Cannot log into OpenDirectory server

I am running OSX Server 2.2 on a Mac Mini with 10.8.5. I have successfully enabled Open Directory and created several users that are set up as Services Only, as they do not need home directories, only file sharing and (hopefully in the future) contacts and single sign-on.
I am able to bind my computer to the OD server using the fully qualified domain name (internal.xxxx.org) and get the green "enabled" dot in the Users page on the Mac.
I turned on "Allow Network Users to Log In" and tried to log in as my network user, and it "shakes" when I enter the username and password, and won't log in. What am I doing wrong? I'm unclear how to log in as a network user from my Mac's sign-in screen. I also tried using the administrator's account, which is an actual user account on the server and that did not log in either. It doesn't seem like the Mac is even attempting to check the server for user information.
Thank you.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be 127.0.0.1 (that is, itself) unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. Follow these instructions to rebuild the Kerberos configuration on the master.
5. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
6. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
7. Reboot the master and the clients.
8. Don't log in to the server with a network user's account.
9. Disable any internal firewalls in use, including third-party "security" software.
10. If you've created any replica servers, delete them.
11. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.

Similar Messages

Cannot log into AD on Mountain Lion. Please help! I got the logs

My company has been experiencing this problem ever since Mountain Lion released.
The problem is, we cannot log into AD on all of our MAC who currently runs Mountain Lion. We, however, can log into AD fine with Lion and Snow Leopard just fine. We only use AD, we don't use Open Directory or have any Apple server.
I have gather some logs using the SSH. Please help me view the logs and let me know what's going on if possible.
Here are the steps that I performed before capture these logs.
I format the hard drive and installed a new OS X 10.8.2 on the hard drive using the Recovery Mode (Hold down option Key while boot).
I created a new computer name call ittest-mac3 in AD and assigned to proper OU. I changed the computer name under System Preferences ==> Sharing to "ittest-mac3".
   3. I bind this Macbook Pro to our Active Directory via xyz.com. The bind was successful. I enabled "Create mobile account at login", "Required confirmation before creating a mobile account", " Force local home directory on start up disk", " Use UNC path from active directory to derive network home location", "Default user shell: /bin/bash/. Network protocol to be used: smb:
After I reboot the Mac client, I was unable to log into it using our regular AD user account (consider all of our employees has regular account).
I created 2 test accounts for Mac on Active Directory, they are "mac test" and "mac test 2".
With "mac test" account, I configured everything the same as our regular account in AD. Which I was not able to log into the Mac client using this account.
With “mac test 2” account, I configured everything the same as our regular account in AD EXCEPT for UNIX Attributes. I was successfully logged into the Mac client using this user account.
So the problem is ... set the Unix Attributes for NIS domain on the AD account prevent everyone of us in our company to log into AD on any client that have Mountain Lion OSX installed.
Here are the logs:
Log1. This logs showed successful when log into AD on a Mountain Lion OSX using an AD account that don't have UNIX attributes setting configure.
login as: administrator
Using keyboard-interactive authentication.
Password:
Last login: Mon Dec 17 08:43:38 2012
ittest-mac3:~ administrator$ sudo su -
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
ittest-mac3:~ root# cd /var/log
ittest-mac3:log root# tail -f system.log
Dec 17 09:02:19 ittest-mac3.local SecurityAgent[650]: *** WARNING: -[NSImage com
positeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Pleas
e use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:02:50 ittest-mac3.local sshd[659]: Accepted keyboard-interactive/pam f
or administrator from 10.10.202.63 port 50738 ssh2
Dec 17 09:02:50 ittest-mac3.local sshd[659]: USER_PROCESS: 665 ttys000
Dec 17 09:04:59 ittest-mac3.local sudo[673]: administrator : TTY=ttys000 ; PWD=/
Users/administrator ; USER=root ; COMMAND=/usr/bin/su -
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_authenticate(): authenticat
ion succeeded
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): The group chec
k succeeded.
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): OpenDirectory
- Membership cache TTL set to 1800.
Dec 17 09:04:59 ittest-mac3.local su[674]: in od_record_check_pwpolicy(): retval
: 0
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): No session
type specified.
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): Going to sw
itch to (root) 0's Background session
Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.override' by client
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] for authorization created by
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.loginwindow.override' by
client '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resource s/parentalcontrolsd' [679] for authorization created by
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: User info context values set for mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got user: mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got ruser: (null)
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got service: authorization
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Context initialised
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_check_pwpolicy(): retval: 0
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_attribute_create_cfstring(): returned 2 attributes for
dsAttrTypeStandard:AuthenticationAuthority
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Establishing credentials
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got user: mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Context initialised
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got euid, egid: 0 0
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done getpwnam()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done setegid() & seteuid()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got cache_name: API:164370296:1
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Environment done: KRB5CCNAME=164370296:1
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Cache closed
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup3
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done seteuid() & setegid()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup4
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in ac_complete(): ac_complete returned: 0 for 164370296
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: Login Window login proceeding
Dec 17 09:07:19 ittest-mac3.local ManagedClient[644]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest2", password]]) == 2100 (Connection failed to the directory server.) [This
error is ignored and is only being flagged for notification]
Dec 17 09:07:20 ittest-mac3 kernel[0]: Sandbox: kcm(681) deny mach-lookup com.apple.networkd
Dec 17 09:07:20 ittest-mac3.local MCXCompositor[690]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at is unavailable. User domains
will be volatile.
Dec 17 09:07:20 ittest-mac3.local UserNotificationCenter[696]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It
should not be used in new applications. Use convertRectToBacking: instead.
Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/CoreServices/ManagedClient.app' [644] for authorization created by '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record from kDSNAttrOriginalHomeDirectory =
<home_dir><url>smb://pros-fsvr2/home/mtest2</url><path>/</path></home_dir>
Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record to   kDSNAttrOriginalHomeDirectory =
<home_dir><url>smb://pros-fsvr2/home/</url><path>mtest2/</path></home_dir>
Dec 17 09:07:25 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:26 --- last message repeated 1 time ---
Dec 17 09:07:26 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.164370296): Throttling respawn: Will start in 4 seconds
Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: Unable to talk to lsboxd
Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: SFL(697): AddNewItemWithProperties_rpc returned 5
Dec 17 09:07:26 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:30 ittest-mac3.local distnoted[721]: # distnote server agent absolute time: 3817.482079135   civil time: Mon Dec 17 09:07:30 2012   pid: 721
uid: 164370296 root: no
Dec 17 09:07:30 ittest-mac3.local distnoted[721]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
Dec 17 09:07:30 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.console' by client
'/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100003,0)
Dec 17 09:07:30 ittest-mac3.local loginwindow[641]: Login Window - Returned from Security Agent
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort,
err: 1102
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: USER_PROCESS: 641 console
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: UserName
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: GroupName
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find:
com.apple.ReportCrash.Self
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: Connection with distnoted server was invalidated
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/System/Library/CoreServices/UserAccountUpdater' [727] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (2,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/launchdadd' [730] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (100002,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Session 100015 created
Dec 17 09:07:31 ittest-mac3.local MRT[731]: MRT finished scan. Malware files were not found.
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/MRT' [731] for authorization created by '/usr/libexec/MRT' [731] (2,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/launchdadd' [730] for authorization created by '/usr/libexec/MRT' [731] (100002,0)
Dec 17 09:07:31 --- last message repeated 1 time ---
Dec 17 09:07:31 ittest-mac3.local blued[68]: kBTXPCUpdateUserPreferences gConsoleUserUID = 164370296
Dec 17 09:07:31 ittest-mac3.local locationd[738]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this
compatiblity mapping behavior in the near future.
Dec 17 09:07:31 ittest-mac3.local locationd[738]: NOTICE,Location icon should now be in state 0
Dec 17 09:07:31 ittest-mac3.local UserEventAgent[725]: cannot find fw daemon port 1102
Dec 17 09:07:34 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.done' by client
'/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100002,0)
Dec 17 09:07:36 ittest-mac3.local CalendarAgent[753]: Could not find Meta Data for persistent Store
Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:07:37 ittest-mac3.local genatsdb[764]: ########## genatsdb Sandboxed. ##########
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSCopyWindowShape: pid (763) passed NULL window
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: could not update menu bar region, 1000
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not
be used in new applications.
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should
not be used in new applications.
Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:07:39 ittest-mac3.local genatsdb[764]: *GENATSDB* FontObjects generated = 392
Dec 17 09:07:53 ittest-mac3 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Dec 17 09:07:53 ittest-mac3 kernel[0]: macx_swapoff SUCCESS
Dec 17 09:07:59 ittest-mac3.local Setup Assistant[751]: INFO: MMAccountMgr_Private: finishedSetup called.
Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
Dec 17 09:07:59 --- last message repeated 4 times ---
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3). Setting up event to tell us when to
try again: 2: No such file or directory
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3) for weird reason: 2
Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
Dec 17 09:07:59 --- last message repeated 4 times ---
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mrt.uiagent[783]): Exited with code: 255
Dec 17 09:07:59 ittest-mac3.local NetworkBrowserAgent[796]: Starting NetworkBrowserAgent
Dec 17 09:07:59 ittest-mac3.local imagent[786]: [Warning] Setting up a new messages database.
Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be
used in new applications. Use convertRectToBacking: instead.
Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be
used in new applications. Use convertRectToBacking: instead.
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=243
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
such process
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
terminate job...
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
kLSNotifyApplicationDeath to notificationID=272
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=260
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
        Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
        UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
        Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
        UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
QGL|MIPMAP, vram 1024 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
QGL|MIPMAP, vram 580 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=243
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
such process
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
terminate job...
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
kLSNotifyApplicationDeath to notificationID=272
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=260
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
        Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
        UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
        Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
        UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
        UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
QGL|MIPMAP, vram 1024 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
QGL|MIPMAP, vram 580 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Log2: This log showed was captured when we logged into a test account that have Unix Attributes configure just like our regular user's account.
^C
ittest-mac3:log root# tail -f system.log
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:41 --- last message repeated 1 time ---
Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: User info context values set for tle
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got user: mtest
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got ruser: (null)
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got service: authorization
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Context initialised
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_check_pwpolicy(): retval: 0
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_attribute_create_cfstring(): returned 2 attributes for
dsAttrTypeStandard:AuthenticationAuthority
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Establishing credentials
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got user: mtest
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Context initialised
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got euid, egid: 0 0
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done getpwnam()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done setegid() & seteuid()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got cache_name: API:2137600189:2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Environment done: KRB5CCNAME=2137600189:2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Cache closed
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup3
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done seteuid() & setegid()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup4
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in ac_complete(): ac_complete returned: 0 for 2137600189
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: Login Window login proceeding
Dec 17 09:10:13 ittest-mac3.local ManagedClient[830]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest", password]]) == 2100 (Connection failed to the directory server.) [This
error is ignored and is only being flagged for notification]
Dec 17 09:10:13 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.4294967295[846]): getpwuid("4294967295") failed
Dec 17 09:10:13 ittest-mac3 com.apple.launch

