Cannot log into DTR with Active Directory User

Greetings,
I have set up and installed JDI correctly. I can log into /devinf, the cbs, cms and sld systems with no problem using both Administrator and my JDI.Administrator that I assigned to an Active Directory user. I can log into the DTR using a user from the database (i.e. Administrator), however, when trying to access the DTR with an Active Directory user, I get the following message:
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during the request procession.
Details: Error [javax.servlet.ServletException: Group found, but unique name "businessUnit.all.guests" is not unique!], with root cause [com.tssap.dtr.server.deltav.InternalServerException: Group found, but unique name "businessUnit.all.guests" is not unique!]. The ID of this error is
Exception id: [0012798F81680042000000090000165C0003FE9AA3C0B86B].
This group exists in multiple domainshowever, this has not caused us any issues to date with our portal and other pieces of SAP WASit's only this DTR error.
Any help is greatly appreciated.
Thanks,
Marty

Hi Marty,
In the document available at the link enclosed below, there is a part that explains how to configure DTR so that it always uses "Unique-IDs".
http://help.sap.com/saphelp_nw04/helpdata/en/20/f4a94076b63713e10000000a155106/frameset.htm
It is mentioned that this is valid for LDAP, but the information is applicable for Active Directory as well.
Regards,
Manohar

Similar Messages

Issue with Active Directory User Target Recon

Hi ,
I am facing an issue with Active Directory User Target Recon
My environment is OIM 11g R2 with BP03 patch applied
AD Connector is activedirectory-11.1.1.5 with bundle patch 14190610 applied
In my Target there are around 28000 users out of which 14000 have AD account (includes Provisioned,Revoked,Disabled accounts)
When i am running Active Directory User Target Recon i am not putting any filter cleared the batch start and batch size parameters and ran the recon job .Job ran successfully but it stopped after processing around 3000 users only.
Retried the job two three times but every time it is stopping after processing some users but not processing all the users.
Checked the log file oimdiagnostic logs and Connector server logs cannot see any errors in it.
Checked the user profile of users processed can see AD account provisioned for users
My query is why this job is not processing allthe users.Please point if i am missing some thing .
thanks in advance

Check the connector server load when you are running the recon. Last time I checked the connector, the way it was written is that it loads all the users from AD into the connector server memory and then sends them to OIM. So if the number was huge, then the connector server errored out and did not send data to OIM. We then did recon based on OUs to load/link all the users into OIM. Check the connector server system logs and check for memory usage etc.
-Bikash

Tighter Integration with Active Directory User Groups

I just wrapped up a Jabber deployment with IM&P 9.1(1) and J4W clients 9.1(3).
The customer asked me if it is on Cisco's roadmap to allow groups in Active Directory to be pulled into the Jabber client. The primary business case is to allow those in IT to send out IM blasts to the corporation or certain departments.
Obviously, this would require a significant amount of development and a much tighter integration with Active Directory, but I need to ask anyway.
Has something like this been identified and placed on any roadmap?
Thanks,
Matthew Berry

Unfortunately this kind of questions cannot be addressed here, roadmap questions need to go thru official channels for an answer.
You need to reach your SE/AM for this question.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Unable to login @ login window with Active Directory User

I successfully bound my test machine to Active Directory and can search using dscl and id. I can also su to my active directory user account an authenticate perfectly. All search bases are correct and everything else looks fine.
When I attempt to login from the login window as an AD user, the window shakes. Clicking under Mac OS X shows that "Network Accounts Available". Looks like the CLI tool "dirt" is now gone as well, although insecure it would possibly show something here.
Anyone else having issues after binding to AD? I bound using the Directory Utility gui... I have not tried using my leopard bind script yet.
Thanks,
Ken

I have pretty well the same problem. The machine was already bound to AD prior to upgrade. After could not login on with my account (jball). Can log on with other accounts from the same domain (we only have one AD domain). Can also su to jball in a terminal session. Can't access network resources with jball when I try to connect to a windows server through the finder, instantly comes up with bad username or password, doesn't even think about it.
I have removed any copies of the home folder under either /Users or /Domain as I have had problems with that before. Have repaired permissions and unbind and bind the machine to AD. Have been at this all day now and no closer. Get these error messages in console:
31/08/09 4:49:27 PM SecurityAgent[666] Could not get the user record for 'jball@domainname' from Directory Services
31/08/09 4:49:27 PM SecurityAgent[666] User info context values set for jball@domainname
31/08/09 4:49:27 PM SecurityAgent[666] unknown-user (jball@domainname) login attempt PASSED for auditing

I cannot log into messages with my aol/aim account

Hi,
When I try to log into messages with my aol/aim account, it keeps on saying that the username and/or password is incorrect. Neither are incorrect as I can log into the account on the aim web settings page and on the aol page.
Any help?
Thanks

If you change your passord on AOL, for security they block your new password on your iPad but not on your PC. I downloaded the AOL application on my iPad and then used that to change my password on AOL and then my Mail on my iPad fully works. I then used my AOL new password on my PC and now everything works.

