Cannot Locate 3G via MobileMe with OS4
iPhone 3G with OS4 just donwloaded. Seeing a considerable slowing of responses, especially via the keyboard.
* HUGE PROBLEM *
The LOCATION FUNCTION via MobileMe, for some reason, cannot come close to locating my 3G any more. I have other iPhone(s) in the family and even an iPad and all are just fine when located via MobileMe from my Mac (very accurate). The 3G with OS4 is off by 10 miles or more. This NEVER HAPPENED before! Huge flaw... Apple needs to fix this ASAP or I want to go back to old OS! Before the upgrade, I could get within a few houses of locating the 3G. Now I am in a different CITY... I rebooted, etc. No change.
Hi; you may be correct. Not sure of the details. However, bottom line is it worked 100% prior to OS 4. Now the whole "Find My iPhone" process fails ONLY for the 3G w/ OS 4.
Can still find iPad, 3GS w/ OS 3, and a different 3G w/ OS 3. It's just the 3G w/ OS 4 with the problem. I think I will hold off on upgrading other devices a while...
Similar Messages
-
Cannot locate image via Bluetooth
After taking a photo on my Nokia E63 and renaming it on the phone (to make for easier identification & retrieval), I connected my handset to my PC via Bluetooth, but I cannot locate the image on my phone or my memory card. It's the only image that I've stored on my handset that I cannot locate via Bluetooth.
Is there any reason why this may've occurred?ginalv wrote:
Hi and Welcome to the Forums!
Given that, the only thing we can think of to give you is the generic procedure for transferring files to/from a BB:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB05409&slic...
Maybe that'll provide you with what you need. Hopefully. Maybe. Can't tell...
Cheers!
Message Edited by MohA on 06-21-2009 04:48 PM
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Error "cannot locate object' launching app with Web Start
Hello,
I receive the error shown below when launching a Java application and cannot figure out where to begin with debugging. It was developed under Netbeans 5.0.
You can recreate the error by launching this application:
http://www.mikenaglich.net/ztest17.jnlp
Error text and JNLP file follow. I am really puzzled and would appreciate any help. Thanks.
Mike
Error Text
========
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
The system cannot locate the object specified. Error processing resource 'http://www.netbeans.org/jnlp/DTD/jnlp.dtd'.
App JNLP File
===========
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE jnlp PUBLIC "-//Sun Microsystems, Inc.//DTD JNLP 1.5//EN" "http://www.netbeans.org/jnlp/DTD/jnlp.dtd">
<jnlp codebase="http://www.mikenaglich.net" href="ztest17.jnlp">
<information>
<title>ztest17</title>
<vendor>Mike Naglich</vendor>
<homepage href="www.mikenaglich.net"/>
<description> </description>
<icon href="default"/>
<offline-allowed/>
<shortcut online="true">
<desktop/>
</shortcut>
</information>
<resources>
<j2se href="http://java.sun.com/products/autodl/j2se" version="1.4+"/>
</resources>
<resources>
<jar download="eager" href="dist/ztest17.jar" main="false"/>
</resources>
<resources locale="" os="">
<jar download="eager" href="dist/lib/swing-layout-1.0.1.jar" main="false" version=""/>
</resources>
<application-desc main-class="ztest17.Main"/>
</jnlp>I receive the error shown below when launching a Java
application and cannot figure out where to begin with
debugging. There are a number of problems, potential problems,
redundancies and illogicalities in that JNLP file.
...It was developed under Netbeans 5.0. Uh-Huh. I am coming to recognise those
(damnable) NetBeans JNLP files.
You can recreate the error I don't think I need to, your error output and JNLP
file are quite instructive..
...by launching this
application:
http://www.mikenaglich.net/ztest17.jnlp
Error text and JNLP file follow. I am really puzzled
and would appreciate any help. Thanks.
Error Text
========
The XML page cannot be displayed
Cannot view XML input using style sheet. Please
correct the error and then click the Refresh button,
or try again later.
The system cannot locate the object specified. Error
processing resource
'http://www.netbeans.org/jnlp/DTD/jnlp.dtd'.
1) Whenever you see a message from Java,
JavaWS, or an application saying words the the
effect of 'cannot find..', try checking the URL of the
resource in a browser. If a browser comes
up '404' (not found), then the Java tool or app.
will be unable to access it either.
That is the first and fundamental problem with that
JNLP. The DOCTYPE element is not strictly needed
in a JNLP, and I would recommend removing it entirely
rather than try and hunt down any NetBeans DTD.
With the way NB writes JNLP's, I would not trust
a DTD written or controlled by them, in any case.
App JNLP File
===========OK.. I recommend replacing the current JNLP
with the one below, here is a summary of the
changes I made..
