Cannot load /usr/local/Zend/Core/modules/apache-eapi/libphp5.so into server
Hello All.
I download and install Zend Core for Oracle v.1 Linux x86-64 on
Linux Server (2.6.9-42.0.3.ELsmp #1 SMP x86_64 x86_64 x86_64 GNU/Linux) and on the server I have Oracle Application Server 10g (1.2.0.2). I have the SELINUX=disable in the /etc/selinux/config and LD_LIBRARY_PATH= /usr/local/Zend/Core/lib/
But when I start the midtier HTTPS I get the following error and not loading libphp5.so.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=3203)
failed to start a managed process after the maximum retry limit
Log:
/oracle/ias/mid10g1202/opmn/logs/HTTP_Server~1
the HTTP_Server~1 log file contains this error message.
/oracle/ias/mid10g1202/Apache/Apache/bin/apachectl start: execing httpd
Syntax error on line 1095 of /oracle/ias/mid10g1202/Apache/Apache/conf/httpd.conf:
Cannot load /usr/local/Zend/Core/modules/apache-eapi/libphp5.so into server: /usr/local/Zend/Core/modules/apache-eapi/libphp5.so: cannot open shared object file: No such file or directory
Every thing fine when remove this line from httpd.conf file
LoadModule php5_module /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
help please.
some info about the libphp5.so on the server.
uname -a
Linux web3 2.6.9-42.0.3.ELsmp #1 SMP Mon Sep 25 17:24:31 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
ls -l /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
-rwxr-xr-x 1 root root 5731064 Nov 19 16:25 /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
md5sum /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
e1b7ae62abb0989cc3e8600f0641095b /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
file /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
/usr/local/Zend/Core/modules/apache-eapi/libphp5.so: ELF 64-bit LSB shared object, AMD x86-64, version 1 (SYSV), stripped
ldd /usr/local/Zend/Core/modules/apache-eapi/libphp5.so
libcrypt.so.1 => /lib64/libcrypt.so.1 (0x0000002a95bf4000)
libz.so => /usr/local/Zend/Core/lib/libz.so (0x0000002a95d28000)
libssl.so.0.9.8 => /usr/local/Zend/Core/lib/libssl.so.0.9.8 (0x0000002a95e41000)
libcrypto.so.0.9.8 => /usr/local/Zend/Core/lib/libcrypto.so.0.9.8 (0x0000002a95f9d000)
libresolv.so.2 => /lib64/libresolv.so.2 (0x0000002a9626a000)
libimf.so => /usr/local/Zend/Core/lib/libimf.so (0x0000002a9637f000)
libm.so.6 => /lib64/tls/libm.so.6 (0x0000002a966e8000)
libnsl.so.1 => /lib64/libnsl.so.1 (0x0000002a9686e000)
libxml2.so.2 => /usr/local/Zend/Core/lib/libxml2.so.2 (0x0000002a96985000)
libiconv.so.2 => /usr/local/Zend/Core/lib/libiconv.so.2 (0x0000002a96c82000)
libsvml.so => /usr/local/Zend/Core/lib/libsvml.so (0x0000002a96e66000)
libirc.so => /usr/local/Zend/Core/lib/libirc.so (0x0000002a96fa9000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x0000002a970eb000)
libc.so.6 => /lib64/tls/libc.so.6 (0x0000002a971f6000)
libdl.so.2 => /lib64/libdl.so.2 (0x0000002a9742a000)
/lib64/ld-linux-x86-64.so.2 (0x000000552aaaa000)
Similar Messages
-
Httpd fail to start after Zend Core installation
Hi!
I need Zend, so I installed it using this instruction.
The problem is that httpd daemon faild to start after that.
Here is my /etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#FastCGI module
LoadModule fcgid_module lib/apache/mod_fcgid.so
AddHandler fcgid-script .php
FCGIWrapper /usr/local/bin/php-cgi .php
SocketPath /tmp/fcgidsock
SharememPath /tmp/fcgidshm
#php module
#LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
ErrorDocument 400 /error.php?400
ErrorDocument 401 /error.php?401
ErrorDocument 403 /error.php?403
ErrorDocument 404 /error.php?404
ErrorDocument 500 /error.php?500
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#php include
Include conf/extra/php5_module.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#<VirtualHost *:80>
#ServerName oldforum
#DocumentRoot /srv/oldforum
#</VirtualHost>
### Start of Zend Core
### PHP Apache Module
# LoadModule php5_module /usr/local/Zend/Core/modules/apache22/libphp5.so
### PHP FastCGI
LoadModule zend_enabler_module /usr/local/Zend/Core/modules/apache22/zend_enabler.so
FastCgiConfig /usr/local/Zend/Core/etc/zend_enabler.conf
AddHandler zend-enabler-script .php
### PHP CGI
# Action application/x-httpd-php /zend-cgi/php
# ScriptAlias /zend-cgi/ /usr/local/Zend/Core/cgi-bin/
AddType application/x-httpd-php .php
DirectoryIndex index.php
ExtendedStatus on
Alias /ZendCore /usr/local/Zend/Core/GUI
<Location /ZendCore>
Options FollowSymLinks
Order deny,allow
Allow from all
</Location>
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
<Location /server-info>
SetHandler server-info
Order deny,allow
Deny from all
Allow from localhost
Allow from 127.0.0.1
</Location>
### End of Zend Core
Here is my /etc/php.ini:
[PHP]
; About php.ini ;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; This is the recommended, PHP 5-style version of the php.ini-dist file. It
; sets some non standard settings, that make PHP more efficient, more secure,
; and encourage cleaner coding.
; The price is that with these settings, PHP may be incompatible with some
; applications, and sometimes, more difficult to develop with. Using this
; file is warmly recommended for production sites. As all of the changes from
; the standard settings are thoroughly documented, you can go over each one,
; and decide whether you want to use it or not.
; For general information about the php.ini file, please consult the php.ini-dist
; file, included in your PHP distribution.
; This file is different from the php.ini-dist file in the fact that it features
; different values for several directives, in order to improve performance, while
; possibly breaking compatibility with the standard out-of-the-box behavior of
; PHP. Please make sure you read what's different, and modify your scripts
; accordingly, if you decide to use this file instead.
; - register_globals = Off [Security, Performance]
; Global variables are no longer registered for input data (POST, GET, cookies,
; environment and other server variables). Instead of using $foo, you must use
; you can use $_REQUEST["foo"] (includes any variable that arrives through the
; request, namely, POST, GET and cookie variables), or use one of the specific
; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
; on where the input originates. Also, you can look at the
; import_request_variables() function.
; Note that register_globals is going to be depracated (i.e., turned off by
; default) in the next version of PHP, because it often leads to security bugs.
; Read http://php.net/manual/en/security.registerglobals.php for further
; information.
; - register_long_arrays = Off [Performance]
; Disables registration of the older (and deprecated) long predefined array
; variables ($HTTP_*_VARS). Instead, use the superglobals that were
; introduced in PHP 4.1.0
; - display_errors = Off [Security]
; With this directive set to off, errors that occur during the execution of
; scripts will no longer be displayed as a part of the script output, and thus,
; will no longer be exposed to remote users. With some errors, the error message
; content may expose information about your script, web server, or database
; server that may be exploitable for hacking. Production sites should have this
; directive set to off.
; - log_errors = On [Security]
; This directive complements the above one. Any errors that occur during the
; execution of your script will be logged (typically, to your server's error log,
; but can be configured in several ways). Along with setting display_errors to off,
; this setup gives you the ability to fully understand what may have gone wrong,
; without exposing any sensitive information to remote users.
; - output_buffering = 4096 [Performance]
; Set a 4KB output buffer. Enabling output buffering typically results in less
; writes, and sometimes less packets sent on the wire, which can often lead to
; better performance. The gain this directive actually yields greatly depends
; on which Web server you're working with, and what kind of scripts you're using.
