Cannot locate 'upgrade catalog' tab in LR4.2 file pulldown

I'm trying to bring PSE8 catalogs in to LR4.2 but I do not see the 'upgrade catalog' command in the file pulldown as shown in the LR4 tutorials.
Thanks in advance, Chris

did you try to import the images directly from disk? Does PSE actually have a catalogue?

Similar Messages

Cannot Locate "Digital Input" tabbed p

I have the original SB Audigy on my system (both the card and software). I am trying to enable SPDIF, so I went to the SB Audigy user guide and was instructed to go to "the Digital Input tabbed page, click the SPDIF box and select from the list." I looked all over the place and could not find the "Digital Input" tab that the help file speaks of. That same section of help states that "This feature is available only if you are using the Optical Digital I/O card or the SB Audigy Dri've". Sure enough, I do have the SB Audigy Dri've.
Can someone please help me locate this "Digital Input" tabbed page?
Other than that, if you know of a registry setting I can change to turn on SPDIF, that would cover my needs just the same.
Thanks in advance,
Dan

DMR,
Look in Control Panel -> AudioHQ -> Device Control. The setting will be there.
Jason

I am trying to delete multiple photo albums from itunes and cannot locate a delete method on the itunes page. I tried deleting from my iP4 but cannot locate a delete tab other than the one on the camera roll section. Any suggestions would be a help

I am trying to remove photos from itunes so I can resync my ip4 and remove all the photos that were transferred from my Win7 PC when I synced the phone. No tabs on the phone to delete so I assume I will need to delete from itunes and resync the phone.
Any help would be greatly appreciated.
JM

I believe you just are able to delete them from iTunes.
Hope it will be helpful

I cannot locate the navigation tab in the insert panel.

Part 2 of the turtorial instructs to " cick on Navigation in the insert panel" I don't see it there.

In the App Store click on Mountain Lion.
Where it says $19.99 click on that and the button will turn to Buy.

HT1925 cannot install upgrade because old Bonjour components cannot be removed Bonjour.msi not found

Cannot install upgrade of Itunes due Bonjour old files cannot be removed nor Bonjour.msi not fuond on PC

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error message while importing upgraded LR3 catalog to new LR4 catalog

I'm using a Win7 x64 system, 3Ghz Xeon dual core, 8 GB ram system. After upgrading a LR3 catalog to LR4, it would not display all images in GRID VIEW in the upper level folders. i.e. D:/Photos/2011. It will display the images in the 2011 folder but not in the Photos folder. And yes I do have the "Show Photos in SubFolders" selected.
By importing this updated LR4 catalog to a new LR4 catalog the display problem disappears. However, I get an error message at the end of the import saying that "Lightroom could not import this catalog because of an unknown error." This occurs after it says it is importing updated keywords. But, as compared to the LR3 catalog, the new LR4 catalog shows the correct number of images in the catalog, shows the correct number of collections and seems to have all the keywords in the keyword list panel.
Because there seems to be some sort of catalog database upgrade error, I am hesitant to use LR4 for production at this time. Does anyone have any suggestions as to what this error might be, or a work around for the error so I can be confident in my LR4 catalog?
Thanks,
Tony...

I've pgraded to LR4.1 RC1 and then created a new catalog, imported from my original LR3 cat. It updated that temporary cat and then imported to the new LR4 cat without issues or error messages. I then just did an upgrade to my original LR3 cat and saved it in another location. Upgrade went without hitch or error messages and I am now using that catalog. So far, so good with the new candidate.
Tony...

Problems after upgrading catalog from LR4 to LR5

After upgrading a LR 4 catalog to LR5, I moved some files around between sub folders. I then went to sync up the parent folder. The dialog box said that I would be importing 12,000 photos and deleting 12,000 missing photos. My folder structure for a ctalog is a parent folder named for the year and the sub folders with the date and shoot description. I was synchronizing the parent (year) folder. When it finished, the folder structure was correct and the photos were in their new(correct) folders. However, all of my LR4 adjustments that had been made in LR4 were gone. There was no history either. It was like I was importing for the first time.
I upgraded the original catalog again and the photos were in the original locations just like the first time I upgraded. I tried to sync an individual folder and it imported 50 new files and deleted 50 missing files. Again the LR adjustments were gone. Any suggestions on how to sync an upgraded catalog without losing my prior version adjustments?
Mac OS X 10.9.2
LR 5.3

Yes, synchronizing is not the tool you should be using in this case, when you move photos from one folder to another. The proper method is to reconnect your photos in Lightroom after you moved them via: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm. But your current catalog has lost its edit information, so this will not help on your current catalog. So ...
I hope you have a backup of the catalog file before you did the synchronization, or otherwise you will have to upgrade your LR4 catalog again. Open one of those and then reconnect as in the link.
As side advice, perhaps you might want to consider using an organizing technique that does NOT require moving phtoos/folders from here to there. You might want to consider using organizing and searching via keywords and captions and other metadata, which does not require moving photos, and does not require re-linking photos, and gives you the ability to place photos in more than one "category" (keyword), rather than with folders where a photo can be in at most one "category" (folder)

LR5 upgraded catalog is only giving LR4 Develop module options - help!