- removed DOCTYPE line with reference to '404' DTD
- compacted resource elements, removing empty attributes
- changed ztest17.jar to main='true'
- removed redundant 'download="eager"' attributes as well
as main="false" and version="" from swing-layout.. jar element
- removed broken(?) <icon> element and empty <description>
- changed homepage href to relative
Some of them are guesses, but I'd give it a 90%+
chance of working, if written like this.
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="http://www.mikenaglich.net" href="ztest17.jnlp">
<information>
<title>ztest17</title>
<vendor>Mike Naglich</vendor>
<homepage href="/"/>
<offline-allowed/>
<shortcut online="true">
<desktop/>
</shortcut>
</information>
<resources>
<j2se href="http://java.sun.com/products/autodl/j2se" version="1.4+"/>
<jar href="dist/ztest17.jar" main='true' />
<jar href="dist/lib/swing-layout-1.0.1.jar" />
</resources>
<application-desc main-class="ztest17.Main"/>
</jnlp> Note that a glance inside the ztest17.jar supports
it contains a manifest file tat specifies the main class,
so it might be possible to remove main='true'
altogether - best not for the moment, though. -
Cannot send message via iCloud with movie
Email is sent if I remove my embedded/attached 23MB Quicktime movie is removed but not with the movie - via iCloud.
and my other (non-iCloud) account doesn't send any mail at all.
What is problem(s), please? How to trouble shoot? TIAThank you for info, but I am struggling with using it.
I went into #3 stmp.me.com.myname[STMP] and made changes I wanted to be in conformity with instructions of iCloud: Mail server information.
So now the Account info reads 1: Description = my email address at [email protected]
2: Server name = stmp.me.com
3: Default port 587 was already active
4: Authentication = Password (my iCloud password from Keychain access)
5: Username = my name
6: Password = (my iCloud password from Keychain access)
But got this alert: "Could not save changes. The servers marked with alert icons are in conflict and cannopt be saved. Two servers cannot share the same address and authentication settings. Resolve the conflicts and try again."
I think (look but guessing) that my changes to #3 become in conflict with #4 -- and I don't see how to get out of the conflict (other than not saving the changes I made to #3 in accordance with iCloud: Mail server information.)
I am lost! Should I delete #4? confused and anxious . ....
(Sorry about confusing formatting of post but Apple won't let me show it like I want)
Message was edited by: pwwwayne -
Error message "cannot locate file"
I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?
Have you added all the songs to the library? Just by dragging and dropping?
-
Cannot locate Admin user HP PROBOOK 4720, Windows XP
I was logged in as admin, created a new user account and switched user. That user finished and shut down computer, now I cannot locate my admin setting with all of my documents, pictures, setting, etc. How can I switch back to admin? I do not have that option when I try to switch users, now it just shows me the new user account that I created and when I power up goes straight to that account.
HP Probook 4720
Windows XP
Help! Thanks!Hello CAH75. I understand you're unable to log into your normal account on Windows XP.
Do any of the user accounts which you can access have Administrator privileges? If so, you can try the following.
Log into the account.
Navigate to the Control Panel and locate "User Accounts." Select this.
You should see "change the way that users log on and off"
Uncheck the "use the Welcome screen" box.
Save your changes and reboot the computer.
This will bypass the Welcome screen and take you to a normal username and password login prompt. This should allow you to access the Administrator account. Let me know if this helps!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
I cannot locate an airplay icon on any of my Apple devices to connect airplay to a Pioneer speaker. Any advice would be welcomed!
Can you tell us exactly which Pioneer speaker it is?
-
So basically I tried to back up my itunes library to my external hard drive and when I followed the instructions and then went to play a song it said Orginal file cannot be found. It said that for all of the songs. I'm not sure how to fix what I did, I already tried consolidating and all of that stuff and it didn't locate the files. I'm guessing that I somehow deleted the original songs along the way. I synced my iPhone without knowing what I did and surprisingly all of the music is still on my phone. So now that I've completely screwed up my iTunes account, I need to know how to get all my music back onto my iTunes account and have that library only on my external hard drive, not my computer. Everything looks fine on my iTunes besides the fact that it cannot locate the files but what I'm afraid of is me syncing and backing up my iPhone and then being left with no music because it syncs to the empty songs. How can I fix this? and if I can't fix my iTunes library is there anyway for me to still be able to backup my iphone and all the music on it, without erasing my music?
Well I'm not sure if I correctly backed up my itunes library because when trying to open itunes from that back up it keeps saying original file not found. Okay this is going to sound confusing but bear with me. I "backed up" my itunes, meaning I just dragged and dropped the iTunes folder into my external hardrive, and then I changed the destination on iTunes to open from my external hardrive. It was working fine when I did that, however I did that just on my own, I didn't know about consolidating the files or any of that so I hadn't done that before copying the folder to my external hard drive. I can't remember but I'm pretty sure I deleted the iTunes folder after I had copied it to my external hardrive. So I did that and it was working fine, I was able to open my itunes with my external hardrive. BUT yesterday I thought that I hadn't done it correctly because I didn't consolidate the files and all that, so I wanted to be more thorough and do that, I followed the steps to do that but when I did that I think it got all the files from my computer and not from my external hard drive so it basically didn't find anything on my computer because I had deleted them. And like an idiot, I replaced the iTunes folder on my external hard drive (the one I did correctly the first time), with the one I did wrong. So I believe I pretty much deleted all the music files from both my external hard drive and my computer. Please correct me if I'm wrong?