; - register_argc_argv = Off [Performance]
; Disables registration of the somewhat redundant $argv and $argc global
; variables.
; - magic_quotes_gpc = Off [Performance]
; Input data is no longer escaped with slashes so that it can be sent into
; SQL databases without further manipulation. Instead, you should use the
; function addslashes() on each input element you wish to send to a database.
; - variables_order = "GPCS" [Performance]
; The environment variables are not hashed into the $_ENV. To access
; environment variables, you can use getenv() instead.
; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
; By default, PHP surpresses errors of type E_NOTICE. These error messages
; are emitted for non-critical errors, but that could be a symptom of a bigger
; problem. Most notably, this will cause error messages about the use
; of uninitialized variables to be displayed.
; - allow_call_time_pass_reference = Off [Code cleanliness]
; It's not possible to decide to force a variable to be passed by reference
; when calling a function. The PHP 4 style to do this is by making the
; function require the relevant argument by reference.
; Language Options ;
; Enable the PHP scripting language engine under Apache.
engine = On
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
zend.ze1_compatibility_mode = Off
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
; NOTE: Using short tags should be avoided when developing applications or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag = On
; Allow ASP-style <% %> tags.
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
precision = 14
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = On
; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
zlib.output_compression = Off
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off
; The unserialize callback function will called (with the undefind class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100
; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = Off
; Safe Mode
safe_mode = Off
; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off
; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =
; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =
; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_
; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000
; Misc
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On
; Resource Limits ;
max_execution_time = 30 ; Maximum execution time of each script, in seconds
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
; Error handling and logging ;
; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatability of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; - Show all errors, except for notices and coding standards warnings
;error_reporting = E_ALL & ~E_NOTICE & ~E_STRICT
; - Show all errors, except for notices
;error_reporting = E_ALL & ~E_NOTICE
; - Show only errors
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
; - Show all errors
error_reporting = E_ALL
; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = Off
; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off
; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; sourcelines.
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
report_memleaks = On
; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off
; Disable the inclusion of HTML tags in error messages.
; Note: Never use this feature for production boxes.
;html_errors = Off
; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://www.php.net/docs.php
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot.
; Note: Never use this feature for production boxes.
;docref_root = "/phpmanual/"
;docref_ext = .html
; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"
; String to output after an error message.
;error_append_string = "</font>"
; Log errors to specified file.
;error_log = filename
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
; Data Handling ;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"
; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "GPCS"
; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
; and friends. If you're not using them, it's recommended to turn them off,
; for performance reasons.
register_long_arrays = Off
; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On
; Maximum size of POST data that PHP will accept.
post_max_size = 8M
; Magic quotes
; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = Off
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off
; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off
; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
;extension_dir = "./"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
upload_max_filesize = 2M
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On
; Define the anonymous ftp password (your email address)
;from="[email protected]"
; Define the User-Agent string
; user_agent="PHP"
; Default timeout for socket based streams (seconds)
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings = Off
; Module Settings ;
[Date]
; Defines the default timezone used by the date functions
[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off
[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25
; For Win32 only.
;sendmail_from = [email protected]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
; Allow or prevent persistent links.
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1
[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =
; Maximum time (in secondes) for connect timeout. -1 means no limimt
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
mysql.trace_mode = Off
[MySQLI]
; Maximum number of links. -1 means no limit.
mysqli.max_links = -1
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1
[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
pgsql.ignore_notice = 0
; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
pgsql.log_notice = 0
[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1
;sybase.interface_file = "/usr/sybase/interfaces"
; Minimum error severity to display.
sybase.min_error_severity = 10
; Minimum message severity to display.
sybase.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off
[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1
; Minimum server message severity to display.
sybct.min_server_severity = 10
; Minimum client message severity to display.
sybct.min_client_severity = 10
[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case = "lowercase"
[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0
[browscap]
;browscap = extra/browscap.ini
[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =
; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =
; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =
; Allow or prevent persistent links.
ifx.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1
; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0
; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0
; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0
; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0
; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0
[Session]
; Handler used to store/retrieve data.
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
;session.save_path = "/tmp"
; Whether to use cookies.
session.use_cookies = 1
; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies = 1
; Name of the session (used as cookie name).
session.name = PHPSESSID
; Initialize session on request startup.
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0
; The path for which the cookie is valid.
session.cookie_path = /
; The domain for which the cookie is valid.
session.cookie_domain =
; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php
; Define the probability that the 'garbage collection' process is started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_divisor,
; e.g. 1/100 means there is a 1% chance that the GC process starts
; on each request.
session.gc_probability = 1
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning seperately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.
session.bug_compat_42 = 0
session.bug_compat_warn = 1
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =
; How many bytes to read from the file.
session.entropy_length = 0
; Specified here to create the session id.
session.entropy_file =
;session.entropy_length = 16
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter = nocache
; Document expires after n minutes.
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publically accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
session.use_trans_sid = 0
; Select a hash function
; 0: MD5 (128 bits)
; 1: SHA-1 (160 bits)
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; 4 bits: 0-9, a-f
; 5 bits: 0-9, a-v
; 6 bits: 0-9, a-z, A-Z, "-", ","
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. Default = 25
;mssql.max_procs = 25
[Assertion]
; Assert(expr); active by default.
;assert.active = On
; Issue a PHP warning for each failed assertion.
;assert.warning = On
; Don't bail out by default.
;assert.bail = Off
; User-function to be called if an assertion fails.
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0
[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1
; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1
; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =
; Default user.
ingres.default_user =
; Default password.
ingres.default_password =
[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"
; Default port to connect to.
pfpro.defaultport = 443
; Default timeout in seconds.
pfpro.defaulttimeout = 30
; Default proxy IP address (if required).
;pfpro.proxyaddress =
; Default proxy port.
;pfpro.proxyport =
; Default proxy logon.
;pfpro.proxylogon =
; Default proxy password.
;pfpro.proxypassword =
[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On
[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true
[mbstring]
; language for internal character representation.
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding = EUC-JP
; http input encoding.
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output = SJIS
; enable automatic encoding translation accoding to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload = 0
[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settings you can distinguish between motorola and
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode = ISO-8859-15
;exif.decode_unicode_motorola = UCS-2BE
;exif.decode_unicode_intel = UCS-2LE
;exif.encode_jis =
;exif.decode_jis_motorola = JIS
;exif.decode_jis_intel = JIS
[Tidy]
; The path to a default tidy configuration file to use when using tidy
;tidy.default_config = /usr/local/lib/php/default.tcfg
; Should tidy clean and repair output automatically?
; WARNING: Do not use this option if you are generating non-html content
; such as dynamic images
tidy.clean_output = Off
[soap]
; Enables or disables WSDL caching feature.
soap.wsdl_cache_enabled=1
; Sets the directory name where SOAP extension will put cache files.
soap.wsdl_cache_dir="/tmp"
; (time to live) Sets the number of second while cached file will be used
; instead of original one.
soap.wsdl_cache_ttl=86400
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example:
; extension=msql.so
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.
