Cannot load Runtime engine verion 7.0, only 8.0 and later versions are supported

Hi,
I am new to using third party labview drivers. I have a labview driver for Chroma 63600 loads that I want to use in TestStand 2012.
However when I load the vi. I get an error 'cannot load Runtime engine verion 7.0, only 8.0 and later versions are supported'
I have Labview Runtime Engine version 7.0 Installed on my Windows 7 machine.
Could anyone please let me know, How I could resolve this issue?
Please see attached driver for Chroma Loads
Solved!
Go to Solution.
Attachments:
chr63600_LabView_V11.zip ‏866 KB

To avoid more confuison,Here is the scenario,
The version that was on the driver attached is from the driver manufacturer.
I do not have any version of labview INSTALLED on my system. I am using the driver in Test Stand 2012 using a labview adapter.
I make sure I match the VI version and the run time engine version on TestStand 2012 to load the VI.
But for this specific driver, I was not successful in loading the VI at all.
As I understood that only 8.0 OR LATER are supported on TS 2012, I have asked to upconvert the driver to work with 8.2.1 Labview runtime engine.
I have now got a.LLB file of the driver mass compiled in Labview 2012 from discussion boards( and also attached here). I have tried the mass compiled LLB file on TS2012 but still have issues loading the VI as it moans about different version of SUB VIs.
However I am still trying to fix this version incomaptibilies. Any help would be much appreciated

Similar Messages

My Ipodtouch will not load books without "ibooks1.3.1" ,but it seems it cannot load ibooks1.3.1 Is my only solution to buy a new device?

My Itouch will not load ibook 1.3.1 How can I load books on the Itouch?

What model iPod and iOS version do yo have.
If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

So far I've been using Flash Player 11.2 which is the only normal playing sound newer versions are stereo sound streamed normal once the second is the center sp

so far I've been using Flash Player 11.2 which is the only normal playing sound newer versions are stereo sound streamed normal once the second is the center speaker started to play

Flash Player 11.2 is horribly insecure and no longer supported. Please update to Flash 11.6

Loading external swf using Loader.load() method is delayed with flash player 10.1 and next versions.

I am trying to load an external swf file of size 300 kb using Loader.load() method and trying to access some objects in it and i am getting some delay in loading the external file with flash players 10.1 and next versions.
The action script code used to load:
var strUrl:String="toLoad.swf";
var urlReq:URLRequest=new URLRequest(strUrl);
var ldrLoader:Loader = new Loader();
var ldrLoaderContext:LoaderContext = new LoaderContext();
ldrLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, externakSwfLoaded);
ldrLoader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, errorInLoadingSwf);
ldrLoader.contentLoaderInfo.addEventListener(SecurityErrorEvent.SECURITY_ERROR, errorInLoadingSwf);
ldrLoaderContext.applicationDomain = ApplicationDomain.currentDomain;
ldrLoader.load(urlReq, ldrLoaderContext);
addChild(ldrLoader);
System specifications:
O.S. Windows XP sp2 (32 bit)
Browser IE 6.0 (128 bit)
Flash Player version WIN 10,2,152,32

I think you are lost. This forum is for ROME. It sounds like you want one of the Flash or Flex forums...
Good luck!
Harbs

Runtime engine 8.0.1 does not install because higher version is installed

Hello,
I am trying to install Runtime Engine 8.0.1.
This is the message I get when installing Runtime Engine 8.0.1:
"A higher version of this product is already installed."
Yet I do not have another Runtime Engine version installed. According to the NI Add/Remove program, I have the following installed:
NI LabWindows/CVI 8.1 Run-Time Engine
NI Measurement & Automation Explorer 4.2.1
NI-488.2.2.5
NI-485x Software 1.0.1
NI-VISA Runtime 4.0
At some point, I un-installed:
NI LabWindows/CVI 8.1 Run-Time Engine
NI-488.2.2.5
but I ended up with the same results:
"A higher version of this product is already installed."
I checked my folders and deleted any trace of Runtime Engine folders. I therefore deleted:
C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\
but I am still unable to install Runtime Engine 8.0.1.
Any idea?
Thanks,
Francois