I believe getting all my music back on my itunes is a lost cause. BUT I still have all my songs and stuff on my iPhone. My question is, if I plug my phone into my computer and sync it, will it erase all my songs from my phone? A little more info, my iTunes still has the names and stuff of all my songs, they just can't be played because the files are missing, my iPhone doesn't need to erase and sync when I plug in my phone because it's already synced to my computer. What I'm afraid of is when I plug in my phone to backup and sync, will it erase my music because it can't find the files on my computer or external hard drive anymore? Or will it just leave the songs because they're already there (on my phone) and only sync the new songs that I've downloaded? I just need to know is my iTunes still going to be functional as far as me being able to backup my phone?
I have a lot of songs purchased from iTunes but a lot (like 60%) are from CDs that I no longer have. So re-downloading my music would only account for 40% of my library. -
I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone
Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.
-
I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number
The activation servers for CS and CS2 stopped working and were taken down. You'll need to take a look at this link for your issue: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Benjamin -
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
hi all
i am using Application server 10g R2 while running report i am getting the following error
Terminated with error: REP-1924: Cannot locate the font file 'Arialbd.ttf'
i configured the Reports_Path
with C:\windows\fonts if anyone faced the same problem plz help me.hi
if you have problem you can post your own thread and we will try to help you.
sarah -
I have a new IMAC with lion. When I use the migration tool from my PC to the new Mac, it takes about 2 hours to transfer my photos and address book, etc. However, when completed, I cannot locate any of the transfered material on the Mac! Any suggestions?
You have posted to the older PPC iMac forum. You need to poster to a newer iMac forum.
I suggest posting here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion?tagSet=1382
Complete list:
https://discussions.apple.com/docs/DOC-2463
Try double clicking on the harddrive icon on your desktop
You should get something like this.
On the left pane is a list of common places.
All the user data is in the /Users folder.
See the magnifying glass on the upper left of the screen. This is spotlight. Type in a file name.
Robert -
This apple ID cannot be used for MobileMe Sign in with a different Apple ID
When I try and use my Apple ID to setup the free find my account on MobileMe I get this error after I hit the OK on the pop that reads Terms of service have changed.
"This apple id cannot be used for MobileMe. Sign in with a differant Apple ID"
I can see the TOS page behind the pop up box my Apple ID is valid
Any Suggestions
Thanks
DennisI'm having the same issue with my iPad. I also used to have MobileMe, but cancelled. I seem to have two Apple ID's with the same email address. One Apple ID is not an email, the other Apple ID is my email address. They have different passwords and I can manage both. My iTunes Store one is the one without the email address. I had to use the email address Apple ID for Game Room.
I am in Live Chat Support with Apple right now. -
I cannot share photos via my hotmail account but works with Gmail
Can anyone help?
I have been using my hotmail account to send/share photos on iPhoto. Recently I cannot share photos via my hotmail account but works with Gmail?
What do I need to do to get the hotmail account working again?In iphoto I select the photos to send, click on share and email. I setup the email in iphoto and iphoto sorted out all the pop3 & SMTP settings all i had to do was put my email & password in. Since its gone wrong I have got an ipad but no changes to my email settings.
I have been looking at the 'mail' which is also setup for hotmail and I can't send emails from there either so i don't think there is a problem with iphoto. -
Time Capsule in Yosemite can be used for router/internet but Mac cannot locate for backups.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Maybe you are looking for
-
I shut off my computer and the next day replaced the batteries in my keyboard after getting the low battery message. After replacing them and turning the keyboard on and off the green LED was blinking which meant it was in discovery mode. The problem
-
CALL function to extract data from a structure table
Hi Gurus, Anyone knows how to write a call function to extract data from a structure table? Your help is very much appreciated. Thanks alot.
-
Nikon RAW NEF files have white balance blown out (iPhoto 7.1.4)
I had no problems opening my Nikon D200 RAW NEF files in iPhoto until about a month ago. I think I downloaded a patch for compatibility of camera files? After that when ever I open A raw file, the colors and white balance are blown out.
-
Itunes search pop-up not selectable by mouse. (clicking selects objects in main window).
When making a search, the window pop-up can not be selected by the mouse. It stays there, but any click results in selecting the main window (for example the normal song list). Even when just highlighting the mouse over the pop-up you can see the act
-
Hi Team, we are developing apps for share point 2013 which is provider hosted. In web application we have start page where we are using jquery document.ready function and updating label value which works fine if i browse the web app separately. when