zend_core_dir="/usr/local/Zend/Core"
zend_gui_password=63a9f0ea7bb98050796b649e85481845
zend_core.default_gui_language=en
zend_gui.ini_modifier_path="/usr/local/Zend/Core"
extension_dir="/usr/local/Zend/Core/lib/php/20060613"
include_path=".:/usr/local/Zend/ZendFramework/library:/usr/local/Zend/Core/share/pear"
zend_extension="/usr/local/Zend/Core/lib/zend/ZendExtensionManager.so"
zend_extension_manager.optimizer="/usr/local/Zend/Core/lib/zend/optimizer"
zend_extension_manager.debug_server="/usr/local/Zend/Core/lib/zend/debugger"
zend_ini_file=/usr/local/Zend/Core/etc/zend.ini
[zend]
extension=apc.so
extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
extension=curl.so
;extension=db2.so
;extension=exif.so
;extension=ftp.so
extension=gd.so
;extension=gettext.so
;extension=gmp.so
;extension=ibm_db2.so
extension=iconv.so
extension=imap.so
;extension=ldap.so
extension=mbstring.so
;extension=mcrypt.so
;extension=memcache.so
;extension=mhash.so
;extension=ming.so
extension=mysql.so
extension=mysqli.so
;extension=oci8.so
;extension=pcntl.so
extension=pdo.so
;extension=pdo_ibm.so
extension=pdo_mysql.so
;extension=pdo_oci.so
extension=pdo_pgsql.so
;extension=pdo_sqlite.so
extension=pgsql.so
;extension=posix.so
;extension=shmop.so
extension=soap.so
;extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=tokenizer.so
;extension=xmlreader.so
;extension=xmlrpc.so
extension=xmlwriter.so
;extension=xsl.so
;extension=zip.so
;extension=bz2.so
;extension=calendar.so
;extension=db2.so
;extension=exif.so
;extension=ftp.so
;extension=gettext.so
;extension=gmp.so
;extension=ibm_db2.so
;extension=ldap.so
;extension=mcrypt.so
;extension=memcache.so
;extension=mhash.so
;extension=ming.so
;extension=oci8.so
;extension=pcntl.so
;extension=pdo_ibm.so
;extension=pdo_oci.so
;extension=pdo_sqlite.so
;extension=posix.so
;extension=shmop.so
;extension=sockets.so
;extension=sqlite.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=tokenizer.so
;extension=xmlreader.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
Please, tell me what's the reason and what I should do.
Thanks in advance.Hi Garyalbert,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with No POST on ThinkPad X240.
To resolve the issue I suggest you to perform power drain, to go with power drain option please removing power adapter and battery. Hold the power button for 30 second and then connect only power adapter and try to switch on the system. If the system is switching ON then connect battery and check it once.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Cannot load nvidia driver module [SOLVED]
OK so for some reason I can no longer load the nvidia (proprietary) driver.
I have a laptop with optimus, on board intel and discrete nvidia GTX680M. I use this laptop for cuda development so I don't care about games etc, I just need the driver loaded to debug and run my cuda apps. bbswitch still works fine as does bumblebee which I don't use normally but I do have it setup and running in case. Also I didn't really work much on coding last week so not sure exactly when this started.
So here is what happens when I try to insert the nvidia module or use optirun:
$ sudo modprobe nvidia
modprobe: ERROR: could not insert 'nvidia': No such device
$ sudo insmod nvidia
insmod: ERROR: could not load module nvidia: No such file or directory
$ optirun -vv glxspheres
[ 27.485342] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 27.485506] [INFO]Configured driver: nvidia
[ 27.485635] [DEBUG]optirun version 3.2.1 starting...
[ 27.485642] [DEBUG]Active configuration:
[ 27.485645] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 27.485662] [DEBUG] X display: :8
[ 27.485674] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 27.485676] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 27.485679] [DEBUG] Accel/display bridge: primus
[ 27.485681] [DEBUG] VGL Compression: xv
[ 27.485684] [DEBUG] VGLrun extra options:
[ 27.485686] [DEBUG] Primus LD Path: /usr/lib:/usr/lib32
[ 27.560627] [INFO]Response: No - error: Could not load GPU driver
[ 27.560647] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 27.560651] [DEBUG]Socket closed.
[ 27.560666] [ERROR]Aborting because fallback start is disabled.
[ 27.560671] [DEBUG]Killing all remaining processes.
I don't have an xorg file for the intel gpu.
device nodes are created:
$ ls /dev/ | grep nv
crw-rw-rw- 1 root root 195, 0 Sep 24 14:58 nvidia0
crw-rw-rw- 1 root root 195, 255 Sep 24 14:58 nvidiactl
log info:
$cat /var/log/Xorg.0.log | grep EE
[ 3.385] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.299] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.308] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.308] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
$ cat /var/log/Xorg.8.log
[ 11367.762]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 11367.762] X Protocol Version 11, Revision 0
[ 11367.762] Build Operating System: Linux 3.11.0-1-ARCH x86_64
[ 11367.762] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
[ 11367.762] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1c3a736e-6aab-45e1-a9ad-5d2f6195cd7d ro quiet
[ 11367.762] Build Date: 13 September 2013 01:28:59PM
[ 11367.762]
[ 11367.762] Current version of pixman: 0.30.2
[ 11367.762] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 11367.762] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11367.762] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Sep 19 23:04:24 2013
[ 11367.762] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 11367.762] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 11367.762] (==) ServerLayout "Layout0"
[ 11367.762] (==) No screen section available. Using defaults.
[ 11367.762] (**) |-->Screen "Default Screen Section" (0)
[ 11367.762] (**) | |-->Monitor "<default monitor>"
[ 11367.762] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 11367.762] (**) | |-->Device "DiscreteNvidia"
[ 11367.762] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11367.762] (**) Option "AutoAddDevices" "false"
[ 11367.762] (**) Option "AutoAddGPU" "false"
[ 11367.762] (**) Not automatically adding devices
[ 11367.762] (==) Automatically enabling devices
[ 11367.762] (**) Not automatically adding GPU devices
[ 11367.762] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11367.762] Entry deleted from font path.
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11367.762] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11367.762] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 11367.762] (==) |-->Input Device "<default pointer>"
[ 11367.763] (==) |-->Input Device "<default keyboard>"
[ 11367.763] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 11367.763] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 11367.763] (II) Loader magic: 0x7fdc20
[ 11367.763] (II) Module ABI versions:
[ 11367.763] X.Org ANSI C Emulation: 0.4
[ 11367.763] X.Org Video Driver: 14.1
[ 11367.763] X.Org XInput driver : 19.1
[ 11367.763] X.Org Server Extension : 7.0
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11367.763] setversion 1.4 failed
[ 11367.764] (--) PCI:*(0:1:0:0) 10de:11a0:1558:5105 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 11367.764] Initializing built-in extension Generic Event Extension
[ 11367.764] Initializing built-in extension SHAPE
[ 11367.764] Initializing built-in extension MIT-SHM
[ 11367.764] Initializing built-in extension XInputExtension
[ 11367.764] Initializing built-in extension XTEST
[ 11367.764] Initializing built-in extension BIG-REQUESTS
[ 11367.764] Initializing built-in extension SYNC
[ 11367.764] Initializing built-in extension XKEYBOARD
[ 11367.764] Initializing built-in extension XC-MISC
[ 11367.764] Initializing built-in extension SECURITY
[ 11367.764] Initializing built-in extension XINERAMA
[ 11367.764] Initializing built-in extension XFIXES
[ 11367.764] Initializing built-in extension RENDER
[ 11367.764] Initializing built-in extension RANDR
[ 11367.764] Initializing built-in extension COMPOSITE
[ 11367.764] Initializing built-in extension DAMAGE
[ 11367.764] Initializing built-in extension MIT-SCREEN-SAVER
[ 11367.764] Initializing built-in extension DOUBLE-BUFFER
[ 11367.764] Initializing built-in extension RECORD
[ 11367.764] Initializing built-in extension DPMS
[ 11367.764] Initializing built-in extension X-Resource
[ 11367.764] Initializing built-in extension XVideo
[ 11367.764] Initializing built-in extension XVideo-MotionCompensation
[ 11367.764] Initializing built-in extension XFree86-VidModeExtension
[ 11367.764] Initializing built-in extension XFree86-DGA
[ 11367.764] Initializing built-in extension XFree86-DRI
[ 11367.764] Initializing built-in extension DRI2
[ 11367.764] (II) LoadModule: "glx"
[ 11367.764] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 11367.773] (II) Module glx: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Server Extension
[ 11367.773] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 11367.773] Loading extension GLX
[ 11367.773] (II) LoadModule: "nvidia"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11367.773] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Video Driver
[ 11367.773] (II) LoadModule: "mouse"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 11367.773] (II) Module mouse: vendor="X.Org Foundation"
[ 11367.773] compiled for 1.14.0, module version = 1.9.0
