto fit into this?
I'm no familiar with every camera brand, but I believe that Pictbridge is solely for printing, and his no role in simply getting the photos from your camera.
In Mail, note the toolbar at the top right. Click on the second from last button and your entire library is available to be dragged from...

Cannot load photos useing lighting connector kit with 64 go memory stickning connection

Similar Messages

Maybe you are looking for