Unable to access server files shares with Active Directory Users

Quick breakdown of my issue.
I have setup a Yosemite file server running the latest version of Yosemite and Server.
File sharing in Server.app is enabled and shares have been created
The server is bound to my company's Active Directory and you can directly login to the computer via AD credentials.
The big issue is this, unless the user has directly walked up to my server and logged into it at least once, they cannot authenticate to the file shares via their AD credentials.
For example: Administrator (me) I can login and access all file shares without issue.
Jane Smith (SMITH) who has actually walked up to my server and logged in via her AD credentials, can also access all file shares. (That she has access to)
John Doe (JDOE) who has not logged into the server in anyway, cannot authenticate to the server file shares at all (even though I have granted him permission) He just gets an "Access Denied" message.
I have gone into Directory Utility and changed the search order to give AD priority and this still doesn't resolve the problem.
We have unbound the server from AD and added in back again and still not able to resolve.
If you open Server.app and go to add someone from AD to a file share, it finds the AD user quickly and everything looks right. but still unable to authenticate to the server if they haven't directly logged into it before?
All of the documentation and google articles I have found say my server is setup correctly, any help would be greatly appreciate it!
Thanks in advance!

I figured this out. In Mountain Lion Server, it doesn't matter if you give the user rights to a shared file or folder, if the user doesn't have access the File Sharing service, they can't get it. I had to find the specific users in the Server app under the AD in the Users tab, and give them rights to the File Sharing service. I think you can do this for a whole AD group as well, but I haven't tried.

Problems with Active Directory Users showing as not found in Open Directory work group manager

I’m running a golden triangle setup with Open directory assigning group policy and authentication provide by active directory. In workgroup manager I can search through the AD and add users or computers to groups in OD workgroup manager. However when I save and refresh the users or computer appear as ‘not found’. Is there a reason for this?

Hi Zero
It's very reassuring to know im not the only one having issues with this..
Im on my second re install of the server.. I like you have no wish to do another clean install as everything else is connected and it seems like the answer is probably very simple.
So today im going to re- run the terminal commands as layed out in the online guides.
However i was kinda hoping someone would be able to supply us with an answer.
thanks
J

Wireless Deployment with Active Directory User Group Integration

I am trying to find out the best practice in deploying a WLAN for users in the cooperate environment, which uses their company active directory integrated laptops to join to the WLAN.
I know this can be done using certificates easily but I want to just find a way to deploy this without certificates and only based on the AD user group. Maybe a Radius server + LDAP server integration solution would be great.
Please advice. Thanks.
Cheers
Lal Antony
www.lalantony.com

The easiest way to deply this is with a Microsoft toolkit, it has everything you need included, manuals, scripts to install and configure server-side components and it's very easy to use. You can get it from here:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=60c5d0a1-9820-480e-aa38-63485eca8b9b&displaylang=en
It's based on Win2003 server but I've been advised by MS that it should be OK on Win2008 as well.

I cannot log into icloud with Windows 7 64 bit system.

It was working for about two months without a problem and then it ceased working about 2 months ago. I just get an ongoing circle as if it is trying to log me in, but no luck. I can log in on icloud website however.

Curt, since I purchased a new laptop, I had to deactivate CS4 on my old laptop, uninstall, and install CS4 on my new laptop with my disks and activate. That all went fine, but I can not update the software. CS4 needs to be updated when installed from the original disk, as there are important bugs and resolved issues with the software that are available with the updates that are released after the original disk.
By "not work", I mean that I am not able to update the software at all so that I may work in the latest version of the CS4 software without issues.
JJMack, thank you for your suggestion, however, I am not able to manually install the updates either. All updates fail.
Overfocused, thank you for your suggestion, I will be looking into that, as well as a bunch of other Windows 7 possibles. It may be what you suggested, or it may be a Windows 7 related utility issue or another program with a conflict with Adobe updates in Windows 7 etc.
I remember a couple of years ago when I got the Vista OS laptop, I spent a couple of weeks to research a major bug that eventually was resolved, it was an Office/Adobe incompatibility issue with infopath running Vista.
I hope that I am able to solve the issue soon, it has been a week so far with no resolve. If or when I find a fix to this issue, I will post it here.
Thank you all for your help and suggestions, I really appreciate it.
All the best,
Aaron

Travelling in Mauritania, cannot log into icloud with my PC netbook. I can read my mail on my iphone, but I get a message that "icould is not available" when I try to open it on the PC. It's very annoying as it's not so easy to type on iphone!

