Cannot log into school after downloading Xmarks

I do online school and ever since I used and was a mistake I can no longer log in to my school not sure why please help

upgrade you brwoser to Firefox 9 and check
* getfirefox.com

Similar Messages

Cannot log into EM after install new DB

I have now installed, uninstalled and re-installed 10G about five times on my W2K laptop without being able to successfully start EM or log into a DB via SQLPlus, etc.
There are two issues I am experiencing:
1) If I am not connected to the web thru my laptop (online), I cannot even reference EM. I have set my internet connection to Never dial a connection so it will not keep prompting me to connect, but this has been to no avail. If I open my browser and work offline and try to use the link to EM, it will not let me--it will give me the standard web page not found, detect network settings, etc screen.
2) If I am online, the EM web page comes up and tells me that my DB is not started and that I have to login as SYSDBA to start it. Despite using the correct OS userid/pwd and oracle userid SYS/pwd for the database login, it continues to tell me that the userid is wrong!
I cannot log into the DB as sysdba or otherwise via SQLPLUS. I can do "sqlplus /nolog" to get into sqlplus but can't connect to anything--it gives me the TNS-adapter error: not found' error message.
Now, I just did a fresh install and used DBCA to create a starter DB called test. I do not see a listener but on my last install (same problems as now) when I created one thru Net Mgr or Net Config Asst, it didn't matter as it wouldn't allow it to start in my services. There was already a OracleOraDb10g_home1TNSListener service set to AUTOMATIC and my new one (which it called OracleOraDb10g_home1TNSListener1Test) was set to manual and could not be started. LSNRCTL said that the new listener was blocked, so I assumed that 10G was using the EZCONNECT naming method and did not need the new listener.
What gives? Any help would be very much appreciated as I am at a complete standstill.
Thanks!
Dave

Jeff,
Thanks for the info on policy settings.
Let's see: I had 8.1.5 installed and I tried the update to 10g but only works from 8.1.7 or 9i, so then uninstalled and re-tried to do fresh install in a different home (OraHome10 vs OraHome8). That didn't go so well--it changed my 8i somehow so 8i would no longer work. Then I tried fresh install of 9i with a new starter DB--couldn't get into that DB. So uninstalled 9i, uninstalled 10g, uninstalled 8i, deleted every reference to Oracle on my computer, registry, etc., and re-tried 10g. I even went and bought a registry cleaning tool to zap things to make sure it was clean. It looked like it installed fine, provided me with starter DB but I just can't get into it. I'll let you know if the policy setting works.
I'm trying to look on the bright-side and say that we are learning a lot!
Dave

Cannot log into mail after move from mobile me

Just upgraded to iCloud. After the move, the mail application cannot sign into the new iCloud mail account. I can log into the browser, and I can see emails there. But the mail application on my mac pops up a dialog saying that the password was rejected. What now?

Hi
This bit:
" . . . mail SACL is not enabled; error = 2 . . ."
is telling you Service Access Control List (SACL) is not enabled for that user. You can either do this using Server Admin > Server Name > Access or using the Server App > Users > select the User > click on the Gearwheel > Edit Access to Services. Tick the box.
If you create users using WGM no services are enabled for that User by default. If you use the Server App to create users, services should be enabled by default for that user. It's recommended you always use the Server App to create Users and Groups.
HTH?
Tony

Cannot log into NI1742 after it is set to automated inspection

Hello
I have in my possession a NI1742 Smart Camera. Once I set the camera to full automation, I
cannot log back into the camera through the Ethernet port.
The steps I have done:
Go to the Target Tab
--> Target Options --> Startup --> Start Inspection when
launched
The only way I was able to disable the automated inspection is
by resetting the camera. However this
deletes the uploaded program.
I have the standard manual. Is there another manual that I'm not reading?
Thanks

You cannot have a popup window work in a Run LV step when run on a target. The VI is actually run on the target, so you won't see the VI on your host machine. This is why the User Input step is not available for RT targets. I like your tab control to show the different states and achieve a popup like experience. One thing that could save some memory is to remove all the Calculator steps you have before each Update Custom UI step. It looks like you are trying to set the tab control in this step (i.e. setting a property node to a constant), but it doesn't actually do anything (except take up memory and processor time) because the Set Custom UI step is what will actually change the tab control value. So deleting all the unnecessary steps should free up some memory and run faster.
To help with the target not being responsive when running in inspection mode, you should put a delay any place where the inspection could loop repeatedly very quickly. It looks like you have delays in lots of places, and I'm not sure all of them are needed, but at least you give plenty of time for target to respond to outside connection requests.
Another idea instead of trying to implement a bunch of user interaction in the UI running on the target is to make a UI on your host machine and use the new VBAI API to control just inspection that runs on the target. This way the target doesn't need to handle all the login/password/user interaction that is probably more natural to handle in Windows VI or C app where you can have popup dialogs, and based on the UI interaction on the host side, you use the API to tell the target to run an iteration of the inspection and you can set shared global variables before hand so when the target does run, it can use values set from the host side in the inspection. I realize this is a big change from the inspection you have already, but I think it could have a lot of advantages:
- VBAI focuses on what it does best...automated visual inspection and leaves UI interaction/admin logging in control to a programming languages that is easier to accomplish this (i.e.LabVIEW).
- Makes your inspection smaller so it takes up less memory and you don't have to worry about running out of memory as easily.
- Makes it easy for your application to grow and include multiple smart cameras/targets all controlled with one UI.
- Makes you inspection a lot easier to read so not so much of the state diagram has to deal with user access/password types of interaction.
Some of the down sides include:
- reworking inspection to seperate UI interaction and username/password log in code from visual inspection
- need to synchronize updating variables from host to target with UI interaction/logging in...shared variables work pretty well, but they are not meant to be deterministic or synchronous (i.e. no gaurntee that a variable you set first will be updated first on target, so even though you set params before you set a flag to start inspection, the start inspection flag may be updated on the target before the params are). There is a Flush Shared Variable VI that can help avoid this problem though, but just wanted to make sure you knew this was something to look out for and handle by using the Flush Variable VI.
Anyway, something to think about. Thanks for including your inspection, very helpful to see how you're using VBAI.
Thanks,
Brad