-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this?

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
to svchost.exe and therefore is protected from being manually restarted.
I noticed the following errors when this occurs:
Log Name: Application
Source: Application Error
Date: 7/23/2013 4:35:26 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.xxx.xxx.net
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x46c
Faulting application start time: 0x01ce877f9476ac07
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
<EventRecordID>158950</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW19XM2.agency.nwie.net</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>46c</Data>
<Data>01ce877f9476ac07</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
</EventData>
</Event>
All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
about 5 months ago a similar error fired on a non-virtual machine:
Log Name: Application
Source: Application Error
Date: 2/27/2013 6:57:58 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: AAW29033
Description:
Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x6c0
Faulting application start time: 0x01ce14e1af313fd9
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
<EventRecordID>286291</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW29033</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe_gpsvc</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>6c0</Data>
<Data>01ce14e1af313fd9</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
</EventData>
</Event>
I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
the Group Policy Client service to stop?

You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
**EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

PeopleTools 8.49 Application Designer cannot log into HRCS 9.0 Database

Folks,
Hello. I am working on Human Resources and Campus Solution 9.0 (HRCS 9.0) Portal. The thing is as below:
I understand HRCS 9.0 requires PeopleTools 8.50 or higher. But I have no choice to use PeopleTools 8.49 for it.
My PeopleSoft Internet Architecture is PeopleTools 8.49, Weblogic 9.2, Tuxedo 9.0 and MS SQL Server 2005.
My Operating System is Windows Server 2003 on the top of VM Player 3.
First time, I installed HRCS 9.0 with PeopleTools 8.49 and set up HRCS 9.0 Database in SQL Server successfully.
Application Designer log into Database HRCS 9.0 successfully with UserId PS and Password PS.
Later, the miserable thing happens to me: I delete HRCS 9.0 Database in SQL Server by an accident !
I set up HRCS 9.0 Database again, but Application Designer cannot log into HRCS 9.0 Database any more.
I create a new Virtual Machine to install entire PIA and PeopleTools 8.49 with Windows Server 2003 and set up HRCS 9.0 Database, but Application Designer still cannot log into HRCS 9.0 Database.
My question is:
How to have PeopleTools 8.49 Application Designer log into HRCS 9.0 Database in SQL Server 2005 as I did it at the first time ?
Thanks in advance.