Very strange. I have a PC netbook that I use when I travel, and here in Mauritania, when I try to log on icloud to check my mail, it tells me that it is not available or the server is down - the internet is working for everything else. I can read my mail on my iphone, connected to the same network. Is there some reason ou can't open icloud on an iphone and a pc at the same time?

Been looking for similar posts, surprised I haven't found more, because I'm fairly certain that there is a current problem with some parts of Apple's server network: I have 3 iCloud accounts in Mail on my Macbook, and 1 of them (annoyingly, my main one) has not been able to connect for an hour or two. And both of the others wouldn't connect for a few minutes, but are now working again.
More suprising is that trying to log in to webmail (www.icloud.com) is giving a very unhelpful error message, suggesting the server is down. Everything else Internet is working fine for me, and haven't changed any settings, so fairly sure problem is Apple's end.
It's possible that your iPhone is collecting your mail via a different server route that is still working; my three iCloud accounts are collecting via p02.imap.mail.me.com, p09.imap.mail.me.com and p99.imap.mail.me.com, and it's only p02 that's consistantly not working.

After itunes update, cannot log into store with apple id

I have logged out of my apple id and verified that I have the right password. When I log back into Itunes store from my macbook pro, it tells me I need to verify my billing info and asks for my apple id and password again. I enter it and it just circles around and asks for my username and password again. Its just a loop. What do I need to do?

Hi Neil,
Thank you for the quick response, do you work at Apple? Is there a way for one to confirm when a problem like this is related to a down system at Apple in the future, other than posting on the forums?
Thanks again.

Created a child ID and now cannot log into iTunes with it or download apps

I created a new ID for my child (annoying in of itself--can't convert IDs? come on!) and I was refreshing his applications, and mid-download the password stopped working. Received a "Could Not Sign In: An unknown error has occurred" message. I can sign in with this ID at Apple Support but not in the iTunes or App Store. Tried signing out of iTunes in iOS Settings and back in with the child ID and am receiving the same error message. Problem on Apple's end?

Just resolved himself. Maybe a server problem...

Active Directory Users and Computer not displaying column data?

I am running Windows 8.1 Enterprise with RSAT installed. My Domain controllers are Server 2008 R2.
I am having and issue with Active Directory Users and Computers. Typically I will turn on Advanced Features and then add Columns for Email address and Display Name. This for example allows me to easily export lists of users and there email
addresses among other things.
The issue is that on my Windows 8.1 client, the columns for Email and Display Name are empty. It simply will not display this information. It only displays Name, TYpe and Description.
If I use a Windows 7 client, the information displays correctly.
Has anyone run into this issue or heard of this problem when using ADUC on Windows 8.1?

ADUC is an AD tool that is no longer being improved, with Microsoft now focusing on ADAC (Administrative Center). In 8.1, it has improved quite a bit since 7. You can also just try using the
ActiveDirectory PowerShell Module, which is easy to use and fairly powerful. It can be simple to export lists, and the module for AD is included with RSAT tools.
Example:
Import-Module ActiveDirectory
Get-ADUser -Filter {Manager -eq "John.Smith"} -Properties DisplayName,Mail | Export-Csv dump.csv -NoTypeInformation
So, recommendation: either use ADAC, or PowerShell -- ADUC is part of the wave of deprecation.

Can not open Active Directory Users and Computers

Problem Reported:
Out of the blue this has started happening:
When I go to "Active Directory Users and Computers" I get this message.
"MMC cannot open the file C:\WINDOWS\system32\dsa.msc.
This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.
Additional information:
This is a server that has been in use for 2+ years with active directory users that can and do login everyday.
As far as I know the system has no backup.
dsa.msc IS located in the system32 folder
I am using the administrator account.
OS:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Please help with detail. Thank you.

Have you tried to uninstall ADUC administrative tool and re-install it again? If no, please give a try.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Cannot log into OTN

Hi, I cannot sign onto the OTN site. This is my email address
[email protected]
I've tried to create a new account online but it does not work.

One of my colleagues cannot log into OTN with his username and password that was emailed after using the password finder.
Please contact Lars Karlsson via email [email protected] or phone +46-8-6393569 (Sweden) (otn user-id lasse58).
/per

Cannot log into DTR with Active Directory User

Similar Messages

Maybe you are looking for