After a successful upgrade to LR5 from LR4 on an old catalog I'm encountering an unusual situation:
when I use the Develop module the palette options are not LR5.
Instead of Shadows, for example, my LR5 catalog is showing Recover and Fill Light from LR4.
I'm working on a MacPro tower and the catalog in question is on an external hard drive.
I've checked the upgrade status and it is definitely a LR5 upgraded catalog.
I've upgraded many catalogs over the years from LR1 to now and this is the first time I've
seen this issue.
Any suggestions appreciated.

You are working with images that were processed with an older version of Lightroom and process 2010. Lightroom honors those previous adjustments and retains the 2010 process. To change to the new 2012 process go to the calibration tab in the develop module and make the appropriate choice.

Cannot locate wireless Airport hubs in Airfoil after upgrading modem and router?

Cannot locate wireless Airport hubs in Airfoil after upgrading modem and router? Just replaced modem and router-Airport is working for internet connection, but I cannot locate the two additional sites in my home to feed music to. Each is connected with a Apple wireless hub. Thanks

To work in this configuration, you just need to setup the AX as a bridge.
To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new setting.

I am trying to install the cs5 upgrade on my new laptop, however, I cannot locate my cs4 program to install first. Am I out of luck?

I am trying to install the cs5 upgrade on my new laptop, however, I cannot locate my cs4 program to install first. Am I out of luck?

You do not need the older version installed in order to install the upgrade version, but you do need the serial number from CS4 to prove that you qualify for using CS5. During the activation process for CS5, after you successfully enter the CS5 serial number you will be asked to select the qualifying version (CS4) from a list and to enter its serial number.
If you registered CS4 when you originally installed it then you might be able to find the serial number available in your Adobe account online in the Products section.
Find your serial number quickly

I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

EdWeidman by default the download will be saved to your Download folder. I do not know the exact name of the file which was provided to you.

I cannot locate my original SN from Aperature 2. I have the Aperature 3 upgrade SN but that is not acceptable. How doI gain access?

I cannot locate my original SN fron Aperature 2. I have the Aperature 3 upgrade SN but that apparently is not acceptable. Help!

Contact Apple and ask for a "Replacement Serial Number".
You will need to provide a proof of purchase:
See this page: Pro Application Replacement Serial Numbers

Lightroom cannot open the catalog named "lightroom 4 good" located on volume "LIGHTROOM" because Lig

Lightroom cannot open the catalog named “lightroom 4 good” located on volume “LIGHTROOM” because Lightroom cannot save changes to this location. This is what I am receiving even from my back-up
Serial Number removed by: PECourtejoie

You need to have writing permission where a LR catalog is stored.
Even for just opening a catalog, since this database does not have a save-to-catalog command.
Maybe it makes sense that you do not have them for a backup storage location in order to prevent accidental overwriting?
If you agree, first copy the lrcat-file to your usual working folder where you have writing permission, maybe renaming it if that would overwrite you real working catalog.
If you do not agree, remedy the writing permission for your user account at the backup spot.
Cornelia

Purchased upgrade Snow Leopard from Apple and installed, now it says cannot locate my scanner?

Have iMac with OS X version 10.6.3 2.4 GHz Intel Core 2 Duo with 2GB 800 MHz DDRw SDRAM. Purchased Mac OSX Snow Leopard and installed the upgrade.
Connected to HP Photosmart C4680. All worked fine until installing Snow Leopard. Now my C4680 will not scan, says it cannot locate the scanner. Reinstalled Snow Leopard with the same results. I tried another Printer, Scanner with the same results. I set both scanners up from the get go but still get the same results. I think S.L left something out. Would appreciate any help.

Unless there are drivers provided by Apple to work with the printer, you're out of luck. The latest drivers provided by Lexmark are for OS X 10.4 Intel. Unfortunately, this can happen when slightly older peripherals and newer software don't mesh.

I have an iPod 5th gen. My audiobook playlists disappeared. They show as "on this device" in iTunes, but I cannot locate them on the device. Even the audiobook tab has disappeared. This happed after the most recent iTunes udate.

I have an iPod 5th gen. My audiobook playlists disappeared. They show as "on this device" in iTunes, but I cannot locate them on the device. Even the audiobook tab has disappeared. This happed after the most recent iTunes update.

- Delete all AB and resync
To delete all music go to Settings>General>Usage>Storage>Manage Storage>Audio Book (if present) and delete
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Cannot locate 'upgrade catalog' tab in LR4.2 file pulldown

Similar Messages

Maybe you are looking for