Hi,
When you look at the readme on Oracle Software Delivery Cloud for PeopleSoft Human Capital Management and Campus Solutions 9.0:
PeopleSoft Human Capital Management and Campus Solutions 9.0 – Revision 5: This part (number V30469-01) has replaced the PeopleSoft Enterprise Human Resources Management System (HRMS) and Campus Solutions 9.0 media (part number B34591-01), the PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0 - Revision 1 media (part number V20635-01) and the PeopleSoft Enterprise Human Resources Management System and Campus Solutions 9.0: Feature Pack – March 2011 media (part number V24852-01). New installations of PeopleSoft Human Capital Management and Campus Solutions 9.0 should use this part. If you have already installed the original HRMS and Campus Solutions 9.0 (part number B34591-01) media, Revision 1 (part number V20635-01) media, or Feature Pack - March 2011 (part number V24852-01) media, you should install the Maintenance Packs or bundles available on My Oracle Support; you should not install this part. The PeopleSoft Human Capital Management and Campus Solutions 9.0 – Revision 5 media includes all maintenance posted through December 27, 2011 (up to PeopleSoft HCM and CS Maintenance Pack 13, PeopleSoft HRMS Bundle #18, PeopleSoft Campus Solutions Bundle #23, PeopleSoft Payroll Tax Update 11-F, and Global Payroll Update 2011-F). If you install this media, you do not need to separately install these maintenance packs or bundles. All installs of HCM and Campus Solutions 9.0 – Revision 5 require PeopleTools 8.52.03 or higher+. Please check the upgrade documentation for the PeopleTools requirements for your specific upgrade path. For additional information on PeopleSoft Feature Packs, please go to My Oracle Support.
So if you are using the install files from Oracle Software Delivery Cloud for PeopleSoft Human Capital Management and Campus Solutions 9.0, you can only download the revision recut that is running on PeopleTools 8.52.03 and you can not downgrade to PeopleTools 8.49.
If you have your original installation files (HRMS 9.0 on PeopleTools 8.49), you can use these.
If you do not have your original installation files, you only option is to contact Oracle
Regards,
Hakan

Update 10.5.6 Cannot log into POP email account

After the upgrade to 10.5.6 I cannot log into my email account anymore. I get a message saying that the mail server does not recognize user or password. My wife has an account with the same provider and it works, however, when she tried to create a test account with the same information she gets the same behavior. Additionally I cannot see any of the email previously stored locally, the folders are there but they are empty. Any help would be appreciated
Steven
PS. We have tried deleting the plist in Preferences and a few other things suggested in this discussion thread already, nothing works.

This issue may be closed.
The correct account information was entered, but the preferences file (com.apple.mail.plist) was freshly saved upon closing Mail, ie., the original, corrupt Mail preferences file was retained, so Mail would not connect to the account.
When I closed Mail and deleted the preference file (com.apple.mail.plist) Mail was then able to connect to my account and download. I was also able to Import email from a previous version of OS X and this mail was imported to an "Import" folder.

System cannot log into domain

Have a 2003 server that crashed, both hard drives went bad at the same time. (Mirror), so was able to ghost the drives to a new drive, run the windows repair (1st screen) and was able to get the system back up and running, only thing is that when i booted
the first time, an error popped up that the netlogin service was not running, so i logged into the server, (local machine, not domain) and started the service and set to automatic. Now when i boot, i try to log into the server and it shows the domain in the
drop down box, but says "the system cannot log you in because the domain XXXXXX is not available. I don't really want to have to create all the users again and the permissions. any ideas? Thanks in advance.

Hi,
You referred “so i logged into the server, (local machine, not domain)”, but at last you said “I don't really want to have to create all the users again and the permissions”.
I’m a bit confused, can you elaborate it?
The error indicates connectivity issue between DC and client.
Run nslookup, check if this domain name could be resolved.
Ping DC, make sure you can get to DC.
Hope this helps.

