Cannot load USA Today nor another website since upgrading get "time out" message

since upgrading firefox cannot load USA Today or EmergencyMail. ORG get a time out message:
The connection has timed out
The server at service.usatoday.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.

Hi
I am done with this project so I won't get too detailed...
Just a few comments. The solution below works if you have 8.01 or so on the controller to start with.
But when I upgraded the controller to 8.5.1 0r 8.6, or reinstalled from scratch, this file was upgraded by itself
and when I tried to execute the RT application in interactive mode, the same thing happened which was
in the final analysis very annoying.
I simply had to replaced  the new version from 8.5.1 of this file with the old version from 8.01 which is quite small.
So to me, this is a bug !
Perhaps caused by an interdependency play between many libraries in my application; but never the less a bug to be fixed.
Walters

Similar Messages

  • Cannot load my library onto my ipod since getting icloud?  Itunes states that I need to download from icloud?  Can I not use my ipod as I did pre-icloud?

    cannot load my library onto my ipod since getting icloud?  Itunes states that I need to download from icloud?  Can I not use my ipod as I did pre-icloud?

    Chris CA wrote:
    You cannot backup photos to iCloud.
    You can enable Photo Stream (in Settings > iCloud) but only for 30 days and only a max of 1000 photos.
    Then what does this mean? It was copied from the kb article that I posted above.
    Reducing the size of your Camera Roll backup
    If you take lots of photos and videos with your iOS device, you may notice your Camera Roll takes up most of your iCloud Storage backup. To check the size of the Camera Roll backup on your device:
    On your Home Screen, tap Settings.
    Tap iCloud.
    Tap Storage & Backup.
    Tap Manage Storage.
    In the Backups section, tap your device.
    In the Backup Options section, the backup size is displayed under Camera Roll.
    To reduce the size of your Camera Roll backup, save your photos and videos locally to your computer with iTunes, and then manually back up your iOS device. If you want to keep your photos and videos on your iOS device, you can turn off Camera Roll in Backup (see the "Deleting backups and turning off Backup for your Device" section above) orpurchase additional storage.

  • I am unable to access my Bank website since upgrading to Mavericks (Safari 7)

    I am unable to access my Bank website since upgrading to Mavericks (Safari 7)
    I get the following error message in Safari before I even have the opportunity to
    connect to my bank's website.
    It works fine in Firefox and Chrome.
    Access Denied
    You don't have permission to access "http://www.tdbank.com/" on this server.
    Reference #18.a555ee3f.1382720248.13b74953

    I experienced the same problem where by I could not log into my Nationwide Bank account when I had upgraded Safari to the latest Version before Mavericks 6.1.0 on OSX Mountain Lion 10.8.5. I believe.
    I already had Trusteer Rapport installed as recommended by banks.
    Some Banks worked but Nationwide skipped the log in page and kept taking me to a page about Cookies telling me I needed to enable them but they were enabled. I just could not get into the Log In Page. Incidentally the Nationwides Cookies screen shot is of an out of date Cookies setting page - it is now under privacy in Safari preferences.
    I then installed Rapport again when it popped up as an option and bingo I could get to the Log In page.
    Took the plunge and upgraded last evening to Mavericks
    Same probelm occured cannot Log In to Nationwide.
    I have just stopped Trusteer Rapport and thank goodness I can get into Log On again.
    However when I logged out and tried to open another site Safari crashed with the following error message
    "safari quite unexpectedly while using trf.dylib plug-in"
    Chose Reopen and safari opened Ok
    I googled the message and that got me here - seems it is Trusteer Rapport
    So someone needs to sort this out I guess Trusteer I guess?
    Hope this is helpful
    Cheers
    John

  • Trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks

    trying to open youtube, QuickTime cannot open video.3gp, only a problem since upgrading to Mavericks, what do I need to do please ?

    You're right. It wasn't QuickTime itself. I solved all the problems myself.
    The main reason why QuickTime files weren't working was because the newest audio driver from Creative released July 2007 (using their autoupdate) is apparently for Windows Vista (it has the name Vista in the update title). Why that update showed up on my Windows XP Pro system, I have no idea. So, I went to Creative's site and got the driver before the latest release, and all works well.
    The Microsoft update (from June 2007, I noticed today, not July) is another issue. It's based around the file P17RunE.dll, which is something from Microsoft for the SoundBlaster. Not sure what it does, but I don't need it.
    Sorry for wasting all your time on a non QuickTime issue, but thanks for the help.

  • I cannot download updates to Photoshop Elements 9.  I get an error message that my serial number is not recognized or eligible.  Can you help with this?

    I cannot download updates to Photoshop Elements 9.  I get an error message that my serial number is not recognized or eligible.  Can you help with this?

