Cannot log in to Facebook using the phone's browse...
I cant log in nokia311 in my fb internet pls tell me wat can i do
Moderator's note: Post has been edited. More appropriate title was provided.
Hi Tinetinr
What type of connection are you using? Is it WiFi or data? Are you getting any error message when trying to log in? Just to isolate the issue, you can try to go to the Internet > on the upper left hand corner, tap on the three (3) lines > Settings > Clear cookies. If that doesn't help, consider clearing personal data as well. Go to the Internet > on the upper left hand corner, tap on the three (3) lines > Settings > Clear all personal data. Once done, try to log back in to Facebook.
Hoping that it'll resolve the issue.
Cheers!
Similar Messages
-
I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.
reading through that, it doesn't look like you were given up on Candice. you never replied to StarDeb's last set of questions in that thread. she was probably waiting to hear back from you.
why didn't you reply? -
I cannot multi task while talking on the phone. eg. connect to facebook, itune, whatassp..
Recently I cannot multi task while talking on the phone. eg. connect to facebook, itune, whatassp. I can do multi task last time. pls help !
If your carrier is CDMA (such as verizon in the USA) you won't be able to talk on the phone and use data/internet stuff at the same time. It's a limitation of the technology... Not sure if that helps or not. What carrier are you with?
-
I have bought an used Iphone 5. I dont have the password for the existing login id of the old owner. How do i use the phone and change the log in id?
Unfortunatly the only way that you can get it off is to get the old user to input the password. You may need to contact that old user and see if he can put the old password in. hope this helps.
-
Just installed IOS 8 to iphone 5 and cannot connect to WI FI. Sometimes connects and when I begin to use the phone ot drops out.
I have attempted all the regular trouble shoots such as resets, complete restore and reinstallation of ios 8. no change.I don't have an answer for you but from my experience iOS WiFi syncing has always been a hit and miss affair (more miss than hit I'm afraid). I have gotten to the stage where I rarely use the WiFi sync. It is just quicker, easier and much less stressful to use the USB cable. I am having the same issues with all the iOS devices in our family which includes various models of iPhone, iPad and an iPod Touch and have been having them since WiFi syncing was introduced (in iOS5 ???). And then I have not even mentioned my favorite iTunes syncing messages: "Waiting for items to copy" and "Waiting for changes to be applied"!
iTunes is always extremely quick and eager to pick up the devices but as soon as I click on sync it shows "Looking for iDevice" and then the device disappears. I have found that initiating the sync from the Settings app on the device prevents this issue.
It does however seem as if it is worse with Windows 7. I did not have so many issues with my previous Windows Vista PC.
Sorry I cannot be of any help. -
I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?
I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.
-
i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?
First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier. -
Help iPhone4 only headphone set working cannot use the phone
Help iPhone4 only headphone set is working I cannot use the phone in a normal way, voice control keep coming up
The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network. -
the new 8.2 update has left me with a red itunes logo and a charger end on the screen, i cannot use the phone at all, please help
Your phone is in recovery mode; connect it to a computer and use iTunes to restore it.
~Lyssa -
I have completely forgotten my passcode and have find my iphone enabled. When I try to restore I get the message disable find my iphone. I cannot do this as my phone is disabled.I logged onto icloud and removed the phone (can be done only when its offline) but the phone keeps appearing.
Do this:
Plug in your iPhone into your computer.
Hold the power button and home button for 10 seconds the both with each other.
Then release the power button but keep holding the home button for another 15 seconds.
This'll put it onto DFU mode so that you can restore it. Good luck! -
I attempted to update my iphone 3 using itunes. I'm not certain but I believe I did a backup on my pc first. I am now unable to use the phone at all - the slide bar won't move and I have a camera icon next to the slide bar which is not responsive. I have tried to sync and even left the phone connected to the pc overnight. The phone is going flat within a couple of hours and won't stop beeping every few seconds and seems to be syncing all the time, even when disconnected from pc. I am fearful that I have lost all my contacts - nothing is working - can anyone help - please?
Try resetting it if you can: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. If you can't, try to connect it to iTunes, go to the Summary tab of your sync settings and click Restore to restore it. If that doesn't work you'll have to force it into recovery mode to restore it as outlined here: http://support.apple.com/kb/ht1808.
You can check in iTune to see if you have a backup. They are listed in iTunes>Preferences>Devices. However, the backup may not bring your contacts back as contacts are only backed up as necessary to preserve the recent call and call favorites lists. -
On my iphone 4S, the images are all magnified and I am unable to zoom the images out and use the phone. Any suggestion to prevent this from happening and correcting this?
Double tap on the screen using three fingers to get back to normal.
Turn on/off accessibility features using iPhone: Go to Settings > General > Accessibility.
Zoom in or out
Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPhone automatically returns to that magnification when you zoom in by double-tapping with three fingers.
Message was edited by: Ingo2711 -
When using the phone, I must use the speakerphone in order to hear. Does this require a visit to the Apple store or will a reset or restore possibly fix?
Try this before calling Apple or going to the store.
Open iTunes, and restore the device as NEW. Then test making some calls, if it works, GREAT if not then call AppleCare or an Apple store for an appointment.
Based on experience a restore fixes this issue 99.9% of the time. The .1% is hardware issue based the rest is software based issue -
I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
I have had creative suite premium installed on my computer for a long time, but now it states that my computers configuration has changed and needs to be reactivated, but it cannot be activated by internet, and the phone number states that adobe no longer activates by phone. What is the solution to continue to use my program that I have had working on this computer for a long time?
You do not state which version... if CS2 read next
CS2 (and earlier) Activation Server replacement software
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
When you install the special version of PPro2 on a Win7 or Win8 computer, you MAY need to right click the program icon and select WinXP compatibility from the option popup... AND Vista problems https://forums.adobe.com/thread/416347
If not CS2, read next
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Maybe you are looking for
-
Master-Detail Problem SESSION & REQUEST
I'd really appreciate some help with this: I got a very simple master detail application, with a data table in the master page that gets it's data from a spring-hibernate bean, pretty straightforward. My business requirement indicates that at first t
-
How to use loop inside mx:webservice tag
Hi to all, I'm using some webservices. i just want to pass XMLChildren to the request element of webservice tag. for that, <mx:WebService id="WES3" destination="applicantws" useProxy="true" fault="Alert.show(event.fault.faultString) , 'Error'" > <mx:
-
Hello All. I have a datagrid that pulls all its data from a database. It has two colums - String and Visibile. I would like to create a function, that acts as a "Where" statement. Its function should look at the datagrid and set the value of a label
-
Messages go blank once they are in the sent folder
Hi, I have had a few messages in my sent box (not all) just come up blank when I got to look at them later.. My name, the person I sent it to are there, but no attatchements, not text I typed in etc... Any ideas on how to fix?
-
Error when searching for entries in secure store
Hi All, I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store". Details of the Error is showing