Cannot log in after migration from 3.4 to 4.0

Moving from LSES11/Vibe3.4 to SLES12/Vibe4.0..
After struggling with JCE files and Encryption things i finally get catalina.out and appserver.log errorfree...
up to the moment when i want to log in..
i use the login mask in any browser and get the following stack into the appserver.log.
It seems like it doesn´t know which method to use or it has some old stuff in any config file.
Does anybody have a clue what´s on here?
2015-04-15 21:31:05,419 ERROR [http-bio-8443-exec-1] [com.novell.teaming.module.authentication.impl.Plus AuthenticationProviderModule] - Unable to configure authentication for zone 1
org.jasypt.exceptions.EncryptionOperationNotPossib leException
at org.jasypt.encryption.pbe.StandardPBEByteEncryptor .decrypt(StandardPBEByteEncryptor.java:850)
at org.jasypt.encryption.pbe.StandardPBEStringEncrypt or.decrypt(StandardPBEStringEncryptor.java:679)
at org.kablink.util.encrypt.ExtendedPBEStringEncrypto r.decrypt(ExtendedPBEStringEncryptor.java:113)
at org.kablink.teaming.util.encrypt.HibernateEncrypto r.decrypt(HibernateEncryptor.java:106)
at org.jasypt.hibernate.type.AbstractEncryptedAsStrin gType.nullSafeGet(AbstractEncryptedAsStringType.ja va:141)
at org.hibernate.type.CustomType.nullSafeGet(CustomTy pe.java:109)
at org.hibernate.type.AbstractType.hydrate(AbstractTy pe.java:104)
at org.hibernate.persister.entity.AbstractEntityPersi ster.hydrate(AbstractEntityPersister.java:2265)
at org.hibernate.loader.Loader.loadFromResultSet(Load er.java:1527)
at org.hibernate.loader.Loader.instanceNotYetLoaded(L oader.java:1455)
at org.hibernate.loader.Loader.getRow(Loader.java:135 5)
at org.hibernate.loader.Loader.getRowFromResultSet(Lo ader.java:611)
at org.hibernate.loader.Loader.doQuery(Loader.java:82 9)
at org.hibernate.loader.Loader.doQueryAndInitializeNo nLazyCollections(Loader.java:274)
at org.hibernate.loader.Loader.doList(Loader.java:253 3)
at org.hibernate.loader.Loader.listIgnoreQueryCache(L oader.java:2276)
at org.hibernate.loader.Loader.list(Loader.java:2271)
at org.hibernate.loader.criteria.CriteriaLoader.list( CriteriaLoader.java:119)
at org.hibernate.impl.SessionImpl.list(SessionImpl.ja va:1716)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl. java:347)
at org.kablink.teaming.dao.impl.CoreDaoImpl$52.doInHi bernate(CoreDaoImpl.java:2958)
at org.springframework.orm.hibernate3.HibernateTempla te.doExecute(HibernateTemplate.java:407)
at org.springframework.orm.hibernate3.HibernateTempla te.execute(HibernateTemplate.java:339)
kind regards
Gerd Zobel
The NetWorker GmbH
www.the-networker.de

I seem to have the same problem as Gerd.
Recent 3.4 installation updated to 4.0. My Vibe site is running but can only display content to guest. When you click login and submit credentials, the page displays a tomcat 500 error and no more vibe content.
appserver.log repeatedly shows errors in the LDAP user sync process and Gert's exact line:
2015-04-20 18:03:44,578 ERROR [http-bio-8443-exec-5] [com.novell.teaming.module.authentication.impl.Plus AuthenticationProviderModule] - Unable to configure authentication for zone 1: org.jasypt.exceptions.EncryptionOperationNotPossib leException
my installation then shows this next error in appserver.log:
2015-04-20 18:03:51,134 ERROR [http-bio-8443-exec-7] [com.novell.teaming.module.authentication.impl.Plus AuthenticationProviderModule] - Unable to rebuild providers for zone 1: org.jasypt.exceptions.EncryptionOperationNotPossib leException
Does anybody know a fix? JCE unlimited policies related maybe???
I'm on sles 11.3 x64 with Oracle JDK 7
Originally Posted by Gertfried Zobel
Moving from LSES11/Vibe3.4 to SLES12/Vibe4.0..
After struggling with JCE files and Encryption things i finally get catalina.out and appserver.log errorfree...
up to the moment when i want to log in..
i use the login mask in any browser and get the following stack into the appserver.log.
It seems like it doesn´t know which method to use or it has some old stuff in any config file.
Does anybody have a clue what´s on here?
2015-04-15 21:31:05,419 ERROR [http-bio-8443-exec-1] [com.novell.teaming.module.authentication.impl.Plus AuthenticationProviderModule] - Unable to configure authentication for zone 1
org.jasypt.exceptions.EncryptionOperationNotPossib leException
at org.jasypt.encryption.pbe.StandardPBEByteEncryptor .decrypt(StandardPBEByteEncryptor.java:850)
at org.jasypt.encryption.pbe.StandardPBEStringEncrypt or.decrypt(StandardPBEStringEncryptor.java:679)
at org.kablink.util.encrypt.ExtendedPBEStringEncrypto r.decrypt(ExtendedPBEStringEncryptor.java:113)
at org.kablink.teaming.util.encrypt.HibernateEncrypto r.decrypt(HibernateEncryptor.java:106)
at org.jasypt.hibernate.type.AbstractEncryptedAsStrin gType.nullSafeGet(AbstractEncryptedAsStringType.ja va:141)
at org.hibernate.type.CustomType.nullSafeGet(CustomTy pe.java:109)
at org.hibernate.type.AbstractType.hydrate(AbstractTy pe.java:104)
at org.hibernate.persister.entity.AbstractEntityPersi ster.hydrate(AbstractEntityPersister.java:2265)
at org.hibernate.loader.Loader.loadFromResultSet(Load er.java:1527)
at org.hibernate.loader.Loader.instanceNotYetLoaded(L oader.java:1455)
at org.hibernate.loader.Loader.getRow(Loader.java:135 5)
at org.hibernate.loader.Loader.getRowFromResultSet(Lo ader.java:611)
at org.hibernate.loader.Loader.doQuery(Loader.java:82 9)
at org.hibernate.loader.Loader.doQueryAndInitializeNo nLazyCollections(Loader.java:274)
at org.hibernate.loader.Loader.doList(Loader.java:253 3)
at org.hibernate.loader.Loader.listIgnoreQueryCache(L oader.java:2276)
at org.hibernate.loader.Loader.list(Loader.java:2271)
at org.hibernate.loader.criteria.CriteriaLoader.list( CriteriaLoader.java:119)
at org.hibernate.impl.SessionImpl.list(SessionImpl.ja va:1716)
at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl. java:347)
at org.kablink.teaming.dao.impl.CoreDaoImpl$52.doInHi bernate(CoreDaoImpl.java:2958)
at org.springframework.orm.hibernate3.HibernateTempla te.doExecute(HibernateTemplate.java:407)
at org.springframework.orm.hibernate3.HibernateTempla te.execute(HibernateTemplate.java:339)
kind regards
Gerd Zobel
The NetWorker GmbH
www.the-networker.de