[ 11367.773] Module class: X.Org XInput Driver
[ 11367.773] ABI class: X.Org XInput driver, version 19.1
[ 11367.773] (II) LoadModule: "kbd"
[ 11367.774] (WW) Warning, couldn't open module kbd
[ 11367.774] (II) UnloadModule: "kbd"
[ 11367.774] (II) Unloading kbd
[ 11367.774] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11367.774] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 11367.774] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11367.774] (--) using VT number 7
[ 11367.774] (II) Loading sub module "fb"
[ 11367.774] (II) LoadModule: "fb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11367.774] (II) Module fb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11367.774] (II) Loading sub module "wfb"
[ 11367.774] (II) LoadModule: "wfb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11367.774] (II) Module wfb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "shadow"
[ 11367.774] (II) LoadModule: "shadow"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 11367.774] (II) Module shadow: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.1.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "ramdac"
[ 11367.774] (II) LoadModule: "ramdac"
[ 11367.774] (II) Module "ramdac" already built-in
[ 11367.774] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11367.774] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11367.775] (==) NVIDIA(0): RGB weight 888
[ 11367.775] (==) NVIDIA(0): Default visual is TrueColor
[ 11367.775] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11367.775] (**) NVIDIA(0): Option "NoLogo" "true"
[ 11367.775] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseEDID" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 11367.775] (**) NVIDIA(0): Enabling 2D acceleration
[ 11367.775] (**) NVIDIA(0): Ignoring EDIDs
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 11367.775] (**) NVIDIA(0): mode
[ 11368.299] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 11368.300] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680M (GK104) at PCI:1:0:0 (GPU-0)
[ 11368.300] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 11368.300] (--) NVIDIA(0): VideoBIOS: 80.04.29.00.01
[ 11368.300] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11368.300] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680M at PCI:1:0:0
[ 11368.300] (--) NVIDIA(0): none
[ 11368.300] (II) NVIDIA(0): Validated MetaModes:
[ 11368.300] (II) NVIDIA(0): "nvidia-auto-select"
[ 11368.300] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 11368.300] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 11368.300] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 11368.300] (--) Depth 24 pixmap format is 32 bpp
[ 11368.300] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 11368.300] (II) NVIDIA: access.
[ 11368.304] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11368.304] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 11368.304] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11368.304] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11368.304] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11368.304] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 11368.304] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 11368.304] (II) NVIDIA(0): Config Options in the README.
[ 11368.304] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 11368.308] Loading extension NV-GLX
[ 11368.312] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11368.312] (==) NVIDIA(0): Backing store disabled
[ 11368.312] (==) NVIDIA(0): Silken mouse enabled
[ 11368.312] (==) NVIDIA(0): DPMS enabled
[ 11368.312] Loading extension NV-CONTROL
[ 11368.312] (II) Loading sub module "dri2"
[ 11368.312] (II) LoadModule: "dri2"
[ 11368.312] (II) Module "dri2" already built-in
[ 11368.312] (II) NVIDIA(0): [DRI2] Setup complete
[ 11368.312] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 11368.312] (--) RandR disabled
[ 11368.316] (II) Initializing extension GLX
[ 11368.342] (II) Using input driver 'mouse' for '<default pointer>'
[ 11368.342] (**) Option "CorePointer" "on"
[ 11368.342] (**) <default pointer>: always reports core events
[ 11368.342] (WW) <default pointer>: No Device specified, looking for one...
[ 11368.422] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 11368.422] (--) <default pointer>: Device: "/dev/input/mice"
[ 11368.422] (==) <default pointer>: Protocol: "Auto"
[ 11368.422] (**) <default pointer>: always reports core events
[ 11368.422] (**) Option "Device" "/dev/input/mice"
[ 11368.475] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 11368.475] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 11368.475] (**) <default pointer>: Buttons: 9
[ 11368.475] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 11368.475] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 11368.475] (**) <default pointer>: (accel) acceleration profile 0
[ 11368.475] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 11368.475] (**) <default pointer>: (accel) acceleration threshold: 4
[ 11368.475] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 11368.769] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 11368.769] (II) LoadModule: "kbd"
[ 11368.769] (WW) Warning, couldn't open module kbd
[ 11368.769] (II) UnloadModule: "kbd"
[ 11368.769] (II) Unloading kbd
[ 11368.769] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11368.769] (EE) No input driver matching `kbd'
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11368.772] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11368.772] setversion 1.4 failed
[ 11368.772] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event1)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event2)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse0)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event16)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event18)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event8)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11374.183] (II) UnloadModule: "mouse"
[ 11374.199] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 11374.200] (EE) Server terminated successfully (0). Closing log file.
I'm not willing to give up and install/build the drivers from the cuda SDK just yet so any help would be greatly appreciated.
Last edited by tim (2013-10-02 08:20:49)So in simple terms, the fix invovled ensuring the nvidia module is loaded before the bbswitch module. I'm not sure about the necessity of the things that follow but the fix may possibly also require removing bumblebee and possibly requires removing nvidia from repos and building the driver downloaded from nvidia.
This fix could be completely unrelated to the problems I was having with arch but I cannot verify the fix on arch specifically cos I installed every distro under the sun trying to get it all working and I got it to work on a non arch distro.
So... I'm not sure if I should really mark this a solved because I haven't/can't verify it on arch and technically the solution involved changing to another distro but in fact, I know it has absolutely nothing to do with arch since I saw the same behaviour on 3 other distros. If I have time, I will reinstall arch and verify but for the moment, I have a lot of work to catch up on now that I have a working nvidia driver I can actually use for dev
Anyway, what I think is going on is there is some bizarre issue with bbswitch that stops the nvidia driver from being found because on the current distro I have installed, if I have no bbswitch, no bumblebee and no nvidia modules loaded or services running etc. I can modprobe the nvidia driver and all works fine. I can then modprobe the bbswitch driver and that works too. IF I modprobe the bbswitch driver first and then modprobe the nvidia driver, I get this error that says the nvidia module cant be found. The location it prints is in some updates directory whcih is odd too because I installed from nvidia source and never installed updates at all and made sure that there were absolutely no repo nvidia drivers or updates etc.
Last edited by tim (2013-10-02 08:35:39) -
My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime. -
I am installing policy agent 2.2 for apache web server 2.0.52, after the installation, I get the following error while trying to start apache web server:
Cannot load /policyagent/agents/apache/lib/libamapc2.so into server: /policyagent/agents/apache/lib/libamapc2.so: undefined symbol: ZNSt24_default_alloc_templateILb1ELi0EE12_S_free_listE
Any ideas?Are you using the version of Apache that comes with Solaris?
A caution note in chapter 3 of Sun Java System Access Manager Policy Agent 2.2 Guide for Apache HTTP Server 2.0.54 says that version of
Apache is incomplete. Below is the link below that is the entire caution note:
http://docs.sun.com/app/docs/doc/819-4770/6n6ta765h?a=view
Do not use the version of Apache HTTP Server that comes bundled with SolarisTM 9 Operating System or with Solaris 10 Operating System. The bundled Apache HTTP Server package is incomplete. Any attempt to Install Agent for Apache HTTP Server on a bundled version of Apache HTTP Server is likely to fail.
Therefore, download the desired version of Apache HTTP Server from the Apache web site at http://www.apache.org/ before attempting to install the agent.