    Hi,
    Which operating system are you running on?
    What updates are you trying to download?
    The last update was 9.0.3 - check by loading the editor and going to Help -> About Photoshop Elements
    The last supported Camera raw is ACR 6.5 - check by loading the editor and going to Help -> About Plug-ins -> Camera Raw
    Do you have a reason to update?
    Brian

  • Trying to load photos off a SD Card and I get an error message "Unreadable files: 185.

    Question-- Trying to load photos off a SD card and I get an error message "Unreadable files: 185"
    Also an error message previously "Your start up disk is almost full . Where do I go to delete some files?

    How big is your HD? How much free space on it?

  • Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

    Since upgrading to ios7 my message screen is blank.I am neither able to seee,send or recieve messages. I upgraded my iPad at the same time but messaging works fine. Anyone else have this problem? Any suggestions?

    I have been researching the exchange message loss  problem on other forums, but not seen a link to browser as yet.  The message loss problem we have here is in a 32bit PB.

  • Cannot load iPhoto Library nor download photos from camera

    Upon reading most of the forums I have come to the conclusion that I have screwed up iPhoto Library by moving and deleting photos. Now Iphoto, verson 2.0 will not load the library nor download photos from an attached camera. It just remains a blank slate. I just did a clean install of OS 10.3 and downloaded all upgrades. Everything works except iPhoto. Reason I did all the didling with the library was that I have 25 Gigs of photos and my hardrive was too full. I still have over 15 Gig of photos on the drive and cannot view them. Prior to the Clean install of OS 10.3 Iphoto worked fine. I have purchased an external hard drive and now think I must do the following:
    1. Format the new hard drive
    2. Move the present iphoto library to the external hard drive. I have to do this as I still have no room on my hard drive. Move the old library out of picture folder.
    3. Open Iphoto. Now it supposedly will ask me where the library is. I will show iPhoto where it is on external drive. Question, iPhoto does not recognize the library now so why should it when I show where it has been moved to?? Do I just move iPhoto library folder or the complete Picture folder?? Also when I hold down the shift and option keys while opening Iphoto to rebuild the library why should it as iphoto stil does not recognize its library??
    4. Somewhere on the discussions I read that I have to hold down option key to get a new iPhoto Library. Can I do this and after creating new library have Iphoto download all albums from old renamed iphoto library??
    Sorry for all the stupid questions. These photos are kids, grandkids and great grandkids, family pictures, etc. It would be devastating to me to loose these. Any help would be appreciated. Than ks
    Powerbook G4   Mac OS X (10.3.9)  
    Powerbook G4   Mac OS X (10.3.9)  

    theolddog:
    Welcome to the Apple Discussions. You will not be able to resurrect your old library due to the renaming and moving of files within the iPhoto Library folder. You'll have to create a new library and import the full sized image files from the old library folder. Here's what you'll need to do:
    1 - open the old iPhoto library folder and type Command-F (find). Then set the following search criteria.
    a. Name contains ".jpg"
    b. Size is greater than 100 KB.
    2 - in the search window will be all of the thumbnail files that do don't want to import into the new library. So select them all and drag to the trash.
    3 - launch iPhoto with the option key depressed and create a new library.
    4 - use the File->Import menu option to select the old library folder and import all of the image files contained therein. You won't get any of the small thumbnail files since you removed them earlier.
    That should do it. You'll probably have more rolls then you had before so you'll have to consolidate photos into fewer rolls. In the future Don't tamper with files in the iPhoto Library folder from the Finder. That's the cardinal sin of iPhoto.
    Do you Twango?

  • Problem loading page for certain websites since upgrading to FF 29

    Since upgrading to Firefox 29, when I click on a link in my e-mail I will get a "problem loading page" tab with a server not found error message. This happens mainly when I get e-mails from BookBub.com and click on the link to go to Amazon to purchase books. I also get e-mails from BookSends that have Amazon links and when I click the links in the BookSends e-mails those work with no problems. However, the issue is not only with the BookBub e-mails. There are random links in other e-mails that will not work (Harbor Freight is another one that I've been trying to click an unsubscribe link in their e-mail and it will not work).
    I have tried clearing my cache, checked the firewall to make sure Firefox is allowed to access the web, checked the computer for malware but nothing has worked. Please help! This is very frustrating. Thanks!

    Please note that you have extensions installed that could be conflicting.
    *Trend Micro extensions and Norton extensions can be problematic.
    Can you disable those? Note that you do NOT need these to keep active virus protection. Norton is installed on your computer and is working system-wide.
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • Cannot access i cloud nor app store since mavericks update

    Since mavericks update I cannot access i cloud nor the app store

    Hi GouldR,
    Thanks for visiting Apple Support Communities.
    If you are having trouble logging into your iCloud account, the steps in this article may help:
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    If the issue persists, feel free to reply with more infomation about any error messages you receive when trying to log in.
    Regards,
    Jeremy

  • Will not load sites linked from another website--have cleared cache, cookies, history, restarted, checked in Safe Mode--still does not work.