Similar Messages

POST MIGRATION - Project Site cannot be found after migration from 2007 to 2010

Hi,
I have done full migration from Project Server 2007 to Project server 2010. All the databases have been restored. The details in the Project Center are coming correctly. But When I open the Project Site , I get error webpage cannot be
found.
I have done the Bulk update but it is not updating the URL to 2010 URL.
Please help.
Regards

Use PowerShell to list all the sites in your PWA site collection.
There are many examples online.. Here is a link that is useful
http://blogs.msdn.com/b/vijay/archive/2009/10/01/how-to-list-all-the-sub-sites-and-the-site-collections-within-a-sharepoint-web-application-using-windows-powershell.aspx
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

New User cannot access OWA after migrate from Exchange 2007 to Exchange 2013

Dear all,
I recently migrate the Exchange server from Exchange 2007 on Windows Server 2003 to Exchange 2013 on Windows 2012 R2. I can open the mailbox moved from Exchange 2007 without any problem. However when I created a new user in Exchange 2013, the user cannot
login the OWA, the browser will throw out following screen. Can anyone help me in this case. Thanks a lot!

Hi Winnie,
Thank for your reply. Below is the result, please note there has four exchange servers, HKAD and HKEX are the existing Exchange 2007 server. HKCAS1 and HKCAS2 are the new Exchange Server 2013 - both of xchange server 2013 are using owa.ksi.com.hk
as the external URL.
Identity                      : HKAD\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkad.ksi.com.hk/owa
ExternalUrl                   :
Identity                      : HKAD\Exchange (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKAD\Public (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKAD\Exchweb (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKAD\Exadmin (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkex.ksi.com.hk/owa
ExternalUrl                   :
Identity                      : HKEX\Exchange (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\Exadmin (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\Public (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKEX\Exchweb (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : False
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           :
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
ExternalUrl                   :
Identity                      : HKCAS2\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkcas2.ksi.com.hk/owa
ExternalUrl                   :
https://owa.ksi.com.hk/owa
Identity                      : HKCAS1\owa (Default Web Site)
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication           : True
WindowsAuthentication         : False
DigestAuthentication          : False
FormsAuthentication           : True
LiveIdAuthentication          : False
AdfsAuthentication            : False
OAuthAuthentication           : False
ExternalAuthenticationMethods : {Fba}
Url                           : {}
SetPhotoURL                   :
Exchange2003Url               :
FailbackUrl                   :
InternalUrl                   :
https://hkcas1.ksi.com.hk/owa
ExternalUrl                   :
https://owa.ksi.com.hk/owa

ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2

Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank You

Originally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above.

After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed

Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambar

Hi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion

Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Testing of SAP BW system after migration from OS Unix to windows

Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
Neeraj

Hi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation     PHASE 1
Review New Functionality     Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade     Install GUI's for Upgrade Test persons
"Check Prerequisites     -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems     APO
ECC6.0"
Check Compatibility Reqs with 3rd party software     ?
"Test Team 2004s Delta Training     To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes     e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded     Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint     PHASE 2
Check/CleanUp Development Objects     Check all open and not-released developments for release prior to upgrade
Prepare System Setup     Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects     Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested     Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data)     BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains     Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization     PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains     Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset     Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload     Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing     Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing     Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand     apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab)     Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production     Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production     Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security     Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration     Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM

Problem with Java Native Type after Migration from 7.0 to 7.1

Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
Peter

Hi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g

Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,

Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Cant find my iTunes library after migration from old PC to new Mac

Can't find my iTunes library after migration from old PC to new Mac?

Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer.

Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2

Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
Thanks,
Mark

Hi Mark,
Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

STP playback is erratic after migrating from 10.4.11 to 10.5.8

After migrating from 10.4.11 to 10.5.8
SoundTrack Pro playback is erratic,
i.e; audio stops and starts with a few small click noises.
Your suggestions will be mostly appreciated.

Thanks for your reply.
STP version 2.0.2
Audio is straight out no interface and works fine besides erratic stop-start playback.

Cannot log in after migration from 3.4 to 4.0

Similar Messages

Maybe you are looking for