______________________________ -
/usr/local/lib/libgfortran.3.dylib: mach-o, but wrong architecture
Hello every one,
I am an absolutely new mac user. I need to run a couple of softwares for my research but I faced errors that I really can not understand. There is an Unix executable and a .f Fortran file in each folder that I use. As I run the executable the following error appears:
dyld: Library not loaded: /usr/local/lib/libgfortran.3.dylib
Referenced from: /Users/somaiehbeladi/Desktop/100601stereo/combine_segments/combinesegs
Reason: no suitable image found. Did find:
/usr/local/lib/libgfortran.3.dylib: mach-o, but wrong architecture
/usr/local/lib/libgfortran.3.dylib: mach-o, but wrong architecture
Trace/BPT trap
logout
However, the libgfortran.3.dylib is already in the mentioned directoty and I used the File command on it which gives
Somaieh-Beladis-MacBook:lib somaiehbeladi$ File libgfortran.3.dylib
libgfortran.3.dylib: Mach-O dynamically linked shared library ppc
Then I tried the otool -L command
Somaieh-Beladis-MacBook:combine_segments somaiehbeladi$ otool -L combine_segs
-bash: otool: command not found
So, could you please let me know how I should find out the proper architecture for my executable and then how to change the architecture.
Many thanks in advance.It looks as though you are using an executable compiled for an Intel processor but have the PowerPC versions of the gfortran libraries installed.
How did you install this software?
Which version of OS X are you using?
Ar you using a PowerPC-based Mac, or an Intel-based Mac? -
Clamav: smtp error 4.7.1 Cannot load spam filter bmiEndHeaders
I mus be having a case of the mondays.
I'm trying to get calmav working with Message Server 6.3. I have applied patch 120229-25.
The error i'm getting is "SMTP error 4.7.1 Cannot load spam filter bmiEndHeaders" when trying to send email.
Message Server version
bash-3.00# /opt/SUNWmsgsr/sbin/imsimta version
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:09:30, Oct 12 2007; 32bit)
SunOS com1 5.10 Generic_127112-05 i86pc i386 i86pcimta.cnf
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D destinationspamfilter1optin virus
ims-ms-daemonbottom of option.dat
! ClamAV settings
spamfilter1_config_file=/opt/SUNWmsgsr/config/clamav.opt
spamfilter1_library==/opt/SUNWmsgsr/lib/libclamav.so
spamfilter1_string_action=data:,require ["jettison"]; jettison;clamav.opt
! ClamAV Settings
debug=1
host=127.0.0.1
port=3310
mode=1file permissions
bash-3.00# ls -la /opt/SUNWmsgsr/config/clamav.opt
-rw-r--r-- 1 mailsrv mail 58 Feb 5 09:41 /opt/SUNWmsgsr/config/clamav.opt
bash-3.00# ls -la /opt/SUNWmsgsr/config/option.dat
-rw-r----- 1 mailsrv mail 1298 Feb 5 11:16 /opt/SUNWmsgsr/config/option.dat
bash-3.00# ls -la /opt/SUNWmsgsr/config/imta.cnf
-rw-r----- 1 mailsrv mail 4069 Feb 5 11:17 /opt/SUNWmsgsr/config/imta.cnfHere is the clamconf
bash-3.00# /opt/csw/bin/clamconf
/opt/csw/etc/clamd.conf: clamd directives
LogFile = "/opt/csw/var/clamav/clamd.log"
LogFileUnlock = no
LogFileMaxSize = 1048576
LogTime = yes
LogClean = no
LogVerbose = no
LogSyslog = yes
LogFacility = "LOG_LOCAL6"
PidFile = "/opt/csw/var/clamav/clamd.pid"
TemporaryDirectory not set
ScanPE = yes
ScanELF = yes
DetectBrokenExecutables = no
ScanMail = yes
MailFollowURLs = no
MailMaxRecursion = 64
PhishingSignatures = yes
PhishingScanURLs = yes
PhishingAlwaysBlockCloak = no
PhishingAlwaysBlockSSLMismatch = no
PhishingRestrictedScan = yes
DetectPUA = no
AlgorithmicDetection = yes
ScanHTML = yes
ScanOLE2 = yes
ScanPDF = no
ScanArchive = yes
ArchiveMaxFileSize = 10485760
ArchiveMaxRecursion = 8
ArchiveMaxFiles = 1000
ArchiveMaxCompressionRatio = 250
ArchiveLimitMemoryUsage = no
ArchiveBlockEncrypted = no
ArchiveBlockMax = no
DatabaseDirectory = "/opt/csw/share/clamav"
TCPAddr not set
TCPSocket = 3310
LocalSocket = "/opt/csw/var/clamav/clamd.sock"
MaxConnectionQueueLength = 15
StreamMaxLength = 10485760
StreamMinPort = 1024
StreamMaxPort = 2048
MaxThreads = 10
ReadTimeout = 120
IdleTimeout = 30
MaxDirectoryRecursion = 15
FollowDirectorySymlinks = no
FollowFileSymlinks = no
ExitOnOOM = no
Foreground = no
Debug = yes
LeaveTemporaryFiles = no
FixStaleSocket = yes
User = "clamav"
AllowSupplementaryGroups = no
SelfCheck = 1800
VirusEvent not set
ClamukoScanOnAccess not set
ClamukoScanOnOpen not set
ClamukoScanOnClose not set
ClamukoScanOnExec not set
ClamukoIncludePath not set
ClamukoExcludePath not set
ClamukoMaxFileSize = 5242880
DevACOnly not set
DevACDepth not setand the directory permissions for clamav
bash-3.00# ls -la /opt/csw/var/clamav/clamd.log /opt/csw/var/clamav/clamd.pid /opt/csw/share/clamav /opt/csw/var/clamav/clamd.sock
-rw-r----- 1 clamav clamav 10409 Feb 5 10:46 /opt/csw/var/clamav/clamd.log
-rw-rw---- 1 clamav clamav 5 Feb 5 10:46 /opt/csw/var/clamav/clamd.pid
srwxrwxrwx 1 clamav clamav 0 Feb 5 10:46 /opt/csw/var/clamav/clamd.sock
/opt/csw/share/clamav:
total 22198
drwxr-xr-x 3 clamav clamav 512 Feb 5 10:46 .
drwxr-xr-x 9 root bin 512 Feb 4 14:27 ..
drwxr-xr-x 2 clamav clamav 512 Feb 5 10:46 daily.inc
-rw-r--r-- 1 clamav clamav 11347852 Feb 4 14:55 main.cvdTelnet to localhost 3310 gives:Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
UNKNOWN COMMAND
Connection to localhost closed by foreign host.I enabled logging on ims-ms channel
I now have a mail.log_current
06-Feb-2008 09:51:42.16 tcp_intranet ims-ms EE 3 [email protected] rfc822;[email protected] karlr@ims-ms-daemon
06-Feb-2008 09:51:42.40 ims-ms D 3 [email protected] rfc822;[email protected] karlr@ims-ms-daemon
06-Feb-2008 09:52:28.90 tcp_intranet ims-ms EE 3 [email protected] rfc822;[email protected] karlr@ims-ms-daemon
06-Feb-2008 09:52:29.14 ims-ms D 3 [email protected] rfc822;[email protected] karlr@ims-ms-daemon Just to recap
imta.cnf
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fil
einto $U+$S@$D destinationspamfilter1 logging
ims-ms-daemonclamav.opt
! ClamAV Settings
host=127.0.0.1
port=3310
mode=0
field=
debug=1option.dat
! ClamAV settings
spamfilter1_config_file=/opt/SUNWmsgsr/config/clamav.opt
spamfilter1_library=/opt/SUNWmsgsr/lib/libclamav.so
spamfilter1_string_action=data:,require ["jettison"]; jettison;
spamfilter1_optional=1With spamfilter1_optional=1 removed i get an error
"Error reading ClamAV options" -
Apache start fails on Content server
Hi ,
I have installed Content server 6.40 on AIX 5.3 with Apache server 2.2.4
However after successful installation of MaxDB instance and Content Server
the apache fails to restart or stop and gives the below message:
./apachectl -k start
httpd: Syntax error on line 54 of /usr/users/sapcs/conf/httpd.conf: Cannot load
/usr/users/sapcs/modules/mod_sapcs2.o into server: \t0509-022 Cannot load module /usr/users/sapcs/modules/mod_sapcs2.o.\n\t0509-103 The module has an invalid magic number.