Hi Francois,
If you have a newer version of the runtime engine installed, then it should be listed in MAX. However, you've already deleted that directory, so it may not be there anymore. The only way now to uninstall those versions of the runtime engine is to use a utility we have that I cannot post on the forum. If you can create a service request via email or phone then we would be able to help you get the newer versions fully uninstalled. You can create a service request at www.ni.com/ask.
If you do not have a support contract and cannot create a service request, then let me know and I will create one for you so you can call in.
Nick R
NI

Cannot perform a clean install of CF 10 - ODBC Agent and ODBC Server are not in Services - Win2k8 R2

I've tried to perform a clean install on a Win2k8 R2 x64 server several times and I can't seem to get it to install.
I was upgrading from CF 9, which took several attempts. I eventually got CF 10 working and running with the latest updates. But the server would only run for about 15 minutes and everything would come to a screaching hault. ColdFusion pages would fail to load with no error. The pages would hang and wait for the server to respond, which it never did. Restarting IIS would fix the problem.
I have about 20 CF sites on the machine. I came accross an article that talked about pool sizes, etc. I ended up trying a few things with the Web Server Configuration Tool, and as I was adding/deleting servers, I got an error that some application unexpectedly quit, but it wasn't the wsconfig tool. This happened about 3 times as I was deleting servers that I had previously added. Then I tried loading the CF Admin and I got a 500.0 internal server error.
So I bit the bullet and figured I would start all over again. I uninstalled CF 10... now there's nothing on the machine. Re-installed CF 10, and I get the same 500.0 Internal Server Error. I uninstalled, restarted, installed... same thing. Then I found an error in the event viewer that reads:
The description for Event ID 0 from source ColdFusion 10 ODBC Server cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ColdFusion 10 ODBC Server error: 0
StartServiceCtrlDispatcher Error!
Then I found out that neither the ColdFusion 10 ODBC Agent or the ColdFusion 10 ODBC Server have been installed... at least they're not showing up in the list of services. msconfig also shows that they don't exist at all. I tried reinstalling several times and I can't get them to show up.
PS: It's 6:15 AM and I've been working on this since 10 PM last night. I NEED HELP! Thanks!

Hello,
Once you move your application from any prior version of ColdFusion to ColdFusion 10, you will have to tune your application, as the architecture changed from JRun to Tomcat.
You can refer to the article http://blogs.coldfusion.com/post.cfm/tuning-coldfusion-10-iis-connector-configuration for parameters, that needs to be tuned appropriately to make CF connector works flawlessly.
Hope this helps
Regards,
Anit Kumar

Hello. My safari (and i keep it updated) cannot open PDF files. Should i install Adobe Reader and which version????? I have Mac Book Pro running OS 10.9

My safari (and i keep it updated) cannot open PDF files.Should i install Adobe Reader and which version????/ I have Mac Book Pro running OS 10.9
Please help me!!!!

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

HT4796 pc to mac windows xp only (not sp3 and later) - where can I get this file?

My PC is seven years old and is running an old version of Windows XP. I've downloaded the file to put on my pc so that I might transfer the files to my new MacPro, but am getting the following message: Windows XP SP 3 and later.
Where can I get a file that for a PC running Windows XP only?

Hi All,
Adobe Reader Touch app (version 3.0 for Windows 8.1 and above and x86 architecture based devices ) for sideloading deployment is available for download from the below live adobe.com page –
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/windowstouch.html
If there are any queries, please fee free to post on the forums.
Thanks,
Raman

Hyper-v cannot be installed: A hypervisor is already running: VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation

When I try to go to Control Panel\Programs and click on turn windows features on/off and , it shows ticks on hyper-v is removed.
Hyper-v platform Is grayed out and When i move the mouse point to Hyper-v platform it shows a message.
"Hyper-v cannot be installed: A hypervisor is already running"
When I try to install vmware it says..
VMware Workstation and Hyper-v are not compatible. Remove the Hyper-V role from the system before running Vmware Workstation..