I cannot log into icloud after password reset on all devices

I recently reset my password for my apple id/icloud.
Now I cannot seem to log into any of my devices. iphone 6, ipad mini retina, and macbook pro retina.
on some devices I have been able to log out of the account but I can't seem to log back in. The ipad mini retina is having problems logging out of icloud.
Any help or ideas would be appreciated.

I am stuck in a loop on my ipad - I have followed the instructions in your article above - I keep trying to delete icloud but cannot because it still wants me to login with my old id/email which is then rejected because it no longer exists. STUCK. What am I to do? Now none of my Apple devices will sync and this is extremely irritating - to say the least.
I assume that I wont be able to access the backup on my computer either because of this - otherwise I would delete my ipad completely and start again - and I really cannot see why, in this age of hackers etc you wonderful APPLE people have not sorted this problem out.
I had to change my email addresses because someone with too much time on their hands hacked me. Now I appear to be stuck.
Please help.
Perse

Cannot log into iCloud after upgrading to Yosemite

I have 3 iCloud accounts on my mac for various family members but after the upgrade I cannot get the iCloud account to log in. It just keeps asking for the password.
Any ideas?
Dhiran

You must be logged in using the Apple ID used to purchase iPhoto or to set up your Mac - If you are logged in with the Apple ID that was used to purchase iPhoto or to set up the computer if it came preinstalled then quit iPhoto, backup your iPhoto library and drag the iphoto application to the trash (do not empty the trash yet) and then go to the App store and install iPhoto
If this does not allow you to upgrade then you need to contact App store support - link i son the right of the app store window
LN

I have another computer that a virus may have taken over and I cannot log into it anymore. I just downloaded Itunes on a new computer but most of my songs are not on there. Is there a way to still access or find those songs? Remotely or another way? I

I have another computer that a virus may have taken over and I cannot log into it anymore. I just downloaded Itunes on a new computer but most of my songs are not on there. Is there a way to still access or find those songs? Remotely or another way? Or do I need to take it to a tech to get my files off of my hard drive?

Edit > Preferences > Store check Music under Automatic Downloads.
Open the iTunes Store from left hand column, then select Purchasedfrom the column on the right, click the Not In My Library button and select the tunes you want to download again.
That said, you seem to be under a misapprehension as to how iTunes works, or at least how it has worked in the past. It has, until recently, been up to you take care of your purchases once they have been downloaded. You had a one-time download which you were reminded to back up. With the recent change to this policy you can at least download your store purchases again, but having a personal backup of your iTunes store purchases, stuff purchased elsewhere and files ripped from your CDs will still be preferable to gathering all the stuff together again in the event of a disaster.
For a backup strategy see this User Tip.
tt2

After upgrading to mavericks i cannot log into my VPN using RDC

After upgrading to mavericks i cannot log into my desktop at work using Remote Desktop Connection for Mac
I get a message that The computer i am triyng to connect to cannot establish my identity
What to do?

You don't need to go to the App Store to for support for Steam and Minecraft. You need to go to their website(s).
You're welcome

I cannot log into user account with old password after using migration assistant.

I used Migration Assistant to move only my Settings and Users from my Power PC (User name RLE 5) to my Mac Pro. Because of what I have read in these forums I did not migrate applications or and files/folders. I will do that manually. After migrating I tried logging in to my user account RLE 5 on my Mac Pro, but it is telling me I am using the wrong password. I used the same password I used on my Power PC, but with no luck. On my Mac Pro I went into System Preferences>Accounts>RLE 5 account and changed the password. I then rebooted and tried again. No luck.
Can somebody help me with this problem?
Thank you.