Are there are any modifications required for http.conf? I could not find much help on sap notes.
thanks in advance,
MuraliHi,
Can u please provide more details on how you solved the problem?
We are facing the same problem , we are installing SAP content server 6.40 with apache 2.0.63.
Thanks,
Jay -
Dear all,
We are expriencing an error after a redirected restore, we are restored a backup of a prod system on a new host.
While running a 'brrestore' command to get the restore, it returns the following error:
BR0401I BRRESTORE 7.40 (8)
BR0169I Value 'util_file_online' of parameter/option 'backup_dev_type/-d' ignored for 'brrestore' - 'util_file' assumed
BR0405I Start of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0484I BRRESTORE log file: /oracle/SID/sapbackup/reojarkx.rsb
BR0278E Command output of '/oracle/SID/112_64/bin/sqlplus':
exec(): 0509-036 Cannot load program sqlplus because of the following errors:
0509-130 Symbol resolution failed for sqlplus because:
0509-136 Symbol ___strcmp64 (number 71) is not exported from
dependent module /usr/lib/libc.a[shr_64.o].
0509-136 Symbol ___strcpy64 (number 76) is not exported from
dependent module /usr/lib/libc.a[shr_64.o].
0509-136 Symbol __setjmp (number 78) is not exported from
dependent module /usr/lib/libc.a[shr_64.o].
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0279E Return code from '/oracle/SID/112_64/bin/sqlplus': 255
BR0302E SQLPLUS call for database instance SID failed
BR0406I End of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0404I BRRESTORE terminated with errors
Can someone help to get the reason of this issue.
Thanks, regardsRoman,
how can you know that it is about AIX? The OP didn't tell us.
Besides that, I agree that different OS versions may be the root cause.
regards -
Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into serve
Dear All,
Getting following error while trying to start http server service.
"Syntax error on line 1 of d:\oracle\oracle\apache\apache\conf\mod_ose.conf
Cannot load d:\oracle\apache\apache\apache\modules\orajipa8i.dll into server"
Pls tell me the work arounds.
Thanks,
Sathis.I am getting the same error message on my side.
Were you able to get around the problem? Thank you. -
Cannot load underlying module for 'Darwin'
I had to move my "Developer" account from some external drive to the internal drive of my Mac.
For this I zipped the users folder, copied to the internal "users" drive and unzipped it there.
Then I changed the users folder in the users settings. I also updated the permissions on the user "Developer" folder,
allowing admins "R&W", the user "R&W" (+ setting it as owner) and everyone else no permissions.
I was able to login to the new home dir. I opened my old Xcode project (that was updated automatically in some fashion).
But when I compile it I get the error "cannot load underlying module for 'Darwin'"
=> What went wrong ?
Btw:
I already removed Xcode, downloaded it again and placed it into the programs folder - same issue ... :-)Here is the stack trace:
<unknown>:0: error: cannot load underlying module for 'Darwin'
0 swift 0x00000001025fe968 llvm::sys::PrintStackTrace(__sFILE*) + 40
1 swift 0x00000001025fee54 SignalHandler(int) + 452
2 libsystem_platform.dylib 0x00007fff828c1f1a _sigtramp + 26
3 libsystem_platform.dylib 0x0000000000000028 _sigtramp + 2104746280
4 swift 0x0000000101b63588 swift::ModuleFile::getType(swift::Fixnum<31u, unsigned int>) + 856
5 swift 0x0000000101b6936b swift::ModuleFile::getDecl(swift::Fixnum<31u, unsigned int>, swift::Optional<swift::DeclContext*>) + 16027
6 swift 0x0000000101b81671 swift::ModuleFile::loadExtensions(swift::NominalTypeDecl*) + 385
7 swift 0x0000000101bbbd01 swift::SerializedModuleLoader::loadExtensions(swift::NominalTypeDecl*, unsigned int) + 49
8 swift 0x00000001029683af swift::ASTContext::loadExtensions(swift::NominalTypeDecl*, unsigned int) + 63
9 swift 0x00000001029c5339 swift::NominalTypeDecl::getExtensions() + 73
10 swift 0x00000001029ec9e6 swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 22
11 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
12 swift 0x0000000101c1123f (anonymous namespace)::SwiftDeclConverter::recordObjCOverride(swift::AbstractFunctionDecl* ) + 191
13 swift 0x0000000101c047ab (anonymous namespace)::SwiftDeclConverter::VisitObjCMethodDecl(clang::ObjCMethodDecl const*, swift::DeclContext*, bool) + 2299
14 swift 0x0000000101bfffb4 clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3076
15 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
16 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
17 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
18 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
19 swift 0x00000001029c313c swift::NominalTypeDecl::getMembers(bool) const + 28
20 swift 0x00000001029eca1f swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 79
21 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
22 swift 0x0000000101c04b17 (anonymous namespace)::SwiftDeclConverter::VisitObjCPropertyDecl(clang::ObjCPropertyDecl const*, swift::DeclContext*) + 183
23 swift 0x0000000101bfffea clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3130
24 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
25 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
26 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
27 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
28 swift 0x00000001029c35f5 swift::ExtensionDecl::getMembers(bool) const + 21
29 swift 0x00000001029ec9fd swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 45
30 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
31 swift 0x0000000101c04b17 (anonymous namespace)::SwiftDeclConverter::VisitObjCPropertyDecl(clang::ObjCPropertyDecl const*, swift::DeclContext*) + 183
32 swift 0x0000000101bfffea clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3130
33 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
34 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
35 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
36 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
37 swift 0x00000001029c35f5 swift::ExtensionDecl::getMembers(bool) const + 21
38 swift 0x00000001029ec9fd swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 45
39 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
40 swift 0x0000000101c04b17 (anonymous namespace)::SwiftDeclConverter::VisitObjCPropertyDecl(clang::ObjCPropertyDecl const*, swift::DeclContext*) + 183
41 swift 0x0000000101bfffea clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3130
42 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
43 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
44 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
45 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
46 swift 0x00000001029c35f5 swift::ExtensionDecl::getMembers(bool) const + 21
47 swift 0x00000001029ec9fd swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 45
48 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
49 swift 0x0000000101c1123f (anonymous namespace)::SwiftDeclConverter::recordObjCOverride(swift::AbstractFunctionDecl* ) + 191
50 swift 0x0000000101c047ab (anonymous namespace)::SwiftDeclConverter::VisitObjCMethodDecl(clang::ObjCMethodDecl const*, swift::DeclContext*, bool) + 2299
51 swift 0x0000000101bfffb4 clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3076
52 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
53 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
54 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
55 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
56 swift 0x00000001029c35f5 swift::ExtensionDecl::getMembers(bool) const + 21
57 swift 0x00000001029ec9fd swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 45
58 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
59 swift 0x0000000101c04b17 (anonymous namespace)::SwiftDeclConverter::VisitObjCPropertyDecl(clang::ObjCPropertyDecl const*, swift::DeclContext*) + 183
60 swift 0x0000000101bfffea clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3130
61 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
62 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
63 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
64 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
65 swift 0x00000001029c35f5 swift::ExtensionDecl::getMembers(bool) const + 21
66 swift 0x00000001029ec9fd swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 45
67 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
68 swift 0x0000000101c04b17 (anonymous namespace)::SwiftDeclConverter::VisitObjCPropertyDecl(clang::ObjCPropertyDecl const*, swift::DeclContext*) + 183
69 swift 0x0000000101bfffea clang::declvisitor::Base<clang::declvisitor::make_const_ptr, (anonymous namespace)::SwiftDeclConverter, swift::Decl*>::Visit(clang::Decl const*) + 3130
70 swift 0x0000000101bff37c swift::ClangImporter::Implementation::importDeclImpl(clang::NamedDecl const*, bool&, bool&) + 316
71 swift 0x0000000101c03ad2 swift::ClangImporter::Implementation::importDeclAndCacheImpl(clang::NamedDecl const*, bool) + 226