Unable to log into wiki - server setup generals

Hallo!
I am new to SL Server problems and would like to know how to set up a wiki server and ical server properly.
Is there a short manual for this? The manuals by apple dont realy tell me anything specific.
For example i cannot log into my wiki with a given account.
And the ical server utility does not find an account or so.. but i can use a calender from a user i created...
Kind regards
Michael

Using OS X 10.6.8 you can update to 10.8 mountain lion, if you meet the hardware requirements.
From there on you can install OS X Server, when you meet het additional requirements.
OS X Server doesn't have a learning curve compared to Snow Leopard server, it costs a fraction

Cn=orcladmin cannot log into OID Self Service Console

Dear All 1!!
I synchronized my Microsoft AD users with Oracle Internet Directory server, and configure these users for external authentication through the use of plug-in. Every thing was running fine, unless i disabled the plug-in to enable it later again. After this activity, my orcladmin cannot log into the OID Self service console, however the migrated users can successfully log in. I can still log into the Oracle Directory manager with orcladmin.
Is there something specific i need to do to enable orcladmin to log into the self service console again.
Regards,
SwapSawe.

Hi All !!!
I resolved this one, it was easy, wonder how did i miss it. The solution is to open the Oracle Directory Manager, traverse to Pluin-Management, adwhencompare/adwhenbind -> Optional properties, and enter "(|(!(objectclass=orcladuser))(cn=orcladmin))" in Plug-in Entry properties. It required a system restart to work it well, just a restart for OID ias-component won't work.
Thanks for the look,
Regards,
Swapnil.

Cannot Log into Console DS 5.1

DS 5.1
OS Sun 9
I cannot log into the admin console. I have tried to change the encrypted password in the dse.ldif file and when I save the file with a blank one, I cannot login due to the "OK" button is greyed out. Can anyone suggest anything?
Thanks
Mike

Hi
This happens because you have manually modified the password in the configuration file, where you should not have done.
The only solution is to revert back to the old dse.ldif file and perform a ldapmodify command for changing the password.
If you still dont get the password fixed, you need to reinstall your Directory Server.
Thanks
Swaraj

Cannot log into old rooms

I cannot log into rooms anymore that have been created days ago. If I create a new room (e.g. ddd....), everything works fine. I does not work using server code or the room console (LCCS SDK Navigator, version 1.2.5). In the room console, I can log into the account (blocstac) and see all applications and rooms. When I select an old room (e.g. bbb...) and click "Enter Room", the hourglass runs forever. When I select ddd..., everything works fine.
The Java server throws:
com.adobe.rtc.util.RTCError: not-active
at com.adobe.rtc.account.AccountManager.checkStatus(AccountManager.java:907)
at com.adobe.rtc.account.AccountManager.publishItem(AccountManager.java:573)
It's a free devl account that has been only used for a few cents this month. Could you have a look?
Thanks,
Marc

Ok, it works again, thanks. Anything I could do that it does not happen again?
Marc

Cannot log into Icloud on my pc

I cannot log into Icloud with my pc I keep getting the error message :
Icloud encounter an error while trying to connect with the server.

Been looking for similar posts, surprised I haven't found more, because I'm fairly certain that there is a current problem with some parts of Apple's server network: I have 3 iCloud accounts in Mail on my Macbook, and 1 of them (annoyingly, my main one) has not been able to connect for an hour or two. And both of the others wouldn't connect for a few minutes, but are now working again.
More suprising is that trying to log in to webmail (www.icloud.com) is giving a very unhelpful error message, suggesting the server is down. Everything else Internet is working fine for me, and haven't changed any settings, so fairly sure problem is Apple's end.
It's possible that your iPhone is collecting your mail via a different server route that is still working; my three iCloud accounts are collecting via p02.imap.mail.me.com, p09.imap.mail.me.com and p99.imap.mail.me.com, and it's only p02 that's consistantly not working.

Cannot log into nokia support discussions

Cannot log into this site on my N900 or Ovi store.Both OK on my pc.
Anyone got any ideas.
Thanks

i had this problem before, let me guess you can't sign in with opera or firefox 2 .
anyway i think its just a server problem, with me it was fixed all by it self after some time.
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

I keep getting a message that I have logged into the server maximum times or server has timed out

I had an upgrade to my system and it changed my logging into the server to every 10 minutes. Can you reset it on your end so I can use my email again. We fixed the logging into the server so that will not happen again. I cannot send or receive emails on Thunderbird and I also get a connection to server has timed out when I try to send an email. Thanks

Update your Firefox to latest version
*www.Mozilla.org
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Cannot log into OpenDirectory server

Similar Messages

Maybe you are looking for