I dont feel you can do this. I have also tried what you tried and ended up with a failure.. So had to stick with vmware in one instance and for other instance hyper v...
For further details raise your question here http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
and
https://communities.vmware.com/community/vmtn/developer/forums
Good luck..

Cannot call 2 batch files .. executes only one batch and the program exists

Hello,
I am trying to call 2 batch files from the program . due to some reason only first batch file is called and second one is not called . any idea why it is happening.
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import java.io.*;
import java.io.File;
import java.io.IOException;
import java.io.InputStreamReader;
public class MyBatchFiles {
      public static void main (String args[]) throws Exception {
    StringBuffer output = new StringBuffer();
    StringBuffer error = new StringBuffer();
    try {
               //call batch files
               Process Process=Runtime.getRuntime().exec("cmd /c start F:\\batch1.bat"); // Batch File Path
                   Process.waitFor();
                  BufferedReader inputStreamReader = new BufferedReader(new InputStreamReader(cubeBuildProcess.getInputStream()));
               BufferedReader errStreamReader = new BufferedReader(new InputStreamReader(cubeBuildProcess.getErrorStream()));
               output = new StringBuffer();
               error = new StringBuffer();
               for(String ProcessLine;(ProcessLine=inputStreamReader.readLine())!=null;)
                         output.append(ProcessLine);
               for(String ProcessLine;(ProcessLine=errStreamReader.readLine())!=null;)
                         error.append(ProcessLine);
               System.out.println("transformer output = " + output);
               System.out.println("transformer error = " + error);
               if (error!=null){
                         //calling batch2
                         Process Process2=Runtime.getRuntime().exec("cmd /c start F:\\batch2.bat"); // Batch File Path
                         Process2.waitFor();
                         BufferedReader Process_inputStreamReader = new BufferedReader(new InputStreamReader(Process2.getInputStream()));
                         BufferedReader Process_errStreamReader = new BufferedReader(new InputStreamReader(Process2.getErrorStream()));
                         for(String ProcessLine1;(ProcessLine1=Process_inputStreamReader.readLine())!=null;)
                                   output.append(ProcessLine1);
                         for(String ProcessLine1;(ProcessLine1=Process_errStreamReader.readLine())!=null;)
                                   error.append(cubeCopyProcessLine);
       }catch(Exception e) {
              e.printStackTrace();
}Thanks
Mike

It's your if statement. Why do you think it could be happening?

Page won't load; solution of clearing cookies, cache only works once and needs to be repeated.

For one site only, the message that the page will not load appears. I clear my cookies/cache, as per suggestions, but this allows me to access the site once only, then I need to clear the cookies/cache again.
How can I solve this problem?

Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

Using on a Mac cannot send by default from IPhoto? Only Outlook, IPhoto and Mac Mail shows as options.

We have both Outlook and Thunderbird installed on our IMac. When using IPhoto and we want to send a picture we are given the choices for Outlook, MacMail and IPhoto but not Thunderbird which is our default mail setting and works with everything else. Any clue how to integrate this so it works properly? Thank you!

You could drag the picture out of iPhoto and drop it on the desktop or into the download directory, then attach it from there.

I run Firefox with at least twenty tabs open at the same time. Version 23 (and later versions) load the tabs MUCH more slowly (2 mins rather than 15 secs). HELP

I run Firefox with at least twenty tabs open at the same time. All versions of Firefox newer than version 22 ) load the tabs MUCH more slowly ( approx 2 mins rather than merely 15 secs). HELP!!

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Also check your security software.
You can use the Network tab (the one at the right in the menu) in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K) to check the server response (left-click an entry) see if that is the problem (reload via Ctrl+F5 to bypass the cache).
*https://developer.mozilla.org/en/Tools/Web_Console

Cannot load Runtime engine verion 7.0, only 8.0 and later versions are supported

Similar Messages

Maybe you are looking for