72 swift 0x0000000101c07d3e swift::ClangImporter::Implementation::loadAllMembers(swift::Decl const*, unsigned long long, bool*) + 1486
73 swift 0x00000001029ccb56 swift::IterableDeclContext::loadAllMembers() const + 102
74 swift 0x00000001029c35f5 swift::ExtensionDecl::getMembers(bool) const + 21
75 swift 0x00000001029ec9fd swift::NominalTypeDecl::lookupDirect(swift::DeclName) + 45
76 swift 0x00000001029eae8a swift::DeclContext::lookupQualified(swift::Type, swift::DeclName, unsigned int, swift::LazyResolver*, llvm::SmallVectorImpl<swift::ValueDecl*>&) const + 3178
77 swift 0x00000001028ebd20 swift::TypeChecker::lookupMember(swift::Type, swift::DeclName, swift::DeclContext*, bool) + 112
78 swift 0x00000001028ec3c2 swift::TypeChecker::lookupConstructors(swift::Type, swift::DeclContext*) + 34
79 swift 0x00000001028c965a swift::TypeChecker::addImplicitConstructors(swift::NominalTypeDecl*, llvm::SmallVectorImpl<swift::Decl*>&) + 1050
80 swift 0x00000001028c253d swift::TypeChecker::checkInheritanceClause(swift::Decl*, swift::DeclContext*, swift::GenericTypeResolver*) + 5213
81 swift 0x00000001028c459f swift::TypeChecker::validateDecl(swift::ValueDecl*, bool) + 1631
82 swift 0x00000001028d2ebf swift::ASTVisitor<(anonymous namespace)::DeclChecker, void, void, void, void, void, void>::visit(swift::Decl*) + 2287
83 swift 0x00000001028c3f0b swift::TypeChecker::typeCheckDecl(swift::Decl*, bool) + 123
84 swift 0x00000001028aa1d8 swift::performTypeChecking(swift::SourceFile&, swift::TopLevelContext&, unsigned int) + 1384
85 swift 0x0000000101bdf5dd swift::CompilerInstance::performSema() + 2381
86 swift 0x0000000101944788 frontend_main(llvm::ArrayRef<char const*>, char const*, void*) + 2008
87 swift 0x000000010194286d main + 1677
88 libdyld.dylib 0x00007fff849515c9 start + 1
Stack dump:
0. Program arguments: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/bin/swift -frontend -c /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/Speaker.swift -primary-file /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/EventViewController.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeechTableViewCell.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeechDAO.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeechTableViewController .swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/BaseViewController.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/MyCoreDataUtil.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeakerViewController.swi ft /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeakerExtension.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/MyGraficsUtil.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeakerDAO.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/Speech.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeechViewController.swif t /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/AppDelegate.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/EventDAO.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeakerTableViewCell.swif t /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/Event.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/EventTableViewController. swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/BaseTableViewController.s wift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/EventExtension.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/AppDelegate2.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/EventTableViewCell.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeechExtention.swift /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/SpeakerTableViewControlle r.swift -target x86_64-apple-ios7.1 -target-cpu core2 -sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/D eveloper/SDKs/iPhoneSimulator8.2.sdk -I /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Products/Debug-iphonesimulator -F /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Products/Debug-iphonesimulator -g -import-objc-header /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/MyEvent-Bridging-Header.h -module-cache-path /Users/developer/Library/Developer/Xcode/DerivedData/ModuleCache -Xcc -I/Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfi sevremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.bui ld/swift-overrides.hmap -Xcc -iquote -Xcc /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /MyEvent-generated-files.hmap -Xcc -I/Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfi sevremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.bui ld/MyEvent-own-target-headers.hmap -Xcc -I/Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfi sevremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.bui ld/MyEvent-all-target-headers.hmap -Xcc -iquote -Xcc /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /MyEvent-project-headers.hmap -Xcc -I/Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfi sevremphydfg/Build/Products/Debug-iphonesimulator/include -Xcc -I/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchai n/usr/include -Xcc -I/Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfi sevremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.bui ld/DerivedSources/x86_64 -Xcc -I/Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfi sevremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.bui ld/DerivedSources -Xcc -DDEBUG=1 -emit-module-doc-path /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /Objects-normal/x86_64/EventViewController~partial.swiftdoc -Onone -module-name MyEvent -emit-module-path /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /Objects-normal/x86_64/EventViewController~partial.swiftmodule -serialize-diagnostics-path /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /Objects-normal/x86_64/EventViewController.dia -emit-dependencies-path /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /Objects-normal/x86_64/EventViewController.d -o /Users/developer/Library/Developer/Xcode/DerivedData/MyEvent-duznkkgndabyibfise vremphydfg/Build/Intermediates/MyEvent.build/Debug-iphonesimulator/MyEvent.build /Objects-normal/x86_64/EventViewController.o
1. While type-checking 'EventViewController' at /Users/developer/_CloudStation/Work2/MyEvent5/MyEvent/EventViewController.swift :11:1
2. While reading from /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/ usr/lib/swift/iphonesimulator/Foundation.swiftmodule
3. While deserializing decl #105 (EXTENSION_DECL) -
Cannot load login module class
Hi,
i'm working on customizing Login Module now.
i have bulit the project and deploy the SDA file follow this link "[sap help|http://help.sap.com/saphelp_nw70/helpdata/en/76/08b34095070361e10000000a155106/frameset.htm]".
My Java project name is: MyLoginModule, with class file "MyLoginModuleClass" in "com.mycompany" package.
And my library project name is: MyLoginModuleLibrary, with "MyLoginModule.jar" in Jars,
and with "security_api" "com.sap.tc.logging" "com.sap.engin.lib.add_ejb" "security.class" "com.sap.security.api.sda" "com.sap.security.core.sda" in reference
After these steps, logon is failed.
and i get some log using "Note 1045019 - Web diagtool" below:
LOGIN.FAILED
User: N/A
Authentication Stack: ticket
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule
--- SUFFICIENT ok false true
2. com.mycompany.MyLoginModuleClass
--- OPTIONAL Cannot load login module class. com.mycompany.MyLoginModuleClass
Found in negative cache
---Loader Info ---
ClassLoader name: [common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;
service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore
Parent loader name: [Frame ClassLoader]
References:
Why didn't i see MyLoginModuleLibrary in "ClassLoader name" though i've add it in ConfigTool already.
Maybe this is the reason "cannot load login module calss com.mycompany.MyLoginModule"?
Any suggestion?
Regards,
Fishyhi
this will give some idea
http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/23e4407211732ae10000000a155106/content.htm
http://docs.sun.com/app/docs/doc/820-4801/gbyuw?a=view
Re: Deploying a custom login module to the J2EE engine
bvr
Edited by: bvr on May 7, 2009 12:53 PM -
Cannot Load Evtouch Module for Touch Screen
I cannot seem to load the evtouch module I need for the touch screen on my laptop. This is the error I get in the Xorg.0.log file in /var/log - any ideas? Is there a way I can recompile this for the cuurent xorg server version?
(II) LoadModule: "evtouch"
(II) Loading /usr/lib/xorg/modules/input//evtouch_drv.so
(II) Module evtouch: vendor="Kenan Esau"
compiled for 4.3.99.902, module version = 0.8.8
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(EE) module ABI major version (2) doesn't match the server's version (4)
(II) UnloadModule: "evtouch"
(II) Unloading /usr/lib/xorg/modules/input//evtouch_drv.so
(EE) Failed to load module "evtouch" (module requirement mismatch, 0)I have patched the evtouch source using Ubuntu diff file for this package (and other modifications to make it work with hal). It is loaded correctly now, but it doesn't work. When I touch the screen with the pen the mouse pointer goes to the upper left or down right corner. I made the calibration with ubuntu live and it works under ubuntu. Do you have the same problem with Arch?