What you propose would not solve the problem I am having. I must not have been clear about it. So I will elaborate.
I have a Power PC with 10.5.8. The admin user account name is RLE 5. I need a password to log into my root user account on my Power PC.
Then I bought a used Mac Pro with a clean install of 10.7.5 and no password set up yet for my admin user account. The admin user account name is Mac Pro. When I turn on the computer it opens to my admin user account where I have access to everything.
I used Migrations Assistant to move my Settings and Users from my Power PC to my Mac Pro. That seemed to to successfully.
So I now have four users on my Mac Pro: RLE 5 (the admin user from my Power PC with the password), Mac Pro (my admin user which does not require a password), and two guest user accounts.
I turn on my Mac Pro and it opens to my Mac Pro admin user account. I don't need to sign in. No problem.
I log out of Mac Pro. On my screen are the four user accounts. I click on RLE 5 (which was my admin user account on my Power PC that I migrated over to my Mac Pro) to log into that account and it asks me for a password. I type in the password I used for my Power PC. It keeps telling me it is the incorrect password.
I cannot log into my user account RLE 5 on the Mac Pro. I am being told I have the incorrect password. I've gone to System Preferences>Accounts and changed the password. It doesn't make a difference.
Also I cannot log into the Guest User account that migrated from the Power PC to the Mac Pro for the same reason. I have also tried to change the password for that Guest User account also but with no luck.
Another interesting thing has happened. I decided to give my Mac Pro admin user account a password by going to System Preferences>Accounts. But when I do a test to sign into my admin user account Mac Pro it tells me it is the wrong password. Luckily I can reboot the computer and it opens to my Mac Pro user without asking for a password. But if I log out of Mac Pro and try to then sign back in with the password it tells me it is the incorrect password.
Any suggestions would be appreciated.

After 11.1 and ios 7 update, cannot log into ipad. says apple ID already in use. no issues prior to updates.

After 11.1 and ios 7 update, cannot log into ipad. says apple ID already in use. no issues prior to updates.tried both primary and backup emails. says both already in use

randers4, thank you for the suggestions.
1) I have contacted Verizon and they are not blocking "premium" or 3rd party text messages.
2) The Apple ID login issue occurs regardless of wi-fi network location, or even if I am not on wi-fi at all. Router settings are irrelevant to this problem.
3) I have already played around extensively with date and time settings. This did not fix any issues.
Any other suggestions? I had another call with Apple support and they are of the opinion that I may need to have the phone totally replaced, which is unacceptable unless it is free of charge.

Cannot log into my iCloud after resetting apple id password.

I can't log into my iCloud after resetting apple id password. Any solutions for this?

Need a little more info. You reset your Apple/iCloud ID, and you cannot log into iCloud where? What is the error?
Cheers,
GB

Downloaded mavericks, now I cannot log into my computer???

downloaded mavericks, now I cannot log into my computer???

I finally figured it out. I had always been able to login with just my Account Name. Now I have to use the email address of the account name. Not sure why that is. So I just added "@xxxx.com" to the Account Name and now it works. I don't have an a Mobileme associated with the Account Name.

Update 10.5.6 Cannot log into POP email account

After the upgrade to 10.5.6 I cannot log into my email account anymore. I get a message saying that the mail server does not recognize user or password. My wife has an account with the same provider and it works, however, when she tried to create a test account with the same information she gets the same behavior. Additionally I cannot see any of the email previously stored locally, the folders are there but they are empty. Any help would be appreciated
Steven
PS. We have tried deleting the plist in Preferences and a few other things suggested in this discussion thread already, nothing works.

This issue may be closed.
The correct account information was entered, but the preferences file (com.apple.mail.plist) was freshly saved upon closing Mail, ie., the original, corrupt Mail preferences file was retained, so Mail would not connect to the account.
When I closed Mail and deleted the preference file (com.apple.mail.plist) Mail was then able to connect to my account and download. I was also able to Import email from a previous version of OS X and this mail was imported to an "Import" folder.

Cannot log into my yahoo mail account from my iphone4.

I cannot log into my yahoo mail account from my iphone4. The password does not have any special characters. On my PC there is no problem.
Also cannot configure Add Yahoo mail. I woould get a message, stating "Verification required. Log into your Yahoo! account at www.yahoo.com". when I attempt this I get "Invalid ID/Password".

Tried eveyrhting and this was the way that fixed it for me --
if you are having an issue adding the yahoo mail account on an iphone/ ipad / ipod.
In the app store download the yahoo mail app for iphone (it works on ipads and ipods as well.. but there's only an iphone version). After downloading it - open and sign in. It's likely it will say that your yahoo account is 'locked' due to suspicious activity - follow the prompts to unlock it.
Now add the yahoo account under the ipad mail settings.
It should work in the regular ipad, iphone, ipod mail application now.
Hope this helps

HT5616 i cannot log into icloud

cannot log into icloud with my apple id on my macbook. says wrong id

MobileMe was closed over a year ago and was replaced by iCloud. Even though you still have that setting it will no longer function.
You will need to upgrade to OS X Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion and Mavericks requirements are the same, as listed here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can download a free upgrade from the Mac App Store. If your system can only run Lion, you can go here to purchase a redemption code to download it from the Mac App Store. If you prefer Mountain Lion for software compatibility reasons, you can go here to purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing applications by checking here: http://roaringapps.com/apps:table. Also be aware that older PPC programs such as AppleWorks and Office 2004 for Mac will not run on OS X Lion or higher.

Cannot log into school after downloading Xmarks

Similar Messages

Maybe you are looking for