    Some sites load fine. But some sites will not load when linked from another web site, or, occasionally, even from my bookmarks. I went through troubleshooting routine--cleared cache and cookies, history, checked in Safe Mode for extensions, etc., but still will not work in Safe Mode. No other problems with computer or browser.

    What happens when you click the link that does not open up the new page? Is it a blank page? Does this also happen if you Shift Click the link?
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • HT201269 i cannot load music onto my iphone 5 since i had a replacement from a faulty one, why?

    I cannot load any music onto my replavcment iphone can anyone help?

    What have you tried so far?
    - JC

  • Cannot open Icloud calendar in outlook 2010 since upgrade to win 8.1

    Since upgrading to Windows 8.1 cannot open iCloud calendars or contacts. I get "This set of folders cannot be opened. Theinformation store could not be opened."

    I uninstalled iCloud control panel, removed any iCloud folders from Outlook, rebooted the computer nad then downloaded and installed the latest iCloud for windows.After going through the reinstall steps and setting up iCloud, Outlook seems to sync with iCloud.

  • No padlock reflects to show secure website since upgrading to firefox 4.

    Since upgrading to Firefox 4 I can't find the padlock anywhere which shows that I am on a secure website.

    A security Padlock Icon should NOT have to be manually set up by the user. It should not be an Add-On, it needs to be a part of the standard build package. It has become a norm and expectation of web usability.
    Not including the icon violates two of Jakob Nielson's Usability Heuristics for HCI (human computer interaction) principles -namely that of 'Visibility' and 'Consistency and Standards'. [http://www.useit.com/papers/heuristic/heuristic_list.html]
    As this is a community driven web platform, the feedback is apparent to reintroduce it ASAP.

  • 10.5.8 & Page loading...now VERY slow since upgrade

    I'm continuing to fight a very slow pageload problem since upgrading to 5.8. It appears to be a DNS like problem. Ping times to both my router and known servers on the Internet are fine, 72ms for pings across a set of routers, that traceroute fine. However, all pages on my browsers, whether Safari or Firefox are now much slower than before the upgrade. I now routinely wait 15 to 20 seconds to load pages that take Vista only a few seconds to load. To be clear, my Vista computers are fine. No load problems at all. Everything else seems to be normal.
    As a test, I ran the Speakeasy Speed test on my connection, download of 1335 kbps, 745 kbps up. So the bandwidth seems to be there, per usual. It's the same on my Vista machines.
    I looked on the board, and couldn't find any similar issues. Anyone seen this? Is a reinstall the only way back? Or is this something that is DNS oriented? I show my router xxx.xxx.xxx.1 as my DNS pointer in Airport.
    Other ideas:
    - Related to IPV6?
    -Related to the AirPort Extreme card or it's 1.4.16.2 firmware?
    - Firewall at this point is allowing all incoming connections.
    Thanks in advance...

    Same type problem. Starting two weeks ago, it is taking between 15 and 20 seconds to load any page, even my google homepage. Same with Safari and Firefox. Reset browser, cleaned out all cookies and cache, dumped and reloaded browser. Speed test shows connection speed to 5.8 mbps on a nominal 6mbps connection, so that's not the problem. Disconnected power and reset modem twice.

Maybe you are looking for

  • Install error on Siebel 8.1.1

    I have seen a couple of posts from people who have had the same error as we are geting when installing Siebel 8.1.1 on Windows 2008 with SQL Server 2008. However, there has never been a post as to how the problem is resolved. We have 4 Siebel Servers

  • How to put music in the app

    Hi, I just installed windows 8.1 on my new PC. The thing is, my OS is installed in an SSD while my other files are on another hard drive. I am having trouble adding music to the music app and picture videos etc.... I tried to put the songs in the mus

  • Download Tree ALV in Excel

    Hi Experts , I want to download ALV tree in excel format and mail excel as attachment. Is this possible? Points Guranteed..... Thanks & Regards , Jigar Thakkar

  • Developer Server 6.0 hanging when launched from Netscape 4.6

    Hi, simple question to ask about OAS and Developer Server. My Developer Server 6.0 hanging when launched from Netscape 4.61, I am currently running... Pentium PII 200Mz running NT sp5 Forms Server version 6.0.5.31.0 (Patch 3 applied) OAS version 4.0.

  • Searching for PowerPC apps

    Before I decide when/whether I will upgrade to Lion, I need to see what apps I'm going to lose access to because of the loss of Rosetta (I know I've got to do something about Quicken 2007). Other than doing a Get Info on every one of my apps, is ther