EDIT: nevermind, I tried Ubuntu's binary and it worked, then I realized I forgot another debian patch. Adding this patch to the package I've made I got a working driver.
Last edited by gborzi (2009-04-25 19:37:30) -
Cannot load login module , Found in negative cache?
Hello All,
I am trying out the SSO with Header Variable Login , by adding the UserId into the Header Variable.
I am able to login to the Portal as per the steps given in "HeaderVariableLoginModule" http://help.sap.com/saphelp_nw04/helpdata/en/d0/a3d940c2653126e10000000a1550b0/frameset.htm
There is another extension of HeaderVariableLoginModule called the IPHeaderVariableLoginModule, which allows login only if the request comes from the specified IP address.
But after trying this i am getting the foll error :
Cannot load login module class de.platinion.security.IPHeaderLoginModule.
[EXCEPTION]
java.lang.ClassNotFoundException: de.platinion.security.IPHeaderLoginModule
Found in negative cache
Loader Info -
ClassLoader name: [common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore]
Parent loader name: [Frame ClassLoader]
I have followed the steps given in the document, https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/069eaf4b-0901-0010-6e89-d1fcceebcbf1
but still am getting the same error,
I guess it has something to do with the ClassLoader or classpath coz it gives a ClassNotFoundException, but am not able to find a solution..
Could some1 help me out??
Thanks,
MeghanaHi!
Did you found any solution to this? I have the same error. (NW04s SP13)
Br
Anton Renberg -
Hi all,
Is there any restriction on Mac OS X 10.6/10.7 that binaries running from root directories like /usr/libexec/ cannot load dylib's at run-time using dlopen() or NSAddImage()?
I am trying to run a binary like "sample" from a directory inside /usr/libexec/ which tries to load a dylib like "sample.dylib" which is present in the same directory as "sample".
It resulted in a segmentation fault with the following error and stack-trace.
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_INVALID_ADDRESS at address: 0x0000000000003430
0x0000000000003430 in ?? ()
Using gdb, I could find out that the program crashed inside dlopen() (the path passed to dlopen() being a simple filename like "sample.dylib").
The dlopen() at the top of the stack-trace pasted below gets called around 10 times; it does not crash during this 2nd level dlopen() any-time.
#0 0x00007fff81be9e93 in dlopen ()
#1 0x00007fff82838f7f in map_images_nolock ()
#2 0x00007fff82821bc0 in map_images ()
#3 0x00007fff5fc039b9 in __dyld__ZN4dyldL18notifyBatchPartialE17dyld_image_statesbPFPKcS0_jPK15dyld_imag e_infoE ()
#4 0x00007fff5fc0c839 in __dyld__ZN11ImageLoader4linkERKNS_11LinkContextEbbRKNS_10RPathChainE ()
#5 0x00007fff5fc04d48 in __dyld__ZN4dyld4linkEP11ImageLoaderbRKNS0_10RPathChainE ()
#6 0x00007fff5fc08f68 in __dyld_dlopen ()
#7 0x00007fff81be9ec0 in dlopen ()
#8 0x000000010002694f in AAA ()
#9 0x0000000100026730 in XXX ()
#10 0x0000000100026494 in YYY ()
#15 0x00000001000566a9 in main (argc=7, argv=0x7fff5fbff810) at ../../main.c:50
After this 2nd level dlopen() gets called 10-15 times, the stack will unwind from map_images_nolock () till __dyld_dlopen (). But when it tries to finish all the instructions inside __dyld_dlopen () and step out of it, the program crashes with the EXC_BAD_ACCESS signal.
Please find below the final stack-traces obtained during debugging when I put breakpoints for AAA() and dlopen() and went on stepping inside till the program crashed.
(gdb) bt
#0 0x00007fff5fc04d48 in __dyld__ZN4dyld4linkEP11ImageLoaderbRKNS0_10RPathChainE ()
#1 0x00007fff5fc08f68 in __dyld_dlopen ()
#2 0x00007fff81be9ec0 in dlopen ()
#3 0x000000010002694f in AAA ()
#4 0x0000000100026730 in XXX ()
#5 0x000000010002663c in YYY ()
#11 0x00000001000566a9 in main (argc=7, argv=0x7fff5fbff7f0) at main.c:50
(gdb) step
Single stepping until exit from function __dyld__ZN4dyld4linkEP11ImageLoaderbRKNS0_10RPathChainE,
which has no line number information.
0x00007fff5fc08f68 in __dyld_dlopen ()
(gdb) bt
#0 0x00007fff5fc08f68 in __dyld_dlopen ()
#1 0x00007fff81be9ec0 in dlopen ()
#2 0x000000010002694f in AAA ()
#3 0x0000000100026730 in XXX ()
#4 0x000000010002663c in YYY ()
#10 0x00000001000566a9 in main (argc=7, argv=0x7fff5fbff7f0) at ../../main.c:50
(gdb) step
Single stepping until exit from function __dyld_dlopen,
which has no line number information.
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_INVALID_ADDRESS at address: 0x0000000000003430
0x0000000000003430 in ?? ()
To summarise:
For some reason, a user wants to install a product and its binaries under /usr/libexec/.
This binary tries to dynamically load a dylib using dlopen("sample.dylib", RTLD_LAZY | RTLD_LOCAL).
It looks like, the dynamic linker then opens dependent dylibs and runs module initialisers. Then crashes when returning (which sounds like a trashed stack).
Can anyone please tell me whether there is some OS-imposed restriction or OS bug which can explain this type of behaviour?
(Note: The crash does not occur if the binary and dylib are installed under a normal user's home directory and run from there.)
Many thanks,
VinayThe otool output for the binary and dylib are pasted below.
localhost:Latest dev$ otool -L /usr/libexec/Dipu/sample/sample
/usr/libexec/Dipu/sample/sample:
/System/Library/Frameworks/IOKit.framework/Versions/A/IOKit (compatibility version 1.0.0, current version 275.0.0)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 476.18.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.4.0)
/usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.4)
localhost:Latest dev$ otool -L /usr/libexec/Dipu/sample/sample.dylib
/usr/libexec/Dipu/sample/sample.dylib:
libProduct.dylib (compatibility version 1.0.0, current version 1.0.0)
/System/Library/Frameworks/Carbon.framework/Versions/A/Carbon (compatibility version 2.0.0, current version 136.0.0)
/System/Library/Frameworks/IOKit.framework/Versions/A/IOKit (compatibility version 1.0.0, current version 275.0.0)
/usr/lib/libstdc++.6.dylib (compatibility version 7.0.0, current version 7.4.0)
/usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.4)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 476.18.0)
Maybe you are looking for
-
HT4796 Hi, I am trying to migrate my data from a windows 7 enterprise machine to a new macbook air.
The two computers connect fine over the wifi network, but the mac only shows one user file - the administrator. There are no error messages. It doesn't show mine (even though I am logged on as me on the PC laptop). I don't have a seperate administr
-
My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! he
-
Hi all, I'm new to JSP and am having a problem with the page buffer. I have a page which uses a for loop to print out the contents of a row from a SQL table. The JSP stops outputting html at different points in the page, depending on the data and the
-
Importing cs3 projects on a mac
Hi, when i try to import my old premiere cs3 files in my new premiere cs4 on my mac, the program send me to the guide. The guide say that it is not possible to do such import (old in new) on a mac, but i can do it in windows (!?). To me this cannot b
-
MegaSky 580 - Presto! Error message "The device is not ready"
Error message "The device is not ready. Please check whether your device is connected correctly." I can see the device in the drop down menu of the settings window, when I select It, I get again the same error message. If I plug off the usb stick, pr